e51d568 wireless-regdb: update regulatory rules for Botswana (BW) for 2022
5afc632 wireless-regdb: update regulatory rules for Sint Marteen (SX) for 2018
b484a31 wireless-regdb: Update regulatory info including bandwidth for Costa Rica (CR) for 2023
39e5e04 wireless-regdb: Permit lower 6 GHz band for Kazakhstan (KZ)
a827d3a wireless-regdb: update regulatory database based on preceding changes
Link: https://github.com/openwrt/openwrt/pull/20544
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This version fixes multiple security problems:
CVE-2025-7395: Problem in certificate verification on Apple devices
CVE-2025-7394: Predictable results from RAND_bytes() after fork call in OpenSSL compatibility layer
CVE-2025-7396: Activate Curve25519 blinding support
See Release notes:
https://github.com/wolfSSL/wolfssl/releases/tag/v5.8.0-stablehttps://github.com/wolfSSL/wolfssl/releases/tag/v5.8.2-stable
wolfSSL is now GPLv3 instead of GPLv2, see:
629c5b4cf6
The file size increased a bit:
```
546060 bin/packages/mipsel_24kc/base/libwolfssl5.7.6.e624513f-5.7.6-r1.apk
560684 bin/packages/mipsel_24kc/base/libwolfssl5.8.2.e624513f-5.8.2-r1.apk
```
Link: https://github.com/openwrt/openwrt/pull/20547
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
See announcement mail for list of new features:
https://lists.infradead.org/pipermail/linux-mtd/2025-February/108248.html
Cherry pick some upstream commits which fix build problems in some
situations.
autoreconf fixup is needed now otherwise the build fails with:
```
mtd-utils-2.3.0/missing: line 81: automake-1.16: command not found
```
The code in tests/ubifs_tools-tests/Makemodule.am does not build because
some test data is not packaged in the tar files, do not build code from
this directory.
The size increased only very little:
61498 bin/targets/ramips/mt7621/packages/nand-utils-2.3.0-r1.apk
101643 bin/targets/ramips/mt7621/packages/ubi-utils-2.3.0-r1.apk
61243 bin/targets/ramips/mt7621/packages/nand-utils-2.2.1-r1.apk
101291 bin/targets/ramips/mt7621/packages/ubi-utils-2.2.1-r1.apk
Link: https://github.com/openwrt/openwrt/pull/20540
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
d1fac9ec trace-cmd record: Always disable func_stack_trace in tracecmd_disable_all_tracing()
75e3b868 trace-cmd: utest: include libgen.h for POSIX basename()
176bc1f1 trace-cmd record: Fix compression when files are greater than 2GB
9da3427e trace-cmd lib: Use proper printf format specifiers
5f20c477 trace-cmd: Version 3.3.1
39acb4cc trace-cmd list: Use tracefs_filter_functions()
4eef18ff trace-cmd show: Add --max_latency
e4540079 trace-cmd list: Use tracefs_instances() to list instances
908d122e trace-cmd stat: Use tracefs_instances() instead of walking them
cc6de736 trace-cmd reset: Bail out immediately if user provides an invalid option
3c4fd59b trace-cmd reset: Add option to preserve specific dynamic events
19ceba14 trace-cmd reset: Update man page for -k option
bbea061f trace-cmd reset: Add bash tab completion for -B and -k
7f126040 trace-cmd utest: Add test cases for trace-cmd reset
5e8b3c16 trace-cmd lib: Prevent a memory leak in handle_options()
6295bcc1 trace-cmd record: Prevent a memory leak in show_error()
7abca575 trace-cmd lib: Check the return value of do_lseek() in trace_get_options()
22a1605c trace-cmd dump: Prevent buffer overrun in dump_clock()
52946308 trace-cmd record: Prevent memory leak in setup_network()
1b901134 trace-cmd lib: Prevent memory leak in tracecmd_create_event_hook()
59d2c3f9 trace-cmd mem: Prevent a memory leak in trace_mem()
969c36d2 trace-cmd record: Check the length of the protocol version received
201f95fd trace-cmd sqlhist: Fix missing initialization of a var
f10d39b8 trace-cmd .gitignore: Ignore utest/trace-utest in git
c76f2404 trace-cmd: Prevent buffer overflow in update_pid_filters()
db45fec2 trace-cmd: libtracecmd: Rename private functions to fix static building
