The most relevant change is the removal of the empty board_init()
functions by u-boot/u-boot@70a4d1fa1d, which makes many patches not
apply anymore and also requires most board defconfigs to be updated
by adding "# CONFIG_BOARD_INIT is not set" to them.
Also some config symbols have been renamed and downstream boards
had to be adapted accordingly:
u-boot/u-boot@0fd9a3480a ("env: Rename OVERWRITE_ETHADDR_ONCE to
ENV_OVERWRITE_ETHADDR_ONCE")
u-boot/u-boot@5fb88fa725 ("env: Rename SYS_REDUNDAND_ENVIRONMENT to
ENV_REDUNDANT")
u-boot/u-boot@123682c765 ("env: Rename SYS_RELOC_GD_ENV_ADDR to
ENV_RELOC_GD_ENV_ADDR")
u-boot/u-boot@0f44d5549e ("env: Rename SYS_MMC_ENV_DEV to
ENV_MMC_DEVICE_INDEX")
u-boot/u-boot@31617b880a ("env: Rename SYS_MMC_ENV_PART to
ENV_MMC_EMMC_HW_PARTITION")
u-boot/u-boot@ffc4914703 ("env: Rename ENV_MMC_PARTITION to
ENV_MMC_SW_PARTITION")
u-boot/u-boot@fb5235239a ("env: Rename DEFAULT_ENV_FILE to
ENV_DEFAULT_ENV_TEXT_FILE")
(also renamed USE_DEFAULT_ENV_FILE to USE_ENV_DEFAULT_ENV_TEXT_FILE)
Remove upstreamed patches:
* 001-mtd-spinand-winbond-add-Winbond-W25N04KV-flash-suppo.patch
u-boot/u-boot@fe37fb8214
* 002-mtd-spinand-gigadevice-sync-supported-chips-with-lin.patch
u-boot/u-boot@506ceddffd
* 003-net-mediatek-correct-the-AN8855-TPID-value-in-port-i.patch
u-boot/u-boot@70db2be9fb
* 004-01-serial-mediatek-fix-register-names-and-offsets.patch
u-boot/u-boot@6e15d3f91a
* 004-02-serial-mediatek-enable-baudrate-accuracy-compensatio.patch
u-boot/u-boot@6952209ef2
* 005-clk-mediatek-add-dummy-clk-enable-disable-ops-for-ap.patch
u-boot/u-boot@1bf2121297
* 006-env-Fix-possible-out-of-bound-access-in-env_do_env_s.patch
u-boot/u-boot@0ffd456516
* 130-01-env-mtd-add-the-missing-put_mtd_device.patch
u-boot/u-boot@39ae954b04
* 130-02-env-mtd-initialize-saved_buf-pointer.patch
u-boot/u-boot@7e842bd331
* 170-cmd-bootmenu-permit-to-select-bootmenu-entry-with.patch
u-boot/u-boot@8c986521c3
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Add a callback for a serdes setup function to rtpcs_cfg to allow each
SoC variant to define its own SerDes setup routine.
Call the setup_serdes operation in pcs_config if it is defined.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20352
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add more SerDes access helpers for the upcoming code import from PHY
driver. There, similar helpers are used to read and write full SerDes
registers or only parts of them (aka bitfields).
The helpers are expected to replace the following used in PHY SerDes
code:
- rtl9300_sds_field_r
- rtl9300_sds_field_w
- rtsds_931x_read
- rtsds_931x_read_field
- rtsds_931x_write
- rtsds_931x_write_field
Mark the helpers as unused for now to make the compiler happy. This will
be removed as soon as they are used.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20352
Signed-off-by: Robert Marko <robimarko@gmail.com>
This driver is required for the serial port on headless embedded AMD Ryzen
Embedded V3000 devices such as the SolidRun BEDROCK V3000.
Signed-off-by: Patrick Oppenlander <patrick.oppenlander@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20353
Signed-off-by: Robert Marko <robimarko@gmail.com>
There are two spi drivers for en7523/an7581/an7583:
* en7581-snand (spi-airoha-snfi.c)
* en7523-spi (spi-en7523.c)
The first one supports DMA, but until recently it has several nasty
issues. The second do things properly but does not support DMA.
Recently the first driver was greatly improved, so there is no sence
keep both drivers anymore.
