mirror/openwrt
1
0
Fork 1
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2026-03-14 23:09:45 +01:00
Code Issues Projects Releases Packages Wiki Activity Actions 1
openwrt/target/linux/mediatek/dts
History
Qing W. 1748ce8295 mediatek: add support for WAVLINK WL-WN536AX6 Rev a 
Product name: Wavlink WL-WN536AX6 Rev a "Mighty LX2"
Product link: https://www.wavlink.com/en_us/product/WL-WN536AX6.html

Specifications:
SOC: MT7986AV
RAM: 512MB DDR4
Flash: 128MB SPI NAND
Ports: 4 LAN (1G) & 1 WAN (2.5G)
WIFI: MT7976PN + MT7975N
LEDs: 8 (STATUS, WIFI, WAN, LAN1, LAN2, LAN3, LAN4, PWR)
USB: 1 (3.0)

MAC table, same as stock firmware:
LAN: 80:3F:5D:xx:xx:x1 partition "hw" at 0x44e (ASCII)
WAN: 80:3F:5D:xx:xx:x2 partition "hw" at 0x460 (ASCII)
2G: 80:3F:5D:xx:xx:x3
5G: 80:3F:5D:xx:xx:x4

* Installation with OEM WebUI:

Note: Make sure PC is connected on LAN1 port. The OEM firmware has an unknown root password and settings are kept after upgrading firmware. Therefore, a customized Openwrt firmware is needed to remove the root password on login, by adding `passwd -d root` to /etc/init.d/bootcount. The WebUI does a filename check so the customized firmware is named accordingly.

1. Download modified firmware file `WAVLINK_WN536AX6-A_M36AX6_V250320-WO-437baca-modified.bin` from https://github.com/ses1er/firmware-misc/tree/main/wavlink/wl-wn536ax6a
2. Log into WebUI on default IP: http://192.168.20.1
3. Browse to More (top menu) -> System -> Firmware Upgrade.
4. Under `Local Upgrade` section, check the device to be upgraded and upload downloaded modified firmware. Click `UPLOAD FILE`, then `APPLY`
5. Wait about 2 minutes (ignore progress bar), and browse to http://192.168.20.1. You should see LUCI login page. Username is root and no password.
6. Browse to `System -> Backup/Flash Firmware`, click on `Flash Image`, click `Browse` and locate `openwrt-mediatek-filogic-wavlink_wl-wn536ax6-a-squashfs-sysupgrade.bin` file.
7. Uncheck `Keep settings and retain the current configuration` and click `Continue`.
8. Router will now be set to IP 192.168.1.1 which is the Openwrt default.

* Installation with UART:

Note: Having UART connected while cold booting the device will result in a kernel panic when initializing wifi. I've found this workaround:
1. Power off the device and ensure UART is not connected to PC.
2. Power up the device, when lights come on, plug in UART.
3. Warm boots and soft restarts will not cause kernel panic for the duration of device being powered on. Repeat steps for subsequent cold boots.

1. Configure TFTP server with IP 192.168.1.66. Copy `openwrt-mediatek-filogic-wavlink_wl-wn536ax6a-initramfs.itb` to TFTP root.
2. Interrupt boot by pressing 0.
3. Run the following in Uboot console: `setenv serverip 192.168.1.66; setenv ipaddr 192.168.1.1; tftpboot 0x46000000 openwrt-mediatek-filogic-wavlink_wl-wn536ax6-a-initramfs.itb; bootm`
4. Transfer `openwrt-mediatek-filogic-wavlink_wl-wn536ax6-a-squashfs-sysupgrade.bin` to device:
   (`scp -O openwrt-mediatek-filogic-wavlink_wl-wn536ax6-a-squashfs-sysupgrade.bin root@192.168.1.1:/tmp/`)
5. Run the following on device: `sysupgrade -n /tmp/openwrt-mediatek-filogic-wavlink_wl-wn536ax6-a-squashfs-sysupgrade.bin`

Signed-off-by: Qing W. <ses1er@gmail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://github.com/openwrt/openwrt/pull/20760
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2025-11-24 00:43:13 +01:00
..
