3d953628bf17 udebugd: add support for setting an override config
93f6df0240e5 udebug-cli: add support for overriding config on the command line
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit c4e7b9b9b7)
The vendor DTS defined incorrect GPIOs for the LEDs, which caused them
to not function properly. Initially, the WAN, WLAN LEDs appeared to
work, but further testing showed that they were non-functional.
This patch corrects the GPIO assignments in the DTS, restoring full LED
functionality including blinking, except the power LED which cannot be
software controlled.
Tested on a CF-EW71 v2 unit.
Fixes: ee3a6adc6c ("ath79: add support for Comfast CF-EW71 v2")
Signed-off-by: Felix Golatofski <git@xdfr.de>
Link: https://github.com/openwrt/openwrt/pull/19665
(cherry picked from commit 9ce23ac840)
Link: https://github.com/openwrt/openwrt/pull/19839
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This enables software that requires this cipher suite (e.g. OpenThread Border
Router) to be compiled against the shared library rather than a separate copy.
Signed-off-by: Karsten Sperling <ksperling@apple.com>
Link: https://github.com/openwrt/openwrt/pull/19489
(cherry picked from commit 97dc9f8dbf)
Link: https://github.com/openwrt/openwrt/pull/19839
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
There is some confusion in the Git log of this file. Specifically,
the commit message on 7b7f1702 incorrectly indicates that there was
"potential fear" about copyright infringement.
Upon review of this situation, there is, in my opinion, no concern of
copyright infringement here. This is not legal advice; it is my
opinion based of years of work on copyright policy for FOSS.
However, Elliott Mitchell's idea was obviously helpful as inspiration
in writing this script and deserves credit. Ideas alone, however,
are not to my knowledge copyrightable anywhere in the world.
Signed-off-by: Bradley M. Kuhn <bkuhn@sfconservancy.org>
(cherry picked from commit d8e738e5c4)
Link: https://github.com/openwrt/openwrt/pull/19839
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The interrupt handler reads from the mailbox if no other reason for the
interrupt is known. If a spurious interrupt is received just after a
mailbox message has been sent, this means that the response to the
previous message is read again and returned by DSL_BSP_SendCMV instead
of the actual response.
To fix this, check the status register before reading from the mailbox
in the interrupt handler.
Tested on Fritzbox 7320. Without this change, there is occasionally a
kernel panic due to an out-of-bounds memory access in the ltq-adsl
driver (in DSL_DRV_DEV_G997_SnrAllocationNscGet), as a result of an
incorrect value returned by DSL_DRV_DANUBE_CmvRead. This is reproducible
by calling "dsl_cpe_pipe.sh g997dsnrg 1 1" multiple times.
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Link: https://github.com/openwrt/openwrt/pull/19385
(cherry picked from commit 6889ea7b9a)
Link: https://github.com/openwrt/openwrt/pull/19839
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The IPQ4019 datasheet indicates that the maximum supported SPI
frequency is 25 MHz. My experiment on SKSpruce WIA3300-20 shows
that exceeding this threshold can lead to instability of SPI
peripheral. Limit the SPI clock frequency to the QSDK recommended
value 24MHz to enhance stability.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/19744
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 3ff8a3dca8)
Link: https://github.com/openwrt/openwrt/pull/19796
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
PR of openwrt:main: https://github.com/openwrt/openwrt/pull/19512
OpenFi 6C is a portable Wi-Fi 6 travel router based on MediaTek MT7981B+MT7976CN.
Two slightly different versions have been sold. The V1 board has a green color and lacks the modem LED. The V2 board is black and has a LED for the modem.