d6cdfc23 trace-cmd: libtracecmd: Remove some unneeded line breaks
d14d790a trace-cmd lib: Prevent a memory leak in tracecmd_tsync_with_guest()
b948fbed trace-cmd lib: Prevent memory leak in tracecmd_msg_wait_for_cmd()
a1b5eee6 trace-cmd sqlhist: Initialize name in trace_sqlhist()
fee20bfb trace-cmd: Fix memory leak in stop_mapping_vcpus()
5f1eeba9 trace-cmd record: Fix stdin redirection to /dev/null
a1b8a0f5 trace-cmd meson: Add options for doc and utest build
24eed8d8 trace-cmd lib: Prevent a leaked FD in __tracecmd_create_buffer_recorder()
d6241881 trace-cmd sqlhist: Initialize err value to tracefs_sql()
179125a4 trace-cmd documentation: Fix typo in man of trace-cmd attach
e81cd4e3 trace-cmd lib: Copy message buffer content in get_trace_req_args()
b44a9a9f trace-cmd list: Check if any functions were found
9c44659e trace-cmd: Add trace-cmd set to bash completion (like start)
f4ede17d trace-cmd list: Show events in bash completion
2149da9c trace-cmd: Add sqlhist to bash completion
477bf923 trace-cmd: Install completion script in /usr/share/bash-completion/completions
6448ea34 trace-cmd show: Update help message for --hist and --trigger options
2fbeb317 trace-cmd list: Show all functions that match string by default
f339229f trace-cmd record: Fix compression on big-endian systems
e57b3d3e libtracecmd: Add missing error handling to trace-compress.c
b1db6f61 libtracecmd: Version 1.5.3
d0a17b4f trace-cmd: Version 3.3.2
24cdb0be trace-cmd completion: Fix trace-cmd report to show files
68bd953b trace-cmd: libtrace-cmd: Fix glob() return value checks
2d5c06e6 trace-cmd: record: Fix glob() return value checks
2c46eb6b trace-cmd split: Only open one file descriptor per CPU
9da7e594 trace-cmd: Version 3.3.3
Link: https://github.com/openwrt/openwrt/pull/20548
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Also the MT7987 RFB accidentally already set the not-yet-existing
mt798x-2p5g-phy-firmware-internal package as one of the DEVICE_PACKAGES.
This currently breaks the build, so remove it for now. Also remove stray
'blkid' package from DEVICE_PACKAGES which was accidentally copied from
MediaTek's SDK.
Fixes: 9de7189ed4 ("mediatek: build image for MT7987 RFB")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
11e0bee504c6 file: use lstat for file list (instead of stat) to reveal links
917000075eb4 iwinfo: add he and eht operation info to wifi scan
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://github.com/openwrt/openwrt/pull/20692
Signed-off-by: Robert Marko <robimarko@gmail.com>
This implements 65a1c666f2 ("hostapd: add SAE support for wifi-station
and optimize PSK file creation") and 913368a2 ("hostapd: add support for
SAE in PPSK option") for the ucode version as well.
Signed-off-by: Rany Hany <rany_hany@riseup.net>
Link: https://github.com/openwrt/openwrt/pull/19965
Signed-off-by: Robert Marko <robimarko@gmail.com>
40563018dc87 iwinfo: print HT operation only if present
5f4c213fc59f iwinfo: export HE and EHT operation in scan results
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://github.com/openwrt/openwrt/pull/20690
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
In the conversion to meson, this was overlooked.
Fixes e15d5cf752: ("tools/util-linux: build with meson")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20688
Signed-off-by: Robert Marko <robimarko@gmail.com>
Currently we unconditionally set it to 2.0 if 802.11ac and disregard
what the user set. This sets it to 2.0 only as a default in case
user didn't specify a tx_burst setting.
Signed-off-by: Rany Hany <rany_hany@riseup.net>
Link: https://github.com/openwrt/openwrt/pull/20565
Signed-off-by: Robert Marko <robimarko@gmail.com>
This is useful if multiple passwords were specified without
the use of a SAE password identifier. This is the only
way to get multiple passwords for a single peer to work
without resorting to password identifiers.