mt7622-asiarf-ap7622-wh1.dts mediatek: ap7622-wh1: Enable bluetooth interface 2025-09-26 11:57:33 +02:00
mt7622-buffalo-wsr-2533dhp2.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7622-buffalo-wsr-3200ax4s.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7622-buffalo-wsr.dtsi mediatek: drop redundant label with new LED color/function format 2024-02-07 14:48:39 +01:00
mt7622-dlink-eagle-pro-ai-ax3200-a1.dtsi treewide: replace numbers with GPIO_ACTIVE 2025-10-08 14:26:24 +02:00
mt7622-dlink-eagle-pro-ai-m32-a1.dts mediatek: Add support for D-Link EAGLE PRO AI R32 2024-01-02 21:22:46 +01:00
mt7622-dlink-eagle-pro-ai-r32-a1.dts mediatek: Add support for D-Link EAGLE PRO AI R32 2024-01-02 21:22:46 +01:00
mt7622-elecom-wrc-2533gent.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7622-elecom-wrc-x3200gst3.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7622-linksys-e8450-ubi.dts mediatek: fix wrong compatible string 2024-10-06 21:56:04 +02:00
mt7622-linksys-e8450.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-linksys-e8450.dtsi treewide: replace numbers with GPIO_ACTIVE 2025-10-08 14:26:24 +02:00
mt7622-netgear-wax206.dts mediatek: mt7622: fix 2.5G WAN port on Netgear WAX206 2025-10-31 09:58:28 +00:00
mt7622-reyee-ax3200-e5.dts mediatek: Update mt7622-reyee-ax3200-e5.dts 2025-03-15 13:48:00 +01:00
mt7622-rfb1-ubi.dts mediatek: re-enable mt7622-rfb1-ubi with changed partition layout 2024-02-28 09:59:43 +01:00
mt7622-ruijie-rg-ew3200.dtsi mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7622-ruijie-rg-ew3200gx-pro.dts mediatek: also move &slot0 from dtsi down to board dts 2022-12-07 01:45:14 +00:00
mt7622-smartrg-SDG-841-t6.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7622-totolink-a8000ru.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7622-ubnt-unifi-6-lr-v1-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7622-ubnt-unifi-6-lr-v1.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-ubnt-unifi-6-lr-v1.dtsi treewide: enable-gpio to enable-gpios 2025-10-08 14:26:24 +02:00
mt7622-ubnt-unifi-6-lr-v2-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7622-ubnt-unifi-6-lr-v2.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-ubnt-unifi-6-lr-v2.dtsi mediatek: add support for Ubiquiti UniFi 6 LR v3 2023-08-28 16:35:22 +01:00
mt7622-ubnt-unifi-6-lr-v3-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7622-ubnt-unifi-6-lr-v3.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-ubnt-unifi-6-lr-v3.dtsi mediatek: add support for Ubiquiti UniFi 6 LR v3 2023-08-28 16:35:22 +01:00
mt7622-ubnt-unifi-6-lr.dtsi mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7622-xiaomi-redmi-router-ax6s.dts mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7623a-unielec-u7623-02-emmc-512m.dts mediatek: u7623-02: enable early console also in legacy image 2022-01-31 00:10:38 +00:00
mt7623a-unielec-u7623-02.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7623a-unielec-u7623-02.dtsi mediatek: mt7623: fix mmc dtc warnings 2025-05-19 20:01:00 +08:00
mt7629-iptime-a6004mx.dts treewide: replace numbers with GPIO_ACTIVE 2025-10-08 14:26:24 +02:00
mt7629-linksys-ea7500-v3.dts treewide: replace numbers with GPIO_ACTIVE 2025-10-08 14:26:24 +02:00
mt7629-netgear-ex6250-v2.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7629-tplink_eap225-v5.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7981a-comfast-cf-e393ax.dts mediatek: dts: remove useless SPI cs-gpios property 2025-10-20 00:28:15 +02:00