Specifications:
- SoC: MediaTek MT7981B (Filogic 820) 1.3GHz dual-core ARM Cortex-A53
- RAM: 1GB DDR4
- Flash: 256MB SPI NAND
- Wireless: 2.4GHz/5GHz 802.11ax
- Ethernet: 1x 10/100/1000M LAN
- USB: 1x USB 3.0 Type-A port
- Expansion: M.2 slot for 5G modem
- Cooling: PWM-controlled fan
- Buttons: Reset, Mode switch
- LEDs: System, Ethernet, 5G WiFi, Modem status
**Installation via U-Boot web page**
1. Set static IP 192.168.21.2/255.255.255.0 on your computer.
2. Connect to the Ethernet port and hold the reset button while booting the device. Wait for 6-8 seconds, and release the reset button.
3. Open U-boot web page on your browser at http://192.168.21.1
4. Select the OpenWRT sysupgrade image, upload it, and start the upgrade.
5. Wait for automatic reboot.
**Installation via sysupgrade**
Flash the sysupgrade file via LuCI upgrade page without saving the settings.
Signed-off-by: Jiasheng Zhu <newbanyaya@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19512
(cherry picked from commit 536a25ebf8)
Link: https://github.com/openwrt/openwrt/pull/19536
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Currently, if OEM recovery flashes OpenWrt to second ubi1,
OpenWrt cannot boot. With this commit, recovery image is built
with initramfs kernel, so that it can boot from either ubi or ubi1.
This adds an extra step to OpenWrt installation from OEM:
user needs to sysupgrade from initramfs to full system.
Signed-off-by: Mateusz Krzak <kszaquitto+github@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18878
(cherry picked from commit 6615c8cfc8)
Signed-off-by: Mateusz Krzak <kszaquitto+github@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19595
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This is an industrial 4G router equipped with OpenWrt SNAPSHOT OEM
customized version
WARNING: The original firmware device tree is modified from evb
boards, and the device tree name is evb board. This submitted device
tree is a modified version, which deletes the non-this-device parts
and adds GPIO watchdog.
Specification:
- SoC: MediaTek MT7628NN
- Flash: 16 MB
- RAM: 128 MB
- Power: DC 5V-36V 1.5A
- Ethernet: 1x WAN [slot not install], 1x LAN (10/100 Mbps)
- Wireless radio: 802.11n 2.4g-only [antenna not install]
- LED:
System/Power (RUN): GPIO/37 active-low
Modem: GPIO/3 active-low
RF (Modem Signal): GPIO/2 active-low
- Button:
WPS / RESET: GPIO/11 active-low
- UART: 1x UART on PCB - 115200 8N1
- Serial / COM: 1X RS232/RS485 on board (GPIO/6 hi:RS485 lo:RS232)
- GPIO Watchdog: GPIO/0 mode=toggle timeout=1s
- Modem: 1x Built-in modem on board (Power: GPIO/4 active-high)
- PCIe: 1x miniPCIe for modem [slot not install]
- SIM Slots: 1x SIM Slots
Issue:
- Factory partition not store mac address on original firmware
Flash instruction:
Using SSH/Telnet:
1. Connect the board to the computer via RJ45 Ethernet
2. Login 192.168.8.1 with root password "superzxmn" (SSH Port 22, Telnet Port 5188)
3. Download openwrt firmware on the computer.
4. Use scp or sftp put firmware to board /tmp
5. Use command "mtd -r write openwrt-ramips-mt76x8-hongdian_h7920-v40-squashfs-sysupgrade.bin firmware"
to flash
Original Firmware Dump / More details:
https://blog.gov.cooking/archives/research-hongdian-h7920-v40-and-flash.html
Signed-off-by: Coia Prant <coiaprant@gmail.com>
Tested-by: Coia Prant <coiaprant@gmail.com>
(cherry picked from commit ebee946227)
Link: https://github.com/openwrt/openwrt/pull/19716
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Backport some flow offload helper patch in preparation for Airoha Flow
Offload support.
