mirror/u-boot-2016
1
0
Fork 0
mirror of https://git.codelinaro.org/clo/qsdk/oss/boot/u-boot-2016.git synced 2025-12-10 07:44:53 +01:00
Code Issues Projects Releases Packages Wiki Activity Actions
u-boot-2016/drivers/mtd/nand/qpic_nand.c
Hariharan K 2a156d089e drivers: mtd: nand: Updating part MX35UF2GE4AD 
The MX35UF2GE4AD nand part has support for 8-bit ECC,
2Gb flash density and 128 bytes of OOB. Updating the
correct info in the nand id table.

Change-Id: I21f1bd0a897b92694040dc5908580c80a4b003da
Signed-off-by: Hariharan K <quic_harihk@quicinc.com>
2024-05-22 21:12:07 -07:00

5354 lines
147 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
* Copyright (c) 2008, Google Inc.
* All rights reserved.
* Copyright (c) 2009-2018, The Linux Foundation. All rights reserved.
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <common.h>
#include <malloc.h>
#include <asm/io.h>
#include <asm/errno.h>
#include <nand.h>
#include <linux/mtd/nand.h>
#include <asm/arch-qca-common/bam.h>
#include <asm/arch-qca-common/qpic_nand.h>
#include <asm/arch-qca-common/gpio.h>
#include <fdtdec.h>
#include <dm.h>
DECLARE_GLOBAL_DATA_PTR;
#ifdef READ_ONFI_PAGE_PARA
struct nand_onfi_para_page onfi_para;
#endif
typedef unsigned long addr_t;
static uint32_t hw_ver;
unsigned int qpic_training_offset = 0xBAD0FF5E;
#ifdef CONFIG_QSPI_LAYOUT_SWITCH
enum qpic_nand_layout {
QPIC_NAND_LAYOUT_SBL,
QPIC_NAND_LAYOUT_LINUX,
QPIC_NAND_LAYOUT_MAX
};
enum qpic_nand_layout qpic_layout = QPIC_NAND_LAYOUT_LINUX;
#endif
#ifdef CONFIG_QPIC_SERIAL
static struct qpic_serial_nand_params qpic_serial_nand_tbl[] = {
{
.id = { 0xc8, 0xc1 },
.page_size = 2048,
.erase_blk_size = 0x00020000,
.pgs_per_blk = 64,
.no_of_blocks = 1024,
.spare_size = 128,
.density = 0x08000000,
.otp_region = 0x2000,
.no_of_addr_cycle = 0x3,
.num_bits_ecc_correctability = 8,
.timing_mode_support = 0,
.quad_mode = true,
.check_quad_config = true,
.name = "GD5F1GQ4RE9IG",
},
{
.id = { 0xc8, 0xc9 },
.page_size = 2048,
.erase_blk_size = 0x00020000,
.pgs_per_blk = 64,
.no_of_blocks = 1024,
.spare_size = 64,
.density = 0x08000000,
.otp_region = 0x2000,
.no_of_addr_cycle = 0x3,
.num_bits_ecc_correctability = 4,
.timing_mode_support = 0,
.quad_mode = true,
.check_quad_config = true,
.name = "GD5F1GQ4RE9IH",
},
{
.id = { 0xc8, 0x22 },
.page_size = 2048,
.erase_blk_size = 0x00020000,
.pgs_per_blk = 64,
.no_of_blocks = 2048,
.spare_size = 64,
.density = 0x10000000,
.otp_region = 0x2000,
.no_of_addr_cycle = 0x3,
.num_bits_ecc_correctability = 4,
.timing_mode_support = 0,
.quad_mode = true,
.check_quad_config = true,
.name = "GD5F2GQ5REYIH",
},
{
.id = { 0xc8, 0x25 },
.page_size = 2048,
.erase_blk_size = 0x00020000,
.pgs_per_blk = 64,
.no_of_blocks = 4096,
.spare_size = 64,
.density = 0x20000000,
.otp_region = 0x2000,
.no_of_addr_cycle = 0x3,
.num_bits_ecc_correctability = 4,
.timing_mode_support = 0,
.quad_mode = true,
.check_quad_config = true,
.name = "GD5F4GQ6REYIHR",
},
{
.id = { 0x2c, 0x15 },
.page_size = 2048,
.erase_blk_size = 0x00020000,
.pgs_per_blk = 64,
.no_of_blocks = 1024,
.spare_size = 128,
.density = 0x08000000,
.otp_region = 0x5000,
.no_of_addr_cycle = 0x3,
.num_bits_ecc_correctability = 8,
.timing_mode_support = 0,
.quad_mode = true,
.check_quad_config = false,
.name = "MT29F1G01ABBFDWB-IT",
},
{
.id = { 0xef, 0xbc, 0x21 },
.page_size = 2048,
.erase_blk_size = 0x00020000,
.pgs_per_blk = 64,
.no_of_blocks = 1024,
.spare_size = 64,
.density = 0x08000000,
.otp_region = 0x5000,
.no_of_addr_cycle = 0x3,
.num_bits_ecc_correctability = 4,
.timing_mode_support = 0,
.quad_mode = true,
.check_quad_config = true,
.name = "W25N01JW",
},
{
.id = { 0xc8, 0x11 },
.page_size = 2048,
.erase_blk_size = 0x00020000,
.pgs_per_blk = 64,
.no_of_blocks = 1024,
.spare_size = 64,
.density = 0x08000000,
.otp_region = 0x2000,
.no_of_addr_cycle = 0x3,
.num_bits_ecc_correctability = 4,
.timing_mode_support = 0,
.quad_mode = true,
.check_quad_config = false,
.name = "F50D1G41LB(2M)",
},
{
.id = { 0xc8, 0x41 },
.page_size = 2048,
.erase_blk_size = 0x00020000,
.pgs_per_blk = 64,
.no_of_blocks = 1024,
.spare_size = 128,
.density = 0x08000000,
.otp_region = 0x2000,
.no_of_addr_cycle = 0x3,
.num_bits_ecc_correctability = 8,
.timing_mode_support = 0,
.quad_mode = true,
.check_quad_config = true,
.name = "GD5F1GQ5REYIG",
},
{
.id = { 0xc8, 0x81 },
.page_size = 2048,
.erase_blk_size = 0x00020000,
.pgs_per_blk = 64,
.no_of_blocks = 1024,
.spare_size = 128,
.density = 0x08000000,
.otp_region = 0x5000,
.no_of_addr_cycle = 0x3,
.num_bits_ecc_correctability = 8,
.timing_mode_support = 0,
.quad_mode = true,
.check_quad_config = true,
.name = "GD5F1GM7REYIG",
},
{
.id = { 0xc8, 0x82 },
.page_size = 2048,
.erase_blk_size = 0x00020000,
.pgs_per_blk = 64,
.no_of_blocks = 2048,
.spare_size = 128,
.density = 0x10000000,
.otp_region = 0x5000,
.no_of_addr_cycle = 0x3,
.num_bits_ecc_correctability = 8,
.timing_mode_support = 0,
.quad_mode = true,
.check_quad_config = true,
.name = "GD5F2GM7REYIG",
},
{
.id = { 0xc8, 0x21 },
.page_size = 2048,
.erase_blk_size = 0x00020000,
.pgs_per_blk = 64,
.no_of_blocks = 1024,
.spare_size = 64,
.density = 0x08000000,
.otp_region = 0x2000,
.no_of_addr_cycle = 0x3,
.num_bits_ecc_correctability = 4,
.timing_mode_support = 0,
.quad_mode = true,
.check_quad_config = true,
.name = "GD5F1GQ5REYIH",
},
{
.id = { 0xef, 0xbf, 0x22 },
.page_size = 2048,
.erase_blk_size = 0x00020000,
.pgs_per_blk = 64,
.no_of_blocks = 2048,
.spare_size = 64,
.density = 0x10000000,
.otp_region = 0x2000,
.no_of_addr_cycle = 0x3,
.num_bits_ecc_correctability = 4,
.timing_mode_support = 0,
.quad_mode = true,
.check_quad_config = true,
.name = "W25N02JWZEIF",
},
{
.id = { 0xef, 0xba, 0x21 },
.page_size = 2048,
.erase_blk_size = 0x00020000,
.pgs_per_blk = 64,
.no_of_blocks = 1024,
.spare_size = 64,
.density = 0x8000000,
.otp_region = 0x2000,
.no_of_addr_cycle = 0x3,
.num_bits_ecc_correctability = 4,
.timing_mode_support = 0,
.quad_mode = true,
.check_quad_config = false,
.name = "W25N01GWZEIG",
},
{
.id = { 0xef, 0xba, 0x20 },
.page_size = 2048,
.erase_blk_size = 0x00020000,
.pgs_per_blk = 64,
.no_of_blocks = 512,
.spare_size = 64,
.density = 0x4000000,
.otp_region = 0x2000,
.no_of_addr_cycle = 0x3,
.num_bits_ecc_correctability = 4,
.timing_mode_support = 0,
.quad_mode = true,
.check_quad_config = false,
.name = "W25N512GW",
},
{
.id = { 0xef, 0xba, 0x22 },
.page_size = 2048,
.erase_blk_size = 0x00020000,
.pgs_per_blk = 64,
.no_of_blocks = 2048,
.spare_size = 128,
.density = 0x10000000,
.otp_region = 0x2000,
.no_of_addr_cycle = 0x3,
.num_bits_ecc_correctability = 8,
.timing_mode_support = 0,
.quad_mode = true,
.check_quad_config = false,
.name = "W25N02KWZEIR",
},
{
.id = { 0xef, 0xba, 0x23 },
.page_size = 2048,
.erase_blk_size = 0x00020000,
.pgs_per_blk = 64,
.no_of_blocks = 4096,
.spare_size = 128,
.density = 0x20000000,
.otp_region = 0x2000,
.no_of_addr_cycle = 0x3,
.num_bits_ecc_correctability = 8,
.timing_mode_support = 0,
.quad_mode = true,
.check_quad_config = false,
.name = "W25N04KWZEIR",
},
{
.id = { 0xc2, 0x92 },
.page_size = 2048,
.erase_blk_size = 0x00020000,
.pgs_per_blk = 64,
.no_of_blocks = 1024,
.spare_size = 64,
.density = 0x08000000,
.otp_region = 0x2000,
.no_of_addr_cycle = 0x3,
.num_bits_ecc_correctability = 4,
.timing_mode_support = 0,
.quad_mode = true,
.check_quad_config = true,
.name = "MX35UF1GE4AC",
},
{
.id = { 0xc8, 0x51 },
.page_size = 2048,
.erase_blk_size = 0x00020000,
.pgs_per_blk = 64,
.no_of_blocks = 2048,
.spare_size = 128,
.density = 0x10000000,
.otp_region = 0xF000,
.no_of_addr_cycle = 0x3,
.num_bits_ecc_correctability = 8,
.timing_mode_support = 0,
.quad_mode = true,
.check_quad_config = true,
.name = "F50D2G41KA-83YIG2V",
},
{
.id = { 0xe5, 0x21 },
.page_size = 2048,
.erase_blk_size = 0x00020000,
.pgs_per_blk = 64,
.no_of_blocks = 1024,
.spare_size = 64,
.density = 0x08000000,
.otp_region = 0xF000,
.no_of_addr_cycle = 0x3,
.num_bits_ecc_correctability = 4,
.timing_mode_support = 0,
.quad_mode = true,
.check_quad_config = true,
.name = "DS35M1GA",
},
{
.id = { 0xc8, 0x42 },
.page_size = 2048,
.erase_blk_size = 0x00020000,
.pgs_per_blk = 64,
.no_of_blocks = 2048,
.spare_size = 128,
.density = 0x10000000,
.otp_region = 0x2000,
.no_of_addr_cycle = 0x3,
.num_bits_ecc_correctability = 8,
.timing_mode_support = 0,
.quad_mode = true,
.check_quad_config = true,
.name = "GD5F2GQ5REYIG",
},
{
.id = { 0xc2, 0xa6 },
.page_size = 2048,
.erase_blk_size = 0x00020000,
.pgs_per_blk = 64,
.no_of_blocks = 2048,
.spare_size = 128,
.density = 0x10000000,
.otp_region = 0x2000,
.no_of_addr_cycle = 0x3,
.num_bits_ecc_correctability = 8,
.timing_mode_support = 0,
.quad_mode = true,
.check_quad_config = true,
.name = "MX35UF2GE4AD",
},
{
.id = { 0xc2, 0xb7 },
.page_size = 4096,
.erase_blk_size = 0x00040000,
.pgs_per_blk = 64,
.no_of_blocks = 2048,
.spare_size = 256,
.density = 0x20000000,
.otp_region = 0x2000,
.no_of_addr_cycle = 0x3,
.num_bits_ecc_correctability = 8,
.timing_mode_support = 0,
.quad_mode = true,
.check_quad_config = true,
.name = "MX35UF4GE4AD-Z4I",
},
{
.id = { 0xc2, 0x94 },
.page_size = 2048,
.erase_blk_size = 0x00020000,
.pgs_per_blk = 64,
.no_of_blocks = 1024,
.spare_size = 128,
.density = 0x08000000,
.otp_region = 0x2000,
.no_of_addr_cycle = 0x3,
.num_bits_ecc_correctability = 8,
.timing_mode_support = 0,
.quad_mode = true,
.check_quad_config = true,
.name = "MX35UF1G24AD",
},
};
struct qpic_serial_nand_params *serial_params;
#define MICRON_DEVICE_ID 0x152c152c
#define WINBOND_MFR_ID 0xef
#define CMD3_MASK 0xfff0ffff
/*
* An array holding the fixed pattern to compare with
* training pattern.
*/
static const unsigned int training_block_64[] = {
0x0F0F0F0F, 0x0F0F0F0F, 0x0F0F0F0F, 0x0F0F0F0F,
0x0F0F0F0F, 0x0F0F0F0F, 0x0F0F0F0F, 0x0F0F0F0F,
0x0F0F0F0F, 0x0F0F0F0F, 0x0F0F0F0F, 0x0F0F0F0F,
0x0F0F0F0F, 0x0F0F0F0F, 0x0F0F0F0F, 0x0F0F0F0F,
};
#define TRAINING_PART_OFFSET 0x3c00000
#define MAXIMUM_ALLOCATED_TRAINING_BLOCK 4
#define TOTAL_NUM_PHASE 7
#endif
struct cmd_element ce_array[100]
__attribute__ ((aligned(CONFIG_SYS_CACHELINE_SIZE)));
struct cmd_element ce_read_array[20]
__attribute__ ((aligned(CONFIG_SYS_CACHELINE_SIZE)));
static struct qpic_nand_dev qpic_nand_dev;
struct bam_desc qpic_cmd_desc_fifo[QPIC_BAM_CMD_FIFO_SIZE]
__attribute__ ((aligned(CONFIG_SYS_CACHELINE_SIZE)));
struct bam_desc qpic_data_desc_fifo[QPIC_BAM_DATA_FIFO_SIZE]
__attribute__ ((aligned(CONFIG_SYS_CACHELINE_SIZE)));
struct bam_desc qpic_status_desc_fifo[QPIC_BAM_STATUS_FIFO_SIZE]
__attribute__ ((aligned(CONFIG_SYS_CACHELINE_SIZE)));
static struct bam_instance bam;
struct nand_ecclayout fake_ecc_layout;
uint32_t ret_val __attribute__ ((aligned(CONFIG_SYS_CACHELINE_SIZE)));
uint8_t read_bytes[4]
__attribute__ ((aligned(CONFIG_SYS_CACHELINE_SIZE)));
uint32_t flash_sts[QPIC_NAND_MAX_CWS_IN_PAGE]
__attribute__ ((aligned(CONFIG_SYS_CACHELINE_SIZE)));
uint32_t buffer_sts[QPIC_NAND_MAX_CWS_IN_PAGE]
__attribute__ ((aligned(CONFIG_SYS_CACHELINE_SIZE)));
uint32_t status_write[QPIC_NAND_MAX_CWS_IN_PAGE]
__attribute__ ((aligned(CONFIG_SYS_CACHELINE_SIZE)));
static int
qpic_nand_read_page(struct mtd_info *mtd, uint32_t page,
enum nand_cfg_value cfg_mode, struct mtd_oob_ops *ops);
static const struct udevice_id qpic_ver_ids[] = {
{ .compatible = "qcom,qpic-nand.1.4.20", .data = QCA_QPIC_V1_4_20 },
{ .compatible = "qcom,qpic-nand.1.5.20", .data = QCA_QPIC_V1_5_20 },
{ .compatible = "qcom,qpic-nand-v2.1.1", .data = QCA_QPIC_V2_1_1},
{ },
};
static uint32_t
qpic_onfi_mode_to_xfer_steps[QPIC_MAX_ONFI_MODES][QPIC_NUM_XFER_STEPS] = {
#ifdef CONFIG_QPIC_SERIAL
/* Mode 0 */
{
0x00e00080, 0x49f04998, 0x8de08d80, 0xc000c000,
0xc000c000, 0xc000c000, 0xc000c000,
},
#else
{
0x04e00480, 0x59f05998, 0x89e08980, 0xd000d000,
0xc000c000, 0xc000c000, 0xc000c000,
},
#endif
/* Mode 1 */
{
0x00e00080, 0x49f04d99, 0x85e08580, 0xd000d000,
0xc000c000, 0xc000c000, 0xc000c000,
},
/* Mode 2 */
{
0x00e00080, 0x45f0459a, 0x85e08580, 0xd000d000,
0xc000c000, 0xc000c000, 0xc000c000,
},
/* Mode 3 */
{
0x00e00080, 0x45f04599, 0x81e08180, 0xd000d000,
0xc000c000, 0xc000c000, 0xc000c000,
},
};
static void
qpic_nand_wait_for_cmd_exec(uint32_t num_desc)
{
/* Create a read/write event to notify the periperal of the added desc. */
bam_sys_gen_event(&bam, CMD_PIPE_INDEX, num_desc);
/* Wait for the descriptors to be processed */
bam_wait_for_interrupt(&bam, CMD_PIPE_INDEX, P_PRCSD_DESC_EN_MASK);
/* Read offset update for the circular FIFO */
bam_read_offset_update(&bam, CMD_PIPE_INDEX);
}
static void
qpic_nand_wait_for_data(uint32_t pipe_num)
{
/* Wait for the descriptors to be processed */
bam_wait_for_interrupt(&bam, pipe_num, P_PRCSD_DESC_EN_MASK);
/* Read offset update for the circular FIFO */
bam_read_offset_update(&bam, pipe_num);
}
static uint32_t
qpic_nand_read_reg(uint32_t reg_addr,
uint8_t flags)
{
struct cmd_element *cmd_list_read_ptr = ce_read_array;
bam_add_cmd_element(cmd_list_read_ptr, reg_addr,
(uint32_t)((addr_t)&ret_val), CE_READ_TYPE);
/* Enqueue the desc for the above command */
bam_add_one_desc(&bam,
CMD_PIPE_INDEX,
(unsigned char*)((addr_t)cmd_list_read_ptr),
BAM_CE_SIZE,
BAM_DESC_CMD_FLAG| BAM_DESC_INT_FLAG | flags);
qpic_nand_wait_for_cmd_exec(1);
#if !defined(CONFIG_SYS_DCACHE_OFF)
flush_dcache_range((unsigned long)&ret_val,
(unsigned long)&ret_val + sizeof(ret_val));
#endif
return ret_val;
}
#ifdef CONFIG_PAGE_SCOPE_MULTI_PAGE_READ
static void reset_multi_page_cmd_reg(struct cmd_element *cmd_list_ptr, uint8_t flags)
{
bam_add_cmd_element(cmd_list_ptr, NAND_MULTI_PAGE_CMD, (uint32_t)0,
CE_WRITE_TYPE);
/* Enqueue the desc for the above command */
bam_add_one_desc(&bam, CMD_PIPE_INDEX, (unsigned char*)cmd_list_ptr,
BAM_CE_SIZE, BAM_DESC_CMD_FLAG | BAM_DESC_INT_FLAG);
qpic_nand_wait_for_cmd_exec(1);
}
static void reset_addr_reg(struct cmd_element *cmd_list_ptr, uint8_t flags)
{
bam_add_cmd_element(cmd_list_ptr, NAND_ADDR0, (uint32_t)0,
CE_WRITE_TYPE);
/* Enqueue the desc for the above command */
bam_add_one_desc(&bam, CMD_PIPE_INDEX, (unsigned char*)cmd_list_ptr,
BAM_CE_SIZE, BAM_DESC_CMD_FLAG | BAM_DESC_INT_FLAG);
qpic_nand_wait_for_cmd_exec(1);
}
#endif
/* Assume the BAM is in a locked state. */
void
qpic_nand_erased_status_reset(struct cmd_element *cmd_list_ptr, uint8_t flags)
{
uint32_t val = 0;
/* Reset the Erased Codeword/Page detection controller. */
val = NAND_ERASED_CW_DETECT_CFG_RESET_CTRL;
bam_add_cmd_element(cmd_list_ptr, NAND_ERASED_CW_DETECT_CFG, val,
CE_WRITE_TYPE);
/* Enqueue the desc for the above command */
bam_add_one_desc(&bam,
CMD_PIPE_INDEX,
(unsigned char*)cmd_list_ptr,
BAM_CE_SIZE,
BAM_DESC_CMD_FLAG | BAM_DESC_INT_FLAG | flags);
qpic_nand_wait_for_cmd_exec(1);
/* Enable the Erased Codeword/Page detection
* controller to check the data as it arrives.
