Add support for esmt F50L1G41LC flash chip. It is used in some recent
Cudy devices.
Link: https://github.com/openwrt/openwrt/pull/20962
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
IPQ5018 based boards come in multiple wireless architectures.
The SOC itself provides 2.4G wifi while 5G wifi is added by either an
IPQ5018-specific QCN6122 (2x2) solution or by the more generally
available PCIe-based QCN9074 (4x4) wifi chip.
On IPQ5018/QCN6122-based boards, both QCN6122 and IPQ5018 wifi is
initialized by IPQ5018 firmware which comes in different versions:
- IPQ5018: firmware files to initialize WCSS and the internal wifi chip
- IPQ5018/QCN6122: above + additional firmware segments to initialize
the QCN6122 chip incl. (de-)assertion of resets and clocks enablement
OpenWrt currently packages the combined IPQ5018/QCN6122 firmware for
both architectures. As such, let's switch to using IPQ5018-only firmware
for boards not packed with QCN6122 chip(s) and keep using the shared
firmware for devices that do have QCN6122(s) chips.
This helps us move to using upstreamed IPQ5018 firmware while using the
legacy repo for IPQ5018/QCN6122 firmware and rule out any initialization
conflicts/issues caused by loading QCN6122 on IPQ5018-only boards.
While at it, default to the secure WCSS remoteproc driver sent upstream
for review, move QCN6122 wifi nodes to a separate dtsi, override the Q6
node to load the multi-PD-based architecture remoteproc driver for
needed only by IPQ5018/QCN6122 designs, reference said dtsi in
boards packed with QCN6122 wifi chip(s), and add provision for migrating
the radio path as the wifi nodes now adhere to linux device tree naming
conventions.
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/20928
Signed-off-by: Robert Marko <robimarko@gmail.com>
Since version 4.8.0, OPTEE handles correctly RTC clock configuration for
STM32MP15 based boards. So the patch can be dropped.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/20953
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Bump uboot-stm32 to upstream release 2025.10 and remove upstreamed patch.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/20953
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Overwrite default Quilt/Refresh/Package and use the Kernel variant to
correctly refresh bpf-headers patches.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Switch to Meson build system and add missing dependency for
libtraceevent-extra.
This switch indirectly fix a compilation error on 32bit target that
weren't getting correct target CFlags. Using Meson fix honour our CFlags
and fix the compilation error.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Since now we default to 6.12 and we dropped any support for kernel 6.6,
drop any dependency on it.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Since now we default to 6.12 and we dropped any support for kernel 6.6,
drop any dependency on it.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Once kernel 6.6 support ends, its dependencies will become redundant.
Remove them and keep only those for kernel 6.12.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/20943
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
If board_detect is interrupted by cutting power on first boot,
board.json might only be half-way written and the file will not be
written again correctly on subsequent boots.
Write to a temporary file first, then rename. Since a rename on the same
file system is an atomic operation, it ensures that either
/etc/board.json does not exist or that the complete file exists.
Signed-off-by: Andreas Gnau <andreas.gnau@iopsys.eu>
Link: https://github.com/openwrt/openwrt/pull/20831
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* SC2166 (warning): Prefer [ p ] && [ q ] as [ p -a q ] is not well
defined.
* SC2086 (info): Double quote to prevent globbing and word splitting.
* SC2091 (warning): Remove surrounding $() to avoid executing output
(or use eval if intentional).
