This mainly improve the CFLAGS handling on compilation of OpenSSL.
The CFLAGS are currently passed 2 times generating compilation warning
due to -fhonour-copts passed 2 times.
This can be improved by passing the CFLAGS as env to the OpenSSL
Configure tool.
For consistency we do the same for CPPFLAGS and LDFLAGS.
This permits to drop redundant flags in the Compile phase and from the
.conf file.
Link: https://github.com/openwrt/openwrt/pull/20665
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
ba73bc4672ec CMakeLists: update cmake minimum required version to 3.10
988399770af1 libbb: CMakeLists: update cmake minimum required version to 3.10
ce546f3ebff5 opkg: CMakeLists: update cmake minimum required version to 3.10
80503d94e356 libopkg: CMakeLists: update cmake minimum required version to 3.10
Fixes: #20659
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
The BPi-R4 Lite uses the same defaults like all other BananaPi boards
to store the bootloader environment on the boot media.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
The BPi R4 Lite can boot from microSD, SPI-NAND, SPI-NOR and eMMC.
Build menu-driven U-Boot for each storage option.
Provide options for installation from microSD to SPI-NAND and SPI-NOR,
and from SPI-NAND to eMMC (similar to BPi-R3).
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Build the (upstream) configuration for the MT7987 reference board, and
enable support for DT-overlay application which will be necessary to
use the image for the MT7987 RFB generated in OpenWrt.
Adapt our downstream patches (generic reset button, rootdisk selection)
for MT7987 to prepare for real-world boards.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Build TF-A for the MediaTek MT7987 SoC family.
Add necessary downstream patches in preparation for the BananaPi R4 Lite,
which connects both flash chips to SPI2 and got broken MMC bus.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
warning print "ath11k c000000.wifi: failed to flush transmit queue 0"
is observed during busy times.
The mac80211 fallback implementation of `flush_sta` does not handle the per STA queues well.
This is fixed by providing a ath11k specific implementation of flush_sta telling the firmware to flush a given station.
The draining of the transmit queues should therefore stop correctly, even if new packets arrive in the mean time.
An upstream ath11k RFC is available at:
https://patchwork.kernel.org/project/linux-wireless/patch/GV1P250MB14333A5BF24623C4753A10E1E8E0A@GV1P250MB1433.EURP250.PROD.OUTLOOK.COM/
The patch was tested on a Xiaomi AX3600.
Signed-off-by: Florian Maurer <f.maurer@outlook.de>
Tested-by: Florian Maurer <f.maurer@outlook.de>
Co-authored-by: Benjamin Berg <benjamin@sipsolutions.net>
Tested-by: Flole <flole@flole.de>
Link: https://github.com/openwrt/openwrt/pull/20293
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Patch CMakeLists.txt for cmake 4.x compatibility.
New cmake versions require at least 3.5 as 'cmake_minimum_required'
in CMakeLists.txt. In future 3.10 will be required.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Link: https://github.com/openwrt/openwrt/pull/20265
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Patch CMakeLists.txt in selected apps for cmake 4.x compatibility.
New cmake versions require at least 3.5 as 'cmake_minimum_required'
in CMakeLists.txt. In future 3.10 will be required.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Link: https://github.com/openwrt/openwrt/pull/20265
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Patch CMakeLists.txt in selected apps for cmake 4.x compatibility.