Unfortunately, support for password identifiers is non-existent
on Android and macOS; and possibly others. So this is the only
option in that case.
As an alternative, one could also continue to use WPA2-PSK instead
as that could easily resort to a bruteforce approach without any
complications.
Signed-off-by: Rany Hany <rany_hany@riseup.net>
Link: https://github.com/openwrt/openwrt/pull/20597
Signed-off-by: Robert Marko <robimarko@gmail.com>
As this is generally only useful with "proxy_arp" enabled,
we default na_mcast_to_ucast to true if "proxy_arp" is already
enabled.
Signed-off-by: Rany Hany <rany_hany@riseup.net>
Link: https://github.com/openwrt/openwrt/pull/20596
Signed-off-by: Robert Marko <robimarko@gmail.com>
The Plasma Cloud MCX3 Media Converter is a 3 port multi-GBit switch with
2x 10/100/1000/2500BaseT Ethernet ports and 1x SFP+ module slot.
Hardware:
- RTL9302C SoC
- Macronix MX25L25645G (32MB flash)
- Winbond W632GU6rB-11 (256MB DDR3 SDRAM)
- RTL8224 4x 10m/100m/1/2.5 Gigabit PHY
- IC+ IP802AR POE+ PSE controller
The media converter is powered by 54 Volts 1.2A barrel connector. The
internal TTL serial connector can be used to access the terminal. Pins from
1: TX RX (unused) GND. Serial connection is via 115200 baud, 8N1.
A reset button is accessible through a hole next to the SFP+ module slot.
Installation
------------
* The device can be flashed by using sysupgrade command. Either from the
original vendor firmware or using an initramfs (see "Debug")
* Connect serial as per the layout above. Connection parameters: 115200 8N1
* The image must be copied using scp to /tmp of the device
scp openwrt-realtek-rtl930x-plasmacloud_mcx3-squashfs-sysupgrade.bin root@[IP address of the device]:/tmp/
* start sysupgrade without saving the original vendor configuration
sysupgrade -n /tmp/openwrt-realtek-rtl930x-plasmacloud_mcx3-squashfs-sysupgrade.bin
Installation via u-boot
-----------------------
If you have an TFTP server connected to the switch, it is possible to
directly install the device using the factory image from u-boot
# setup networking and IP of TFP server
rtk network on
setenv ipaddr 10.100.100.99
setenv serverip 10.100.100.20
# get factory image
tftp 0x84000000 factory.bin
# erase firmware partitions
sf probe 0
sf erase 0x100000 0x01f00000
# write firmware to both partitions
sf write ${fileaddr} 0x100000 ${filesize}
sf write ${fileaddr} 0x1080000 ${filesize}
# adjust the boot commands
setenv bootargs "mtdparts=spi0.0:896k(u-boot),64k(u-boot-env),64k(u-boot-env2),15872k(inactive),15872k(firmware2)"
setenv bootcmd "rtk init; bootm 0xb5080000"
# restart
reset
Debug
-----
* Connect serial as per the layout above. Connection parameters: 115200 8N1.
* A tftp server is required, tftpd-hpa works well.
* Power the device, at U-Boot start rapidly hit Esc key to stop autoboot
* Enable network:
rtk network on
* Change ip address of device:
setenv ipaddr 192.168.1.6
* Download initramfs from TFTP server:
tftpboot 0x84000000 192.168.1.111:openwrt-realtek-rtl930x-plasmacloud_mcx3-initramfs-kernel.bin
* Boot loaded file:
bootm 0x84000000
Signed-off-by: Harshal Gohel <hg@simonwunderlich.de>
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20625
Signed-off-by: Robert Marko <robimarko@gmail.com>
The raw option inside 'config wifi-iface' is called hostapd_bss_options,
not hostapd_options.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20657
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
`list address` entries in /etc/config/dhcp are sometimes (I'm not sure
about the exact conditions) passed to upstream resolver, bypassing local
resolution. Adding them (minus the IP) to --local prevents this. In the
configuration, this means that
# /etc/config/dhcp
list address '/hello.com/world.com/1.2.3.4'
list address '/foo.com/bar.com/4.3.2.1'
which previously translated into
# /var/etc/dnsmasq.conf.*
address=/hello.com/world.com/1.2.3.4
address=/foo.com/bar.com/4.3.2.1
now becomes
# /var/etc/dnsmasq.conf.*
address=/hello.com/world.com/1.2.3.4
local=/hello.com/world.com/
address=/foo.com/bar.com/4.3.2.1
local=/foo.com/bar.com/
This behaviour is controlled by the `address_as_local` boolean option, which
defaults to false (old behaviour). openwrt/luci#7957 adds support for this flag
to LuCI.