Signed-off-by: Andreas Gnau <andreas.gnau@iopsys.eu>
Link: https://github.com/openwrt/openwrt/pull/20831
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The D-Link DNS-325 A1 is NAS with 2x HDD (3.5 inch) bays, 1x 10/100/1000Base-T port and 1x USB 2.0 port
Device specification:
SoC: Marvell 88F6281-A1 1.2 GHz
RAM: 256 MB (2xSEC K4T1G084QF-HCF7:128Mx8 @400 CL6)
Flash: 128 MB (SAMSUNG 946 K9F1G08U0B PCB0)
SATA: 2x internal SATA II drives
Ethernet: 1x Gigabit (Marvell 88E1116R-NNC1)
LED: 7x (white: Power, white/red: Right SATA Activity, USB Activity, Left SATA Activity)
Key: 3x (Power, Reset, USB Copy/Unmount)
Serial: 5 pin header (RXD,GAP,3.3V,GND,TXD), (115200,8,N,1), 3.3V TTL
USB ports: 1x USB 2.0
Flash instruction:
NOTE: this process uses a serial connection. It will upgrade the bootloader and reset the bootloader environment variables
USB flash stick setup
Format to FAT32 without mbr
Copy these files to USB flash stick: dlink_dns-325-a1-initramfs-uImage dlink_dns-325-a1-squashfs-factory.bin dlink_dns-325-a1-squashfs-sysupgrade.bin u-boot.kwb (from u-boot-dns325 directory)
NAS setup
Connect LAN cable between router and NAS device
Connetc USB flash stick to NAS device
Connect serial to NAS device
Boot from new u-boot and install it
$ kwboot -p -b u-boot.kwb -B115200 -t /dev/ttyUSB0
Power on NAS
After download copleted and booted NAS device with new u-boot stop in bootloader by pressing any key
=> usb start
=> fatload usb 0 0x1000000 /u-boot.kwb
=> nand erase.part u-boot
=> nand write 0x1000000 u-boot ${filesize}
=> reset
Update MAC address in u-boot env
Stop in bootloader by pressing any key
Get your MAC address from label on chassis
=> setenv ethaddr XX:XX:XX:XX:XX:XX
=> saveenv
Install OpenWrt by flashing factory image from u-boot
=> usb start
=> fatload usb 0 0x1000000 /dlink_dns-325-a1-squashfs-factory.bin
=> nand erase.part ubi
=> nand write 0x1000000 ubi ${filesize}
=> reset
Based-on: #9296
Signed-off-by: Konstantin Meshkov <skyline@mail.ru>
[ refresh uboot patches ]
Link: https://github.com/openwrt/openwrt/pull/17924
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add pending patch to fix RSSI station data on IPQ5018 and QCN6122.
Signed-off-by: Scott Mercer <TheRootEd24@gmail.com>
[ improve commit description, replace patch ]
Link: https://github.com/openwrt/openwrt/pull/20834
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
MUSL doesn't provide PTHREAD_RWLOCK_PREFER_WRITER_NONRECURSIVE_NP as
it's only glibc and as the MACRO say, it's NP (not portable).
Add patch to check for this and disable overwriting the function
accordingly.
Fixes: 9bdf723476 ("libunistring: update to 1.4.1")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Adds missing default value for na_mcast_to_ucast when proxy_arp is not enabled
in order to silence the following msg:
daemon.notice: netifd: radio1 (xxxx): sh: out of range
Fixes: bcdb29f78f ("wifi-scripts: add na_mcast_to_ucast option")
Reported-by: Antony Kolitsos <zeusomighty@hotmail.com>
Signed-off-by: Rany Hany <rany_hany@riseup.net>
Link: https://github.com/openwrt/openwrt/pull/20806
Signed-off-by: Robert Marko <robimarko@gmail.com>
When transitioning from a config with one or more wifi-stations, to a configuration
that has no wifi-station; the file would not be empty/reset and the old wifi-station
entries would remain.
This is because iface_wpa_stations and iface_sae_stations return early if there
are no wifi-stations present, which is an incorrect behavior as it causes the
file to actually have old entries.
'sae_password_file' and 'wpa_psk_file' are also set by default inside
of iface_auth_type to same path as the one used by wifi-station, so it
is indeed going to be set in the config and would contain the old
entries.
This happens with reload and wifi restart. So the only solution
would be to manually remove the file.
Signed-off-by: Rany Hany <rany_hany@riseup.net>
Link: https://github.com/openwrt/openwrt/pull/20700
Signed-off-by: Robert Marko <robimarko@gmail.com>
Similar to "wifi-scripts: iface should be optional in wifi-vlan definition"
(98435a3), wifi-station iface should also be optional. By default, it is
supposed to match all interfaces if omitted.
Fixes: https://github.com/openwrt/openwrt/issues/20705
Signed-off-by: Rany Hany <rany_hany@riseup.net>
Link: https://github.com/openwrt/openwrt/pull/20694
Signed-off-by: Robert Marko <robimarko@gmail.com>
Dump and verify commands can be used on read-only devices.
Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20725
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
JIT support in pcre2 allows for extra performance for regex operations in
applications that support it. As outlined in
https://pcre.org/current/doc/html/pcre2jit.html#SEC2 64-bit ARM is
supported.
I tested this on an GL.Inet MT6000 which is an aarch64 device and to my
knowledge everything works as expected. The primary application I tested
this on was haproxy, which makes use pcre for several operations.
If there are no known downsides or known breakages I suggest to
default-enable this feature for aarch64.
Signed-off-by: Christian Lachner <gladiac@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20891
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Changelog:
Notable Changes
- Several updates and fixes for systemd
- Add new permissions and policy capabilities
- Drop reiserfs support (it was removed in kernel 6.13)
New Modules
- bubblewrap
- incus
- kanidm
- seatd
- opensnitch
Refresh patch:
- 100-no-docs.patch
Link: https://github.com/openwrt/openwrt/pull/20861
Signed-off-by: Nick Hainke <vincent@systemli.org>