Link: https://github.com/openwrt/openwrt/pull/18166
(cherry picked from commit 34ba7e8a8a)
[ drop merged patch 705-v6.12-netdevice-add-netdev... ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Backpot upstream patch for Flow Offload support for AN7581 and refresh
all affected patch. To correctly work a dedicated firmware is needed to
use the dedicated Network Coprocessor (NPU).
This also introduce good cleanup and moves the driver in a dedicated
Airoha directory. While currently not totally usable (due to lack of
firmware blob) this is needed to backport support for external PHY/SFP
support.
Refresh all affected patch.
Tested-by: Aleksander Jan Bajkowski <olek2@wp.pl> # tested on Quantum W1700k
Tested-by: Andrew LaMarche <andrewjlamarche@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18166
(cherry picked from commit ad2077165b)
[ refresh patches ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Backport some upstream patch for Airoha ethernet driver in preparation
for Flow Offload support.
Tested-by: Aleksander Jan Bajkowski <olek2@wp.pl> # tested on Quantum W1700k
Tested-by: Andrew LaMarche <andrewjlamarche@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18166
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit afea8bda0d)
Replace PCIe patch with upstream version and update DTS with new PBUS
CSR property now required.
Tested-by: Aleksander Jan Bajkowski <olek2@wp.pl> # tested on Quantum W1700k
Tested-by: Andrew LaMarche <andrewjlamarche@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18166
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 921d438564)
Removes the need for a remove function in platform_device.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18660
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit aa4c96b925)
Drop Airoha MTD parser patch as a better solution was agreed with a
fixed partition table.
Tested-by: Aleksander Jan Bajkowski <olek2@wp.pl> # tested on Quantum W1700k
Link: https://github.com/openwrt/openwrt/pull/18112
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 90dee1ab30)
This got added in commit 15887235, cherry-picked into the 24.10 branch
as 642b5b61 and was partially lost in a manual patch refresh in
3a2a2c99.
The main branch still contains the full set of rx DMA size changes, so I
assume it was lost by accident.
With rx.dma_size=2K, my TP-Link Archer MR600v2 (MT7621) randomly reboots
due to OOM.
Signed-off-by: Stefan Dösinger <stefandoesinger@gmail.com>
In the conversion to dts, qca,led-pin was used for both interfaces.
Unfortunately, it's mutually exclusive with gpio-controller which made
it not do anything.
Fixes: 949e1a0 ("mpc85xx: tl-wdr4900: move platform code to dts")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19758
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit cc0ff28f23)
The bootup of the armsr target sometimes failed like this:
```
[ 0.762283] NET: Registered PF_INET6 protocol family
[ 0.791987] workqueue: Failed to create a worker thread: -EAGAIN
[ 0.801986] workqueue: Failed to create a rescuer kthread for wq "mld": -EAGAIN
[ 0.964017] NET: Unregistered PF_INET6 protocol family
```
Increase the maximum number of threads the kernel allows.