New cmake versions require at least 3.5 as 'cmake_minimum_required'
in CMakeLists.txt. In future 3.10 will be required.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Link: https://github.com/openwrt/openwrt/pull/20265
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Edit CMakeLists.txt to fulfill cmake 4.0 requirement that
cmake_minimum_required is now at least 3.5 and in future 3.10.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Link: https://github.com/openwrt/openwrt/pull/20265
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
d44af6dd8f4e dhcpv6: create struct dhcpv6_lease
4df45c8c3722 dhcpv4: create struct dhcpv4_lease
a6dccae41b60 odhcpd: struct lease -> struct lease_cfg
fc0abb66f122 dhcpv4: use leasetime from a->lease
74eeff193848 router: always use link-local src address for RAs
b9a071b8341f router: Rewrite the ingress MTU to one configured for the interface
1ef9e0e610d5 router: utilize interface ra_mtu for RA
1480c09ee0aa config: clamp ra_mtu to interface MTU, and default ra_mtu to interface MTU
ee4f0df6bd68 netlink: Store interface MTU at link change
d174e25e85a1 github: fix CI apt dependencies
8f393d55a76e odhcpd: more fixes for IID calculations
fc27940fe9...d44af6dd8f
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
b3e1db42b4db odhcp6c: fix safe interval processing to follow RFC 4862
63461f64d4c1 dhcpv6: always include IA_NA and IA_PD in Request message if requested
1051cabb4da3 dhcpv6: fix incorrect IA type being printed in syslog
c5237eabeb5c odhcp6c: prevent RELEASE at shutdown when -k is set
a01b1ff1e50f odhcp6c: fix client exiting if Renew and Rebind fails
4839bf6d0feb odhcp6c: implement RKAP: Reconfiguration Key Authentication Protocol
52a9a847def4 dhcpv6: fix solicit loop when server has no address available
7b1f67c23de6 ubus: implement ubus methods to force a Renew and Release
2b0e8f2d8541 ubus: implement retransmission configuration via ubus
8d89d373f360 odhcp6c: add failure when -E option is used without ubus support enabled
58f3c9eb1163 odhcp6c: add new argument option to disable script call
1048fc4fb622 reconfigure: move all configuration functions to a new file
93f056d3a1f2 reconfigure: implement DHCP reconfiguration
af669fb23cd3 dhcpv6: implement statistics for DHCPv6
3a1a599fecb7 ubus: implement UBus method to get state data immediately
44c50214997d ubus: emit UBus event on DHCP state changes
33b972bc526a ubus: connect to UBus backend
2f609f248faf odhcp6c: implement asynchronous handling for DHCPv6 State
6466314e7f62 odhcp6c: enable Non-Blocking DHCPv6 Socket
1df65f0caf46 dhcpv6: refactor dhcp_request Function
047c63a8156b dhcpv6: add t1 and t2 transmission
1b5f0c402bbf dscp: add option to set dscp value
96017df54d8f dhcpv6: fix wrong retransmission of DHCPv6 Solicit
b929fc8a1cfd odhcp6c: add a simple build script
adc651ffed55 cmake: make libubox mandatory
5182e2b696ef cmake: drop EXT_PREFIX_CLASS
8d052c52e18d cmake: disable pedantic
f2521b296b21 github: fix CI apt dependencies
77e1ae21e6...b3e1db42b4
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
If proto 'dhcpv6' is set for an interface, dynamic interfaces are created
for the protocols map, dslite or 464xlat if this netifd protocols are
installed and the interface option is not explicitly set to '0'.
The problem is that this option cannot be configured via LuCI, which means
that the dynamic protocols are started. In my case, that is the '464xlat'
'6in4' protocol. I see the follwing log messages continuously in the log as
I do not have a '464xlat' in my network.
Fri Aug 22 10:36:33 2025 daemon.notice netifd: Interface 'wan6_4' is now down
Fri Aug 22 10:36:33 2025 daemon.notice netifd: Interface 'wan6_4' is setting up now
Fri Aug 22 10:36:36 2025 daemon.notice netifd: Interface 'wan6_4' is now down
Fri Aug 22 10:36:36 2025 daemon.notice netifd: Interface 'wan6_4' is setting up now
To fix this by adding a new option to disable the dynamic interface creation
for '4in6' if needed. The option is named '4in6_dynamic' and is a boolean.
If the new option is 'true' (default) dynamic interfaces are create.
If the new option set to 'false' no dynamic 4in6 interface are created.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
The variable definitions are very confusing. Therefore, this commit groups
them together so that the line length is not exceeded.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
This allow configuring the MTU of the ds-lite tunnel.
