The Plasma Cloud PSX28 and ESX28 are using RTL8224 as ethernet PHY. This
phy works perfectly fine on PSX8/PSX10 (RTL930x) but failed to establish a link
on rtl931x because the upstream realtek phy driver was not enabled.
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20239
Signed-off-by: Robert Marko <robimarko@gmail.com>
The u-boot of cmcc_rax3000m_*-ddr3 declares a dependency on
trusted-firmware-a-mt7981-*-ddr3-1866mhz, while actually packages
the normal BL2. This causes build failure if the the non-1866m
variant isn't built.
According to the previous commit, it's intended to use the lower
frequency variant to fix device stability issues. Correct
BL2_DDRTYPE as intended.
Fixes: 028050da69 ("mediatek: CMCC RAX3000Me: fix stability issues")
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
APK kindly stores the mtime of each containing file in created packages,
breaking reproducibility. As a fix, touch all files of the package with the
timestamp of PKGSOURCE_DATE_EPOCH, which contains the timestamp based on the
last package modification.
Over at OPKG, something similar is done by setting mtime in the tar command,
see the `ipkg-build` script.
To tackle this in APK directly, some changes are suggested. However until this
is merged, we should fix it downstream.
https://gitlab.alpinelinux.org/alpine/apk-tools/-/merge_requests/348
Signed-off-by: Paul Spooren <mail@aparcar.org>
Deprecated. Replaced with nvmem.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20176
Signed-off-by: Robert Marko <robimarko@gmail.com>
Userspace handling is deprecated.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20176
Signed-off-by: Robert Marko <robimarko@gmail.com>
Userspace handling is deprecated.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20176
Signed-off-by: Robert Marko <robimarko@gmail.com>
Userspace handling is deprecated.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20176
Signed-off-by: Robert Marko <robimarko@gmail.com>
Upstream will get support for the Realtek ECC engine with 6.18.
To make use of this in Openwrt
- backport upstream patches
- change config so that ECC will be built for nand subtargets
- define ECC engine in RTL93xx DTS.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/19746
Signed-off-by: Robert Marko <robimarko@gmail.com>
During testing, we discovered that when adding a new offload FDB rule
on certain VLANs and then delete it, does not work as expected.
Steps to Reproduce:
* Create VLAN 4094 on the port lan1:
bridge vlan add vid 4094 dev lan1 pvid
* Add a new FDB entry on port lan1 for VLAN 4094:
bridge fdb add 00:01:02:22:33:44 dev lan1 vlan 4094 master permanent
* Delete the new FDB entry on port lan1 for VLAN4094
bridge fdb del 00:01:02:22:33:44 dev lan1 vlan 4094 master permanent
Root Cause:
The failure occurs because the hash_msb flag is not set correctly
based on the VLAN ID when adding a new L2 entry.
Signed-off-by: Issam Hamdi <ih@simonwunderlich.de>
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20183
Signed-off-by: Robert Marko <robimarko@gmail.com>
Align GS1900-10HP dts with other realtek devices to reduce the risk of device
specific regressions with the upcoming driver cleanup/rewrite.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Link: https://github.com/openwrt/openwrt/pull/20228
Signed-off-by: Robert Marko <robimarko@gmail.com>
Parse the pcs-handle property regardless of phy-handle
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Link: https://github.com/openwrt/openwrt/pull/20228
Signed-off-by: Robert Marko <robimarko@gmail.com>
Check if the uploaded image matches the version of RouterBOOT before
proceeding with sysupgrade on MikroTik devices with NOR flash.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
RouterBOOT v7 for NOR devices does not support the historic yaffs
"kernel" ELF boot method.
Generate a compatible kernel
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
RouterBOOT v7 for NOR devices does not support the historic yaffs
"kernel" ELF boot method.
Generate a compatible kernel
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
RouterBOOT v7 for NOR devices does not support the historic yaffs
"kernel" ELF boot method.
Generate a compatible kernel
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Adjust the YAFFS file path written depending on the sysupgrade
filename.
Default to kernel (for ELF), switch to bootimage (for NPK) if image name
has v7.
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Add build step 'kernel-pack-npk' which uses 'npk_pack_kernel' which is now
part of firmware-utils to enable wrapping the kernel inside a MikroTik NPK
package.