Link: https://github.com/openwrt/openwrt/pull/19376
(cherry picked from commit c5330bdf7e)
Link: https://github.com/openwrt/openwrt/pull/19554
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
f510d75ff7 nscd: Use time_t for return type of addgetnetgrentX
5aa4bb67b9 resolv: Fix some unaligned accesses in resolver [BZ #30750]
249646f12b Force DT_RPATH for --enable-hardcoded-path-in-tests
697ab62d11 i386: Disable Intel Xeon Phi tests for GCC 15 and above (BZ 31782)
c8cb4d2b86 misc: Add support for Linux uio.h RWF_NOAPPEND flag
712453634c s390x: Fix segfault in wcsncmp [BZ #31934]
7bfc35959d nptl: fix potential merge of __rseq_* relro symbols
d9d019d674 elf: Make dl-rseq-symbols Linux only
bb30bd2162 Linux: Make __rseq_size useful for feature detection (bug 31965)
dc512364e8 resolv: Allow short error responses to match any query (bug 31890)
6cad0f543c resolv: Do not wait for non-existing second DNS response after error (bug 30081)
1bed6acf50 resolv: Track single-request fallback via _res._flags (bug 31476)
0301637b99 linux: Update the mremap C implementation [BZ #31968]
f0e2114535 mremap: Update manual entry
6bb75212e6 Add mremap tests
3ac7ba61d2 Update syscall lists for Linux 6.5
9184c13681 resolv: Fix tst-resolv-short-response for older GCC (bug 32042)
059f82c3b9 Fix name space violation in fortify wrappers (bug 32052)
c005d1bd6f x86: Fix bug in strchrnul-evex512 [BZ #32078]
28f358bc42 support: Add FAIL test failure helper
99ffa84bdc stdio-common: Add test for vfscanf with matches longer than INT_MAX [BZ #27650]
87a1968a72 Make tst-ungetc use libsupport
804d3c8db7 ungetc: Fix uninitialized read when putting into unused streams [BZ #27821]
b9f72bd5de ungetc: Fix backup buffer leak on program exit [BZ #27821]
15ca66303f posix: Use <support/check.h> facilities in tst-truncate and tst-truncate64
f30501ca75 nptl: Use <support/check.h> facilities in tst-setuid3
370be85892 libio: Attempt wide backup free only for non-legacy code
4dd8641461 Add crt1-2.0.o for glibc 2.0 compatibility tests
fa4ad10406 elf: Change ldconfig auxcache magic number (bug 32231)
9423cc5387 nptl: initialize rseq area prior to registration
37ded328c4 nptl: initialize cpu_id_start prior to rseq registration
cf06772360 x86: Avoid integer truncation with large cache sizes (bug 32470)
5c9be512ee x86_64: Sort fpu/multiarch/Makefile
49016f2190 x86_64: Add log2 with FMA
b2a45f1eee x86_64: Add expm1 with FMA
c92946d9b2 x86_64: Add log1p with FMA
58822f954f x86: Check the lower byte of EAX of CPUID leaf 2 [BZ #30643]
7772f9358c elf: Fix slow tls access after dlopen [BZ #19924]
5a64f93365 x86: Only align destination to 1x VEC_SIZE in memset 4x loop
0d14bf0754 sysdeps/x86/Makefile: Split and sort tests
dc1762113d x86_64: Fix missing wcsncat function definition without multiarch (x86-64-v4)
04b8d48432 x86: Improve large memset perf with non-temporal stores [RHEL-29312]
12fec8aae5 x86/string: Fixup alignment of main loop in str{n}cmp-evex [BZ #32212]
48642ef1a5 elf: Avoid some free (NULL) calls in _dl_update_slotinfo
549e7f7c5a elf: Support recursive use of dynamic TLS in interposed malloc
c32fd59314 Fix underallocation of abort_msg_s struct (CVE-2025-0395)
650a0aaaff stdlib: Test using setenv with updated environ [BZ #32588]
f984e2d7e8 assert: Add test for CVE-2025-0395
9ca74b8ad1 AArch64: Improve generic strlen
95aa21432c AArch64: Optimize memset
5fe151d86a AArch64: Remove zva_128 from memset
3de5112326 math: Improve layout of expf data
52c2b1556f AArch64: Add SVE memset
097299ffa9 AArch64: Use prefer_sve_ifuncs for SVE memset
5a08d049dc math: Improve layout of exp/exp10 data
3be3728df2 elf: Ignore LD_LIBRARY_PATH and debug env var for setuid for static
454f24e981 support: Use const char * argument in support_capture_subprogram_self_sgid
4335cd9b58 support: Add support_record_failure_barrier
31fa0f73e2 elf: Test case for bug 32976 (CVE-2025-4802)
ca41fe44a5 x86_64: Fix typo in ifunc-impl-list.c.