Updates #8190
Signed-off-by: Mateusz Poliwczak <mpoliwczak34@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20606
Signed-off-by: Robert Marko <robimarko@gmail.com>
This allows wpa_supplicant to process pending netlink socket messages
first. Without this change, there is a race condition where the newly
created interface processes netlink events from the removal of the
previous interface.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This makes it possible to have more flexible control over the supplicant
without having to install wpa_cli.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Commits d205878ede and 46cf10771a relabeled the supported Zyxel devices
from v1/v2 to A1/B1, but board setup files were overlooked.
Fixes: d205878ede ("rtl838x: rename GS1900 series v1/v2 to A1/B1")
Fixes: 46cf10771a ("rtl839x: rename GS1900 series v1/v2 to A1/B1")
Signed-off-by: Stijn Segers <foss@volatilesystems.org>
Link: https://github.com/openwrt/openwrt/pull/20590
Signed-off-by: Robert Marko <robimarko@gmail.com>
AUTORELEASE has been deprecated from a long time. Drop it and hardcode
the release following the current one present in the downloads
repository.
Link: https://github.com/openwrt/openwrt/pull/20586
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
AUTORELEASE has been deprecated from a long time. Drop it and hardcode
the release following the current one present in the downloads
repository.
Link: https://github.com/openwrt/openwrt/pull/20586
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
AUTORELEASE has been deprecated from a long time. Drop it and hardcode
the release following the current one present in the downloads
repository.
Link: https://github.com/openwrt/openwrt/pull/20586
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
AUTORELEASE has been deprecated from a long time. Drop it and hardcode
the release following the current one present in the downloads
repository.
Link: https://github.com/openwrt/openwrt/pull/20586
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
AUTORELEASE has been deprecated from a long time. Drop it and hardcode
the release following the current one present in the downloads
repository.
Link: https://github.com/openwrt/openwrt/pull/20586
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
AUTORELEASE has been deprecated from a long time. Drop it and hardcode
the release following the current one present in the downloads
repository.
Link: https://github.com/openwrt/openwrt/pull/20586
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This reverts commit 096739a93d.
The new fortify-headers version needs some more work to be usable in
OpenWrt. Revert this to fix the builds again.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add compatibility with the new fortify-headers 2.3.3 by
disabling two warnings.
Fixes: 6268692bd2 ("toolchain: fortify-headers: Update to version 2.3.3")
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Link: https://github.com/openwrt/openwrt/pull/20552
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Fixes the following error by backporting upstream update:
```
scripts/dtc/pylibfdt/libfdt_wrap.c: In function ‘_wrap_fdt_next_node’:
scripts/dtc/pylibfdt/libfdt_wrap.c:5581:17: error: too few arguments to function ‘SWIG_Python_AppendOutput’
5581 | resultobj = SWIG_Python_AppendOutput(resultobj, val);
| ^~~~~~~~~~~~~~~~~~~~~~~~
```
This is the same fix as applied in 4e68103c4e ("uboot-rockchip: fix build with swig 4.3.0")
Link: https://github.com/openwrt/openwrt/pull/20538
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
With this change, the interface identifier can be configured via LuCI.
Signed-off-by: Peter Meiser <peter.meiser@gmx.com>
Link: https://github.com/openwrt/openwrt/pull/19318
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add pending patch that disable libmagic support as this cause
reproducibility issue due to timing of presence of libmagic library at
times e2fsprogs gets compiled.
The new patch adds control on libmagic inclusion and we add the
--without-libmagic to the configure args by default.