A workaround for a small list of domains is to add them to `option local`,
but this is very tedious to do for every `list address` entry and dnsmasq
limits this option to 1024 characters.
Signed-off-by: Marko Zajc <marko@zajc.tel>
Link: https://github.com/openwrt/openwrt/pull/18610
Signed-off-by: Robert Marko <robimarko@gmail.com>
Because the firmware has not yet been accepted in linux-firmware we
cannot yet package mt7987-2p5g-phy-firmware-internal. Remove it from
DEVICE_PACKAGES of the BPi-R4-mini until the an upcoming linux-firmware
release will come with this firmware included, allowing us to then
create that package.
Fixes: 8b6c6978d6 ("mediatek: add support for BananaPi BPi-R4 Lite")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
The RTL930x and RTL931x have an ingress and egress bandwidth controller for
each port. They can can be used to reduce the throughput for each port.
They can be programmed via the the DSA flower offloading capabilities. Only
a limited functionality (bytes based rate limiter for ingress/egress) is
supported.
With kmod-sched-act-police, kmod-sched-flower and tc installed, each port
can have its ingress/egress rate limit applied in hardware using:
# tc qdisc del dev lan1 clsact
tc qdisc add dev lan1 clsact
tc filter add dev lan1 ingress flower skip_sw action police rate 100mbit burst 64k conform-exceed drop
tc filter add dev lan1 egress flower skip_sw action police rate 150mbit burst 64k conform-exceed drop
Signed-off-by: Issam Hamdi <ih@simonwunderlich.de>
Co-developed-by: Sven Eckelmann <se@simonwunderlich.de>
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20663
Signed-off-by: Robert Marko <robimarko@gmail.com>
In commit 042996b46b compilation of git repos is made to fail when PKG_MIRROR_HASH is not correct.
It looks like it was forgotten that in openwrt there is a posibility to set the PKG_MIRROR_HASH to "skip".
In this case the hash check should not be performed and compilation should continue as expected.
This is especially very usefull when doing local testing and development with git repos.
Signed-off-by: Matthias Franck <matthias.franck@softathome.com>
Link: https://github.com/openwrt/openwrt/pull/20655
Signed-off-by: Robert Marko <robimarko@gmail.com>
PKG_NAME was lost during package migration from "packages" feed to "main" feed.
Signed-off-by: Matthias Franck <matthias.franck@softathome.com>
Link: https://github.com/openwrt/openwrt/pull/20662
Signed-off-by: Robert Marko <robimarko@gmail.com>
On RTL930x, each SerDes pair shares a set of PLLs with different
capabilities (LC PLL: 1G/2.5G/10G, ring PLL: 1G/2.5G). In principle,
this allows any combination of speeds on a SerDes pair. However, it
creates a special case when trying to configure a SerDes for 10G while
the LC PLL is already in use at a slower speed for the neighbor SerDes.
The current implementation just gives up in that case. Instead, free up
the LC PLL by reconfiguring the neighbor SerDes to the ring PLL.
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Link: https://github.com/openwrt/openwrt/pull/20568
Signed-off-by: Robert Marko <robimarko@gmail.com>
This commit fixes mistaken executable bit on dts files.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://github.com/openwrt/openwrt/pull/20676
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
0aece3089a3a wifi: mt76: mt7996: Remove useless check in mt7996_msdu_page_get_from_cache()
05b3d899ad24 wifi: mt76: Move Q_READ/Q_WRITE definitions in dma.h
85e6517b0ac5 wifi: mt76: Add mt76_dev pointer in mt76_queue struct.