mt7981a-edgecore-eap111.dts mediatek: dts: remove useless SPI cs-gpios property 2025-10-20 00:28:15 +02:00
mt7981a-glinet-gl-x3000-xe3000-common.dtsi mediatek: dts: convert pinctrl bias to the Linux generic style 2025-08-24 13:22:08 +02:00
mt7981a-glinet-gl-x3000.dts mediatek: Add support for GL.iNet X3000 (Spitz AX) and XE3000 (Puli AX) 2024-03-13 20:47:23 +00:00
mt7981a-glinet-gl-xe3000.dts mediatek: Add support for GL.iNet X3000 (Spitz AX) and XE3000 (Puli AX) 2024-03-13 20:47:23 +00:00
mt7981a-teltonika-rutc50.dts mediatek: filogic: add Teltonika RUTC50 support 2025-08-24 17:54:04 +02:00
mt7981a-ubnt-unifi-6-plus.dts mediatek: filogic: load precal data for Unifi 6 Plus 2025-09-27 00:32:40 +02:00
mt7981b-abt-asr3000.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-asus-rt-ax52.dts treewide: replace numbers with GPIO_ACTIVE 2025-10-08 14:26:24 +02:00
mt7981b-cetron-ct3003.dts mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7981b-cmcc-a10-stock.dts mediatek: add support for CMCC A10 2025-03-08 15:44:56 +01:00
mt7981b-cmcc-a10-ubootmod.dts mediatek: add support for CMCC A10 2025-03-08 15:44:56 +01:00
mt7981b-cmcc-a10.dtsi mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-cmcc-rax3000m-emmc.dtso mediatek: filogic: fix mmc dtc warnings 2025-05-19 20:00:59 +08:00
mt7981b-cmcc-rax3000m-nand.dtso mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-cmcc-rax3000m.dts mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7981b-comfast-cf-wr632ax-common.dtsi mediatek: add support for COMFAST CF-WR632AX 2025-11-09 19:33:18 +01:00
mt7981b-comfast-cf-wr632ax-ubootmod.dts mediatek: add support for COMFAST CF-WR632AX 2025-11-09 19:33:18 +01:00
mt7981b-comfast-cf-wr632ax.dts mediatek: add support for COMFAST CF-WR632AX 2025-11-09 19:33:18 +01:00
mt7981b-confiabits-mt7981.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-creatlentem-clt-r30b1-112m.dts mediatek: add support for CreatLentem CLT-R30B1 2025-08-08 18:12:50 +02:00
mt7981b-creatlentem-clt-r30b1-common.dtsi mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7981b-creatlentem-clt-r30b1.dts mediatek: add support for CreatLentem CLT-R30B1 2025-08-08 18:12:50 +02:00
mt7981b-cudy-ap3000-v1.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-cudy-ap3000outdoor-v1.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-cudy-m3000-v1.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-cudy-re3000-v1.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-cudy-tr3000-256mb-v1.dts mediatek: add support for Cudy TR3000 256MB v1 flash version 2025-06-22 19:17:25 +02:00
mt7981b-cudy-tr3000-v1-ubootmod.dts mediatek: add ubootmod layout for cudy tr3000 v1 2025-05-27 19:56:55 +08:00
mt7981b-cudy-tr3000-v1.dts mediatek: add ubootmod layout for cudy tr3000 v1 2025-05-27 19:56:55 +08:00
mt7981b-cudy-tr3000-v1.dtsi mediatek: add ubootmod layout for cudy tr3000 v1 2025-05-27 19:56:55 +08:00
mt7981b-cudy-wr3000-nand.dtsi mediatek: Create common DTSI for WR3000H and WR3000S 2025-06-05 21:13:24 +02:00
mt7981b-cudy-wr3000-v1.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-cudy-wr3000e-v1.dts mediatek: filogic: add support for Cudy WR3000E v1 2025-06-07 18:07:03 +02:00
mt7981b-cudy-wr3000h-v1.dts mediatek/filogic: fix Cudy WR3000H ethernet port order 2025-11-09 23:07:59 +01:00
