The Gemini reference design-derived devices uses a partition
format which is predictable and we can exploit this to offer
some proper upgrade path.
The kernel for these contains a hack to use this partition
format unaltered by combining the partitions "Kern" and "Ramdisk"
to one image with all of the kernel+ramdisk in memory.
Then the "Application" which is used for the rootfs go into its
own partition.
Standard flash layout:
Kern 2048k |
Ramdisk 6144k | = 9216k
Application 6144k | = 15360k
Following the pattern of the factory image we create three
images named zImage, rd.gz and hddapp.tgz (these filenames
are misleading! They are just required by the old firmware.)
and flash each individually with "mtd" during upgrades.
Since the IB-4220-V has a different layout with a bigger kernel
space we parameterize this so we can handle this too. (More
fixes are needed for that device though.)
A way to upgrade older OpenWrt on these platforms to the latest
and greatest will be to copy the file
target/linux/gemini/base-files/lib/upgrade/platform.sh
to /lib/upgrade/platform.sh
on your running system and then run sysupgrade from the image
produced after this patch.
The script is picky to sanity check the partitions before
commencing upgrade.
This was tested with a full sysupgrade on the iTian SQ201.
Link: https://github.com/openwrt/openwrt/pull/21680
(cherry picked from commit 0b0cd4efe2)
Link: https://github.com/openwrt/openwrt/pull/21973
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add the required patches in order to backport cake-mq from Linux 7.0.
Many thanks to Toke Høiland-Jørgensen for providing the git trees with backports
for both 6.12 and 6.18.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21964
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 105eb9ca95)
Now that we have a board file, add calibration variant for TP-Link
TL-WA1201 v2 and add ipq-wifi package for it.
Tested-by: Jim McDonald <122668301+jimmyd998@users.noreply.github.com>
Signed-off-by: Christoph Krapp <achterin@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21736
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 0fa94cff86)
Link: https://github.com/openwrt/openwrt/pull/21951
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
These devices share the same "compatible" in device tree causing some
incompatibilities (sysupgrades, ASU profile identification), assign a
unique "compatible" and "model" to each variant.
Context:
Commit [1] added each variant's dts compatible to the SUPPORTED_DEVICES
field of the other variant to make easy sysupgrades between these
physically indistinguishable devices variants possible.
But there were found three issues which does not allow this:
- the sysupgrade's stricter check still used in some sysupgrade
paths(this check is being replaced(and redundant) with the newer fwtool's
SUPPORTED_DEVICES check using the info in images METADATA), this check
will fail when sysupgrading from a different board_name(compatible dts)
that the image was created for (image profile name).[2]
- ASU needs unique "dts compatible" to identify the devices profile.
- and an ASU's profile identification limitation when several devices from
a common target share SUPPORTED_DEVICES entries.[3]
There is a proposal for these issues but not yet implemented [4][3].
Until these issues are fixed we won't allow "easy" sysupgrades between
these two device variants.
Commit [5] avoided the ASU profile identification limitation but
missed the required two unique dts compatibles in order to make the two
variants fully work, although not allowing easy sysupgrade between them.
[1]: 8d30e07180
[2]: sysupgrade stricter check https://github.com/openwrt/openwrt/issues/20566#issuecomment-3583555482
[3]: ASU proposal https://github.com/openwrt/asu/pull/1533
[4]: allow easy sysupgrade proposal https://github.com/openwrt/openwrt/pull/20947
[5]: b71f4665cd
Fixes: b71f466 ("mediatek: filogic: fix supported_devices list for gl-mt2500")
Fixes: 8d30e07 ("mediatek: filogic: fix for new GL.iNet GL-MT2500/GL-MT2500A hardware revision")
Fixes: https://github.com/openwrt/openwrt/issues/20566
Fixes: https://github.com/openwrt/asu/issues/1525
Signed-off-by: Mario Andrés Pérez <mapb_@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21842
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 7aa1f7e814)
When config_change is set during an active setup (e.g. by a concurrent
reconf call), wdev_mark_up() attempted to call setup() while still in
"setup" state. Since setup() requires state "up" or "down", it silently
returned, leaving the state as "setup". The subsequent wdev_setup_cb()
then treated this as a setup failure, triggering an unnecessary
teardown+restart cycle.
Fix this by removing the config_change handling from wdev_mark_up() and
moving it to wdev_setup_cb() instead. wdev_mark_up() now always
transitions to "up" state. When wdev_setup_cb() runs afterwards and
finds the device already "up" with config_change set, it initiates a
clean re-setup from the "up" state where setup() can run.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 3553eda283)
- no longer write any temporary file for peer gen
- use wg syncconf to update active interfaces (not setconf)
Signed-off-by: Paul Donald <newtwen+github@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21784
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 148207730a)
Link: https://github.com/openwrt/openwrt/pull/21840
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The xrx200 ethernet driver falls back to a random MAC address on any
error from of_get_ethdev_address(), including -EPROBE_DEFER. When the
MAC address comes from an nvmem layout driver (such as u-boot-env on
NAND), the nvmem cell may not be available yet at first probe attempt.