ca7e32d024 elf: Fix subprocess status handling for tst-dlopen-sgid (bug 32987)
81f58dd9b7 support: Pick group in support_capture_subprogram_self_sgid if UID == 0
5a6276d97a Fix error reporting (false negatives) in SGID tests
1a0d73a625 pthreads NPTL: lost wakeup fix 2
b5c4727e59 nptl: Update comments and indentation for new condvar implementation
1fa5e51897 nptl: Remove unnecessary catch-all-wake in condvar group switch
44eaf0615d nptl: Remove unnecessary quadruple check in pthread_cond_wait
7625579f11 nptl: Remove g_refs from condition variables
6bac834c5a nptl: Use a single loop in pthread_cond_wait instaed of a nested loop
5765653697 nptl: Fix indentation
8899e89b29 nptl: rename __condvar_quiesce_and_switch_g1
39a80f4035 nptl: Use all of g1_start and g_signals
51210d6496 nptl: PTHREAD_COND_INITIALIZER compatibility with pre-2.41 versions (bug 32786)
879f0ee122 malloc: add indirection for malloc(-like) functions in tests [BZ #32366]
a637f2c42f malloc: obscure calloc use in tst-calloc
21019afe65 malloc: cleanup casts in tst-calloc
6a52d5cab0 posix: Fix double-free after allocation failure in regcomp (bug 33185)
Link: https://github.com/openwrt/openwrt/pull/19551
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
6953f19 wireless-regdb: Update regulatory info for Indonesia (ID) for 2025
2e8214e wireless-regdb: Permit 320 MHz bandwidth in 6 GHz band for GB
a94f685 wireless-regdb: Update regulatory info for Egypt (EG) for 2024
7628ce2 wireless-regdb: Update regulatory rules for Brazil (BR) on 6GHz
4411b39 wireless-regdb: Update regulatory info for Vietnam (VN) for 2025
490f136 wireless-regdb: Update regulatory info for Estonia (EE) for 2024
c56c663 wireless-regdb: update regulatory rules for Paraguay (PY) on 6 GHz for 2025
5a8ced5 wireless-regdb: Update regulatory info for CEPT countries for 6GHz listed by WiFi Alliance
5fd8ee3 wireless-regdb: update regulatory rules for Bosnia and Herzegovina (BA) for 6 GHz
e05260a wireless-regdb: update regulatory database based on preceding changes
Link: https://github.com/openwrt/openwrt/pull/19474
(cherry picked from commit 7fe06b7f56)
Link: https://github.com/openwrt/openwrt/pull/19538
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Currently the system boots up, but is unusable because pressing enter
does not provide login with error:
login: can't get SID for root
This is happenning, because login.c passes the Linux username directly
to get_default_context(), while libselinux expects an SELinux user
identity, causing the call to fail for users without a matching SELinux
name (e.g., root) and aborting login on SELinux-enabled systems.
Fixes: #19075
Upstream-Status: Submitted [https://lists.busybox.net/pipermail/busybox/2025-April/091407.html]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Link: https://github.com/openwrt/openwrt/pull/19080
(cherry picked from commit 5809bfaaac)
Link: https://github.com/openwrt/openwrt/pull/19542
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Correctly load the list of basic_rates from UCI. basic-rates shall be
stored as a option-list. The current code did not retrieve this list
correctly.
wpa_supplicant uses a different config option to set basic-rates
when operating in mesh-mode.
Use the correct config key and calculation for mesh-interfaces.