mt7981b-cudy-wr3000p-v1.dts mediatek: filogic: add support for Cudy WR3000P v1 2025-09-07 14:44:35 +02:00
mt7981b-cudy-wr3000s-v1.dts mediatek: Create common DTSI for WR3000H and WR3000S 2025-06-05 21:13:24 +02:00
mt7981b-dlink-aquila-pro-ai-m30-a1.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-elecom-wrc-x3000gs3.dts mediatek: add missing #address/size-cells for ELECOM WRC-X3000GS3 2025-07-26 15:41:23 +02:00
mt7981b-gatonetworks-gdsp-gps.dtso mediatek: filogic: add SD card support to GatoNetworks GDSP 2025-07-18 12:36:39 +01:00
mt7981b-gatonetworks-gdsp-sd-boot.dtso mediatek: dts: fix some minor dtc warnings 2025-08-24 13:22:09 +02:00
mt7981b-gatonetworks-gdsp-sd.dtso mediatek: filogic: add SD card support to GatoNetworks GDSP 2025-07-18 12:36:39 +01:00
mt7981b-gatonetworks-gdsp.dts treewide: replace numbers with GPIO_ACTIVE 2025-10-08 14:26:24 +02:00
mt7981b-glinet-gl-mt2500-v1.dts mediatek: filogic: fix for new GL.iNet GL-MT2500/GL-MT2500A hardware revision 2025-06-03 23:19:35 +02:00
mt7981b-glinet-gl-mt2500-v2.dts mediatek: filogic: fix for new GL.iNet GL-MT2500/GL-MT2500A hardware revision 2025-06-03 23:19:35 +02:00
mt7981b-glinet-gl-mt2500.dtsi mediatek: dts: convert pinctrl bias to the Linux generic style 2025-08-24 13:22:08 +02:00
mt7981b-glinet-gl-mt3000.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-h3c-magic-nx30-pro.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-huasifei-wh3000-pro.dts mediatek: add Huasifei WH3000 Pro support 2025-07-12 19:31:54 +02:00
mt7981b-huasifei-wh3000.dts mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7981b-imou-hx21.dts mediatek: add support for Imou HX21 2025-11-21 01:43:09 +01:00
mt7981b-iptime-ax3000m.dts mediatek: add missing eeprom for ipTIME AX3000M 2025-09-14 12:52:24 +02:00
mt7981b-iptime-ax3000q.dts mediatek: dts: fix some minor dtc warnings 2025-08-24 13:22:09 +02:00
mt7981b-iptime-ax3000se.dts mediatek: add support for ipTIME AX3000SE 2025-11-20 23:10:11 +01:00
mt7981b-iptime-ax3000sm.dts mediatek: dts: fix some minor dtc warnings 2025-08-24 13:22:09 +02:00
mt7981b-jcg-q30-pro.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-keenetic-kn-3711.dts treewide: fix mistaken executable bit on dts files 2025-11-06 22:14:56 +01:00
mt7981b-keenetic-kn-3811.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-keenetic-kn-3911.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-konka-komi-a31.dts mediatek: add Konka KOMI A31 support 2025-10-23 00:00:04 +02:00
mt7981b-mercusys-mr80x-v3.dts mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7981b-netis-nx31.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-nokia-ea0326gmp.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-nradio-c8-668gl.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-openembed-som7981.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-openfi-6c.dts treewide: gpio to gpios 2025-10-08 14:26:24 +02:00
mt7981b-openwrt-one.dts mediatek: dts: remove useless SPI cs-gpios property 2025-10-20 00:28:15 +02:00
mt7981b-qihoo-360t7.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-routerich-ax3000-common.dtsi mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7981b-routerich-ax3000-ubootmod.dts mediatek: Routerich AX3000: add OpenWrt U-Boot layout 2024-11-24 23:41:02 +01:00