a3b6c67c97d2 wifi: mt76: Add the capability to set TX token start ID
141a81557070 wifi: mt76: Introduce the NPU generic layer
647d11bb17e0 wifi: mt76: mt7996: Add NPU offload support to MT7996 driver
8ff3b2bfc37f wifi: mt76: mt7996: fix typos in comments
0043147439b4 wifi: mt76: mt7925: refactor regulatory domain handling to regd.[ch]
f0e8fe441489 wifi: mt76: mt7925: refactor CLC support check flow
588cc87bf6a2 wifi: mt76: mt7925: refactor regulatory notifier flow
dac1d45fe94b wifi: mt76: mt7925: improve EHT capability control in regulatory flow
c166c4a0e750 wifi: mt76: mt7925: add auto regdomain switch support
d7b059bba166 wifi: mt76: mt7925: disable auto regd changes after user set
84f62a6beb99 wifi: mt76: mmio_*_copy fix byte order and alignment
f5ae5b2e8116 Revert "wifi: mt76: mt792x: improve monitor interface handling"
8ae7e6dc1d3a wifi: mt76: adjust BSS conf pointer handling
1b438ebe0d06 wifi: mt76: mt7925: cqm rssi low/high event notify
7519fa4ce62c wifi: mt76: mt7996: fix max nss value when getting rx chainmask
ea0580ad065f wifi: mt76: mt7996: no need to wait ACK event for SDO command
74112c2956fb wifi: mt76: mt7996: fix implicit beamforming support for mt7992
361d6bdac45d wifi: mt76: mt7996: support fixed rate for link station
d99274cdc30c wifi: mt76: mt7996: fix several fields in mt7996_mcu_bss_basic_tlv()
ad90a85b652b wifi: mt76: mt7996: fix teardown command for an MLD peer
e9fe8bc03e41 wifi: mt76: mt7996: set link_valid field when initializing wcid
050394665502 wifi: mt76: mt7996: use correct link_id when filling TXD and TXP
5d223855552c wifi: mt76: mt7996: fix MLD group index assignment
ab8361dbc421 wifi: mt76: mt7996: fix MLO set key and group key issues
7ce7ab881b3f wifi: mt76: mt7996: fix using wrong phy to start in mt7996_mac_restart()
1e0c23ff754b wifi: mt76: mt7996: fix EMI rings for RRO
eb567bc7f9b6 wifi: mt76: mt7925: ensure the 6GHz A-MPDU density cap from the hardware.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
It is not necessary to have two different family_id checks directly after
another. It is simpler to just combine both into one.
Suggested-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20637
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
The rtl838x_rate_control_init() and rtl839x_rate_control_init() functions
were never called because the rtl83xx_setup_qos() always returned after the
QoS configuration
Fixes: dc9cc0d3e2 ("realtek: add QoS and rate control")
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20637
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
This mainly improve the CFLAGS handling on compilation of OpenSSL.
The CFLAGS are currently passed 2 times generating compilation warning
due to -fhonour-copts passed 2 times.
This can be improved by passing the CFLAGS as env to the OpenSSL
Configure tool.
For consistency we do the same for CPPFLAGS and LDFLAGS.
This permits to drop redundant flags in the Compile phase and from the
.conf file.
Link: https://github.com/openwrt/openwrt/pull/20665
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
symtom: macs not properly incremented (all macs the same)
solution: set correct offset to mac location
Signed-off-by: Scott Mercer <TheRootEd24@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20664
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
According to CMake documentation[1]:
[CMAKE_FIND_ROOT_PATH] is a list of directories that contain the
target environment.
[CMAKE_FIND_ROOT_PATH_MODE_PROGRAM] sets the default behavior for the
find_program command.
In most cases, find_program is used to search for an executable which
will then be executed, e.g. using execute_process or
add_custom_command. So in most cases an executable from the build host
is required, so setting CMAKE_FIND_ROOT_PATH_MODE_PROGRAM to NEVER is
normally preferred.
Since CMAKE_FIND_ROOT_PATH is set to the target staging dir, and the
toolchain root dir, it will find target programs before the host ones.