Reported-by: Paul Spooren <mail@aparcar.org>
Link: https://github.com/openwrt/openwrt/pull/20499
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Drop redundant patch for host build as this has been fixed in 1.44.1
but for some reason it wasn't notice with the patch directly refreshed
(with the fix right up)
Fixes: 198172c048 ("package/utils/e2fsprogs: update to 1.44.1")
Link: https://github.com/openwrt/openwrt/pull/20499
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
0d0fac30075f dhcpv4: bump problem scenario up to warn
bf6137092346 config: properly set log level from uci
7956f4271b4e dhcpv6: RFC4833 timezones
7000557cd8f6 dhcpv6-ia: respect prefix assigned to interface (>= /64)
e1e60601ffeb odhcpd: improve odhcpd_urandom()
c2eb4b59f107 config: fix erroneous clamp message if clamp value == max
54b9e729b00d dhcpv4: bail earlier on release/decline
417f4b11d352 dhcpv4: don't hardcode options array length
d63fa3c3612c dhcpv4: shrink struct dhcpv4_message
9653b43617e3 dhcpv4: use iovec for forcereconf messages, fix hash
bf41f4edfbe3 dhcpv4: fix padding of iovec message in dhcpv4_handle_msg()
be68f423c528 dhcpv4: some minor cleanups post-iovec
e24a371ef714 dhcpv4: use iovec for forcerenew opts
bd353e891ae6 dhcpv4: use iovec for router and DNS server
b81cfaa7859e dhcpv4: use iovec for DNS search and MTU
578a9289440b dhcpv4: use iovec for netmask/hostname/broadcast
5bafc17b79d8 dhcpv4: use iovec for leasetime/renew/rebind
b63448ffe447 dhcpv4: introduce a reply_opts array
0533eaea0a94 dhcpv4: use iovec for DNR
6329e37d595d dhcpv4: use iovec for NTP
87fee619205d dhcpv4: use iovec for message and serverid
2f97bf0b56de dhcpv4: reorder some more variables in dhcpv4_handle_msg()
18c1b02bdc20 dhcpv4: remove one more variable from dhcpv4_handle_msg()
6fd691ff29cd dhcpv4: move dest handling from dhcpv4_handle_msg()
1f803caf9a1f dhcpv4: don't copy reqopts around
b1be3984ebf8 dhcpv4: more refactoring of dhcpv4_handle_msg()
85717bedf8ce dhcpv4: clarify variable names in dhcpv4_handle_msg()
be864ccf9919 dhcpv4: some more cleanups to dhcpv4_handle_msg()
f87464520564 dhcpv4: preparations for iovec usage
f48e1c205af3 odhcdp: use a more suitable clock
7e78caac4eae dhcpv6: change dhcpv6 message type check in relay
288abd9c4046 dhcpv6: move dhcpv6 message type check for early exit
d504458ef515 odhcpd: add a simple build script
4ee309a54011 github: improve CI
ff3a241ccc98 odhcpd: shrink binary size by creating a logging function
e2ecf7ba6d72 odhcpd: support stderr logging
5de3b0d5b509 odhcpd: add log helpers
398d03a1a236 config: cap dhcpv6_pd_min_len to max instead of only logging error
4f54738d3ae7 config: clamp dhcpv6_hostid_len instead of only logging an error
465f19c9c2e3 config: clamp ra_mtu into 1280-65535 range
434b06133997 config: cap ra_retranstime and warn instead of only logging an error
e5f58a90a147 config: cap ra_hoplimit to maximum and warn instead of logging an error
208eb10307c1 config: cap ra_reachabletime to RFC maximum instead of logging error
93449f1513b4 config: drop double size lease times; they are all UINT32_MAX;
439c0ceab131 router: redefine ra_mininterval and ra_maxinterval as uint32_t
84b4dfe81363 config: clamp ra_mininterval, ra_maxinterval, ra_lifetime at load time
aa4f26232e05 router: refactor calc_ra_lifetime; redefine ra_lifetime as uint32_t
6ece28ffd475 config: do MaxRtrAdvInterval init at (ra_maxinterval) init time
dc03e02d973e router: Apply updated values from RFC9096 (updates RFC4861) to RA/ND
cc7766c12abe router: Apply updated values from RFC8319 (updates RFC4861) to RA/ND
964da13e758c config: refactor parse_leasetime() - branch amount remains same
9646c749467b github: fix CMAKE_SYSTEM_PROCESSOR copy&paste