mt7981b-routerich-ax3000-v1.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-routerich-ax3000.dts mediatek: Routerich AX3000: add OpenWrt U-Boot layout 2024-11-24 23:41:02 +01:00
mt7981b-snr-snr-cpe-ax2.dts mediatek: dts: remove some useless spaces 2025-08-24 13:22:09 +02:00
mt7981b-tenbay-wr3000k.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-totolink-x6000r.dts mediatek: filogic: add support for Totolink X6000R 2025-09-21 15:49:15 +02:00
mt7981b-tplink-fr365v1.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-unielec-u7981-01-emmc.dts mediatek: filogic: fix mmc dtc warnings 2025-05-19 20:00:59 +08:00
mt7981b-unielec-u7981-01-nand.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-unielec-u7981-01.dtsi mediatek: remove loglevel in bootargs 2025-08-11 10:40:26 +02:00
mt7981b-wavlink-wl-3port-128nand-common.dtsi mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-wavlink-wl-wn551x3.dts mediatek: dts: remove some useless spaces 2025-08-24 13:22:09 +02:00
mt7981b-wavlink-wl-wn573hx3.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-wavlink-wl-wn586x3.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-wavlink-wl-wn586x3b.dts mediatek: filogic: support WAVLINK WL-WN586X3 Rev B 2025-08-24 15:50:46 +02:00
mt7981b-xiaomi-mi-router-ax3000t-ubootmod.dts mediatek: filogic: convert Xiaomi AX3000T to fitblk 2024-08-28 15:11:51 +01:00
mt7981b-xiaomi-mi-router-ax3000t.dts mediatek: fix nmbm configuration mismatch (Xiaomi AX3000t) 2025-02-07 09:04:35 +01:00
mt7981b-xiaomi-mi-router-ax3000t.dtsi mediatek: filogic: add support for Xiaomi AX3000T 2024-01-06 17:51:11 +01:00
mt7981b-xiaomi-mi-router-common.dtsi mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7981b-xiaomi-mi-router-wr30u-stock.dts mediatek: filogic: add support for Xiaomi WR30U 2023-07-27 13:46:16 +02:00
mt7981b-xiaomi-mi-router-wr30u-ubootmod.dts mediatek: filogic: convert Xiaomi WR30U to fitblk 2024-08-28 15:11:51 +01:00
mt7981b-xiaomi-mi-router-wr30u.dtsi mediatek: filogic: add support for Xiaomi AX3000T 2024-01-06 17:51:11 +01:00
mt7981b-yuncore-ax835.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-zbtlink-zbt-z8102ax-v2.dts mediatek: fix ubi size for zbtlink zbt z8102ax v2 2025-11-20 23:26:29 +01:00
mt7981b-zbtlink-zbt-z8102ax.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-zbtlink-zbt-z8103ax.dts mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7981b-zyxel-nwa50ax-pro.dts mediatek: filogic: use NVMEM for wifi macaddr on NWA50AX Pro 2025-09-10 22:57:49 +02:00
mt7986a-acelink-ew-7886cax.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-acer-predator-w6.dts mediatek: filogic: PHY LEDs do have an address, gpio-leds don't 2025-03-21 01:19:19 +00:00
mt7986a-acer-predator-w6d.dts mediatek: filogic: PHY LEDs do have an address, gpio-leds don't 2025-03-21 01:19:19 +00:00
mt7986a-acer-predator-w6x-stock.dts mediatek: Add support for Acer Predator Connect W6x Ubootmod 2025-10-31 09:40:07 +00:00
mt7986a-acer-predator-w6x-ubootmod.dts mediatek: Add support for Acer Predator Connect W6x Ubootmod 2025-10-31 09:40:07 +00:00
mt7986a-acer-predator-w6x.dtsi mediatek: Add support for Acer Predator Connect W6x Ubootmod 2025-10-31 09:40:07 +00:00
mt7986a-acer-vero-w6m.dts mediatek: add support for Acer Predator W6d and Acer Vero W6m 2024-11-23 19:33:42 +01:00
mt7986a-acer-w6-common.dtsi mediatek: dts: remove mt7531 switch reset delay time properties 2025-08-24 13:22:09 +02:00