* Also disable ECC reporting for an erased CW.
*/
val = NAND_ERASED_CW_DETECT_CFG_ACTIVATE_CTRL |
NAND_ERASED_CW_DETECT_ERASED_CW_ECC_MASK;
bam_add_cmd_element(cmd_list_ptr, NAND_ERASED_CW_DETECT_CFG, val,
CE_WRITE_TYPE);
/* Enqueue the desc for the above command */
bam_add_one_desc(&bam,
CMD_PIPE_INDEX,
(unsigned char*)cmd_list_ptr,
BAM_CE_SIZE,
BAM_DESC_CMD_FLAG | BAM_DESC_INT_FLAG |
BAM_DESC_UNLOCK_FLAG);
qpic_nand_wait_for_cmd_exec(1);
}
static int
qpic_nand_check_read_status(struct mtd_info *mtd, struct read_stats *stats)
{
uint32_t status = stats->flash_sts;
/* Check for errors */
if (!(status & NAND_FLASH_ERR)) {
uint32_t corrected = stats->buffer_sts & NUM_ERRORS_MASK;
mtd->ecc_stats.corrected += corrected;
return corrected;
}
if (status & NAND_FLASH_MPU_ERR)
return -EPERM;
if (status & NAND_FLASH_TIMEOUT_ERR)
return -ETIMEDOUT;
if (stats->buffer_sts & NAND_BUFFER_UNCORRECTABLE) {
/* Check if this is an ECC error on an erased page. */
if ((stats->erased_cw_sts & NAND_CW_ERASED) != NAND_CW_ERASED)
return -EBADMSG;
return 0;
}
return -EIO;
}
static int
qpic_nand_check_status(struct mtd_info *mtd, uint32_t status)
{
/* Check for errors */
if (status & NAND_FLASH_ERR) {
printf("Nand Flash error. Status = %d\n", status);
if (status & NAND_FLASH_MPU_ERR)
return -EPERM;
if (status & NAND_FLASH_TIMEOUT_ERR)
return -ETIMEDOUT;
return -EIO;
}
return 0;
}
static uint32_t
qpic_nand_fetch_id(struct mtd_info *mtd)
{
struct cmd_element *cmd_list_ptr = ce_array;
struct cmd_element *cmd_list_ptr_start = ce_array;
struct qpic_nand_dev *dev = MTD_QPIC_NAND_DEV(mtd);
int num_desc = 0;
uint32_t status;
uint32_t id;
uint32_t flash_cmd = NAND_CMD_FETCH_ID;
uint32_t exec_cmd = 1;
int nand_ret = NANDC_RESULT_SUCCESS;
uint32_t vld = NAND_CMD_VALID_BASE;
uint32_t cmd_vld = NAND_DEV_CMD_VLD_V1_4_20;
#ifdef CONFIG_QPIC_SERIAL
flash_cmd |= QPIC_SPI_WP_SET | QPIC_SPI_HOLD_SET |
QPIC_SPI_TRANSFER_MODE_X1;
vld = FLASH_DEV_CMD_VLD;
#endif
/* Issue the Fetch id command to the NANDc */
bam_add_cmd_element(cmd_list_ptr, NAND_FLASH_CMD, (uint32_t)flash_cmd,
CE_WRITE_TYPE);
cmd_list_ptr++;
if (hw_ver == QCA_QPIC_V1_5_20 || hw_ver == QCA_QPIC_V2_1_1)
cmd_vld = NAND_DEV_CMD_VLD_V1_5_20;
bam_add_cmd_element(cmd_list_ptr, cmd_vld, (uint32_t)vld,
CE_WRITE_TYPE);
cmd_list_ptr++;
/* Execute the cmd */
bam_add_cmd_element(cmd_list_ptr, NAND_EXEC_CMD, (uint32_t)exec_cmd,
CE_WRITE_TYPE);
cmd_list_ptr++;
/* Prepare the cmd desc for the above commands */
bam_add_one_desc(&bam,
CMD_PIPE_INDEX,
(unsigned char*)cmd_list_ptr_start,
((uint32_t)cmd_list_ptr - (uint32_t)cmd_list_ptr_start),
BAM_DESC_LOCK_FLAG | BAM_DESC_INT_FLAG |
BAM_DESC_NWD_FLAG | BAM_DESC_CMD_FLAG);
/* Keep track of the number of desc added. */
num_desc++;
qpic_nand_wait_for_cmd_exec(num_desc);
/* Read the status register */
status = qpic_nand_read_reg(NAND_FLASH_STATUS, 0);
/* Check for errors */
nand_ret = qpic_nand_check_status(mtd, status);
if (nand_ret) {
printf("Read ID cmd status failed\n");
goto qpic_nand_fetch_id_err;
}
/* Read the id */
id = qpic_nand_read_reg(NAND_READ_ID, BAM_DESC_UNLOCK_FLAG);
dev->id = id;
dev->vendor = id & 0xff;
dev->device = (id >> 8) & 0xff;
dev->dev_cfg = (id >> 24) & 0xFF;
dev->widebus = 0;
dev->widebus &= (id >> 24) & 0xFF;
dev->widebus = dev->widebus? 1: 0;
printf("ID = %x\n", dev->id);
printf("Vendor = %x\n", dev->vendor);
printf("Device = %x\n", dev->device);
qpic_nand_fetch_id_err:
return nand_ret;
}
static int
qpic_bam_init(struct qpic_nand_init_config *config)
{
uint32_t bam_ret = NANDC_RESULT_SUCCESS;
bam.base = config->bam_base;
/* Set Read pipe params. */
bam.pipe[DATA_PRODUCER_PIPE_INDEX].pipe_num = config->pipes.read_pipe;
/* System consumer */
bam.pipe[DATA_PRODUCER_PIPE_INDEX].trans_type = BAM2SYS;
bam.pipe[DATA_PRODUCER_PIPE_INDEX].fifo.size = QPIC_BAM_DATA_FIFO_SIZE;
bam.pipe[DATA_PRODUCER_PIPE_INDEX].fifo.head = qpic_data_desc_fifo;
bam.pipe[DATA_PRODUCER_PIPE_INDEX].lock_grp = config->pipes.read_pipe_grp;
/* Set Write pipe params. */
bam.pipe[DATA_CONSUMER_PIPE_INDEX].pipe_num = config->pipes.write_pipe;
/* System producer */
bam.pipe[DATA_CONSUMER_PIPE_INDEX].trans_type = SYS2BAM;
bam.pipe[DATA_CONSUMER_PIPE_INDEX].fifo.size = QPIC_BAM_DATA_FIFO_SIZE;
bam.pipe[DATA_CONSUMER_PIPE_INDEX].fifo.head = qpic_data_desc_fifo;
bam.pipe[DATA_CONSUMER_PIPE_INDEX].lock_grp = config->pipes.write_pipe_grp;
/* Set Cmd pipe params. */
bam.pipe[CMD_PIPE_INDEX].pipe_num = config->pipes.cmd_pipe;
/* System consumer */
bam.pipe[CMD_PIPE_INDEX].trans_type = SYS2BAM;
bam.pipe[CMD_PIPE_INDEX].fifo.size = QPIC_BAM_CMD_FIFO_SIZE;
bam.pipe[CMD_PIPE_INDEX].fifo.head = qpic_cmd_desc_fifo;
bam.pipe[CMD_PIPE_INDEX].lock_grp = config->pipes.cmd_pipe_grp;
#ifdef CONFIG_PAGE_SCOPE_MULTI_PAGE_READ
/* Set Status pipe params. */
bam.pipe[BAM_STATUS_PIPE_INDEX].pipe_num = config->pipes.status_pipe;
/* System consumer */
bam.pipe[BAM_STATUS_PIPE_INDEX].trans_type = BAM2SYS;
bam.pipe[BAM_STATUS_PIPE_INDEX].fifo.size = QPIC_BAM_STATUS_FIFO_SIZE;
bam.pipe[BAM_STATUS_PIPE_INDEX].fifo.head = qpic_status_desc_fifo;
bam.pipe[BAM_STATUS_PIPE_INDEX].lock_grp = config->pipes.status_pipe_grp;
#endif
/* Programs the threshold for BAM transfer
* When this threshold is reached, BAM signals the peripheral via the
* pipe_bytes_available interface.
* The peripheral is signalled with this notification in the following cases:
* a. It has accumulated all the descriptors.
* b. It has accumulated more than threshold bytes.
* c. It has reached EOT (End Of Transfer).
* Note: this value needs to be set by the h/w folks and is specific
* for each peripheral.
*/
bam.threshold = 32;
/* Set the EE. */
bam.ee = config->ee;
/* Set the max desc length for this BAM. */
bam.max_desc_len = config->max_desc_len;
/* BAM Init. */
bam_init(&bam);
/* Initialize BAM QPIC read pipe */
bam_sys_pipe_init(&bam, DATA_PRODUCER_PIPE_INDEX);
/* Init read fifo */
bam_ret = bam_pipe_fifo_init(&bam,
bam.pipe[DATA_PRODUCER_PIPE_INDEX].pipe_num);
if (bam_ret) {
printf("QPIC:NANDc BAM Read FIFO init error\n");
bam_ret = NANDC_RESULT_FAILURE;
goto qpic_nand_bam_init_error;
}
/* Initialize BAM QPIC write pipe */
bam_sys_pipe_init(&bam, DATA_CONSUMER_PIPE_INDEX);
/* Init write fifo. Use the same fifo as read fifo. */
bam_ret = bam_pipe_fifo_init(&bam,
bam.pipe[DATA_CONSUMER_PIPE_INDEX].pipe_num);
if (bam_ret) {
printf("QPIC: NANDc: BAM Write FIFO init error\n");
bam_ret = NANDC_RESULT_FAILURE;
goto qpic_nand_bam_init_error;
}
/* Initialize BAM QPIC cmd pipe */
bam_sys_pipe_init(&bam, CMD_PIPE_INDEX);
/* Init cmd fifo */
bam_ret = bam_pipe_fifo_init(&bam, bam.pipe[CMD_PIPE_INDEX].pipe_num);
if (bam_ret) {
printf("QPIC:NANDc BAM CMD FIFO init error\n");
bam_ret = NANDC_RESULT_FAILURE;
goto qpic_nand_bam_init_error;
}
#ifdef CONFIG_PAGE_SCOPE_MULTI_PAGE_READ
/* Initialize BAM QPIC status pipe */
bam_sys_pipe_init(&bam, BAM_STATUS_PIPE_INDEX);
/* Init status fifo */
bam_ret = bam_pipe_fifo_init(&bam, bam.pipe[BAM_STATUS_PIPE_INDEX].pipe_num);
if (bam_ret) {
printf("QPIC:NANDc BAM STATUS FIFO init error\n");
bam_ret = NANDC_RESULT_FAILURE;
goto qpic_nand_bam_init_error;
}
#endif
/*
* Once BAM_MODE_EN bit is set then QPIC_NAND_CTRL register
* should be written with BAM instead of writel.
* Check if BAM_MODE_EN is already set by bootloader and write only
* if this bit is not set.
*/
if (!(readl(QPIC_NAND_CTRL) & BAM_MODE_EN)) {
#ifdef CONFIG_QPIC_SERIAL
writel(BAM_MODE_EN | NANDC_READ_DELAY_COUNTER_VAL, QPIC_NAND_CTRL);
#else
writel(BAM_MODE_EN , QPIC_NAND_CTRL);
#endif
}
qpic_nand_bam_init_error:
return bam_ret;
}
/* Adds command elements for addr and cfg register writes.
* cfg: Defines the configuration for the flash cmd.
* start: Address where the command elements are added.
*
* Returns the address where the next cmd element can be added.
