mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2026-01-28 03:37:17 +01:00
ramips: add support for Hongdian H7920 v40
This is an industrial 4G router equipped with OpenWrt SNAPSHOT OEM customized version WARNING: The original firmware device tree is modified from evb boards, and the device tree name is evb board. This submitted device tree is a modified version, which deletes the non-this-device parts and adds GPIO watchdog. Specification: - SoC: MediaTek MT7628NN - Flash: 16 MB - RAM: 128 MB - Power: DC 5V-36V 1.5A - Ethernet: 1x WAN [slot not install], 1x LAN (10/100 Mbps) - Wireless radio: 802.11n 2.4g-only [antenna not install] - LED: System/Power (RUN): GPIO/37 active-low Modem: GPIO/3 active-low RF (Modem Signal): GPIO/2 active-low - Button: WPS / RESET: GPIO/11 active-low - UART: 1x UART on PCB - 115200 8N1 - Serial / COM: 1X RS232/RS485 on board (GPIO/6 hi:RS485 lo:RS232) - GPIO Watchdog: GPIO/0 mode=toggle timeout=1s - Modem: 1x Built-in modem on board (Power: GPIO/4 active-high) - PCIe: 1x miniPCIe for modem [slot not install] - SIM Slots: 1x SIM Slots Issue: - Factory partition not store mac address on original firmware Flash instruction: Using SSH/Telnet: 1. Connect the board to the computer via RJ45 Ethernet 2. Login 192.168.8.1 with root password "superzxmn" (SSH Port 22, Telnet Port 5188) 3. Download openwrt firmware on the computer. 4. Use scp or sftp put firmware to board /tmp 5. Use command "mtd -r write openwrt-ramips-mt76x8-hongdian_h7920-v40-squashfs-sysupgrade.bin firmware" to flash Original Firmware Dump / More details: https://blog.gov.cooking/archives/research-hongdian-h7920-v40-and-flash.html Signed-off-by: Coia Prant <coiaprant@gmail.com> Tested-by: Coia Prant <coiaprant@gmail.com> Link: https://github.com/openwrt/openwrt/pull/17726 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
Coia Prant
Hauke Mehrtens
parent
2fea2ede63
commit
ebee946227
4 changed files with 186 additions and 0 deletions
171
target/linux/ramips/dts/mt7628an_hongdian_h7920-v40.dts
Normal file
171
target/linux/ramips/dts/mt7628an_hongdian_h7920-v40.dts
Normal file
|
|
@ -0,0 +1,171 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "mt7628an.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
compatible = "hongdian,h7920-v40", "mediatek,mt7628an-soc";
|
||||
model = "Hongdian H7920 v40";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_sys;
|
||||
led-failsafe = &led_sys;
|
||||
led-running = &led_sys;
|
||||
led-upgrade = &led_sys;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-rf {
|
||||
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = "rf";
|
||||
};
|
||||
|
||||
led-net {
|
||||
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_MOBILE;
|
||||
};
|
||||
|
||||
led_sys: led-sys {
|
||||
gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_POWER;
|
||||
default-state = "on";
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
};
|
||||
|
||||
watchdog {
|
||||
compatible = "linux,wdt-gpio";
|
||||
|
||||
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
|
||||
hw_algo = "toggle";
|
||||
hw_margin_ms = <600>;
|
||||
always-running;
|
||||
};
|
||||
|
||||
gpio-export {
|
||||
compatible = "gpio-export";
|
||||
|
||||
gpio_modem_power {
|
||||
gpio-export,name = "modem_power";
|
||||
gpio-export,output = <0>;
|
||||
gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
gpio_serial_rs485_mode {
|
||||
gpio-export,name = "serial_rs485_mode";
|
||||
gpio-export,output = <0>;
|
||||
gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <40000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
eeprom_factory_0: eeprom@0 {
|
||||
reg = <0x0 0x400>;
|
||||
};
|
||||
|
||||
macaddr_factory_28: macaddr@28 {
|
||||
reg = <0x28 0x6>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x50000 0xfb0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio {
|
||||
groups = "i2s", "gpio", "refclk";
|
||||
function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
ðernet {
|
||||
nvmem-cells = <&macaddr_factory_28>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&esw {
|
||||
mediatek,portmap = <0x3e>;
|
||||
mediatek,portdisable = <0x3c>;
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
|
||||
nvmem-cells = <&eeprom_factory_0>;
|
||||
nvmem-cell-names = "eeprom";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -339,6 +339,15 @@ define Device/hiwifi_hc5861b
|
|||
endef
|
||||
TARGET_DEVICES += hiwifi_hc5861b
|
||||
|
||||
define Device/hongdian_h7920-v40
|
||||
IMAGE_SIZE := 16064k
|
||||
DEVICE_VENDOR := Hongdian
|
||||
DEVICE_MODEL := H7920
|
||||
DEVICE_VARIANT := v40
|
||||
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
|
||||
endef
|
||||
TARGET_DEVICES += hongdian_h7920-v40
|
||||
|
||||
define Device/iptime_a3
|
||||
IMAGE_SIZE := 7936k
|
||||
UIMAGE_NAME := a3
|
||||
|
|
|
|||
|
|
@ -109,6 +109,7 @@ ramips_setup_interfaces()
|
|||
;;
|
||||
duzun,dm06|\
|
||||
glinet,gl-mt300n-v2|\
|
||||
hongdian,h7920-v40|\
|
||||
teltonika,rut200|\
|
||||
teltonika,rut241)
|
||||
ucidef_add_switch "switch0" \
|
||||
|
|
@ -299,6 +300,7 @@ ramips_setup_macs()
|
|||
totolink,a3)
|
||||
wan_mac=$(mtd_get_mac_binary u-boot 0x1fc40)
|
||||
;;
|
||||
hongdian,h7920-v40|\
|
||||
jotale,js76x8-8m|\
|
||||
jotale,js76x8-16m|\
|
||||
jotale,js76x8-32m|\
|
||||
|
|
|
|||
|
|
@ -9,6 +9,10 @@ board_config_update
|
|||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
hongdian,h7920-v40)
|
||||
ucidef_add_gpio_switch "modem_enable" "Modem power" "modem_power" "1"
|
||||
ucidef_add_gpio_switch "switch_serial_mode" "Switch RS232 to RS485" "serial_rs485_mode" "0"
|
||||
;;
|
||||
teltonika,rut200|\
|
||||
teltonika,rut241)
|
||||
ucidef_add_gpio_switch "digital_output" "Digital output" "digital_output" "0"
|
||||
|
|
|
|||
Loading…
Add table
Reference in a new issue