An example of this problem is if you try to build antiblock from the
packages feed after llvm from the video feeds is built. Antiblock will
search for clang-format, pickup the target version, and fail to build.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
[1] https://cmake.org/cmake/help/book/mastering-cmake/chapter/Cross%20Compiling%20With%20CMake.html
Link: https://github.com/openwrt/openwrt/pull/20656
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
ba73bc4672ec CMakeLists: update cmake minimum required version to 3.10
988399770af1 libbb: CMakeLists: update cmake minimum required version to 3.10
ce546f3ebff5 opkg: CMakeLists: update cmake minimum required version to 3.10
80503d94e356 libopkg: CMakeLists: update cmake minimum required version to 3.10
Fixes: #20659
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
The BPi-R4 Lite uses the same defaults like all other BananaPi boards
to store the bootloader environment on the boot media.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
The BPi-R4 Lite is a WiFi-7 router board based on the MT7987 SoC.
Specification :
- SOC: Mediatek MT7987A (4x Cortex-A53
- RAM: 2GB
- Flash: 32MB SPI NOR, 256MB SPI NAND, 8GB eMMC
- Switch: MediaTek MT7531AE
- Ports : 4x LAN (1G), 1x SFP (via MT7531), 1x WAN (2.5G)
- Buttons : Reset & WPS/Mesh
- LEDs : Status (PWM), SFP
- USB: on-board VIA VL817 USB3.1/USB2.0 hub
* 1 - mPCIe B (SIM3)
* 2 - NGFF-KEYB (SIM1)
* 3 - USB-A connector
* 4 - mPCIe A (SIM4)
- mPCIe: 1x 8GT/s x2 or 2x 8GT/s x1 (configurable via bootloader)
- RTC: PCF8563
- mikroBUS socket with SPI, I2C and full UART
- on-board HT42B534 USB-to-serial for Type-C console port
- Power: USB Type-C PD 20V, or DC via barrel connector or JST-VH 3.96
Installation:
Uncompress *sdcard.img.gz and write to microSD card, eg. using 'dd'.
Use bootloader menu on the serial console to install SPI-NAND or SPI-NOR,
once installed to SPI-NAND you can use the bootloader menu to install to
eMMC. See instructions for BananaPi R3 for details.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
The BPi R4 Lite can boot from microSD, SPI-NAND, SPI-NOR and eMMC.
Build menu-driven U-Boot for each storage option.
Provide options for installation from microSD to SPI-NAND and SPI-NOR,
and from SPI-NAND to eMMC (similar to BPi-R3).
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Import and clean DT and DT-overlay files from MediaTek's SDK to build
an image with various DT-overlays for the MT7987 reference board.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Import patches to use cpufreq voltage calibration data from the efuse on
MT7988, and add support for MT7987.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
The MT7987 has two LVTS thermal sensors, one covering all CPU cores,
and one for the built-in 2.5GE PHY.
Add support for MT7987 to the LVTS thermal driver.
Thanks to Chad Monroe of Adtran for providing cleaned up patches for
Linux 6.6 which have been ported to Linux 6.12.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Compared to MT7988 (NETSYSv3) the Ethernet Frame Engine of MT7987
has been slighly updated (NETSYSv3.1), among other things the packet
scheduler (shaper) has apparently been reworked.
Import patches for basic support of the Ethernet Frame Engine of the
MT7987 SoC.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
The MT7987 is mostly a stripped-down low-pin-count version of the
MT7988 without the 10GBit/s SerDes. Most existing drivers can be reused.
Import to-be-sent-upstream patches doing all the groundwork for
basic support for the MT7987 SoC, adding clk, pinctrl and pwm support.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Build the (upstream) configuration for the MT7987 reference board, and
enable support for DT-overlay application which will be necessary to
use the image for the MT7987 RFB generated in OpenWrt.
Adapt our downstream patches (generic reset button, rootdisk selection)
for MT7987 to prepare for real-world boards.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Build TF-A for the MediaTek MT7987 SoC family.
Add necessary downstream patches in preparation for the BananaPi R4 Lite,
which connects both flash chips to SPI2 and got broken MMC bus.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Currently the detection of external-data FIT images works by checking
if the FIT structure is more than 4 kiB. However, for boards with lots
of different DT-overlays and configurations the FIT structure can
exceed 4 kiB which results in the FIT splitter to fail detecting the
rootfs.
Increase the threshold for external-data FIT to 512 kiB as there aren't
any kernel images smaller than that, and FIT structure less than 512 kiB
will always be an external-data FIT.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