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
7e6f69b npk_pack_kernel: add tool for creating MikroTik NPK kernel packages
d3f8b6e zynsig: add new tool for creating images for the ZyXEL GS1920 series
9fa340d ptgen: create separate images for gpt data structure
78d8084 ptgen: allow image generation for a specified disk size
3f2d148 ptgen: allow non-default placement of gpt entry table
f1f98b0 ptgen: do not create stub partition to fill a gap if gap caused by alignment
6ea8b6d ptgen: fix protective MBR partition size
febfef7 ptgen: use long long instead of long for sizes
996dc48 ptgen: fix misprint and simplify calculation a bit
0725c3d build: require CMake >= 3.5 due to dropped legacy support
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Fix a typo on defining the PHY package kmod description that reference
phy-aeonsemi-as21x1x package instead of phy-aeonsemi-as21xxx.
Fixes: 08a616b216 ("generic: backport support for Aeonsemi AS21xxx PHY")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Since we are not using patch -b, *.orig files are only created when
there are conflicts, or never according to posix patch.
As such, it doesn't really make sense to always delete *.orig files
presuming they are patch backups, even if they are patch backups.
Doing so is both deleting potentially useful information for failed
patch applications and creating hard to diagnose bugs [1].
In a similar vein, checking for *.rej files does not add any value
since we're already checking the patch command's return code.
[1]: https://github.com/openwrt/packages/issues/27485
Signed-off-by: George Tsiamasiotis <george@tsiamasiotis.gr>
Link: https://github.com/openwrt/openwrt/pull/20141
Signed-off-by: Robert Marko <robimarko@gmail.com>
Do not allow hostapd phy state update to bring up links as long between mld_set
and mld_start calls. Configuration on other PHYs could still be pending.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Bring up AP interfaces, even if no frequency update was provided.
Fixes bringup when a MLO STA on the same radios connects to fewer links
than available, or to a non-MLD AP.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add missing syscon compatible for scuclk node.
Fix the unit-address of the scuclk node.
This fixes the pcs driver error:
airoha-pcs 1fa08000.pcs: probe with driver airoha-pcs failed with error -22
airoha-pcs 1fa09000.pcs: probe with driver airoha-pcs failed with error -22
Fixes: c3d70b1 ("airoha: en7581: Add support for external PHY")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/20190
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
The pinctrl driver for airoha was expecting a function name that was
not a string, but was passed one. Removing #string fixed this issue.
Fixes: c5b12fc ("airoha: Introduce support for Airoha AN7583 SoC")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/20190
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This patch already exists in generic/backport-6.12.
Fixes: 122135b ("airoha: an7581: add support for kernel 6.12")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/20190
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
All devices under airoha use dts directory under the target,
so update the default DEVICE_DTS_DIR. Also set the default
DEVICE_DTS based on the SoC name for non-dev boards.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/20190
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add support for swapping the Serdes TX line on RTL8261N PHYs.
This is used on an Arcadyan Mozart board where the Serdes TX is swapped
on the PHY (instead of on the Soc) to permit support of SFP module by
using toggling the integrated MUX.
Link: https://github.com/openwrt/openwrt/pull/20227
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Make the package empty if ucode wifi scripts are being used (since iwinfo is
provided by wifi-scripts in that case). This fixes packages that explicitly
select iwinfo
Signed-off-by: Felix Fietkau <nbd@nbd.name>
There are no supported drivers where it even makes sense to disable WMM
anymore, since so much depends on it.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Do not always try to include iwinfo in the images when wpa supplicant or
Broadcom nas is also included. iwinfo is incompatible with current
default configuration.
iwinfo is only build when CONFIG_WIFI_SCRIPTS_UCODE is not set. If
CONFIG_WIFI_SCRIPTS_UCODE is not set kmod-cfg80211 depends on iwinfo,
so it should be included in all images with wifi drivers.
The CONFIG_WIFI_SCRIPTS_UCODE option was recently changed to be active
by default.
This should fix the current buildbot build failures.
This reverts commit 6435b8bb27 ("build: include iwinfo by default
if nas or wpad(-mini) is selected")
Fixes: 04e9929c47 ("wifi-scripts: enable ucode scripts by default")
Link: https://github.com/openwrt/openwrt/pull/20211
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Update with make kernel_oldconfig CONFIG_TARGET=target. Also disable
CONFIG_POSIX_MQUEUE, as it's available in the OpenWrt configuration.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
This is an automatically generated commit which aids following Kernel patch
history, as git will see the move and copy as a rename thus defeating the
purpose.
For the original discussion see:
https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
This is an automatically generated commit.
When doing `git bisect`, consider `git bisect --skip`.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