*/
struct cmd_element*
qpic_nand_add_addr_n_cfg_ce(struct cfg_params *cfg,
struct cmd_element *start)
{
struct cmd_element *cmd_list_ptr = start;
bam_add_cmd_element(cmd_list_ptr, NAND_ADDR0, (uint32_t)cfg->addr0,
CE_WRITE_TYPE);
cmd_list_ptr++;
bam_add_cmd_element(cmd_list_ptr, NAND_ADDR1, (uint32_t)cfg->addr1,
CE_WRITE_TYPE);
cmd_list_ptr++;
bam_add_cmd_element(cmd_list_ptr, NAND_DEV0_CFG0, (uint32_t)cfg->cfg0,
CE_WRITE_TYPE);
cmd_list_ptr++;
bam_add_cmd_element(cmd_list_ptr, NAND_DEV0_CFG1, (uint32_t)cfg->cfg1,
CE_WRITE_TYPE);
cmd_list_ptr++;
return cmd_list_ptr;
}
static struct cmd_element*
qpic_nand_add_onfi_probe_ce(struct onfi_probe_params *params,
struct cmd_element *start)
{
struct cmd_element *cmd_list_ptr = start;
uint32_t cmd_vld = NAND_DEV_CMD_VLD_V1_4_20;
uint32_t dev_cmd1 = NAND_DEV_CMD1_V1_4_20;
cmd_list_ptr = qpic_nand_add_addr_n_cfg_ce(&params->cfg, cmd_list_ptr);
if (hw_ver == QCA_QPIC_V1_5_20) {
cmd_vld = NAND_DEV_CMD_VLD_V1_5_20;
dev_cmd1 = NAND_DEV_CMD1_V1_5_20;
}
bam_add_cmd_element(cmd_list_ptr, dev_cmd1,
(uint32_t)params->dev_cmd1, CE_WRITE_TYPE);
cmd_list_ptr++;
bam_add_cmd_element(cmd_list_ptr, cmd_vld,
(uint32_t)params->vld, CE_WRITE_TYPE);
cmd_list_ptr++;
bam_add_cmd_element(cmd_list_ptr, NAND_READ_LOCATION_n(0),
(uint32_t)params->cfg.addr_loc_0, CE_WRITE_TYPE);
cmd_list_ptr++;
bam_add_cmd_element(cmd_list_ptr, NAND_FLASH_CMD,
(uint32_t)params->cfg.cmd, CE_WRITE_TYPE);
cmd_list_ptr++;
bam_add_cmd_element(cmd_list_ptr, NAND_EXEC_CMD,
(uint32_t)params->cfg.exec, CE_WRITE_TYPE);
cmd_list_ptr++;
return cmd_list_ptr;
}
static int
onfi_probe_cmd_exec(struct mtd_info *mtd,
struct onfi_probe_params *params,
unsigned char* data_ptr,
int data_len)
{
struct cmd_element *cmd_list_ptr = ce_array;
struct cmd_element *cmd_list_ptr_start = ce_array;
int num_desc = 0;
uint32_t status = 0;
int nand_ret = NANDC_RESULT_SUCCESS;
uint8_t desc_flags = BAM_DESC_NWD_FLAG | BAM_DESC_CMD_FLAG
| BAM_DESC_LOCK_FLAG | BAM_DESC_INT_FLAG;
params->cfg.addr_loc_0 = 0;
params->cfg.addr_loc_0 |= NAND_RD_LOC_LAST_BIT(1);
params->cfg.addr_loc_0 |= NAND_RD_LOC_OFFSET(0);
params->cfg.addr_loc_0 |= NAND_RD_LOC_SIZE(data_len);
cmd_list_ptr = qpic_nand_add_onfi_probe_ce(params, cmd_list_ptr);
/* Enqueue the desc for the above commands */
bam_add_one_desc(&bam,
CMD_PIPE_INDEX,
(unsigned char*)cmd_list_ptr_start,
((addr_t)(uint32_t)cmd_list_ptr -
(uint32_t)cmd_list_ptr_start),
desc_flags);
cmd_list_ptr_start = cmd_list_ptr;
num_desc++;
/* Add Data desc */
bam_add_desc(&bam,
DATA_PRODUCER_PIPE_INDEX,
(unsigned char *)((addr_t)data_ptr),
data_len,
BAM_DESC_INT_FLAG);
/* Wait for the commands to be executed */
qpic_nand_wait_for_cmd_exec(num_desc);
/* Read buffer status and check for errors. */
status = qpic_nand_read_reg(NAND_FLASH_STATUS, 0);
nand_ret = qpic_nand_check_status(mtd, status);
if (nand_ret) {
goto onfi_probe_exec_err;
}
/* Wait for data to be available */
qpic_nand_wait_for_data(DATA_PRODUCER_PIPE_INDEX);
#if !defined(CONFIG_SYS_DCACHE_OFF)
flush_dcache_range((unsigned long)data_ptr,
(unsigned long)data_ptr + data_len);
#endif
/* Check for errors */
nand_ret = qpic_nand_check_status(mtd, status);
onfi_probe_exec_err:
return nand_ret;
}
/* TODO: check why both vld and cmd need to be written. */
void
qpic_nand_onfi_probe_cleanup(uint32_t vld, uint32_t dev_cmd1)
{
struct cmd_element *cmd_list_ptr = ce_array;
struct cmd_element *cmd_list_ptr_start = ce_array;
uint32_t cmd_vld = NAND_DEV_CMD_VLD_V1_4_20;
uint32_t dev_cmd1_reg = NAND_DEV_CMD1_V1_4_20;
if (hw_ver == QCA_QPIC_V1_5_20) {
cmd_vld = NAND_DEV_CMD_VLD_V1_5_20;
dev_cmd1_reg = NAND_DEV_CMD1_V1_5_20;
}
bam_add_cmd_element(cmd_list_ptr, dev_cmd1_reg, dev_cmd1,
CE_WRITE_TYPE);
cmd_list_ptr++;
bam_add_cmd_element(cmd_list_ptr, cmd_vld, vld,
CE_WRITE_TYPE);
cmd_list_ptr++;
/* Enqueue the desc for the above commands */
bam_add_one_desc(&bam,
CMD_PIPE_INDEX,
(unsigned char*)cmd_list_ptr_start,
((uint32_t)cmd_list_ptr -
(uint32_t)cmd_list_ptr_start),
BAM_DESC_UNLOCK_FLAG | BAM_DESC_CMD_FLAG|
BAM_DESC_INT_FLAG);
qpic_nand_wait_for_cmd_exec(1);
}
#ifndef CONFIG_QPIC_SERIAL
static void
qpic_config_timing_parameters(struct mtd_info *mtd)
{
struct qpic_nand_dev *dev = MTD_QPIC_NAND_DEV(mtd);
uint32_t xfer_start;
uint32_t i, timing_mode;
timing_mode = dev->timing_mode_support &
GENMASK(QPIC_MAX_ONFI_MODES - 1, 0);
/* If ONFI mode is not valid then use the default register values */
if (!timing_mode)
return;
timing_mode = fls(timing_mode) - 1;
if (hw_ver == QCA_QPIC_V1_5_20)
xfer_start = NAND_XFR_STEPS_V1_5_20;
else
xfer_start = NAND_XFR_STEP1;
for (i = 0; i < QPIC_NUM_XFER_STEPS; i++)
writel(qpic_onfi_mode_to_xfer_steps[timing_mode][i],
xfer_start + 4 * i);
}
#endif
#ifdef CONFIG_QPIC_SERIAL
static void qpic_serial_update_dev_params(struct mtd_info *mtd)
{
struct qpic_nand_dev *dev = MTD_QPIC_NAND_DEV(mtd);
uint32_t ecc_bits;
dev->page_size = serial_params->page_size;
#ifdef CONFIG_QSPI_LAYOUT_SWITCH
if (serial_params->page_size == 4096 && qpic_layout == QPIC_NAND_LAYOUT_SBL)
dev->page_size = 2048;
#endif
mtd->writesize = dev->page_size;
dev->block_size = serial_params->pgs_per_blk * (dev->page_size);
mtd->erasesize = dev->block_size;
dev->num_blocks = serial_params->no_of_blocks;
dev->widebus = 0x0;
dev->density = serial_params->no_of_blocks * (dev->block_size);
mtd->size = dev->density;
dev->spare_size = serial_params->spare_size;
mtd->oobsize = dev->spare_size;
ecc_bits = serial_params->num_bits_ecc_correctability;
dev->num_pages_per_blk = serial_params->pgs_per_blk;
dev->num_pages_per_blk_mask = serial_params->pgs_per_blk - 1;
dev->timing_mode_support = serial_params->timing_mode_support;
dev->quad_mode = serial_params->quad_mode;
dev->check_quad_config = serial_params->check_quad_config;
if (ecc_bits >= 8)
mtd->ecc_strength = 8;
else
mtd->ecc_strength = 4;
printf("Serial NAND device Manufacturer:%s\n",serial_params->name);
printf("Device Size:%d MiB, Page size:%d, Spare Size:%d, ECC:%d-bit\n",
(int)(dev->density >> 20), dev->page_size, mtd->oobsize, mtd->ecc_strength);
}
#endif
static int
qpic_nand_onfi_save_params(struct mtd_info *mtd,
struct onfi_param_page *param_page)
{
struct qpic_nand_dev *dev = MTD_QPIC_NAND_DEV(mtd);
int onfi_ret = NANDC_RESULT_SUCCESS;
uint32_t ecc_bits;
onfi_ret = qpic_nand_fetch_id(mtd);
if (onfi_ret) {
printf("Fetch ID cmd failed\n");
goto onfi_save_params_err;
}
dev->page_size = param_page->data_per_pg;
mtd->writesize = dev->page_size;
dev->block_size = param_page->pgs_per_blk * (dev->page_size);
mtd->erasesize = dev->block_size;
dev->num_blocks = param_page->blks_per_LUN;
dev->widebus = param_page->feature_supported & 0x1;
dev->density = param_page->blks_per_LUN * (dev->block_size);
mtd->size = dev->density * param_page->num_LUN;
dev->spare_size = param_page->spare_per_pg;
mtd->oobsize = dev->spare_size;
ecc_bits = param_page->num_bits_ecc_correctability;
dev->num_pages_per_blk = param_page->pgs_per_blk;
dev->num_pages_per_blk_mask = param_page->pgs_per_blk - 1;
dev->timing_mode_support = param_page->timing_mode_support;
if (ecc_bits >= 8)
mtd->ecc_strength = 8;
else
mtd->ecc_strength = 4;
onfi_save_params_err:
return onfi_ret;
}
static int
qpic_nand_save_config(struct mtd_info *mtd)
{
struct qpic_nand_dev *dev = MTD_QPIC_NAND_DEV(mtd);
struct nand_chip *chip = MTD_NAND_CHIP(mtd);
uint32_t qpic_oob_size;
uint32_t no_of_address_cycle = 5;
uint32_t disable_status_after_write = 0;
uint32_t recovery_cycle = 7;
uint32_t wr_rd_busy_gap = 2;
/* Save Configurations */
dev->cws_per_page = dev->page_size >> NAND_CW_DIV_RIGHT_SHIFT;
/* Verify that we have enough buffer to handle all the cws in a page. */
if (!(dev->cws_per_page <= QPIC_NAND_MAX_CWS_IN_PAGE)) {
printf("Not enough buffer to handle CW\n");
return -EINVAL;
}
/* Codeword Size = UD_SIZE_BYTES + ECC_PARITY_SIZE_BYTES
* + SPARE_SIZE_BYTES + Bad Block size
*/
if (mtd->ecc_strength == 8) {
dev->cw_size = NAND_CW_SIZE_8_BIT_ECC;
/* Use 8-bit ecc */
dev->ecc_bch_cfg |= (1 << NAND_DEV0_ECC_MODE_SHIFT);
if (dev->widebus) {
dev->ecc_bytes_hw = 14;
dev->spare_bytes = 0;
dev->bbm_size = 2;
} else {
dev->ecc_bytes_hw = 13;
dev->spare_bytes = 2;
dev->bbm_size = 1;
}
} else {
dev->cw_size = NAND_CW_SIZE_4_BIT_ECC;
if (dev->widebus) {
dev->ecc_bytes_hw = 8;
dev->spare_bytes = 2;
dev->bbm_size = 2;
} else {
dev->ecc_bytes_hw = 7;
dev->spare_bytes = 4;
dev->bbm_size = 1;
}
}
/* spare size bytes in each CW */
dev->cfg0 |= dev->spare_bytes << NAND_DEV0_CFG0_SPARE_SZ_BYTES_SHIFT;
/* parity bytes in each CW */
dev->ecc_bch_cfg |=
dev->ecc_bytes_hw << NAND_DEV0_ECC_PARITY_SZ_BYTES_SHIFT;
qpic_oob_size = dev->cw_size * dev->cws_per_page - mtd->writesize;
if (mtd->oobsize < qpic_oob_size) {
printf("qpic_nand: ecc data doesn't fit in available OOB area\n");
return -EINVAL;
}
if (mtd->oobsize > qpic_oob_size)
printf("qpic_nand: changing oobsize to %d from %d bytes\n",
qpic_oob_size, mtd->oobsize);
/* Make the device OOB size as QPIC supported OOB size. */
mtd->oobsize = qpic_oob_size;
mtd->oobavail = (DATA_BYTES_IN_IMG_PER_CW - USER_DATA_BYTES_PER_CW) *
dev->cws_per_page;
dev->oob_per_page = mtd->oobavail;
mtd->writebufsize = mtd->writesize;
/* BAD_BLOCK_BYTE_NUM = Page Size - (CW_PER_PAGE * Codeword Size) + 1
* Note: Set CW_PER_PAGE to 1 less than the actual number.
*/
dev->bad_blk_loc = dev->page_size - dev->cw_size *
(dev->cws_per_page - 1) + 1;
#ifdef CONFIG_QPIC_SERIAL
no_of_address_cycle = 3;
disable_status_after_write = 1;
recovery_cycle = 0;
wr_rd_busy_gap = 20;
#endif
dev->cfg0 |= ((dev->cws_per_page - 1) << NAND_DEV0_CFG0_CW_PER_PAGE_SHIFT) /* 4/8 cw/pg for 2/4k */
|(DATA_BYTES_IN_IMG_PER_CW << NAND_DEV0_CFG0_UD_SIZE_BYTES_SHIFT) /* 516 user data bytes */
|(no_of_address_cycle << NAND_DEV0_CFG0_ADDR_CYCLE_SHIFT) /* 5 address cycles */
|(disable_status_after_write << NAND_DEV0_CFG0_DIS_STS_AFTER_WR_SHIFT);/* Send read status cmd after each write. */
dev->cfg1 |= (recovery_cycle << NAND_DEV0_CFG1_RECOVERY_CYCLES_SHIFT) /* 8 recovery cycles */
|(0 << NAND_DEV0_CFG1_CS_ACTIVE_BSY_SHIFT) /* Allow CS deassertion */
|(dev->bad_blk_loc << NAND_DEV0_CFG1_BAD_BLK_BYTE_NUM_SHIFT)/* Bad block marker location */
|(0 << NAND_DEV0_CFG1_BAD_BLK_IN_SPARE_SHIFT) /* Bad block in user data area */
|(wr_rd_busy_gap << NAND_DEV0_CFG1_WR_RD_BSY_GAP_SHIFT) /* 8 cycle tWB/tRB */
|(dev->widebus << NAND_DEV0_CFG1_WIDE_BUS_SHIFT); /* preserve wide flash flag */
dev->cfg0_raw = ((dev->cws_per_page- 1) << NAND_DEV0_CFG0_CW_PER_PAGE_SHIFT)
|(no_of_address_cycle << NAND_DEV0_CFG0_ADDR_CYCLE_SHIFT)
|(dev->cw_size << NAND_DEV0_CFG0_UD_SIZE_BYTES_SHIFT) //figure out the size of cw
| (disable_status_after_write << NAND_DEV0_CFG0_DIS_STS_AFTER_WR_SHIFT);
dev->cfg1_raw = (recovery_cycle << NAND_DEV0_CFG1_RECOVERY_CYCLES_SHIFT)
| (0 << NAND_DEV0_CFG1_CS_ACTIVE_BSY_SHIFT)
| (17 << NAND_DEV0_CFG1_BAD_BLK_BYTE_NUM_SHIFT)
| (1 << NAND_DEV0_CFG1_BAD_BLK_IN_SPARE_SHIFT)
| (wr_rd_busy_gap << NAND_DEV0_CFG1_WR_RD_BSY_GAP_SHIFT)
| (dev->widebus << NAND_DEV0_CFG1_WIDE_BUS_SHIFT)
| 1 ; /* to disable reed solomon ecc..this feild is now read only. */
dev->ecc_bch_cfg |= (0 << NAND_DEV0_ECC_DISABLE_SHIFT) /* Enable ECC */
| (0 << NAND_DEV0_ECC_SW_RESET_SHIFT) /* Put ECC core in op mode */
| (DATA_BYTES_IN_IMG_PER_CW << NAND_DEV0_ECC_NUM_DATA_BYTES)
| (1 << NAND_DEV0_ECC_FORCE_CLK_OPEN_SHIFT); /* Enable all clocks */
/*
* Safe to use a single instance global variable,
* fake_ecc_layout, since we will be called only once for the
* lifetime of the driver. We can be called more than once,
* but the previous instance of the driver would have been
* deinit before the next one is inited.
*/
memset(&fake_ecc_layout, 0, sizeof(fake_ecc_layout));
chip->ecc.layout = &fake_ecc_layout;
return 0;
}
#ifdef CONFIG_QPIC_SERIAL
static int qpic_serial_get_feature(struct mtd_info *mtd, uint32_t ftr_addr)
{
struct cmd_element *cmd_list_ptr = ce_array;
struct cmd_element *cmd_list_ptr_start = ce_array;
uint8_t num_desc = 0;
uint32_t status, nand_ret;
uint32_t exec_cmd = 1;
uint32_t cmd_val = (QPIC_SPI_TRANSFER_MODE_X1 | QPIC_SPI_HOLD_SET |
QPIC_SPI_WP_SET | NAND_CMD_ACC_FEATURE);
/* Set the feature address to NAND_ADDR0 register */
bam_add_cmd_element(cmd_list_ptr, NAND_ADDR0, ftr_addr,
CE_WRITE_TYPE);
cmd_list_ptr++;
/* Set the value 0x0 to NAND_ADDR1 register */
bam_add_cmd_element(cmd_list_ptr, NAND_ADDR1, 0,
CE_WRITE_TYPE);
cmd_list_ptr++;
/* First Clear the feature register to get the fresh feature value */
bam_add_cmd_element(cmd_list_ptr, NAND_FLASH_FEATURES, 0,
CE_WRITE_TYPE);
cmd_list_ptr++;
/* cmd_val = 0x3800000E
* bit-31 is clear means set feature
* bit-30-29 means x1 mode
* bit-28 is set , this is for wp pin
* wp# pin should be set to high then only we can get the feature
* bit-27 SPI_HOLD : this pin also should be high
*/
bam_add_cmd_element(cmd_list_ptr, NAND_FLASH_CMD, cmd_val,
CE_WRITE_TYPE);
cmd_list_ptr++;
/* Execute the cmd */
bam_add_cmd_element(cmd_list_ptr, NAND_EXEC_CMD, exec_cmd,
CE_WRITE_TYPE);
cmd_list_ptr++;
/* Prepare the cmd desc for the above commands */
bam_add_one_desc(&bam, CMD_PIPE_INDEX,
(unsigned char *)cmd_list_ptr_start,
((uint32_t)cmd_list_ptr - (uint32_t)cmd_list_ptr_start),
BAM_DESC_NWD_FLAG | BAM_DESC_CMD_FLAG |
BAM_DESC_INT_FLAG);
/* Keep track of the number of desc added. */
num_desc++;
qpic_nand_wait_for_cmd_exec(num_desc);
status = qpic_nand_read_reg(NAND_FLASH_STATUS, 0);
/* Check for errors */
nand_ret = qpic_nand_check_status(mtd, status);
if (nand_ret) {
printf("%s : CMD status failed\n", __func__);
goto err;
}
/* read the feature register value and update in feature
* Feature value will get updated in [15:8]
*/
nand_ret = qpic_nand_read_reg(NAND_FLASH_FEATURES, 0);
qspi_debug("NAND Feature Register Addr:0x%02x and Val:0x%08x\n",
ftr_addr,nand_ret);
err:
return nand_ret;
}
static int qpic_serial_set_feature(struct mtd_info *mtd, uint32_t ftr_addr,
uint32_t ftr_val)
{
struct cmd_element *cmd_list_ptr = ce_array;
struct cmd_element *cmd_list_ptr_start = ce_array;
uint8_t num_desc = 0;
uint32_t status, nand_ret;
uint32_t cmd_val = (QPIC_SPI_SET_FEATURE | QPIC_SPI_WP_SET |
QPIC_SPI_HOLD_SET | QPIC_SPI_TRANSFER_MODE_X1 |
NAND_CMD_ACC_FEATURE);
uint32_t exec_cmd = 1;
/* set the feature value to NAND_FLASH_FEATURES feature register */
bam_add_cmd_element(cmd_list_ptr, NAND_FLASH_FEATURES, ftr_val,
CE_WRITE_TYPE);
cmd_list_ptr++;
/* Set the feature address to NAND_ADDR0 register */
bam_add_cmd_element(cmd_list_ptr, NAND_ADDR0, ftr_addr,
CE_WRITE_TYPE);
cmd_list_ptr++;
/* Set the value 0x0 to NAND_ADDR1 register */
bam_add_cmd_element(cmd_list_ptr, NAND_ADDR1, 0,
CE_WRITE_TYPE);
cmd_list_ptr++;
/* cmd_val = 0xB800000E
* bit-31 is set means set feature
* bit-30-29 means x1 mode
* bit-28 is set , this is for wp pin
* wp# pin should be set to high then only we can set the feature
* bit-27 SPI_HOLD : this pin also should be high
*/
bam_add_cmd_element(cmd_list_ptr, NAND_FLASH_CMD, cmd_val,
CE_WRITE_TYPE);
cmd_list_ptr++;
/* Execute the cmd */
bam_add_cmd_element(cmd_list_ptr, NAND_EXEC_CMD, exec_cmd,
CE_WRITE_TYPE);
cmd_list_ptr++;
/* Prepare the cmd desc for the above commands */
bam_add_one_desc(&bam, CMD_PIPE_INDEX,
(unsigned char *)cmd_list_ptr_start,
((uint32_t)cmd_list_ptr - (uint32_t)cmd_list_ptr_start),
BAM_DESC_NWD_FLAG | BAM_DESC_CMD_FLAG |
BAM_DESC_INT_FLAG);
/* Keep track of the number of desc added. */
num_desc++;
qpic_nand_wait_for_cmd_exec(num_desc);
status = qpic_nand_read_reg(NAND_FLASH_STATUS, 0);
/* Check for errors */
nand_ret = qpic_nand_check_status(mtd, status);
if (nand_ret) {
printf("%s : CMD status failed\n", __func__);
goto err;
}
err:
return nand_ret;
}
static int qpic_nand_read_id_serial(struct mtd_info *mtd)
{
uint32_t nand_ret;
uint32_t serial_dev_id[2] = {0x0};
int i;
int is_idfound;
struct qpic_nand_dev *dev = MTD_QPIC_NAND_DEV(mtd);
nand_ret = qpic_nand_fetch_id(mtd);
if (!nand_ret) {
serial_dev_id[0] = dev->id & 0x000000ff;
if (serial_dev_id[0] == WINBOND_MFR_ID)
serial_dev_id[1] = (dev->id >> 8) & 0x0000ffff;
else
serial_dev_id[1] = (dev->id >> 8) & 0x000000ff;
for (i = 0; i < ARRAY_SIZE(qpic_serial_nand_tbl); i++) {
serial_params = &qpic_serial_nand_tbl[i];
if (serial_dev_id[0] == WINBOND_MFR_ID)
is_idfound = ((serial_params->id[0] == serial_dev_id[0]) &&
(serial_params->id[1] == (serial_dev_id[1] & 0xff)) &&
(serial_params->id[2] == (serial_dev_id[1] >> 8)));
else
is_idfound = ((serial_params->id[0] == serial_dev_id[0]) &&
(serial_params->id[1] == serial_dev_id[1]));
if (is_idfound) {
printf("Serial Nand Device Found With ID : 0x%02x 0x%02x\n",
serial_dev_id[0],serial_dev_id[1]);
/* Upadate device paramter as per device table */
qpic_serial_update_dev_params(mtd);
return nand_ret;
}
}
if (i == ARRAY_SIZE(qpic_serial_nand_tbl)) {
printf("%s : No serial Nand device found in table.\n",
__func__);
return -QPIC_SERIAL_ERROR;
}
} else {
printf("%s : Error in featching id from device\n",__func__);
goto id_err;
}
id_err:
return nand_ret;
}
int qpic_spi_nand_config(struct mtd_info *mtd)
{
uint32_t status = 0x0;
struct qpic_nand_dev *dev = MTD_QPIC_NAND_DEV(mtd);
uint32_t cmd3_val = NAND_FLASH_DEV_CMD3_VAL;
/* For micron device the READ_CACHE_SEQ command is different than
* Giga device. for Giga 0x31 and for Micron 0x30.