Fix this by propagating EPROBE_DEFER so the driver probe is deferred
until the nvmem cell becomes available.
Tested on Zyxel P-2812HNU-F1 (NAND, u-boot-env nvmem layout).
Signed-off-by: Burak Aydos <byhexadecimal@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21861
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 50e7e5c80d)
Port 21 definition was missed during addition of LGS328C.
Add it to the dts.
Fixes: 853d73f ("realtek: add support for Linksys LGS328C")
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21793
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 75fd2497ac)
Link: https://github.com/openwrt/openwrt/pull/21900
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Commit 78bf3a5f44 ("realtek: dsa: Fix rate control initialization") enabled
code setting up the "storm control" feature. This casued a speed regression
on rtl838x, reducing the effective max speed per port from line rate to around
500 Mbits/s.
Storm control is a policy feature with a number of input parameters depending
on use case and environment. It is not possible to define a meaningful static
policy in the driver. The problem isn't just the arbitrary limits in the
current code. Such features require userspace interfaces.
Drop this code for now. It wasn't missed while it was disabled.
Fixes: 78bf3a5f44 ("realtek: dsa: Fix rate control initialization")
Link: https://github.com/openwrt/openwrt/issues/21692
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Link: https://github.com/openwrt/openwrt/pull/21877
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 3972aeaf7c)
Link: https://github.com/openwrt/openwrt/pull/21900
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Setup for DSA QOS on RTL839x accesses unitialized memory. For some
reason the handover of the priv structure was realized via global
intermediate variable switch_priv. During refactoring for adbb9a6
("realtek: dsa: rtl83xx: fix init section mismatch") this was not
noticed. Since then RTL839x devices crash during startup.
Fix this by using standard handover via function parameters.
Fixes: e81affb9 ("realtek: dsa: rtl83xx: fix init section mismatch")
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21703
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit ac96463944)
Link: https://github.com/openwrt/openwrt/pull/21900
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Compilation currently spits this message:
WARNING: modpost: vmlinux: section mismatch in reference:
rtl83xx_sw_probe+0x6a4 (section: .text.rtl83xx_sw_probe)
-> rtl83xx_setup_qos (section: .init.text)
That means that we have a "normal" function caller (can be
called during the whole uptime) and a "initialization" function
callee (only available during init.
Fix this and directly fix the unwanted family checks.
Fixes: 012e0091 ("realtek: dsa: avoid use-after-free")
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21690
(cherry picked from commit adbb9a6423)
Link: https://github.com/openwrt/openwrt/pull/21900
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The realtek target uses some functions marked __init for initialization.
However, that means they can only be called once when compiled in and
afterwards the memory occupied by them is freed and potentially reused.
Some "impossible" (code at a given location can't crash in the way it
does) crashes can be caused by this because upon re-execution of those
functions, garbage gets executed. Such re-execution can happen for
deferred probes or repeated probes.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Link: https://github.com/openwrt/openwrt/pull/21504
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
(cherry picked from commit a91c3abe83)
Link: https://github.com/openwrt/openwrt/pull/21900
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Commit 01a87f4bd0 changed the encryption
setting of the default SSID "OpenWrt" from "none" to "open". The correct
setting as per the documentation [1] is "none", though.
While this invalid setting won't cause a wrong hostapd setup, it will
at least cause malfunction in LuCI.
Change the default encryption setting back to "none".
[1] https://openwrt.org/docs/guide-user/network/wifi/basic#encryption_modes
Fixes: 01a87f4bd0
Signed-off-by: Shine <4c.fce2@proton.me>
Link: https://github.com/openwrt/openwrt/pull/21925
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 4ab5fcc04f)
This commit fixes non-working USB port:
---
[ 5.294036] xhci-mtk 11200000.usb: error -EPERM: Failed to get supply 'vbus'
[ 5.301163] xhci-mtk 11200000.usb: error -EPERM: Failed to get regulators
[ 5.307938] xhci-mtk 11200000.usb: probe with driver xhci-mtk failed with error -1
---
While testing the USB power on/off functionality during the previous
commit, I didn't sufficiently test the actual operation of the USB
devices.
Fixes: ff5e66a920 ("mediatek: add support for Routerich BE7200")
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21795
(cherry picked from commit 2651a6ced9)
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21882
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The pattern '*-*cc-*' incorrectly matches these tools because their names
contain 'cc-'. This causes them to receive compiler CFLAGS, breaking
builds with 'ar: two different operation options specified'.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
Link: https://github.com/openwrt/openwrt/pull/21757
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 435917735a)
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
Link: https://github.com/openwrt/openwrt/pull/21899
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit adds support for the Cudy AP3000 Wall v1.