mt7986a-asiarf-ap7986-003.dts mediatek: filogic: add support for AsiaRF AP7986-003 2025-09-20 19:13:47 +02:00
mt7986a-asus-rt-ax59u.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-asus-tuf-ax4200.dts mediatek: dts: remove mt7531 switch reset delay time properties 2025-08-24 13:22:09 +02:00
mt7986a-asus-tuf-ax6000.dts mediatek: dts: remove mt7531 switch reset delay time properties 2025-08-24 13:22:09 +02:00
mt7986a-bananapi-bpi-r3-mini.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-dlink-aquila-pro-ai-m60-a1.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-glinet-gl-mt6000.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-iptime-ax7800m-6e.dts mediatek: use dt-bindings drive strength macros for ipTIME AX7800M-6E 2025-11-23 22:32:48 +01:00
mt7986a-jdcloud-re-cp-03.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-netcore-n60-pro.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-netcore-n60.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-ruijie-rg-x60-pro.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-smartrg-bonanza-peak.dtsi mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-smartrg-SDG-8612.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-smartrg-SDG-8614.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-smartrg-SDG-8622.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-smartrg-SDG-8632.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-tplink-archer-ax80-v1.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-tplink-tl-xdr-common.dtsi mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-tplink-tl-xdr4288.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-tplink-tl-xdr6086.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-tplink-tl-xdr6088.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-tplink-tl-xtr8488.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-wavlink-wl-wn536ax6-a.dts mediatek: add support for WAVLINK WL-WN536AX6 Rev a 2025-11-24 00:43:13 +01:00
mt7986a-xiaomi-redmi-router-ax6000-stock.dts mediatek: add new layout for Xiaomi Redmi Router AX6000 for OpenWrt U-Boot 2022-12-29 03:00:31 +00:00
mt7986a-xiaomi-redmi-router-ax6000-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7986a-xiaomi-redmi-router-ax6000.dtsi mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-zyxel-ex5601-t0-common.dtsi mediatek: dts: remove useless SPI cs-gpios property 2025-10-20 00:28:15 +02:00
mt7986a-zyxel-ex5601-t0-stock.dts mediatek: filogic: Zyxel EX5601-T0 dts cleanup 2025-09-11 00:11:30 +02:00
mt7986a-zyxel-ex5601-t0-ubootmod.dts mediatek: filogic: Zyxel EX5601-T0 dts cleanup 2025-09-11 00:11:30 +02:00
mt7986a-zyxel-ex5700-telenor.dts mediatek: dts: remove useless SPI cs-gpios property 2025-10-20 00:28:15 +02:00
mt7986b-buffalo-wsr-6000ax8.dts mediatek: add support for Buffalo WSR-6000AX8 and AX8P 2025-09-22 00:57:51 +02:00
mt7986b-mercusys-mr90x-v1-common.dtsi mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986b-mercusys-mr90x-v1-ubi.dts mediatek: filogic: fix WiFi MAC address invalid length dtc warnings 2025-05-19 20:01:00 +08:00
mt7986b-mercusys-mr90x-v1.dts mediatek: MERCUSYS MR90X v1: add OpenWrt U-Boot (UBI) layout 2024-11-30 18:36:05 +01:00
mt7986b-netgear-wax220.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986b-tplink-re6000xd.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7987.dtsi mediatek: build image for MT7987 RFB 2025-11-05 14:19:40 +00:00