* so based on id update the command configuration register
* CMD3.
*/
if (dev->id == MICRON_DEVICE_ID) {
cmd3_val = (NAND_FLASH_DEV_CMD3_VAL & CMD3_MASK);
writel(cmd3_val, SPI_NAND_DEV_CMD3);
}
/* Get the block protection status*/
status = qpic_serial_get_feature(mtd, FLASH_SPI_NAND_BLK_PROCT_ADDR);
if (status < 0) {
printf("%s : Error in getting feature.\n",__func__);
return status;
}
if ((status >> 8) & FLASH_SPI_NAND_BLK_PROCT_ENABLE) {
qspi_debug("%s: Block protection is enabled\n",__func__);
qspi_debug("%s: Issuing set feature command to disable it.\n",__func__);
status = qpic_serial_set_feature(mtd, FLASH_SPI_NAND_BLK_PROCT_ADDR,
FLASH_SPI_NAND_BLK_PROCT_DISABLE);
if (status < 0) {
printf("%s : Error in disabling block protection.\n",__func__);
return status;
}
/* After disabling the block protection again read the status
* i.e again call the get feature command to get the status
*/
status = qpic_serial_get_feature(mtd, FLASH_SPI_NAND_BLK_PROCT_ADDR);
if (status < 0) {
printf("%s : Error in getting feature.\n",__func__);
return status;
}
if ((status >> 8) & FLASH_SPI_NAND_BLK_PROCT_ENABLE) {
printf("%s : block protection still enabled.We can't erase a block\n",
__func__);
return -QPIC_SERIAL_ERROR;
} else
qspi_debug("%s : Block protection Disabled.\n",__func__);
} else
qspi_debug("%s: Block protection Disabled on Power on.\n",__func__);
/* Get Internal ECC status */
status = qpic_serial_get_feature(mtd, FLASH_SPI_NAND_FR_ADDR);
if (status < 0) {
printf("%s : Error in getting feature.\n",__func__);
return status;
}
if ((status >> 8) & FLASH_SPI_NAND_FR_ECC_ENABLE) {
qspi_debug("%s : Internal ECC enabled, disabling internal ECC\n",__func__);
status >>= 8;
status &= ~(FLASH_SPI_NAND_FR_ECC_ENABLE);
status = qpic_serial_set_feature(mtd, FLASH_SPI_NAND_FR_ADDR,
status);
if (status < 0) {
printf("%s : Error in disabling internal ECC.\n",__func__);
return status;
}
/* again check internal ECC is disabled or not using get feature
* command
*/
status = qpic_serial_get_feature(mtd, FLASH_SPI_NAND_FR_ADDR);
if (status < 0) {
printf("%s : Error in getting feature.\n",__func__);
return status;
}
if ((status >> 8) & FLASH_SPI_NAND_FR_ECC_ENABLE) {
printf("%s: Failed to disabled device internal ECC\n",
__func__);
return -QPIC_SERIAL_ERROR;
} else
qspi_debug("%s : Internal ECC disabled.\n",__func__);
} else
qspi_debug("%s : Internal ECC disabled on power on.\n",__func__);
if (dev->vendor == WINBOND_MFR_ID) {
status = qpic_serial_get_feature(mtd, FLASH_SPI_NAND_FR_ADDR);
if (status < 0) {
printf("%s : Error in getting feature.\n",__func__);
return status;
}
if (!((status >> 8) & FLASH_SPI_NAND_FR_BUFF_ENABLE)) {
qspi_debug("%s :continous buffer mode disabled\n",
__func__);
qspi_debug("%s : Issuing set feature command to enable it\n",
__func__);
status = qpic_serial_set_feature(mtd, FLASH_SPI_NAND_FR_ADDR,
(FLASH_SPI_NAND_FR_BUFF_ENABLE | (status >> 8)));
if (status < 0) {
printf("%s : Error in disabling continous buffer bit.\n",
__func__);
return status;
}
} else {
qspi_debug("%s : continous buffer mode enabled on power on\n",
__func__);
}
}
/* Enable QUAD mode if device supported. Check this condition only
* if dev->quad_mode = true , means device will support Quad mode
* else no need to check for Quad mode.
* For Micron device there is no quad config bit so no need to check
* quad config bit.
*/
/* Get QUAD bit status */
if (!dev->check_quad_config) {
dev->quad_mode = true;
return 0;
}
if (dev->quad_mode) {
status = qpic_serial_get_feature(mtd, FLASH_SPI_NAND_FR_ADDR);
if (status < 0) {
printf("%s : Error in getting feature.\n",__func__);
return status;
}
if (!((status >> 8) & FLASH_SPI_NAND_FR_QUAD_ENABLE)) {
qspi_debug("%s : Quad bit not enabled.\n",__func__);
qspi_debug("%s : Issuning set feature command to enable it.\n",
__func__);
/* Enable quad bit */
status = qpic_serial_set_feature(mtd, FLASH_SPI_NAND_FR_ADDR,
FLASH_SPI_NAND_FR_QUAD_ENABLE);
if (status < 0) {
printf("%s : Error in enabling Quad bit.\n",__func__);
return status;
}
/* Read status again to know wether Quad bit enabled or not */
status = qpic_serial_get_feature(mtd, FLASH_SPI_NAND_FR_ADDR);
if (status < 0) {
printf("%s : Error in getting feature.\n",__func__);
return status;
}
if (!((status >> 8) & FLASH_SPI_NAND_FR_QUAD_ENABLE)) {
qspi_debug("%s:Quad mode not enabled,so use x1 Mode.\n",
__func__);
dev->quad_mode = false;
} else {
qspi_debug("%s: Quad mode enabled. using X4 mode\n",__func__);
}
} else {
qspi_debug("%s: Quad mode enabled on Opwer on.\n",__func__);
}
}
return 0;
}
#endif
/* Onfi probe should issue the following commands to the flash device:
* 1. Read ID - with addr ONFI_READ_ID_ADDR.
* This returns the ONFI ASCII string indicating support for ONFI.
* 2. Read Prameter Page - with addr ONFI_READ_PARAM_PAGE_ADDR.
* This returns the params for the device.
* Each command inturn issues commands- ADDR0, ADDR1, chip_select,
* cfg0, cfg1, cmd_vld, dev_cmd1, read_loc0, flash, exec.
*/
static int
qpic_nand_onfi_probe(struct mtd_info *mtd)
{
struct onfi_probe_params params;
uint32_t vld;
uint32_t dev_cmd1;
uint32_t cmd_vld = NAND_DEV_CMD_VLD_V1_4_20;
uint32_t dev_cmd1_reg = NAND_DEV_CMD1_V1_4_20;
unsigned char *buffer;
unsigned char *onfi_str = read_bytes;
uint32_t *id;
struct onfi_param_page *param_page;
int onfi_ret = NANDC_RESULT_SUCCESS;
#ifdef CONFIG_QPIC_SERIAL
uint32_t nand_ret;
nand_ret = qpic_nand_read_id_serial(mtd);
return nand_ret;
#endif
/* Allocate memory required to read the onfi param page */
buffer = (unsigned char*) malloc(ONFI_READ_PARAM_PAGE_BUFFER_SIZE);
if (buffer == NULL) {
printf("Buffer Alloc Failed \n");
return -ENOMEM;
}
if (hw_ver == QCA_QPIC_V1_5_20) {
cmd_vld = NAND_DEV_CMD_VLD_V1_5_20;
dev_cmd1_reg = NAND_DEV_CMD1_V1_5_20;
}
/* Read the vld and dev_cmd1 registers before modifying */
vld = qpic_nand_read_reg(cmd_vld, 0);
dev_cmd1 = qpic_nand_read_reg(dev_cmd1_reg, 0);
/* Initialize flash cmd */
params.cfg.cmd = NAND_CMD_PAGE_READ;
params.cfg.exec = 1;
/* Execute Read ID cmd */
/* Initialize the config */
params.cfg.cfg0 = NAND_CFG0_RAW_ONFI_ID;
params.cfg.cfg1 = NAND_CFG1_RAW_ONFI_ID;
/* Initialize the cmd and vld */
params.dev_cmd1 = (dev_cmd1 & 0xFFFFFF00) | ONFI_READ_ID_CMD;
params.vld = vld & 0xFFFFFFFE;
/* Initialize the address
* addr1 is not used bcos of the cfg.
*/
params.cfg.addr0 = ONFI_READ_ID_ADDR;
params.cfg.addr1 = 0;
/* Lock the pipe and execute the cmd. */
onfi_ret = onfi_probe_cmd_exec(mtd, &params, onfi_str,
ONFI_READ_ID_BUFFER_SIZE);
if (onfi_ret) {
printf("ONFI Read id cmd failed\n");
goto qpic_nand_onfi_probe_err;
}
/* Write back vld and cmd and unlock the pipe. */
qpic_nand_onfi_probe_cleanup(vld, dev_cmd1);
/* Check for onfi string */
id = (uint32_t*)onfi_str;
if (*id != ONFI_SIGNATURE) {
printf("Not an ONFI device\n");
/* Not an onfi device. Return error. */
onfi_ret = NANDC_RESULT_DEV_NOT_SUPPORTED;
goto qpic_nand_onfi_probe_err;
}
printf("ONFI device found\n");
/* Now read the param page */
/* Initialize the config */
params.cfg.cfg0 = NAND_CFG0_RAW_ONFI_PARAM_PAGE;
params.cfg.cfg1 = NAND_CFG1_RAW_ONFI_PARAM_PAGE;
/* Initialize the cmd and vld */
params.dev_cmd1 = (dev_cmd1 & 0xFFFFFF00) | ONFI_READ_PARAM_PAGE_CMD;
params.vld = vld & 0xFFFFFFFE;
/* Initialize the address
* addr1 is not used bcos of the cfg.
*/
params.cfg.addr0 = ONFI_READ_PARAM_PAGE_ADDR;
params.cfg.addr1 = 0;
/* Lock the pipe and execute the cmd. */
onfi_ret = onfi_probe_cmd_exec(mtd, &params, buffer,
ONFI_READ_PARAM_PAGE_BUFFER_SIZE);
if (onfi_ret) {
printf("ONFI Read param page failed\n");
goto qpic_nand_onfi_probe_err;
}
#ifdef READ_ONFI_PAGE_PARA
memmove(onfi_para.buffer, buffer, ONFI_READ_PARAM_PAGE_BUFFER_SIZE);
onfi_para.size = ONFI_READ_PARAM_PAGE_BUFFER_SIZE;
#endif
/* Write back vld and cmd and unlock the pipe. */
qpic_nand_onfi_probe_cleanup(vld, dev_cmd1);
/* Verify the integrity of the returned page */
param_page = (struct onfi_param_page*)buffer;
/* TODO: Add CRC check to validate the param page. */
/* Save the parameter values */
onfi_ret = qpic_nand_onfi_save_params(mtd, param_page);
qpic_nand_onfi_probe_err:
if (onfi_ret)
printf("ONFI probe failed\n");
if (buffer)
free(buffer);
return onfi_ret;
}
#ifdef CONFIG_QPIC_SERIAL
static void qpic_spi_init(struct mtd_info *mtd)
{
uint32_t xfer_start = NAND_XFR_STEPS_V1_5_20;
int i;
unsigned int default_clk_rate;
int num_desc = 0;
struct cmd_element *cmd_list_ptr = ce_array;
struct cmd_element *cmd_list_ptr_start = ce_array;
unsigned int val;
val = readl(NAND_QSPI_MSTR_CONFIG);
#if defined(QSPI_IO_MACRO_DEFAULT_CLK_320MHZ) && !defined(CONFIG_QSPI_SERIAL_TRAINING)
default_clk_rate = IO_MACRO_CLK_320_MHZ;
val &= ~FB_CLK_BIT;
#else
default_clk_rate = IO_MACRO_CLK_200_MHZ;
val |= FB_CLK_BIT;
#endif
if ((readl(QPIC_NAND_CTRL) & BAM_MODE_EN)) {
bam_add_cmd_element(cmd_list_ptr, NAND_QSPI_MSTR_CONFIG,
(uint32_t)val, CE_WRITE_TYPE);
cmd_list_ptr++;
bam_add_cmd_element(cmd_list_ptr, NAND_FLASH_SPI_CFG,
(uint32_t)0, CE_WRITE_TYPE);
cmd_list_ptr++;
bam_add_cmd_element(cmd_list_ptr, NAND_FLASH_SPI_CFG,
(uint32_t)SPI_CFG_VAL, CE_WRITE_TYPE);
cmd_list_ptr++;
val = SPI_CFG_VAL & ~SPI_LOAD_CLK_CNTR_INIT_EN;
bam_add_cmd_element(cmd_list_ptr, NAND_FLASH_SPI_CFG,
(uint32_t)val, CE_WRITE_TYPE);
cmd_list_ptr++;
bam_add_one_desc(&bam,
CMD_PIPE_INDEX,
(unsigned char*)cmd_list_ptr_start,
((uint32_t)cmd_list_ptr - (uint32_t)cmd_list_ptr_start),
BAM_DESC_CMD_FLAG);
num_desc++;
/* Notify BAM HW about the newly added descriptors */
bam_sys_gen_event(&bam, CMD_PIPE_INDEX, num_desc);
} else {
writel(val, NAND_QSPI_MSTR_CONFIG);
writel(0x0, NAND_FLASH_SPI_CFG);
writel(SPI_CFG_VAL, NAND_FLASH_SPI_CFG);
val = SPI_CFG_VAL & ~SPI_LOAD_CLK_CNTR_INIT_EN;
writel(val, NAND_FLASH_SPI_CFG);
}
num_desc = 0;
/* set the FB_CLK_BIT of register QPIC_QSPI_MSTR_CONFIG
* to by pass the serial training. if this FB_CLK_BIT
* bit enabled then , we can apply upto maximum 200MHz
* input to IO_MACRO_BLOCK.
*/
qpic_set_clk_rate(default_clk_rate, QPIC_IO_MACRO_CLK,
GPLL0_CLK_SRC);
/*qpic_set_clk_rate(IO_MACRO_CLK_200_MHZ, QPIC_IO_MACRO_CLK,
XO_CLK_SRC);*/
/* According to HPG Setting Xfer steps and spi_num_addr_cycles
* is part of initialization flow before reset.However these
* values differ from NAND part to part.sitting in QPIC layer
* we won't know which NAND we don't know which NAND is connected.
* So we are not following HPG init sequence.Instead we reset and
* read id of NAND,then based on NAND ID we get Xfer steps
* and spi_num_addr_cycles and configure them in this function.Since
* Xfer steps and spi_num_addr_cycles are required for read/write/erase
* functionality.