SoC: MediaTek MT7981b
RAM: 256MiB
Flash: spi-nand spi0.0: 128 MiB
Wifi: MediaTek MT7981 2x2 DBDC 802.11ax 2T2R (2.4 / 5)
LEDs: 1 LED in two colors (red & white)
Buttons: 1 reset, 1 led on/off
Ethernet: 5x 1GbE
Power: PoE powered (standalone)
The stock firmware is a customized variant of OpenWrt, which implements
a signature check that only allows flashing official firmware. Cudy offers
intermediate OpenWrt firmware images on their website [1][2] which do not
implement the signature check. After flashing the intermediate image the
upstream official OpenWrt image can be installed.
The stock firmware can be recovered via TFTP using the U-Boot based boot
loader[3]. Set up a TFTP server on your computer with IP 192.168.1.88/24
serving the stock firmware from Cudy's website renamed to "recovery.bin".
Press and hold the reset button while powering on the device, wait for the
TFTP server to send the recovery.bin file, then release the reset button.
The router will take a couple of minutes to reboot and set up the stock
firmware.
[1] https://www.cudy.com/blogs/faq/openwrt-software-download
[2] https://drive.google.com/drive/folders/1BKVarlwlNxf7uJUtRhuMGUqeCa5KpMnj
[3] https://www.cudy.com/en-us/blogs/faq/how-to-recovery-the-cudy-router-from-openwrt-firmware-to-cudy-official-firmware
Signed-off-by: Derek Denk <derek.denk@live.com>
Link: https://github.com/openwrt/openwrt/pull/21266
(cherry picked from commit afad4c71f8)
Link: https://github.com/openwrt/openwrt/pull/21890
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The MT7531 has an incorrect interrupt number described in the DTS.
This commit also adds PHY interrupts. They work the same as on
the MT7988.
Tested on Gemtek W1700k.
Suggested-by: Benjamin Larsson <benjamin.larsson@genexis.eu>
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://github.com/openwrt/openwrt/pull/21016
(cherry picked from commit 788958880b)
Link: https://github.com/openwrt/openwrt/pull/21838
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Uninitialized memory led to bogus, huge timestamps being set on files
downloaded with the wget backend. This caused odd issues like 'ls -l'
crashing busybox when attempting to list the .apk file afterwards.
Link: 42f159e67b
Signed-off-by: Matt Merhar <mattmerhar@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/21874
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit f750e3096f)
Bc-bocun Chen of MediaTek has discovered a memory leak in the error path
in our downstream patch for mtk_eth_soc which adds support for the 10G
PCS and PHY paths of the MT7988 SoC.
Fix this by freeing the at this point already allocated netdev resources
before returning the error.
Fixes: 4cb6bd9a6d ("mediatek: switch to pending XFI 10G Ethernet drivers")
Reported-by: Bc-bocun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 4d71c767c4)
The D-Link DIR-1360 A1 is an AC1300 router based on the MT7621AT SoC.
Specifications :-
* SoC: MediaTek MT7621AT
* RAM: 256 MB DDR3
* Flash: 128 MB SPI NAND (Winbond W29N01HV)
* WiFi: MT7615D (2.4 GHz + 5 GHz DBDC)
* Ethernet: 5x 10/100/1000 Mbps (1x WAN, 4x LAN)
* USB: 1x USB 3.0
* Buttons: Reset, WPS
* LEDs: Power (White/Orange), Internet (White/Orange), USB, 2.4G/5G WLAN
MAC addresses are retrieved from the 'factory' partition via NVMEM.
LAN: 0xe000 (gmac0)
WAN: 0xe006 (gmac1)
WLAN: 0xe00c (pcie0)
Flash Instruction :-
1-Set a static IP on your PC (e.g., 192.168.0.10, Gateway 192.168.0.1).
2- Power off the router and connect your PC to a LAN port.
3- Hold the Reset button and power on the router; continue holding for 5 seconds.
4- Access the Recovery UI at http://192.168.0.1 in your browser.
5- Upload the OpenWrt factory.bin image and wait for the reboot.
With these definitions in place, the DIR-1360 A1 boots reliably, exposes all hardware features correctly, and can be flashed via both the OEM recovery interface and standard OpenWrt upgrade paths.
Signed-off-by: Aryaman Srivastava <aryamansrivastava895@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21616
(cherry picked from commit 7a8e2efed5)
Link: https://github.com/openwrt/openwrt/pull/21826
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Part of the phy patch process breaks functionality on non-Realtek
platforms. Only apply this on Realtek SoCs to fix functionality
everywhere else.
Signed-off-by: Andrew LaMarche <andrewjlamarche@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21777
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 268a0cb363)
Link: https://github.com/openwrt/openwrt/pull/21799
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