mt7987a-bananapi-bpi-r4-lite-1pcie-2L.dtso mediatek: add support for BananaPi BPi-R4 Lite 2025-11-05 14:19:40 +00:00
mt7987a-bananapi-bpi-r4-lite-2pcie-1L.dtso mediatek: add support for BananaPi BPi-R4 Lite 2025-11-05 14:19:40 +00:00
mt7987a-bananapi-bpi-r4-lite-emmc.dtso mediatek: add support for BananaPi BPi-R4 Lite 2025-11-05 14:19:40 +00:00
mt7987a-bananapi-bpi-r4-lite-mikrobus.dtsi mediatek: add support for BananaPi BPi-R4 Lite 2025-11-05 14:19:40 +00:00
mt7987a-bananapi-bpi-r4-lite-nand.dtso mediatek: add support for BananaPi BPi-R4 Lite 2025-11-05 14:19:40 +00:00
mt7987a-bananapi-bpi-r4-lite-nor.dtso mediatek: add support for BananaPi BPi-R4 Lite 2025-11-05 14:19:40 +00:00
mt7987a-bananapi-bpi-r4-lite-sd.dtso mediatek: add support for BananaPi BPi-R4 Lite 2025-11-05 14:19:40 +00:00
mt7987a-bananapi-bpi-r4-lite.dts mediatek: add support for BananaPi BPi-R4 Lite 2025-11-05 14:19:40 +00:00
mt7987a-rfb-emmc.dtso mediatek: build image for MT7987 RFB 2025-11-05 14:19:40 +00:00
mt7987a-rfb-eth0-an8801sb.dtso mediatek: build image for MT7987 RFB 2025-11-05 14:19:40 +00:00
mt7987a-rfb-eth0-an8855.dtso mediatek: build image for MT7987 RFB 2025-11-05 14:19:40 +00:00
mt7987a-rfb-eth0-e2p5g.dtso mediatek: build image for MT7987 RFB 2025-11-05 14:19:40 +00:00
mt7987a-rfb-eth0-mt7531.dtso mediatek: build image for MT7987 RFB 2025-11-05 14:19:40 +00:00
mt7987a-rfb-eth1-i2p5g.dtso mediatek: build image for MT7987 RFB 2025-11-05 14:19:40 +00:00
mt7987a-rfb-eth2-an8801sb.dtso mediatek: build image for MT7987 RFB 2025-11-05 14:19:40 +00:00
mt7987a-rfb-eth2-e2p5g.dtso mediatek: build image for MT7987 RFB 2025-11-05 14:19:40 +00:00
mt7987a-rfb-eth2-sfp.dtso mediatek: build image for MT7987 RFB 2025-11-05 14:19:40 +00:00
mt7987a-rfb-eth2-usb.dtso mediatek: build image for MT7987 RFB 2025-11-05 14:19:40 +00:00
mt7987a-rfb-sd.dtso mediatek: build image for MT7987 RFB 2025-11-05 14:19:40 +00:00
mt7987a-rfb-spim-nand.dtso mediatek: build image for MT7987 RFB 2025-11-05 14:19:40 +00:00
mt7987a-rfb-spim-nor.dtso mediatek: build image for MT7987 RFB 2025-11-05 14:19:40 +00:00
mt7987a-rfb.dts mediatek: build image for MT7987 RFB 2025-11-05 14:19:40 +00:00
mt7987a.dtsi mediatek: build image for MT7987 RFB 2025-11-05 14:19:40 +00:00
mt7987b.dtsi mediatek: build image for MT7987 RFB 2025-11-05 14:19:40 +00:00
mt7988a-arcadyan-mozart.dts mediatek: cleanup device tree for mt7988 devices 2025-06-13 11:15:08 +02:00
mt7988a-smartrg-mt-stuart.dtsi mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7988a-smartrg-SDG-8733.dts mediatek: filogic: add Adtran SmartRG Mount Stuart series 2024-05-24 18:34:13 +01:00
mt7988a-smartrg-SDG-8734.dts mediatek: filogic: add Adtran SmartRG Mount Stuart series 2024-05-24 18:34:13 +01:00
mt7988d-asus-zenwifi-bt8-ubootmod.dts mediatek: cleanup device tree for mt7988 devices 2025-06-13 11:15:08 +02:00
mt7988d-asus-zenwifi-bt8.dts mediatek: dts: bring mt7988a.dtsi closer to upstream 2025-05-26 16:58:03 +01:00
mt7988d-asus-zenwifi-bt8.dtsi mediatek: dts: convert pinctrl bias to the Linux generic style 2025-08-24 13:22:08 +02:00
mt7988d-smartrg-SDG-8733A.dts mediatek: dts: bring mt7988a.dtsi closer to upstream 2025-05-26 16:58:03 +01:00
mt7988d-tplink-be450.dts mediatek: filogic: add support for TP-LINK BE450 2025-11-08 23:39:59 +01:00