288206c9a2ed github: add CI build
30780debd691 odhcpd: fix a compilation error
e0b2c3cf9476 odhcpd: allow assignments to be reassigned
01e5e311b0db odhcpd: support multiple per-client DUIDs
aebc647a6b7b odhcpd: support assignments on the basis of IAID
cc3ec9c20c61 odhcpd: support IAIDs for static DHCPv6 leases
e42c62725942 odhcpd: break up complex matching logic
e1123906a4bc odhcpd: document the ubus interface
c69200195263 dhcpv4: generate dbus events on lease expiry
dd7a2d474d0d dhcpv4: fix ubus events
22481d848e0d odhcpd: remove mac_len argument to ubus_bcast_dhcp_event()
d31d64efd56c odhcpd: fix ubus support flag in help msg
9bc1b4e26e10 odhcpd: reduce use of WITH_UBUS defines in code
d402cdae4316 ndp: fix macOS IPv6 compatibility by using link-local source addresses
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
77e1ae21e67f odhcp6c: set server address from Information-request reply
e24ac1cf8c27 dhcpv6: use a per-interface IAID for IA_NA requests
053e6c4b3863 github: improve CI
b65ff293a969 dhcpv6: Check status code for IA_ADDR operations
3c7e425169e1 dhcpv6: Add error checking to handle renew failure for IA_PD operations
8de25373a860 dhcpv6: dhcpv6_parse_ia refactor to switch case
ca3cd525f447 odhcp6c: fix deamon raw buffer inc
d7afeea2b965 dhcpv6c: fix illegal DHCPV6_OPT_FQDN
70f7467db301 script: don't ignore RA with zero router lifetime
6ca1552cb3fe odhcp6c: sync and accumulate RA & DHCPv6 events as fast as possible
29b58cfb4711 odhcp6c: update cmake file
ee6d4a82bbeb github: add CI build
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
This board is also as known as E-Life ETR631-T/ETR635-U.
Hardware specification:
SoC: MediaTek MT7981B 2x A53
Flash: 128 MB SPI-NAND
RAM: 256MB DDR3
Ethernet: 4x 10/100/1000 Mbps
Switch: MediaTek MT7531AE
WiFi: MediaTek MT7976C
Button: Reset, Mesh
Power: DC 12V 1A
Gain telnet access:
1. Login into web interface, and download the configuration.
2. Uncompress the configuration:
* Enter fakeroot if you are not login as root.
tar -zxf <filename>.tar.gz
3. Edit 'etc/passwd', remove root password: 'root::1:0:99999:7:::'.
4. Edit 'etc/rc.local', insert telnetd command before 'exit 0':
( sleep 3s; telnetd; ) &
5. Repack the configuration:
tar -zcf backup.tar.gz etc/
6. Upload new configuration via web interface, now you can connect to
KOMI A31 via telnet.
Flash instructions:
1. Connect to KOMI A31, backup everything, especially 'Factory' part.
2. Write new BL2:
mtd write openwrt-mediatek-filogic-konka_komi-a31-preloader.bin BL2
3. Write new FIP:
mtd write openwrt-mediatek-filogic-konka_komi-a31-bl31-uboot.fip FIP
4. Set static IP on your PC:
IP 192.168.1.254/24, GW 192.168.1.1
5. Serve OpenWrt initramfs image using TFTP server.
6. Cut off the power and re-engage, wait for TFTP recovery to complete.
7. After OpenWrt has booted, perform sysupgrade.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/20357
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add IPQ Wifi entry for ath79 TP-Link Archer C60 v2.
Signed-off-by: Christoph Krapp <achterin@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20496
Signed-off-by: Robert Marko <robimarko@gmail.com>
Whenever the first bss is removed, any pending scan still keeps a reference
to it. Cancel it in order to prevent use-after-free bugs.
Reported-by: Chad Monroe <chad.monroe@adtran.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
df2f5c9a30f8 veth: delete device before creation to handle stale state
b6d371f30770 system-linux: handle RTM_DELLINK events for device state tracking
777f5942fa7d system-linux: only parse device status for AF_UNSPEC link messages
Signed-off-by: Felix Fietkau <nbd@nbd.name>