*
* NOTE: For now address cycle is same for Giga devices & Micron devices
* so we can configure no of addess cycle here only
* The NAND_FLASH_XFR_STEP register also fixed for both the devices so we
* can configure this register here only . later change this logic as per
* device
*
* NOTE: The XFER register value is now fixed as HPG.
*
*/
for (i = 0; i < QPIC_NUM_XFER_STEPS; i++)
writel(qpic_onfi_mode_to_xfer_steps[0][i],
xfer_start + 4 * i);
writel(NAND_FLASH_DEV_CMD0_VAL, SPI_NAND_DEV_CMD0);
writel(NAND_FLASH_DEV_CMD1_VAL, SPI_NAND_DEV_CMD1);
writel(NAND_FLASH_DEV_CMD2_VAL, SPI_NAND_DEV_CMD2);
writel(NAND_FLASH_DEV_CMD3_VAL, SPI_NAND_DEV_CMD3);
writel(NAND_FLASH_DEV_CMD7_VAL, SPI_NAND_DEV_CMD7);
/* NAND_DEV_CMD8 & NAND_DEV_CMD9 default value will be used for
* QSPI
*/
writel(FLASH_DEV_CMD_VLD, NAND_FLASH_DEV_CMD_VLD);
/* No of address cycle is same for Giga device & Micron so
* configure no of address cycle now.
*/
if ((readl(QPIC_NAND_CTRL) & BAM_MODE_EN)) {
cmd_list_ptr = ce_array;
bam_add_cmd_element(cmd_list_ptr, NAND_SPI_NUM_ADDR_CYCLES,
(uint32_t)SPI_NUM_ADDR_CYCLES, CE_WRITE_TYPE);
cmd_list_ptr++;
bam_add_cmd_element(cmd_list_ptr, NAND_SPI_BUSY_CHECK_WAIT_CNT,
(uint32_t)SPI_BUSY_CHECK_WAIT_CNT, CE_WRITE_TYPE);
cmd_list_ptr++;
bam_add_one_desc(&bam,
CMD_PIPE_INDEX,
(unsigned char*)cmd_list_ptr_start,
((uint32_t)cmd_list_ptr - (uint32_t)cmd_list_ptr_start),
BAM_DESC_CMD_FLAG);
num_desc++;
/* Notify BAM HW about the newly added descriptors */
bam_sys_gen_event(&bam, CMD_PIPE_INDEX, num_desc);
} else {
writel(SPI_NUM_ADDR_CYCLES, NAND_SPI_NUM_ADDR_CYCLES);
writel(SPI_BUSY_CHECK_WAIT_CNT, NAND_SPI_BUSY_CHECK_WAIT_CNT);
}
}
#endif
static int qpic_nand_reset(struct mtd_info *mtd)
{
struct cmd_element *cmd_list_ptr = ce_array;
struct cmd_element *cmd_list_ptr_start = ce_array;
uint8_t num_desc = 0;
uint32_t status, nand_ret;
uint32_t exec_cmd = 1;
uint32_t flash_cmd = NAND_CMD_RESET_DEVICE;
#ifdef CONFIG_QPIC_SERIAL
flash_cmd |= (QPIC_SPI_WP_SET | QPIC_SPI_HOLD_SET | QPIC_SPI_TRANSFER_MODE_X1);
uint32_t cfg0 = SPI_NAND_DEVn_CFG0 & 0xff00f0;
uint32_t cfg1 = SPI_NAND_DEVn_CFG1_RESET;
uint32_t ecc_cfg = ((SPI_NAND_DEVn_ECC_CFG & 0x0f000002) | (1 << 0))
& ~(1 << 1);
/* As per HPG the reset sequence as follow
* NAND_DEV0_CFG0 0x005400D0 or 0x00540010
* NAND_DEVn_CFG1 0x087476B1
* NAND_DEV0_ECC_CFG 0x02000001
* NAND_FLASH_CMD 0x3800000D
* NAND_EXEC_CMD 0x00000001
*/
/* write the reset sequence as per HPG */
bam_add_cmd_element(cmd_list_ptr, NAND_DEV0_CFG0, (uint32_t)cfg0,
CE_WRITE_TYPE);
cmd_list_ptr++;
bam_add_cmd_element(cmd_list_ptr, NAND_DEV0_CFG1, (uint32_t)cfg1,
CE_WRITE_TYPE);
cmd_list_ptr++;
bam_add_cmd_element(cmd_list_ptr, NAND_DEV0_ECC_CFG, (uint32_t)ecc_cfg,
CE_WRITE_TYPE);
cmd_list_ptr++;
#endif
/* Issue the Reset device command to the NANDc */
bam_add_cmd_element(cmd_list_ptr, NAND_FLASH_CMD, (uint32_t)flash_cmd,
CE_WRITE_TYPE);
cmd_list_ptr++;
/* Execute the cmd */
bam_add_cmd_element(cmd_list_ptr, NAND_EXEC_CMD, (uint32_t)exec_cmd,
CE_WRITE_TYPE);
cmd_list_ptr++;
/* Prepare the cmd desc for the above commands */
bam_add_one_desc(&bam, CMD_PIPE_INDEX,
(unsigned char *)cmd_list_ptr_start,
((uint32_t)cmd_list_ptr - (uint32_t)cmd_list_ptr_start),
BAM_DESC_NWD_FLAG | BAM_DESC_CMD_FLAG |
BAM_DESC_INT_FLAG);
/* Keep track of the number of desc added. */
num_desc++;
qpic_nand_wait_for_cmd_exec(num_desc);
status = qpic_nand_read_reg(NAND_FLASH_STATUS, 0);
/* Check for errors */
nand_ret = qpic_nand_check_status(mtd, status);
if (nand_ret) {
printf("Reset cmd status failed\n");
return nand_ret;
}
return nand_ret;
}
/* Enquues a desc for a flash cmd with NWD flag set:
* cfg: Defines the configuration for the flash cmd.
* start: Address where the command elements are added.
*
* Returns the address where the next cmd element can be added.
*/
struct cmd_element*
qpic_nand_add_cmd_ce(struct cfg_params *cfg,
struct cmd_element *start)
{
struct cmd_element *cmd_list_ptr;
cmd_list_ptr = qpic_nand_add_addr_n_cfg_ce(cfg, start);
bam_add_cmd_element(cmd_list_ptr, NAND_FLASH_CMD, (uint32_t)cfg->cmd,
CE_WRITE_TYPE);
cmd_list_ptr++;
bam_add_cmd_element(cmd_list_ptr, NAND_EXEC_CMD, (uint32_t)cfg->exec,
CE_WRITE_TYPE);
cmd_list_ptr++;
return cmd_list_ptr;
}
/* Reads nand_flash_status */
struct cmd_element*
qpic_nand_add_read_ce(struct cmd_element *start, uint32_t *flash_status_read)
{
struct cmd_element *cmd_list_ptr = start;
bam_add_cmd_element(cmd_list_ptr, NAND_FLASH_STATUS,
(uint32_t)((addr_t)flash_status_read), CE_READ_TYPE);
cmd_list_ptr++;
return cmd_list_ptr;
}
/* Resets nand_flash_status and nand_read_status */
struct cmd_element*
qpic_nand_reset_status_ce(struct cmd_element *start, uint32_t read_status)
{
struct cmd_element *cmd_list_ptr = start;
uint32_t flash_status_reset;
uint32_t read_status_reset;
/* Read and reset the status registers. */
flash_status_reset = NAND_FLASH_STATUS_RESET;
read_status_reset = NAND_READ_STATUS_RESET;
bam_add_cmd_element(cmd_list_ptr, NAND_FLASH_STATUS,
(uint32_t)flash_status_reset, CE_WRITE_TYPE);
cmd_list_ptr++;
if (read_status) {
bam_add_cmd_element(cmd_list_ptr, NAND_READ_STATUS,
(uint32_t)read_status_reset, CE_WRITE_TYPE);
cmd_list_ptr++;
}
return cmd_list_ptr;
}
struct cmd_element*
qpic_nand_add_isbad_cmd_ce(struct cfg_params *cfg,
struct cmd_element *start)
{
struct cmd_element *cmd_list_ptr = start;
bam_add_cmd_element(cmd_list_ptr, NAND_DEV0_ECC_CFG,
(uint32_t)cfg->ecc_cfg, CE_WRITE_TYPE);
cmd_list_ptr++;
#ifdef CONFIG_QPIC_SERIAL
bam_add_cmd_element(cmd_list_ptr, NAND_READ_LOCATION_LAST_CW_n(0),
(uint32_t)cfg->addr_loc_0, CE_WRITE_TYPE);
#else
bam_add_cmd_element(cmd_list_ptr, NAND_READ_LOCATION_n(0),
(uint32_t)cfg->addr_loc_0, CE_WRITE_TYPE);
#endif
cmd_list_ptr++;
cmd_list_ptr = qpic_nand_add_cmd_ce(cfg, cmd_list_ptr);
return cmd_list_ptr;
}
static int
qpic_nand_block_isbad_exec(struct mtd_info *mtd,
struct cfg_params *params,
uint8_t *bad_block)
{
struct cmd_element *cmd_list_ptr = ce_array;
struct cmd_element *cmd_list_ptr_start = ce_array;
uint8_t desc_flags = BAM_DESC_NWD_FLAG | BAM_DESC_CMD_FLAG
| BAM_DESC_LOCK_FLAG | BAM_DESC_INT_FLAG;
int num_desc = 0;
uint32_t status = 0;
int nand_ret = NANDC_RESULT_SUCCESS;
cmd_list_ptr = qpic_nand_add_isbad_cmd_ce(params, cmd_list_ptr);
/* Enqueue the desc for the above commands */
bam_add_one_desc(&bam,
CMD_PIPE_INDEX,
(unsigned char*)cmd_list_ptr_start,
((uint32_t)cmd_list_ptr - (uint32_t)cmd_list_ptr_start),
desc_flags);
num_desc++;
/* Add Data desc */
bam_add_desc(&bam,
DATA_PRODUCER_PIPE_INDEX,
(unsigned char *)((addr_t)bad_block),
4,
BAM_DESC_INT_FLAG);
qpic_nand_wait_for_cmd_exec(num_desc);
status = qpic_nand_read_reg(NAND_FLASH_STATUS, 0);
nand_ret = qpic_nand_check_status(mtd, status);
/* Dummy read to unlock pipe. */
status = qpic_nand_read_reg(NAND_FLASH_STATUS, BAM_DESC_UNLOCK_FLAG);
if (nand_ret)
return nand_ret;
qpic_nand_wait_for_data(DATA_PRODUCER_PIPE_INDEX);
return nand_ret;
}
/**
* qpic_nand_block_isbad() - Checks is given block is bad
* @page - number of page the block starts at
*
* Returns nand_result_t
*/
static int qpic_nand_block_isbad(struct mtd_info *mtd, loff_t offs)
{
unsigned cwperpage;
struct cfg_params params;
unsigned nand_ret = NANDC_RESULT_SUCCESS;
uint32_t page;
struct nand_chip *chip = MTD_NAND_CHIP(mtd);
struct qpic_nand_dev *dev = MTD_QPIC_NAND_DEV(mtd);
uint8_t *bad_block = read_bytes;
/* Check for invalid offset */
if (offs > mtd->size)
return -EINVAL;
if (offs & (mtd->erasesize - 1))
return -EINVAL;
page = offs >> chip->page_shift;
/* Read the bad block value from the flash.
* Bad block value is stored in the first page of the block.
*/
/* Read the first page in the block. */
cwperpage = (dev->cws_per_page);
params.cmd = NAND_CMD_PAGE_READ_ECC;
/* Read page cmd */
#ifdef CONFIG_QPIC_SERIAL
params.cmd = NAND_CMD_PAGE_READ;
if (dev->quad_mode)
params.cmd |= QPIC_SPI_TRANSFER_MODE_X4;
else
params.cmd |= QPIC_SPI_TRANSFER_MODE_X1;
params.cmd |= (QPIC_SPI_WP_SET | QPIC_SPI_HOLD_SET);
#endif
/* Clear the CW per page bits */
params.cfg0 = dev->cfg0_raw & ~(7U <<
NAND_DEV0_CFG0_CW_PER_PAGE_SHIFT);
params.cfg1 = dev->cfg1_raw;
/* addr0 - Write column addr + few bits in row addr upto 32 bits. */
params.addr0 = ((page << 16) | (USER_DATA_BYTES_PER_CW *
(cwperpage)));
/* addr1 - Write rest of row addr.
* This will be all 0s.
*/
params.addr1 = (page >> 16) & 0xff;
params.addr_loc_0 = NAND_RD_LOC_OFFSET(0);
params.addr_loc_0 |= NAND_RD_LOC_LAST_BIT(1);
params.addr_loc_0 |= NAND_RD_LOC_SIZE(4); /* Read 4 bytes */
params.ecc_cfg = 0x1; /* Disable ECC */
params.exec = 1;
if (qpic_nand_block_isbad_exec(mtd, &params, bad_block)) {
printf("Could not read bad block value\n");
return NANDC_RESULT_FAILURE;
}
#if !defined(CONFIG_SYS_DCACHE_OFF)
flush_dcache_range((unsigned long)bad_block,
(unsigned long)bad_block + sizeof(bad_block));
#endif
if (dev->widebus) {
if (bad_block[0] != 0xFF && bad_block[1] != 0xFF) {
nand_ret = NANDC_RESULT_BAD_BLOCK;
}
} else if (bad_block[0] != 0xFF) {
nand_ret = NANDC_RESULT_BAD_BLOCK;
}
return nand_ret;
}
/* Return num of desc added. */
static void
qpic_nand_add_wr_page_cws_cmd_desc(struct mtd_info *mtd, struct cfg_params *cfg,
uint32_t status[],
enum nand_cfg_value cfg_mode)
{
struct qpic_nand_dev *dev = MTD_QPIC_NAND_DEV(mtd);
struct cmd_element *cmd_list_ptr = ce_array;
struct cmd_element *cmd_list_read_ptr = ce_read_array;
struct cmd_element *cmd_list_ptr_start = ce_array;
struct cmd_element *cmd_list_read_ptr_start = ce_read_array;
uint32_t ecc;
int num_desc = 0;
int int_flag = 0;
unsigned int i;
#ifdef CONFIG_QPIC_SERIAL
/* For Serial NAND devices the page program sequence as
* 02H (PROGRAM LOAD)/32H (PROGRAM LOAD x4)
* 06H (WRITE ENABLE)
* 10H (PROGRAM EXECUTE)
* 0FH (GET FEATURE command to read the status)
* No need to 0x02 & 0x32 command manually, controller
* automatically send this command to device. we have already mapped
* these command in QPIC_FLASH_DEV_CMD9 register, similar for command
* 0x06 & 0x0F, controller will take care internally
*
* NOTE: While initializing we have already enabeld quad bit i.e QE-bit
* and disable write protection so no need to check here.