This patch removes en7523-spi driver and use DMA capable driver instead.
Unfortunately there is a nasty en7523 specific issue.
We found that some serial console may pull TX line to GROUND during board
boot time. Airoha uses TX line as one of it's BOOT pins. This will lead
to booting in RESERVED boot mode. It was found that some flashes operates
incorrectly in RESERVED mode if DMA used.
This patch also adds a hack that turns off DMA and prints big fat warning
if booting in reserved mode was detected. This slow down flash operations
but does not kill your data.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Link: https://github.com/openwrt/openwrt/pull/20365
Signed-off-by: Robert Marko <robimarko@gmail.com>
This allows us use more easily port en7581 drivers to en7523.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Link: https://github.com/openwrt/openwrt/pull/20365
Signed-off-by: Robert Marko <robimarko@gmail.com>
This series improve network reliability.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Link: https://github.com/openwrt/openwrt/pull/20295
Signed-off-by: Robert Marko <robimarko@gmail.com>
This patch removes dirty hack used to:
* operate with flash
* pass flash page settings to linux driver via SNFI registers
It has been proven that spinand flash page size is actually unnecessary.
We can get all required data from dirmap requests. Thus this patch
series drops the hack and do things properly.
After this fix (and corresponding linux fix) the hack is not needed
anymore.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Link: https://github.com/openwrt/openwrt/pull/20295
Signed-off-by: Robert Marko <robimarko@gmail.com>
This patch series removes dirty hack that reads flash page settings from
SNFI registers during driver startup.
Before these patches the airoha spi snfi driver needs to know spinand
flash page size. The driver can't get it from spinand subsystem, so the
following approach was implemented:
* bootloader know the flash page size (and some other parameters)
* to operate properly the bootloader writes flash page size (and some
other parameters) to SNFI registers
* bootloader starts linux
* after linux start SNFI registers keeps the values stored by bootloader
* linux snfi driver reads flash parameters from SNFI registers.
This works, but we can do better. It has been proven that flash page size
is actually unnecessary. We can get all required data from dirmap requests.
This patch series drops the hack and do things properly.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Link: https://github.com/openwrt/openwrt/pull/20295
Signed-off-by: Robert Marko <robimarko@gmail.com>
This patch series greatly improve airoha snfi driver and fix a
number of serious bugs.
Fixed bugs:
* Fix reading/writing of flashes with more than one plane per lun
* Fill the buffer with 0xff before writing
* Fix reading of flashes supporting continuous reading mode
* Fix error paths
Improvements:
* Add support of dual/quad wires spi modes in exec_op(). This also
fix flash reading/writing if dirmap can't be created.
* Support of dualio/quadio flash reading commands
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Link: https://github.com/openwrt/openwrt/pull/20295
Signed-off-by: Robert Marko <robimarko@gmail.com>
Continuous reading mode is broken for some spi controllers. There are two
possible bug scenarios:
1) "continuous mode" flash and spi controller without dirmap support,
but with restriction on transfer length in adjust_op_size()
2) "continuous mode" flash and spi controller with dirmap support for a
single flash page
In the first case, any read that exceeds the limit specified in adjust_op_size()
will result in an EIO error. The limit may even be less than a size of a single
flash page. In this case, any read will result in an error.
In the second case, any read larger than flash page size will result in an EIO
error or spinand driver spoofing (because the spi controller driver returns
more bytes than were actually read).
This patch series tries to fix continuous reading (spinand driver side).
Unfortunately these fixes can't resolve "spinand driver spoofing" case.