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit a854d833ea)
5d10084ea885 lib-ucode.c: add #define _GNU_SOURCE
a95364b41d52 udebug-cli: fix terminating uloop
c00eb9b685a8 ucode: use FILE handle for pcap output
4265167cb6e8 ucode: add error reporting to pcap_write
4a908ee731a6 udebug-cli: stop event loop on write failure
6e04f4187231 ucode: use ucv_resource_create_ex for remote rings
c297f04e1852 ucode: drop use ucv_resource_create
f207d37a1055 ucode: add support for specifying ring format
98683a94bcdd ucode: support appending array data, similar to socket.send()
a7ecd483ed38 ucode: allow calling udebug.init() multiple times
d4a4c788c416 ucode: fix allocation size of local ring meta
184706abaf50 ucode: add timestamp argument to foreach()
8442c948c193 ucode: add function for getting ring information
f4958a4c591a ucode: add const entries for enum udebug_format
14d4fec36993 udebug-cli: add logstream command
6ed8536142bb ucode: fix entries/size confusion
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 7b0ce213e9)
These instructions are for 64-bit load/store. On ARMv5TE, the CPU
requires addresses to be aligned to 64-bit. When misaligned, behavior is
undefined (effectively either loads the same word twice on LDRD, or
corrupts surrounding memory on STRD).
On ARMv6 and newer, unaligned access is safe.
Removing these instructions for ARMv5TE is necessary, because GCC
ignores alignment information in pointers and does unsafe optimizations
that have shown up as bugs in various places.
This patch was originally added more than 11 years ago in commit b050f87d13,
but got lost 6 years ago, when gcc 9.1 was added in 88c07c6552.
This primarily affects the kirkwood and ixp4xx targets
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit c1c1112006)
**Huasifei WH3000 Pro**
Portable Wi-Fi 6 travel router based on MediaTek MT7981A SoC. MT7981B+MT7976CN+RTL8221B Dual Core 1.3GHZ with 5G modems module and PWM Fan.
**Specifications**
SoC: Filogic 820 MT7981A (1.3GHz)
RAM: DDR4 1GB
Flash: eMMC 8GB
WiFi: 2.4GHz and 5GHz with 3 antennas
Ethernet:
1x WAN (10/100/1000M)
1x LAN (10/100/1000/2500M)
USB: 1x USB 3.0 port
Two buttons: power/reset and mode (BTN_0)
LEDS: blue, red, blue+red=pink
UART: 3.3V, TX, RX, GND / 115200 8N1
**Installation via U-Boot rescue**
1. Set static IP 192.168.1.2 on your computer and default route as 192.168.1.1
2. Connect to the WAN port and hold the reset button while booting the device.
3. Wait for the LED to blink 5 times, and release the reset button.
4. Open U-boot web page on your browser at http://192.168.1.1
5. Select the OpenWRT sysupgrade image, upload it, and start the upgrade.
6. Wait for the router to flash the new firmware.
7. Wait for the router to reboot itself.
**Installation via sysupgrade**
Just flash sysupgrade file via [LuCI upgrade page](http://192.168.1.1/cgi-bin/luci/admin/system/flash) without saving the settings.
**Installation via SSH**
Upload the file to the router `/tmp` directory, `ssh root@192.168.1.1` and issue a command:
```
sysupgrade -n /tmp/openwrt-mediatek-filogic-huasifei_wh3000-pro-squashfs-sysupgrade.bin
```
**Factory MAC**
You can find your Factory MAC which is mentioned on the box at `/dev/mmcblck0p2` partition `factory` starting from `0x4`
```
dd if=/dev/mmcblk0p2 bs=1 skip=4 count=6 | hexdump -C
```
Cherry-picked from 949d0bd77a
Fixed `green` to `blue` LED in dts, added `SUPPORTED_DEVICES += huasifei,fudy-pro` - to make sysupgrade compatible with factory QWRT/Lede fork firmware.
Signed-off-by: Fil Dunsky <filipp.dunsky@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19315
(cherry picked from commit db1de8d21f)
Link: https://github.com/openwrt/openwrt/pull/19391
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add uboot-envtools support for Gateworks venice boards based on i.MX8M
SoC's (imx_cortexa53) which boot from and store their U-Boot env on
eMMC boot0 hardware partition.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Link: https://github.com/openwrt/openwrt/pull/19347
(cherry picked from commit 29f7c0ef97)
Link: https://github.com/openwrt/openwrt/pull/19437
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