*/
if (dev->quad_mode)
cfg->cmd |= QPIC_SPI_TRANSFER_MODE_X4;
else
cfg->cmd |= QPIC_SPI_TRANSFER_MODE_X1;
cfg->cmd |= (QPIC_SPI_WP_SET | QPIC_SPI_HOLD_SET);
#endif
if (cfg_mode == NAND_CFG) {
ecc = dev->ecc_bch_cfg;
} else {
ecc = 0x1; /* Disable ECC */
}
/* Add ECC configuration */
bam_add_cmd_element(cmd_list_ptr, NAND_DEV0_ECC_CFG,
(uint32_t)ecc, CE_WRITE_TYPE);
cmd_list_ptr++;
cmd_list_ptr = qpic_nand_add_addr_n_cfg_ce(cfg, cmd_list_ptr);
bam_add_cmd_element(cmd_list_ptr, NAND_FLASH_CMD,
(uint32_t)cfg->cmd, CE_WRITE_TYPE);
cmd_list_ptr++;
/* Enqueue the desc for the above commands */
bam_add_one_desc(&bam,
CMD_PIPE_INDEX,
(unsigned char*)cmd_list_ptr_start,
((uint32_t)cmd_list_ptr - (uint32_t)cmd_list_ptr_start),
BAM_DESC_CMD_FLAG | BAM_DESC_LOCK_FLAG);
num_desc++;
/* Add CE for all the CWs */
for (i = 0; i < (dev->cws_per_page); i++) {
cmd_list_ptr_start = cmd_list_ptr;
int_flag = BAM_DESC_INT_FLAG;
bam_add_cmd_element(cmd_list_ptr, NAND_EXEC_CMD, (uint32_t)cfg->exec,
CE_WRITE_TYPE);
cmd_list_ptr++;
/* Enqueue the desc for the above commands */
bam_add_one_desc(&bam,
CMD_PIPE_INDEX,
(unsigned char*)cmd_list_ptr_start,
((uint32_t)cmd_list_ptr - (uint32_t)cmd_list_ptr_start),
BAM_DESC_NWD_FLAG | BAM_DESC_CMD_FLAG);
num_desc++;
cmd_list_ptr_start = cmd_list_ptr;
cmd_list_read_ptr_start = cmd_list_read_ptr;
cmd_list_read_ptr = qpic_nand_add_read_ce(cmd_list_read_ptr_start,
&status[i]);
/* Enqueue the desc for the NAND_FLASH_STATUS read command */
bam_add_one_desc(&bam,
CMD_PIPE_INDEX,
(unsigned char*)cmd_list_read_ptr_start,
((uint32_t)cmd_list_read_ptr -
(uint32_t)cmd_list_read_ptr_start),
BAM_DESC_CMD_FLAG);
/* Set interrupt bit only for the last CW */
if (i == (dev->cws_per_page) - 1)
cmd_list_ptr = qpic_nand_reset_status_ce(cmd_list_ptr,
1);
else
cmd_list_ptr = qpic_nand_reset_status_ce(cmd_list_ptr,
0);
/* Enqueue the desc for NAND_FLASH_STATUS and NAND_READ_STATUS
* write commands */
bam_add_one_desc(&bam,
CMD_PIPE_INDEX,
(unsigned char*)cmd_list_ptr_start,
((uint32_t)cmd_list_ptr -
(uint32_t)cmd_list_ptr_start),
int_flag | BAM_DESC_CMD_FLAG | BAM_DESC_UNLOCK_FLAG);
num_desc += 2;
qpic_nand_wait_for_cmd_exec(num_desc);
#if !defined(CONFIG_SYS_DCACHE_OFF)
flush_dcache_range((unsigned long)status,
(unsigned long)status +
sizeof(status_write));/*caluclating the size*/
#endif
status[i] = qpic_nand_check_status(mtd, status[i]);
num_desc = 0;
}
return;
}
void
qpic_add_wr_page_cws_data_desc(struct mtd_info *mtd, const void *buffer,
enum nand_cfg_value cfg_mode,
const void *spareaddr)
{
struct qpic_nand_dev *dev = MTD_QPIC_NAND_DEV(mtd);
int len;
int flags;
uint32_t start;
unsigned num_desc = 0;
unsigned i;
for( i = 0; i < (dev->cws_per_page); i++) {
flags = 0;
/* Set the interrupt flag on the last CW write for the page. */
if( i == (dev->cws_per_page) - 1)
flags |= BAM_DESC_INT_FLAG;
if (cfg_mode != NAND_CFG_RAW) {
start = (uint32_t)buffer + i * DATA_BYTES_IN_IMG_PER_CW;
if (i < ((dev->cws_per_page) - 1)) {
len = DATA_BYTES_IN_IMG_PER_CW;
flags |= BAM_DESC_EOT_FLAG;
} else {
/* Allow space for spare bytes in the last page */
len = USER_DATA_BYTES_PER_CW -
(((dev->cws_per_page) - 1) << 2);
flags = 0;
}
} else {
start = (uint32_t)buffer + i * (dev->cw_size);
if (i < ((dev->cws_per_page) - 1)) {
len = (dev->cw_size);
flags |= BAM_DESC_EOT_FLAG;
}
else {
len = (dev->cw_size - mtd->oobsize);
flags = 0;
}
}
bam_add_one_desc(&bam, DATA_CONSUMER_PIPE_INDEX, (unsigned char*)(start),
len, flags);
num_desc++;
if ((i == ((dev->cws_per_page) - 1))) {
/* write extra data */
start = (uint32_t)spareaddr;
if (cfg_mode == NAND_CFG)
len = ((dev->cws_per_page) << 2);
else
len = mtd->oobsize;
flags = BAM_DESC_EOT_FLAG | BAM_DESC_INT_FLAG;
bam_add_one_desc(&bam, DATA_CONSUMER_PIPE_INDEX,
(unsigned char*)(start), len, flags);
num_desc++;
}
}
bam_sys_gen_event(&bam, DATA_CONSUMER_PIPE_INDEX, num_desc);
}
static nand_result_t
qpic_nand_write_page(struct mtd_info *mtd, uint32_t pg_addr,
enum nand_cfg_value cfg_mode,
struct mtd_oob_ops *ops)
{
struct qpic_nand_dev *dev = MTD_QPIC_NAND_DEV(mtd);
struct cfg_params cfg;
int nand_ret = NANDC_RESULT_SUCCESS;
unsigned i;
if (cfg_mode == NAND_CFG_RAW) {
cfg.cfg0 = dev->cfg0_raw;
cfg.cfg1 = dev->cfg1_raw;
} else {
cfg.cfg0 = dev->cfg0;
cfg.cfg1 = dev->cfg1;
}
cfg.cmd = NAND_CMD_PRG_PAGE;
cfg.exec = 1;
cfg.addr0 = pg_addr << 16;
cfg.addr1 = (pg_addr >> 16) & 0xff;
qpic_add_wr_page_cws_data_desc(mtd, ops->datbuf, cfg_mode, ops->oobbuf);
qpic_nand_add_wr_page_cws_cmd_desc(mtd, &cfg, status_write, cfg_mode);
/* Check for errors */
for(i = 0; i < (dev->cws_per_page); i++) {
nand_ret = qpic_nand_check_status(mtd, status_write[i]);
if (nand_ret) {
printf(
"Failed to write CW %d for page: %d\n",
i, pg_addr);
break;
}
}
/* Wait for data to be available */
qpic_nand_wait_for_data(DATA_CONSUMER_PIPE_INDEX);
ops->retlen += mtd->writesize;
ops->datbuf += mtd->writesize;
if (ops->oobbuf != NULL) {
ops->oobretlen += dev->oob_per_page;
ops->oobbuf += dev->oob_per_page;
}
return nand_ret;
}
static int
qpic_nand_mark_badblock(struct mtd_info *mtd, loff_t offs)
{
struct qpic_nand_dev *dev = MTD_QPIC_NAND_DEV(mtd);
struct nand_chip *chip = MTD_NAND_CHIP(mtd);
uint32_t page;
int nand_ret = NANDC_RESULT_SUCCESS;
struct mtd_oob_ops ops;
/* Check for invalid offset */
if (offs > mtd->size)
return -EINVAL;
if (offs & (mtd->erasesize - 1))
return -EINVAL;
page = offs >> chip->page_shift;
ops.mode = MTD_OPS_RAW;
ops.len = mtd->writesize;
ops.retlen = 0;
ops.ooblen = mtd->oobsize;
ops.oobretlen = 0;
ops.ooboffs = 0;
ops.datbuf = dev->zero_page;
ops.oobbuf = dev->zero_oob;
/* Going to first page of the block */
if (page & (dev->num_pages_per_blk_mask))
page = page - (page & (dev->num_pages_per_blk_mask));
nand_ret = qpic_nand_write_page(mtd, page, NAND_CFG_RAW, &ops);
if (!nand_ret)
mtd->ecc_stats.badblocks++;
return nand_ret;
}
/*
* Populate flash parameters from the look up table.
*/
static void qpic_nand_get_info_flash_dev(struct mtd_info *mtd,
const struct nand_flash_dev *flash_dev)
{
struct qpic_nand_dev *dev = MTD_QPIC_NAND_DEV(mtd);
mtd->writesize = dev->page_size = flash_dev->pagesize;
mtd->erasesize = dev->block_size = flash_dev->erasesize;
mtd->oobsize = dev->spare_size = flash_dev->oobsize ?
flash_dev->oobsize : (flash_dev->pagesize >> 5);
}
/*
* Populate flash parameters from the configuration byte.
*/
static void qpic_nand_get_info_cfg(struct mtd_info *mtd, uint8_t cfg_id)
{
struct qpic_nand_dev *dev = MTD_QPIC_NAND_DEV(mtd);
u_int cfg_page_size;
u_int cfg_block_size;
u_int cfg_spare_size;
u_int chunks;
u_int spare_per_chunk;
/* writesize = 1KB * (2 ^ cfg_page_size) */
cfg_page_size = NAND_CFG_PAGE_SIZE(cfg_id);
mtd->writesize = dev->page_size = (1024 << cfg_page_size);
/* erasesize = 64KB * (2 ^ cfg_block_size) */
cfg_block_size = NAND_CFG_BLOCK_SIZE(cfg_id);
mtd->erasesize = dev->block_size = ((64 * 1024) << cfg_block_size);
/* Spare per 512B = 8 * (2 ^ cfg_spare_size) */
cfg_spare_size = NAND_CFG_SPARE_SIZE(cfg_id);
chunks = (mtd->writesize / CHUNK_SIZE);
spare_per_chunk = (8 << cfg_spare_size);
mtd->oobsize = dev->spare_size = (spare_per_chunk * chunks);
}
/*
* Retreive the flash info entry using the device ID.
*/
static const struct nand_flash_dev *flash_get_dev(uint8_t dev_id)
{
int i;
for (i = 0; nand_flash_ids[i].id; i++) {
if (nand_flash_ids[i].dev_id == dev_id)
return &nand_flash_ids[i];
}
return NULL;
}
/*
* Retreive the manuf. info entry using manufacturer ID.
*/
static const struct nand_manufacturers *flash_get_man(uint8_t man_id)
{
int i;
for (i = 0; nand_manuf_ids[i].id; i++) {
if (nand_manuf_ids[i].id == man_id)
return &nand_manuf_ids[i];
}
return NULL;
}
/*
* Populate flash parameters for non-ONFI devices.
*/
static int qpic_nand_get_info(struct mtd_info *mtd, uint32_t flash_id)
{
uint8_t man_id;
uint8_t dev_id;
uint8_t cfg_id;
const struct nand_manufacturers *flash_man;
const struct nand_flash_dev *flash_dev;
struct qpic_nand_dev *dev = MTD_QPIC_NAND_DEV(mtd);
uint32_t min_oobsize_8bit_ecc;
man_id = NAND_ID_MAN(flash_id);
dev_id = NAND_ID_DEV(flash_id);
cfg_id = NAND_ID_CFG(flash_id);
debug("Manufacturer ID: %x\n", man_id);
debug("Device ID: %x\n", dev_id);
debug("Config. Byte: %x\n", cfg_id);
flash_man = flash_get_man(man_id);
flash_dev = flash_get_dev(dev_id);
if (flash_man == NULL || flash_dev == NULL) {
printf("qpic_nand: unknown NAND device manufacturer: %x"
" device: %x\n", man_id, dev_id);
return -ENOENT;
}
mtd->size = MB_TO_BYTES(flash_dev->chipsize);
/*
* For older NAND flash, we obtained the flash information
* from the flash_dev table. For newer flashes the information
* is available in the cfg byte, in the NAND ID sequence.
*/
if (!flash_dev->pagesize)
qpic_nand_get_info_cfg(mtd, cfg_id);
else
qpic_nand_get_info_flash_dev(mtd, flash_dev);
min_oobsize_8bit_ecc =
(mtd->writesize / CHUNK_SIZE) * NAND_CW_SPARE_SIZE_8_BIT_ECC;
/*
* Calculate the minimum required oobsize for using 8 bit ecc and use
* 8 bit ecc if this chip oobsize equal or more than that.
*/
mtd->ecc_strength = mtd->oobsize >= min_oobsize_8bit_ecc ? 8 : 4;
dev->num_blocks = mtd->size;
dev->num_blocks /= (dev->block_size);
dev->num_pages_per_blk = dev->block_size / dev->page_size;
dev->num_pages_per_blk_mask = dev->num_pages_per_blk - 1;
return 0;
}
static void
qpic_nand_non_onfi_probe(struct mtd_info *mtd)
{
struct qpic_nand_dev *dev= MTD_QPIC_NAND_DEV(mtd);
/* Read the nand id. */
qpic_nand_fetch_id(mtd);
qpic_nand_get_info(mtd, dev->id);
return;
}
static void qpic_nand_sync(struct mtd_info *mtd)
{
/* Nop */
}
static int qpic_nand_scan_bbt_nop(struct mtd_info *mtd)
{
return 0;
}
/*
* Estimate the no. of pages to read, based on the data length and oob
* length.
*/
static u_long qpic_get_read_page_count(struct mtd_info *mtd,
struct mtd_oob_ops *ops, loff_t to)
{
struct qpic_nand_dev *dev = MTD_QPIC_NAND_DEV(mtd);
struct nand_chip *chip = MTD_NAND_CHIP(mtd);
uint32_t start_page, end_page;
if (ops->datbuf != NULL) {
/*
* Determine start page (can be non page aligned) and end page
* and calculate number of pages.
*/
start_page = to >> chip->page_shift;
end_page = (to + ops->len - 1) >> chip->page_shift;
return end_page - start_page + 1;
} else {
if (dev->oob_per_page == 0)
return 0;
return (ops->ooblen + dev->oob_per_page - 1) / dev->oob_per_page;
}
}
/*
* Return the buffer where the next OOB data should be stored. If the
* user buffer is insufficient to hold one page worth of OOB data,
* return an internal buffer, to hold the data temporarily.
*/
static uint8_t *qpic_nand_read_oobbuf(struct mtd_info *mtd,
struct mtd_oob_ops *ops)
{
size_t read_ooblen;
struct qpic_nand_dev *dev = MTD_QPIC_NAND_DEV(mtd);
if (ops->oobbuf == NULL)
return NULL;
read_ooblen = ops->ooblen - ops->oobretlen;
if (read_ooblen < dev->oob_per_page)
return dev->pad_oob;
return ops->oobbuf + ops->oobretlen;
}
/*
* Return the buffer where the next in-band data should be stored. If
* the user buffer is insufficient to hold one page worth of in-band
* data, return an internal buffer, to hold the data temporarily.
*/
static uint8_t *qpic_nand_read_datbuf(struct mtd_info *mtd,
struct mtd_oob_ops *ops, uint32_t col)
{
size_t read_datlen;
struct qpic_nand_dev *dev = MTD_QPIC_NAND_DEV(mtd);
if (ops->datbuf == NULL)
return NULL;
read_datlen = ops->len - ops->retlen;
if (read_datlen < mtd->writesize || col)
return dev->pad_dat;
return ops->datbuf + ops->retlen;
}
/*
* Copy the OOB data from the internal buffer, to the user buffer, if
* the internal buffer was used for the read.
*/
static void qpic_nand_read_oobcopy(struct mtd_info *mtd,
struct mtd_oob_ops *ops)
{
size_t ooblen;
size_t read_ooblen;
struct qpic_nand_dev *dev = MTD_QPIC_NAND_DEV(mtd);
if (ops->oobbuf == NULL)
return;
read_ooblen = ops->ooblen - ops->oobretlen;
ooblen = (read_ooblen < dev->oob_per_page ? read_ooblen : dev->oob_per_page);
if (read_ooblen < dev->oob_per_page)
memcpy(ops->oobbuf + ops->oobretlen, dev->pad_oob, ooblen);
ops->oobretlen += ooblen;
}
/*
* Copy the in-band data from the internal buffer, to the user buffer,
* if the internal buffer was used for the read.
*/
static void
qpic_nand_read_datcopy(struct mtd_info *mtd,
struct mtd_oob_ops *ops, uint32_t col)
{
size_t datlen;
size_t read_datlen;
struct qpic_nand_dev *dev = MTD_QPIC_NAND_DEV(mtd);
if (ops->datbuf == NULL)
return;
read_datlen = ops->len - ops->retlen;
#ifdef CONFIG_PAGE_SCOPE_MULTI_PAGE_READ
if (dev->multi_page_copy) {
datlen = (mtd->writesize * dev->multi_page_req_len);
dev->multi_page_copy = false;
} else if (col == 0 && read_datlen >= mtd->writesize) {
datlen = mtd->writesize;
} else {
datlen = min(read_datlen, mtd->writesize - col);
memcpy(ops->datbuf + ops->retlen, dev->pad_dat + col, datlen);
}
#else
if (col == 0 && read_datlen >= mtd->writesize) {
datlen = mtd->writesize;
} else {
datlen = min(read_datlen, mtd->writesize - col);
memcpy(ops->datbuf + ops->retlen, dev->pad_dat + col, datlen);
}
#endif
ops->retlen += datlen;
}
static int
qpic_nand_check_erased_buf(unsigned char *buf, int len, int bitflips_threshold)
{
int bitflips = 0;
for (; len > 0; len--, buf++) {
bitflips += 8 - hweight8(*buf);
if (unlikely(bitflips > bitflips_threshold))
return -EBADMSG;
}
return bitflips;
}
/*
* Now following logic is being added to identify the erased codeword
* bitflips.
* 1. Maintain the bitmasks for the codewords which generated uncorrectable
* error.
* 2. Read the raw data again in temp buffer and count the number of zeros.
* Since spare bytes are unused in ECC layout and won’t affect ECC
* correctability so no need to count number of zero in spare bytes.
* 3. If the number of zero is below ECC correctability then it can be
* treated as erased CW. In this case, make all the data/oob of actual user
* buffers as 0xff.