Spi controller drivers might need fixes as well.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Link: https://github.com/openwrt/openwrt/pull/20295
Signed-off-by: Robert Marko <robimarko@gmail.com>
Current PKG_MIRROR_HASH is wrong, but it went unnoticed, because the
tarball is being fetched from @OPENWRT project mirrors. Can be
reproduced with:
make package/ppp/{download,check} FIXUP=1 DL_DIR=/tmp PKG_MIRROR_HASH=''
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Link: https://github.com/openwrt/openwrt/pull/20322
Signed-off-by: Robert Marko <robimarko@gmail.com>
Current PKG_MIRROR_HASH is wrong, but it went unnoticed, because the
tarball is being fetched from @OPENWRT project mirrors. Can be
reproduced with:
make package/ebtables/{download,check} FIXUP=1 DL_DIR=/tmp PKG_MIRROR_HASH=''
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Link: https://github.com/openwrt/openwrt/pull/20322
Signed-off-by: Robert Marko <robimarko@gmail.com>
Current PKG_MIRROR_HASH is wrong, but it went unnoticed, because the
tarball is being fetched from @OPENWRT project mirrors. After
042996b46b revert the correct hash can be reproduced with:
make tools/xxhash/{download,check} FIXUP=1 DL_DIR=/tmp PKG_MIRROR_HASH=''
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Link: https://github.com/openwrt/openwrt/pull/20322
Signed-off-by: Robert Marko <robimarko@gmail.com>
APK, unlike OPKG, can sign individual packages and not just indexes.
Since OpenWrt uses a distributed build infrastructure and only the build
master owns the private keys, signing of individual buildworkers doesn't
work. Right now, each buildworker creates a temporary build key to sign
packages, then transmits the package index to the buildmaster for a
signature.
As a result, all individual packages contain a nonsensical signature,
making them harder to reproduce. This commit removes the individual
package signing.
Since APK requires signatures per default, explicitly allow installation
of unsigned packages during the build process.
The config option here is for historical reasons misleading,
SIGNED_PACKAGES refers to the package index, not the individual
packages.
Signed-off-by: Paul Spooren <mail@aparcar.org>
Should be reset-gpio. Also added GPIO_ACTIVE_HIGH for clarity.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20116
Signed-off-by: Robert Marko <robimarko@gmail.com>
The former is deprecated. Fixes dtc warning.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20116
Signed-off-by: Robert Marko <robimarko@gmail.com>
The former is deprecated. Fixes dtc warning.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20116
Signed-off-by: Robert Marko <robimarko@gmail.com>
The former is deprecated. Fixes dtc warning.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20116
Signed-off-by: Robert Marko <robimarko@gmail.com>
The former is deprecated. Fixes dtc warning.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20116
Signed-off-by: Robert Marko <robimarko@gmail.com>
The latter is more descriptive in terms of what's going on.
Mostly found with
git grep gpios\ | grep 0\>
git grep gpios\ | grep 1\>
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20116
Signed-off-by: Robert Marko <robimarko@gmail.com>
The former is deprecated. Fixes dtc warning.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20116
Signed-off-by: Robert Marko <robimarko@gmail.com>
The package bump to version rc6 incorporates two recent changes, first, the
stored `mtime` honors SOURCE_DATE_EPOCH, making a prior "touch" obsolete.
Secondly the order of files added to created packages is now sorted, improving
reproducibility, too.
Signed-off-by: Paul Spooren <mail@aparcar.org>
In the conversion to nvmem of eax500 and unifi-ac-hd, the address was
set to 0 as is the case with most platforms, but not this one.
The wifi node also needs to be wrapped in a bridge node.
Matches every other device in ipq806x.
Fixes: 148f82ad45 ("ipq806x: use nvmem for wifi mac")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20325
Signed-off-by: Robert Marko <robimarko@gmail.com>
Changelog:
a52bda0 (HEAD, tag: v6.17) bump version to 6.17
c5bfa2a iw: add support to print link level information in station dump
efaf786 iw: Add support to set per-radio RTS threshold in multi-radio wiphy
009ad3b update nl80211.h
aef3798 iw: don't set stupid socket buffer size
8d52fb4 iw: scan: Add partial Multi-Link element printing
cfc0695 iw: print HE mcs correctly when mcs_len
8e4808f iw: Add command to enable/disable EPCS
85b79b3 update nl80211.h
612f9f5 iw: Prevent segfault in ftm get stats
1558e60 iw: print NO-EHT flags for reg get command
59660a3 iw: fix EHT capabilities on Big Endian platforms
8ea80d3 iw: scan: Add printing of EHT Operation Element
7c0511b util: rename hz to Hz vol 2
c2a12a5 util: rename hz to Hz
0cc98ae iw: scan: Decode additional WPA3 group ciphers
f04e5c5 iw: scan: Decode additional WPA3 AKM suite types
41a07a8 iw: fix HE operation on Big Endian platforms
c41971e iw: fix HE capabilities on Big Endian platforms
a6ad3f1 iw: scan: add eht capability parsing
4c85991 iw: util: update and clean up eht capa printing
a0a7dde iw: scan: replace passed ie buffer with ie context
7bc2a84 iw: print tx power per link for MLD
478ddd4 iw: add output for wiphy interface combinations
93e2309 update nl80211.h
966c590 iw: scan: add enum for element IDs
422419e scan: Add printing of HE Operation Element
d088c8a update nl80211.h
73231dd iw: fix formats under MIPS64/PPC
8609336 iw: remove sizer section and related code
c8b9e77 util: clarify comment about 'parsed' pointer
b29da20 iw: add puncturing support
cce9897 iw: refactor frequency help
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://github.com/openwrt/openwrt/pull/20321
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This patch adds support for Cudy C200P.