*/
static int
qpic_nand_check_erased_page(struct mtd_info *mtd, uint32_t page,
unsigned char *datbuf,
unsigned char *oobbuf,
unsigned int uncorrectable_err_cws,
unsigned int *max_bitflips)
{
struct mtd_oob_ops raw_page_ops;
struct qpic_nand_dev *dev = MTD_QPIC_NAND_DEV(mtd);
unsigned char *tmp_datbuf;
unsigned int tmp_datasize, datasize, oobsize;
int i, start_cw, last_cw, ret, data_bitflips;
raw_page_ops.mode = MTD_OPS_RAW;
raw_page_ops.len = mtd->writesize;
raw_page_ops.ooblen = mtd->oobsize;
raw_page_ops.datbuf = dev->tmp_datbuf;
raw_page_ops.oobbuf = dev->tmp_oobbuf;
raw_page_ops.retlen = 0;
raw_page_ops.oobretlen = 0;
ret = qpic_nand_read_page(mtd, page, NAND_CFG_RAW, &raw_page_ops);
if (ret)
return ret;
start_cw = ffs(uncorrectable_err_cws) - 1;
last_cw = fls(uncorrectable_err_cws);
tmp_datbuf = dev->tmp_datbuf + start_cw * dev->cw_size;
tmp_datasize = dev->cw_size - dev->spare_bytes;
datasize = DATA_BYTES_IN_IMG_PER_CW;
datbuf += start_cw * datasize;
for (i = start_cw; i < last_cw;
i++, datbuf += datasize, tmp_datbuf += dev->cw_size) {
if (!(BIT(i) & uncorrectable_err_cws))
continue;
data_bitflips =
qpic_nand_check_erased_buf(tmp_datbuf, tmp_datasize,
mtd->ecc_strength);
if (data_bitflips < 0) {
mtd->ecc_stats.failed++;
continue;
}
*max_bitflips =
max_t(unsigned int, *max_bitflips, data_bitflips);
if (i == dev->cws_per_page - 1) {
oobsize = dev->cws_per_page << 2;
datasize = DATA_BYTES_IN_IMG_PER_CW - oobsize;
if (oobbuf)
memset(oobbuf, 0xff, oobsize);
}
if (datbuf)
memset(datbuf, 0xff, datasize);
}
return 0;
}
static int
qpic_nand_read_page(struct mtd_info *mtd, uint32_t page,
enum nand_cfg_value cfg_mode,
struct mtd_oob_ops *ops)
{
struct qpic_nand_dev *dev = MTD_QPIC_NAND_DEV(mtd);
struct cfg_params params;
uint32_t ecc;
struct read_stats *stats = dev->stats;
uint32_t addr_loc_0;
uint32_t addr_loc_1;
struct cmd_element *cmd_list_ptr = ce_array;
struct cmd_element *cmd_list_ptr_start = ce_array;
uint32_t num_cmd_desc = 0;
uint32_t num_data_desc = 0;
uint32_t i;
int nand_ret = NANDC_RESULT_SUCCESS;
uint8_t flags = 0;
uint32_t *cmd_list_temp = NULL;
uint16_t data_bytes;
uint16_t ud_bytes_in_last_cw;
uint16_t oob_bytes;
unsigned char *buffer, *ops_datbuf = ops->datbuf;
unsigned char *spareaddr, *ops_oobbuf = ops->oobbuf;
unsigned char *buffer_st, *spareaddr_st;
unsigned int max_bitflips = 0, uncorrectable_err_cws = 0;
/* Check This address for serial NAND later on if any issue
* Because as per HPG Page Read 0x13 NAND_ADDR1[7:0]
* NAND_ADDR0[31:24] NAND_ADDR0[23:16]
*/
params.addr0 = page << 16;
params.addr1 = (page >> 16) & 0xff;
if (cfg_mode == NAND_CFG_RAW) {
params.cfg0 = dev->cfg0_raw;
params.cfg1 = dev->cfg1_raw;
params.cmd = NAND_CMD_PAGE_READ;
ecc = 0x1; /* Disable ECC */
#ifdef CONFIG_QPIC_SERIAL
if (dev->quad_mode)
params.cmd |= QPIC_SPI_TRANSFER_MODE_X4;
else
params.cmd |= QPIC_SPI_TRANSFER_MODE_X1;
params.cmd |= (QPIC_SPI_WP_SET | QPIC_SPI_HOLD_SET);
#endif
data_bytes = dev->cw_size;
oob_bytes = mtd->oobsize;
ud_bytes_in_last_cw = (dev->cw_size - mtd->oobsize);
} else {
params.cfg0 = dev->cfg0;
params.cfg1 = dev->cfg1;
params.cmd = NAND_CMD_PAGE_READ_ALL;
#ifdef CONFIG_QPIC_SERIAL
if (dev->quad_mode)
params.cmd |= QPIC_SPI_TRANSFER_MODE_X4;
else
params.cmd |= QPIC_SPI_TRANSFER_MODE_X1;
params.cmd |= (QPIC_SPI_WP_SET | QPIC_SPI_HOLD_SET);
#endif
ecc = (dev->ecc_bch_cfg);
data_bytes = DATA_BYTES_IN_IMG_PER_CW;
ud_bytes_in_last_cw = USER_DATA_BYTES_PER_CW -
(((dev->cws_per_page) - 1) << 2);
oob_bytes = DATA_BYTES_IN_IMG_PER_CW - ud_bytes_in_last_cw;
}
params.exec = 1;
/* Read all the Data bytes in the first 3 CWs. */
addr_loc_0 = NAND_RD_LOC_OFFSET(0);
addr_loc_0 |= NAND_RD_LOC_SIZE(data_bytes);;
addr_loc_0 |= NAND_RD_LOC_LAST_BIT(1);
addr_loc_1 = NAND_RD_LOC_OFFSET(ud_bytes_in_last_cw);
addr_loc_1 |= NAND_RD_LOC_SIZE(oob_bytes);
addr_loc_1 |= NAND_RD_LOC_LAST_BIT(1);
/* Reset and Configure erased CW/page detection controller */
qpic_nand_erased_status_reset(ce_array, BAM_DESC_LOCK_FLAG);
if (ops->datbuf == NULL) {
buffer = dev->pad_dat;
} else {
buffer = ops->datbuf;
}
if (ops->oobbuf == NULL) {
spareaddr = dev->pad_oob;
} else {
spareaddr = ops->oobbuf;
}
buffer_st = buffer;
spareaddr_st = spareaddr;
/* Queue up the command and data descriptors for all the codewords in a page
* and do a single bam transfer at the end.*/
for (i = 0; i < (dev->cws_per_page); i++) {
num_cmd_desc = 0;
num_data_desc = 0;
if (i == 0) {
cmd_list_ptr = qpic_nand_add_addr_n_cfg_ce(&params, cmd_list_ptr);
bam_add_cmd_element(cmd_list_ptr, NAND_DEV0_ECC_CFG,(uint32_t)ecc,
CE_WRITE_TYPE);
cmd_list_ptr++;
} else
cmd_list_ptr_start = cmd_list_ptr;
bam_add_cmd_element(cmd_list_ptr, NAND_FLASH_CMD, (uint32_t)params.cmd,
CE_WRITE_TYPE);
cmd_list_ptr++;
if (i == (dev->cws_per_page) - 1) {
/* Write addr loc 1 only for the last CW. */
addr_loc_0 = NAND_RD_LOC_OFFSET(0);
addr_loc_0 |= NAND_RD_LOC_SIZE(ud_bytes_in_last_cw);
addr_loc_0 |= NAND_RD_LOC_LAST_BIT(0);
#ifdef CONFIG_QPIC_SERIAL
/*To read only spare bytes 80 0r 16*/
bam_add_cmd_element(cmd_list_ptr, NAND_READ_LOCATION_LAST_CW_n(1),
(uint32_t)addr_loc_1, CE_WRITE_TYPE);
#else
bam_add_cmd_element(cmd_list_ptr, NAND_READ_LOCATION_n(1),
(uint32_t)addr_loc_1, CE_WRITE_TYPE);
#endif
cmd_list_ptr++;
flags = 0;
/* Add Data desc */
bam_add_one_desc(&bam, DATA_PRODUCER_PIPE_INDEX,
(unsigned char *)((addr_t)(buffer)),
ud_bytes_in_last_cw,
flags);
num_data_desc++;
bam_add_one_desc(&bam,
DATA_PRODUCER_PIPE_INDEX,
(unsigned char *)((addr_t)(spareaddr)),
oob_bytes,
BAM_DESC_INT_FLAG);
num_data_desc++;
bam_sys_gen_event(&bam, DATA_PRODUCER_PIPE_INDEX,
num_data_desc);
} else {
/* Add Data desc */
bam_add_one_desc(&bam,
DATA_PRODUCER_PIPE_INDEX,
(unsigned char *)((addr_t)buffer),
data_bytes,
0);
num_data_desc++;
bam_sys_gen_event(&bam, DATA_PRODUCER_PIPE_INDEX,
num_data_desc);
}
#ifdef CONFIG_QPIC_SERIAL
if (i == (dev->cws_per_page) - 1)
bam_add_cmd_element(cmd_list_ptr,
NAND_READ_LOCATION_LAST_CW_n(0),
(uint32_t)addr_loc_0,
CE_WRITE_TYPE);
else
bam_add_cmd_element(cmd_list_ptr,
NAND_READ_LOCATION_n(0),
(uint32_t)addr_loc_0,
CE_WRITE_TYPE);
#else
bam_add_cmd_element(cmd_list_ptr,
NAND_READ_LOCATION_n(0),
(uint32_t)addr_loc_0,
CE_WRITE_TYPE);
#endif
cmd_list_ptr++;
bam_add_cmd_element(cmd_list_ptr,
NAND_EXEC_CMD,
(uint32_t)params.exec,
CE_WRITE_TYPE);
cmd_list_ptr++;
/* Enqueue the desc for the above commands */
bam_add_one_desc(&bam,
CMD_PIPE_INDEX,
(unsigned char*)cmd_list_ptr_start,
((uint32_t)cmd_list_ptr -
(uint32_t)cmd_list_ptr_start),
BAM_DESC_NWD_FLAG | BAM_DESC_CMD_FLAG);
num_cmd_desc++;
bam_add_cmd_element(cmd_list_ptr, NAND_FLASH_STATUS,
(uint32_t)((addr_t)&(stats[i].flash_sts)),
CE_READ_TYPE);
cmd_list_temp = (uint32_t *)cmd_list_ptr;
cmd_list_ptr++;
bam_add_cmd_element(cmd_list_ptr, NAND_BUFFER_STATUS,
(uint32_t)((addr_t)&(stats[i].buffer_sts)),
CE_READ_TYPE);
cmd_list_ptr++;
bam_add_cmd_element(cmd_list_ptr, NAND_ERASED_CW_DETECT_STATUS,
(uint32_t)((addr_t)&(stats[i].erased_cw_sts)),
CE_READ_TYPE);
cmd_list_ptr++;
if (i == (dev->cws_per_page) - 1) {
flags = BAM_DESC_CMD_FLAG | BAM_DESC_UNLOCK_FLAG;
} else
flags = BAM_DESC_CMD_FLAG;
/* Enqueue the desc for the above command */
bam_add_one_desc(&bam,
CMD_PIPE_INDEX,
(unsigned char*)((addr_t)cmd_list_temp),
((uint32_t)cmd_list_ptr - (uint32_t)cmd_list_temp),
flags);
num_cmd_desc++;
if (ops->datbuf != NULL) {
if (i == (dev->cws_per_page - 1)) {
buffer += ud_bytes_in_last_cw;
ops->datbuf += ud_bytes_in_last_cw;
ops->retlen += ud_bytes_in_last_cw;
} else {
buffer = ops->datbuf + data_bytes;
ops->datbuf += data_bytes;
ops->retlen += data_bytes;
}
}
else {
if (i == (dev->cws_per_page - 1)) {
buffer += ud_bytes_in_last_cw;
} else {
buffer += data_bytes;
}
}
if ((i == (dev->cws_per_page) - 1)) {
if (ops->oobbuf != NULL) {
spareaddr += oob_bytes;
ops->oobretlen += oob_bytes;
ops->oobbuf += oob_bytes;
} else
spareaddr += oob_bytes;
}
/* Notify BAM HW about the newly added descriptors */
bam_sys_gen_event(&bam, CMD_PIPE_INDEX, num_cmd_desc);
}
qpic_nand_wait_for_data(DATA_PRODUCER_PIPE_INDEX);
#if !defined(CONFIG_SYS_DCACHE_OFF)
flush_dcache_range((unsigned long)stats,
(unsigned long)stats +
(QPIC_NAND_MAX_CWS_IN_PAGE * sizeof(*stats)));
flush_dcache_range((unsigned long)buffer_sts,
(unsigned long)buffer_sts + sizeof(buffer_sts));
flush_dcache_range((unsigned long)buffer_st,
(unsigned long)buffer);
flush_dcache_range((unsigned long)spareaddr_st,
(unsigned long)spareaddr);
#endif
/* Check status */
for (i = 0; i < (dev->cws_per_page) ; i ++) {
if (cfg_mode == NAND_CFG_RAW)
nand_ret = qpic_nand_check_status(mtd,
stats[i].flash_sts);
else
nand_ret = qpic_nand_check_read_status(mtd, &stats[i]);
if (nand_ret < 0) {
if (nand_ret == -EBADMSG) {
uncorrectable_err_cws |= BIT(i);
continue;
}
goto qpic_nand_read_page_error;
}
max_bitflips = max_t(unsigned int, max_bitflips, nand_ret);
}
if (uncorrectable_err_cws) {
nand_ret = qpic_nand_check_erased_page(mtd, page, ops_datbuf,
ops_oobbuf,
uncorrectable_err_cws,
&max_bitflips);
if (nand_ret < 0)
goto qpic_nand_read_page_error;
}
return max_bitflips;
qpic_nand_read_page_error:
printf("NAND page read failed. page: %x status %x\n",
page, nand_ret);
return nand_ret;
}
#ifdef CONFIG_PAGE_SCOPE_MULTI_PAGE_READ
static int qpic_nand_multi_page_read(struct mtd_info *mtd, uint32_t page,
enum nand_cfg_value cfg_mode, struct mtd_oob_ops *ops,
uint32_t num_pages)
{
struct qpic_nand_dev *dev = MTD_QPIC_NAND_DEV(mtd);
struct cfg_params params;
struct cmd_element *cmd_list_ptr = ce_array;
struct cmd_element *cmd_list_ptr_start = ce_array;
struct read_stats *stats = dev->stats;
uint32_t auto_status = QPIC_SPI_NAND_AUTO_STATUS_VAL;
unsigned char *buffer, *ops_datbuf = ops->datbuf;
unsigned char *spareaddr, *ops_oobbuf = ops->oobbuf;
unsigned char *buffer_st, *spareaddr_st;
unsigned char *auto_status_buffer = NULL;
unsigned char *tmp_status_buffer = NULL;
uint16_t data_bytes;
uint16_t ud_bytes_in_last_cw;
uint16_t oob_bytes;
uint32_t addr_loc_0, addr_loc_1, addr_loc_last, ecc;
uint32_t num_data_desc = 0;
uint32_t num_status_desc = 0;
uint32_t i, j;
uint8_t flags = 0;
int nand_ret = NANDC_RESULT_SUCCESS;
unsigned int max_bitflips = 0, uncorrectable_err_cws = 0;
params.addr0 = page << 16;
params.addr1 = (page >> 16) & 0xff;
memset(dev->status_buff, 0, dev->status_buf_size);
auto_status_buffer = dev->status_buff;
tmp_status_buffer = dev->status_buff;
dev->multi_page_copy = true;
#ifdef CONFIG_QPIC_SERIAL
params.cmd = (QPIC_SPI_WP_SET | QPIC_SPI_HOLD_SET);
if (dev->quad_mode)
params.cmd |= QPIC_SPI_TRANSFER_MODE_X4;
else
params.cmd |= QPIC_SPI_TRANSFER_MODE_X1;
#endif
if (cfg_mode == NAND_CFG_RAW) {
params.cfg0 = dev->cfg0_raw;
params.cfg1 = dev->cfg1_raw;
params.cmd |= (NAND_CMD_PAGE_READ | QPIC_MULTIPAGE_CMD_EN);
ecc = 0x1; /* Disable ECC */
data_bytes = dev->cw_size;
oob_bytes = mtd->oobsize;
ud_bytes_in_last_cw = (dev->cw_size - mtd->oobsize);
} else {
params.cfg0 = dev->cfg0;
params.cfg1 = dev->cfg1;
params.cmd |= (NAND_CMD_PAGE_READ_ALL | QPIC_MULTIPAGE_CMD_EN);
ecc = (dev->ecc_bch_cfg);
data_bytes = DATA_BYTES_IN_IMG_PER_CW;
ud_bytes_in_last_cw = USER_DATA_BYTES_PER_CW -
(((dev->cws_per_page) - 1) << 2);
oob_bytes = DATA_BYTES_IN_IMG_PER_CW - ud_bytes_in_last_cw;
}
params.exec = 1;
addr_loc_0 = NAND_RD_LOC_OFFSET(0);
addr_loc_0 |= NAND_RD_LOC_SIZE(data_bytes);;
addr_loc_0 |= NAND_RD_LOC_LAST_BIT(1);
addr_loc_1 = NAND_RD_LOC_OFFSET(ud_bytes_in_last_cw);
addr_loc_1 |= NAND_RD_LOC_SIZE(oob_bytes);
addr_loc_1 |= NAND_RD_LOC_LAST_BIT(1);
addr_loc_last = NAND_RD_LOC_OFFSET(0);
addr_loc_last |= NAND_RD_LOC_SIZE(ud_bytes_in_last_cw);
addr_loc_last |= NAND_RD_LOC_LAST_BIT(0);
/* reset address reg before executing for
* next multi page read
*/
reset_addr_reg(ce_array, 0);
/* reset multi_page_cmd_reg */
reset_multi_page_cmd_reg(ce_array, 0);
/* Reset and Configure erased CW/page detection controller */
qpic_nand_erased_status_reset(ce_array, BAM_DESC_LOCK_FLAG);
if (ops->datbuf == NULL) {
buffer = dev->pad_dat;
} else {
buffer = ops->datbuf;
}
if (ops->oobbuf == NULL) {
spareaddr = dev->pad_oob;
} else {
spareaddr = ops->oobbuf;
}
buffer_st = buffer;
spareaddr_st = spareaddr;
cmd_list_ptr = qpic_nand_add_addr_n_cfg_ce(&params, cmd_list_ptr);
bam_add_cmd_element(cmd_list_ptr, NAND_DEV0_ECC_CFG, (uint32_t)ecc,
CE_WRITE_TYPE);
cmd_list_ptr++;
bam_add_cmd_element(cmd_list_ptr, NAND_AUTO_STATUS_EN, (uint32_t)auto_status,
CE_WRITE_TYPE);
cmd_list_ptr++;
bam_add_cmd_element(cmd_list_ptr, NAND_MULTI_PAGE_CMD, (uint32_t)num_pages - 1,
CE_WRITE_TYPE);
cmd_list_ptr++;
/* Enqueue the desc for the above commands */
bam_add_one_desc(&bam, CMD_PIPE_INDEX, (unsigned char*)cmd_list_ptr_start,
((uint32_t)cmd_list_ptr - (uint32_t)cmd_list_ptr_start),
BAM_DESC_CMD_FLAG);
bam_sys_gen_event(&bam, CMD_PIPE_INDEX, 1);
/* Queue up the command and data descriptors for all the requested page
* and do a single bam transfer at the end.*/
for (j = 0; j < num_pages; j++) {
for (i = 0; i < (dev->cws_per_page); i++) {