Specifications:
SoC: MediaTek MT7621AT
RAM: 256 MB (DDR3)
Flash: 16 MB (NOR)
POE Chip: IP804AR
Interfaces:
Switch: 1 WAN, 4 LAN (Gigabit)
Gigabit RJ45 PoE Ports on 2~5
Max Power on a Single PoE Ports 30W
PoE Ports : The PoE ports comply with IEEE 802.3at/af standards.
Ports: 1 USB-A 3.0 Ports
LED:
System
PoE Max Status
Link/ACT/PoE Status of Each PoE Port
Physical Buttons:
Reset Button
Power Input:
DC Jack
Power Methods:
DC: 54V 1.11A
802.3at/af PoE
Passive PoE: 24/48V
Max Power Consumption (W):
Total: 60W
PoE: 55W
PoE (when USB Device is plugged in): 50W
No PoE: 5W
Installation:
To install OpenWRT, you need the intermediate firmware from Cudy. (U-boot is locked). After installing the intermediate firmware, you can install OpenWRT via sysupgrade.
Recovery:
TFTP available.
1. Place the recovery.bin in the serving directory of your TFTP server.
2. Set your IP to 192.168.1.88/24.
3. Press the “Reset” button of Cudy router and hold it. Before the Cudy router is powered on and before TFTP start to download the firmware, don't release the “Reset” button.
4. Power on the Cudy router.
5. You can release the reset button only when TFTP starts downloading firmware.
6. When the SYSTEM LED turns solid green, the upgrade is complete.
Serial:
1. Serial connection parameters: 115200 / 8N1
2. Serial connection voltage: 3.3V
PoE is not supported at the time of PR. The IP804R chip is not yet supported by OpenWRT.
Signed-off-by: Marcin Leksmark <lexmark3200@wp.pl>
Link: https://github.com/openwrt/openwrt/pull/20165
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Not hashing CWD is potentially unsafe since it involves deliberately
poisoning the cache in certain situations in exchange for performance
gain. It can lead to debug information pointing out either no longer
existing or much worse incorrect source files, possibly leading
developers onto a false track and wasting a lot of time.
If one wishes to save build time by sharing the cache between multiple
source trees, this can be achieved safely by enabling reproducible
debug information, like this:
CONFIG_CCACHE_DIR="$(HOME)/.ccache"
CONFIG_REPRODUCIBLE_DEBUG_INFO=y
Note that CWD hashing gets disabled implicitly when reproducible debug
information is enabled. The CCACHE_NOHASHDIR option is only for
disabling CWD hashing in cases where it is not safe to do so.
Signed-off-by: Erik Karlsson <erik.karlsson@iopsys.eu>
Link: https://github.com/openwrt/openwrt/pull/20317
Signed-off-by: Robert Marko <robimarko@gmail.com>
The A1 and B1 devices are largely the same. The differences
seem to be:
- RTL8218D (A1) vs RTL8218E (B1) PHY for the eight 1 Gbps TP ports
- Aquantia (A1) vs RTL8261N (B1) PHY for the three 10 Gbps TP ports
RTL8218D/E share the same driver and support was added already by
commit c8c187f0f0 ("realtek: add support for RTL8218E").
The RTL8261N is also already supported but it's located at
different addresses compared to the A1 device. This requires
the device tree to be split. As a result, the devices are require
different images.
I found the smi addresses on the forum:
https://forum.openwrt.org/t/support-for-rtl838x-based-managed-switches/57875/3622
And I can conform on my B1 device that this is working.
Co-developed-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Thomas Martitz <thomas.martitz@mailbox.org>
Link: https://github.com/openwrt/openwrt/pull/20150
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
There are switches which share the same overall hardware design but remove
just a couple of components for the low cost variant. For example, a 8+2
(ethernet+SFP) switch might have a low cost variant which only has 8
ethernet ports. In this case, the PCB will be shared but components for SFP
will just be dropped.
The LED shift registers will be the same between the two switches but the
ports are different. But since the rtl930x_led_init code is trying to
calculate the number of LEDs using the LED ports, the ethernet status ports
will then suddenly be shifted by two ports.
It is therefore necessary to have a mechanism to overwrite the detection of
the ethernet ports in the LED initialization and force some ports to
"virtually there" for the LED controller.
This functionality was already implemented for Plasma Cloud PSX8 (RTL930x)
but some devices using RTL931x might also benefit from a similar feature.
Signed-off-by: Harshal Gohel <hg@simonwunderlich.de>
Co-developed-by: Sven Eckelmann <se@simonwunderlich.de>
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20300
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The LED sets must be configured before per-port LEDs are actually assigned.
At the same time, the LED set configuration was basically unreadable and
the RTL930x from commit 2cfb1ecf10 ("rtl930x: Rework per port LED
configuration") does a better job. Instead of moving the old implementation
around, just adopt the one from RTL930x.
Signed-off-by: Harshal Gohel <hg@simonwunderlich.de>
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20300
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
RTL930x received support for specifying active low/high LEDs in commit
bec9e79a99 ("realtek: dsa: support active-high LEDs"). But this was
completely forgotten on RTL931x.
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20300
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The usage of pr_* helper inside a device driver should be avoided. The
dev_* helper provide more context about which device the message actually
is.
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20300
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The integration of the LED set initialization for RTL931x added also minor
improvements in the coding style. Just adopt them also for RTL9301x.
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20300
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
of_property_count_u32_elems returns the number of u32 and not the number of
bytes. It must therefore be checked against the number of u32 in set_config
and not the bytes in set_config.
Fixes: 2cfb1ecf10 ("rtl930x: Rework per port LED configuration")
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20300
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
There are switches which share the same overall hardware design but remove
just a couple of components for the low cost variant. For example, a 8+2
(ethernet+SFP) switch might have a low cost variant which only has 8
ethernet ports. In this case, the PCB will be shared but components for SFP
will just be dropped.
The LED shift registers will be the same between the two switches but the
ports are different. But since the rtl930x_led_init code is trying to
calculate the number of LEDs using the LED ports, the ethernet status ports
will then suddenly be shifted by two ports.
It is therefore necessary to have a mechanism to overwrite the detection of
the ethernet ports in the LED initialization and force some ports to
"virtually there" for the LED controller.
Signed-off-by: Harshal Gohel <hg@simonwunderlich.de>
Co-developed-by: Sven Eckelmann <se@simonwunderlich.de>
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20300
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Support for color output has existed in iproute2 since forever and we
never compile it out, even in tiny variants. As such, not requiring
people to constantly add -c to their ip commands is a nice QoL feature.
Signed-off-by: George Tsiamasiotis <george@tsiamasiotis.gr>
Link: https://github.com/openwrt/openwrt/pull/20281
Signed-off-by: Robert Marko <robimarko@gmail.com>
Previously we relied on the iproute2 makefile automatically running the
configure script on first run. This does not allow control of some
configure options, or of when the configure script is re-run.
The motivating usecase here is ./configure --color=auto, though that is
not implemented in this commit.
Signed-off-by: George Tsiamasiotis <george@tsiamasiotis.gr>
Link: https://github.com/openwrt/openwrt/pull/20281
Signed-off-by: Robert Marko <robimarko@gmail.com>
This commit renames all management network ports of the
SN2100, SN2700, SN3420, and SN3700 switches based
on their PCI address during boot.
For the default network config, the management and
QSFP port(s) are put into the br-lan bridge.
Signed-off-by: Til Kaiser <mail@tk154.de>
Link: https://github.com/openwrt/openwrt/pull/17251
Signed-off-by: Robert Marko <robimarko@gmail.com>