num_data_desc = 0;
num_status_desc = 0;
if (i == (dev->cws_per_page) - 1) {
if ( j == num_pages - 1) {
flags = BAM_DESC_INT_FLAG;
} else {
flags = 0;
}
/* Add Data desc */
bam_add_one_desc(&bam, DATA_PRODUCER_PIPE_INDEX,
(unsigned char *)((addr_t)(buffer)),
ud_bytes_in_last_cw,
0);
num_data_desc++;
bam_add_one_desc(&bam,
DATA_PRODUCER_PIPE_INDEX,
(unsigned char *)((addr_t)(spareaddr)),
oob_bytes,
flags);
num_data_desc++;
/* add data descriptor to read status */
bam_add_one_desc(&bam,
BAM_STATUS_PIPE_INDEX,
(unsigned char *)(addr_t)
(auto_status_buffer),
QPIC_AUTO_STATUS_DES_SIZE,
flags);
num_status_desc++;
bam_sys_gen_event(&bam, DATA_PRODUCER_PIPE_INDEX,
num_data_desc);
bam_sys_gen_event(&bam, BAM_STATUS_PIPE_INDEX,
num_status_desc);
} else {
/* Add Data desc */
bam_add_one_desc(&bam,
DATA_PRODUCER_PIPE_INDEX,
(unsigned char *)((addr_t)buffer),
data_bytes,
0);
num_data_desc++;
/* add data descriptor to read status */
bam_add_one_desc(&bam,
BAM_STATUS_PIPE_INDEX,
(unsigned char *)(addr_t)
(auto_status_buffer),
QPIC_AUTO_STATUS_DES_SIZE,
0);
num_status_desc++;
bam_sys_gen_event(&bam, DATA_PRODUCER_PIPE_INDEX,
num_data_desc);
bam_sys_gen_event(&bam, BAM_STATUS_PIPE_INDEX,
num_status_desc);
}
if (ops->datbuf != NULL) {
if (i == (dev->cws_per_page - 1)) {
buffer += ud_bytes_in_last_cw;
ops->datbuf += ud_bytes_in_last_cw;
ops->retlen += ud_bytes_in_last_cw;
} else {
buffer = ops->datbuf + data_bytes;
ops->datbuf += data_bytes;
ops->retlen += data_bytes;
}
}
else {
if (i == (dev->cws_per_page - 1)) {
buffer += ud_bytes_in_last_cw;
} else {
buffer += data_bytes;
}
}
if ((i == (dev->cws_per_page) - 1)) {
if (ops->oobbuf != NULL) {
spareaddr += oob_bytes;
ops->oobretlen += oob_bytes;
ops->oobbuf += oob_bytes;
} else
spareaddr += oob_bytes;
}
auto_status_buffer += QPIC_AUTO_STATUS_DES_SIZE;
}
}
cmd_list_ptr = cmd_list_ptr_start;
bam_add_cmd_element(cmd_list_ptr, NAND_READ_LOCATION_n(0), (uint32_t)addr_loc_0,
CE_WRITE_TYPE);
cmd_list_ptr++;
bam_add_cmd_element(cmd_list_ptr, NAND_READ_LOCATION_LAST_CW_n(0),
(uint32_t)addr_loc_last, CE_WRITE_TYPE);
cmd_list_ptr++;
/*To read only spare bytes 80 0r 16*/
bam_add_cmd_element(cmd_list_ptr, NAND_READ_LOCATION_LAST_CW_n(1),
(uint32_t)addr_loc_1, CE_WRITE_TYPE);
cmd_list_ptr++;
bam_add_cmd_element(cmd_list_ptr, NAND_FLASH_CMD, (uint32_t)params.cmd,
CE_WRITE_TYPE);
cmd_list_ptr++;
bam_add_cmd_element(cmd_list_ptr, NAND_EXEC_CMD, (uint32_t)params.exec,
CE_WRITE_TYPE);
cmd_list_ptr++;
/* Enqueue the desc for the above commands */
bam_add_one_desc(&bam, CMD_PIPE_INDEX, (unsigned char*)cmd_list_ptr_start,
((uint32_t)cmd_list_ptr - (uint32_t)cmd_list_ptr_start),
BAM_DESC_CMD_FLAG | BAM_DESC_NWD_FLAG);
/* Notify BAM HW about the newly added descriptors */
bam_sys_gen_event(&bam, CMD_PIPE_INDEX, 1);
qpic_nand_wait_for_data(DATA_PRODUCER_PIPE_INDEX);
qpic_nand_wait_for_data(BAM_STATUS_PIPE_INDEX);
#if !defined(CONFIG_SYS_DCACHE_OFF)
flush_dcache_range((unsigned long)dev->status_buff,
(unsigned long)dev->status_buff +
dev->status_buf_size);
flush_dcache_range((unsigned long)buffer_st,
(unsigned long)buffer);
flush_dcache_range((unsigned long)spareaddr_st,
(unsigned long)spareaddr);
#endif
/* Update the auto status structure */
for (j =0; j < num_pages; j++) {
for (i = 0; i < (dev->cws_per_page); i++) {
memscpy(&stats[i].flash_sts, 4, tmp_status_buffer, 4);
memscpy(&stats[i].buffer_sts, 4, tmp_status_buffer + 4, 4);
memscpy(&stats[i].erased_cw_sts, 4, tmp_status_buffer + 8, 4);
/* Check status */
if (cfg_mode == NAND_CFG_RAW)
nand_ret = qpic_nand_check_status(mtd, stats[i].flash_sts);
else
nand_ret = qpic_nand_check_read_status(mtd, &stats[i]);
if (nand_ret < 0) {
if (nand_ret == -EBADMSG) {
uncorrectable_err_cws |= BIT(i);
continue;
}
goto qpic_nand_read_page_error;
}
max_bitflips = max_t(unsigned int, max_bitflips, nand_ret);
tmp_status_buffer += QPIC_SPI_MAX_STATUS_REG;
}
if (uncorrectable_err_cws) {
nand_ret = qpic_nand_check_erased_page(mtd, page + j, (ops_datbuf + (j * mtd->writesize)),
ops_oobbuf,
uncorrectable_err_cws,
&max_bitflips);
if (nand_ret < 0)
goto qpic_nand_read_page_error;
}
}
return max_bitflips;
qpic_nand_read_page_error:
printf("NAND page read failed. page: %x status %x\n",
page, nand_ret);
return nand_ret;
}
static int qpic_nand_page_scope_read(struct mtd_info *mtd, uint32_t page,
enum nand_cfg_value cfg_mode, struct mtd_oob_ops *ops)
{
struct qpic_nand_dev *dev = MTD_QPIC_NAND_DEV(mtd);
struct cfg_params params;
struct cmd_element *cmd_list_ptr = ce_array;
struct cmd_element *cmd_list_ptr_start = ce_array;
struct read_stats *stats = dev->stats;
uint32_t auto_status = QPIC_SPI_NAND_AUTO_STATUS_VAL;
unsigned char *buffer, *ops_datbuf = ops->datbuf;
unsigned char *spareaddr, *ops_oobbuf = ops->oobbuf;
unsigned char *buffer_st, *spareaddr_st;
unsigned char *auto_status_buffer = NULL;
uint16_t data_bytes;
uint16_t ud_bytes_in_last_cw;
uint16_t oob_bytes;
uint32_t addr_loc_0, addr_loc_1, ecc;
uint32_t num_cmd_desc = 0;
uint32_t num_data_desc = 0;
uint32_t num_status_desc = 0;
uint32_t i;
uint32_t parse_size = 0x0;
uint8_t flags = 0;
int nand_ret = NANDC_RESULT_SUCCESS;
unsigned int max_bitflips = 0, uncorrectable_err_cws = 0;
params.addr0 = page << 16;
params.addr1 = (page >> 16) & 0xff;
memset(dev->status_buff, 0, dev->status_buf_size);
auto_status_buffer = dev->status_buff;
#ifdef CONFIG_QPIC_SERIAL
params.cmd = (QPIC_SPI_WP_SET | QPIC_SPI_HOLD_SET);
if (dev->quad_mode)
params.cmd |= QPIC_SPI_TRANSFER_MODE_X4;
else
params.cmd |= QPIC_SPI_TRANSFER_MODE_X1;
#endif
if (cfg_mode == NAND_CFG_RAW) {
params.cfg0 = dev->cfg0_raw;
params.cfg1 = dev->cfg1_raw;
params.cmd |= (NAND_CMD_PAGE_READ | QPIC_PAGE_SCOPE_CMD_EN);
ecc = 0x1; /* Disable ECC */
data_bytes = dev->cw_size;
oob_bytes = mtd->oobsize;
ud_bytes_in_last_cw = (dev->cw_size - mtd->oobsize);
} else {
params.cfg0 = dev->cfg0;
params.cfg1 = dev->cfg1;
params.cmd |= (NAND_CMD_PAGE_READ_ALL | QPIC_PAGE_SCOPE_CMD_EN);
ecc = (dev->ecc_bch_cfg);
data_bytes = DATA_BYTES_IN_IMG_PER_CW;
ud_bytes_in_last_cw = USER_DATA_BYTES_PER_CW -
(((dev->cws_per_page) - 1) << 2);
oob_bytes = DATA_BYTES_IN_IMG_PER_CW - ud_bytes_in_last_cw;
}
params.exec = 1;
addr_loc_0 = NAND_RD_LOC_OFFSET(0);
addr_loc_0 |= NAND_RD_LOC_SIZE(data_bytes);;
addr_loc_0 |= NAND_RD_LOC_LAST_BIT(1);
addr_loc_1 = NAND_RD_LOC_OFFSET(ud_bytes_in_last_cw);
addr_loc_1 |= NAND_RD_LOC_SIZE(oob_bytes);
addr_loc_1 |= NAND_RD_LOC_LAST_BIT(1);
/* Reset and Configure erased CW/page detection controller */
qpic_nand_erased_status_reset(ce_array, BAM_DESC_LOCK_FLAG);
if (ops->datbuf == NULL) {
buffer = dev->pad_dat;
} else {
buffer = ops->datbuf;
}
if (ops->oobbuf == NULL) {
spareaddr = dev->pad_oob;
} else {
spareaddr = ops->oobbuf;
}
buffer_st = buffer;
spareaddr_st = spareaddr;
/* Queue up the command and data descriptors for all the codewords in a page
* and do a single bam transfer at the end.*/
for (i = 0; i < (dev->cws_per_page); i++) {
num_cmd_desc = 0;
num_data_desc = 0;
num_status_desc = 0;
if (i == 0) {
cmd_list_ptr = qpic_nand_add_addr_n_cfg_ce(&params, cmd_list_ptr);
bam_add_cmd_element(cmd_list_ptr, NAND_DEV0_ECC_CFG,(uint32_t)ecc,
CE_WRITE_TYPE);
cmd_list_ptr++;
bam_add_cmd_element(cmd_list_ptr, NAND_AUTO_STATUS_EN,(uint32_t)auto_status,
CE_WRITE_TYPE);
cmd_list_ptr++;
bam_add_cmd_element(cmd_list_ptr, NAND_FLASH_CMD, (uint32_t)params.cmd,
CE_WRITE_TYPE);
cmd_list_ptr++;
} else
cmd_list_ptr_start = cmd_list_ptr;
if (i == (dev->cws_per_page) - 1) {
/* Write addr loc 1 only for the last CW. */
addr_loc_0 = NAND_RD_LOC_OFFSET(0);
addr_loc_0 |= NAND_RD_LOC_SIZE(ud_bytes_in_last_cw);
addr_loc_0 |= NAND_RD_LOC_LAST_BIT(0);
/*To read only spare bytes 80 0r 16*/
bam_add_cmd_element(cmd_list_ptr, NAND_READ_LOCATION_LAST_CW_n(1),
(uint32_t)addr_loc_1, CE_WRITE_TYPE);
cmd_list_ptr++;
/* Add Data desc */
bam_add_one_desc(&bam, DATA_PRODUCER_PIPE_INDEX,
(unsigned char *)((addr_t)(buffer)),
ud_bytes_in_last_cw,
0);
num_data_desc++;
bam_add_one_desc(&bam,
DATA_PRODUCER_PIPE_INDEX,
(unsigned char *)((addr_t)(spareaddr)),
oob_bytes,
BAM_DESC_INT_FLAG);
num_data_desc++;
/* add data descriptor to read status */
bam_add_one_desc(&bam,
BAM_STATUS_PIPE_INDEX,
(unsigned char *)((addr_t)(auto_status_buffer +
i * QPIC_SPI_MAX_STATUS_REG)),
QPIC_AUTO_STATUS_DES_SIZE,
BAM_DESC_INT_FLAG);
num_status_desc++;
bam_sys_gen_event(&bam, DATA_PRODUCER_PIPE_INDEX,
num_data_desc);
bam_sys_gen_event(&bam, BAM_STATUS_PIPE_INDEX,
num_status_desc);
} else {
/* Add Data desc */
bam_add_one_desc(&bam,
DATA_PRODUCER_PIPE_INDEX,
(unsigned char *)((addr_t)buffer),
data_bytes,
0);
num_data_desc++;
/* add data descriptor to read status */
bam_add_one_desc(&bam,
BAM_STATUS_PIPE_INDEX,
(unsigned char *)((addr_t)(auto_status_buffer +
i * QPIC_SPI_MAX_STATUS_REG)),
QPIC_AUTO_STATUS_DES_SIZE,
0);
num_status_desc++;
bam_sys_gen_event(&bam, DATA_PRODUCER_PIPE_INDEX,
num_data_desc);
bam_sys_gen_event(&bam, BAM_STATUS_PIPE_INDEX,
num_status_desc);
}
if (i == (dev->cws_per_page) - 1) {
bam_add_cmd_element(cmd_list_ptr,
NAND_READ_LOCATION_LAST_CW_n(0),
(uint32_t)addr_loc_0,
CE_WRITE_TYPE);
cmd_list_ptr++;
bam_add_cmd_element(cmd_list_ptr, NAND_EXEC_CMD,
(uint32_t)params.exec, CE_WRITE_TYPE);
cmd_list_ptr++;
} else {
bam_add_cmd_element(cmd_list_ptr,
NAND_READ_LOCATION_n(0),
(uint32_t)addr_loc_0,
CE_WRITE_TYPE);
cmd_list_ptr++;
}
if (i == (dev->cws_per_page) - 1) {
flags = BAM_DESC_CMD_FLAG | BAM_DESC_NWD_FLAG;
} else
flags = BAM_DESC_CMD_FLAG;
/* Enqueue the desc for the above commands */
bam_add_one_desc(&bam,
CMD_PIPE_INDEX,
(unsigned char*)cmd_list_ptr_start,
((uint32_t)cmd_list_ptr -
(uint32_t)cmd_list_ptr_start),
flags);
num_cmd_desc++;
if (ops->datbuf != NULL) {
if (i == (dev->cws_per_page - 1)) {
buffer += ud_bytes_in_last_cw;
ops->datbuf += ud_bytes_in_last_cw;
ops->retlen += ud_bytes_in_last_cw;
} else {
buffer = ops->datbuf + data_bytes;
ops->datbuf += data_bytes;
ops->retlen += data_bytes;
}
}
else {
if (i == (dev->cws_per_page - 1)) {
buffer += ud_bytes_in_last_cw;
} else {
buffer += data_bytes;
}
}
if ((i == (dev->cws_per_page) - 1)) {
if (ops->oobbuf != NULL) {
spareaddr += oob_bytes;
ops->oobretlen += oob_bytes;
ops->oobbuf += oob_bytes;
} else
spareaddr += oob_bytes;
}
/* Notify BAM HW about the newly added descriptors */
bam_sys_gen_event(&bam, CMD_PIPE_INDEX, num_cmd_desc);
}
qpic_nand_wait_for_data(BAM_STATUS_PIPE_INDEX);
qpic_nand_wait_for_data(DATA_PRODUCER_PIPE_INDEX);
GET_STATUS_BUFF_PARSE_SIZE_PER_PAGE(mtd->writesize, parse_size);
#if !defined(CONFIG_SYS_DCACHE_OFF)
flush_dcache_range((unsigned long)dev->status_buff,
(unsigned long)dev->status_buff + parse_size);
flush_dcache_range((unsigned long)buffer_st,
(unsigned long)buffer);
flush_dcache_range((unsigned long)spareaddr_st,
(unsigned long)spareaddr);
#endif
/* Update the auto status structure */
for (i = 0; i < (dev->cws_per_page); i++) {
memscpy(&stats[i].flash_sts, 4, (dev->status_buff +
i * QPIC_SPI_MAX_STATUS_REG),
sizeof(int));
memscpy(&stats[i].buffer_sts, 4, (dev->status_buff +
i * QPIC_SPI_MAX_STATUS_REG) + 4,
sizeof(int));
memscpy(&stats[i].erased_cw_sts, 4, (dev->status_buff +
i * QPIC_SPI_MAX_STATUS_REG) + 8,
sizeof(int));
}
/* Check status */
for (i = 0; i < (dev->cws_per_page) ; i ++) {
if (cfg_mode == NAND_CFG_RAW)
nand_ret = qpic_nand_check_status(mtd,
stats[i].flash_sts);
else
nand_ret = qpic_nand_check_read_status(mtd, &stats[i]);
if (nand_ret < 0) {
if (nand_ret == -EBADMSG) {
uncorrectable_err_cws |= BIT(i);
continue;
}
goto qpic_nand_read_page_error;
}
max_bitflips = max_t(unsigned int, max_bitflips, nand_ret);
}
if (uncorrectable_err_cws) {
nand_ret = qpic_nand_check_erased_page(mtd, page, ops_datbuf,
ops_oobbuf,
uncorrectable_err_cws,
&max_bitflips);
if (nand_ret < 0)
goto qpic_nand_read_page_error;
}
return max_bitflips;
qpic_nand_read_page_error:
printf("NAND page read failed. page: %x status %x\n",
page, nand_ret);
return nand_ret;
}
static int qpic_alloc_status_buff(struct qpic_nand_dev *dev,
struct mtd_info *mtd)
{
GET_STATUS_BUFF_ALLOC_SIZE(mtd->writesize,
dev->status_buf_size);
dev->status_buff = (unsigned char *)malloc(dev->status_buf_size);
if (!dev->status_buff)
return -ENOMEM;
memset(dev->status_buff, 0, dev->status_buf_size);
return 0;
}
static int qpic_nand_read_page_scope_multi_page(struct mtd_info *mtd,
loff_t to, struct mtd_oob_ops *ops)
{
uint32_t i = 0, ret = 0;
struct qpic_nand_dev *dev = MTD_QPIC_NAND_DEV(mtd);
struct nand_chip *chip = MTD_NAND_CHIP(mtd);
uint32_t start_page;
uint32_t num_pages, req_pages = 0x0;
uint32_t col;
enum nand_cfg_value cfg_mode;
unsigned int max_bitflips = 0;
unsigned int ecc_failures = mtd->ecc_stats.failed;
/* We don't support MTD_OOB_PLACE as of yet. */
if (ops->mode == MTD_OPS_PLACE_OOB)
return -ENOSYS;
/* Check for reads past end of device */
if (ops->datbuf && (to + ops->len) > mtd->size)
return -EINVAL;
if (ops->ooboffs != 0)
return -EINVAL;
if(ops->mode == MTD_OPS_RAW) {
cfg_mode = NAND_CFG_RAW;
dev->oob_per_page = mtd->oobsize;
} else {
cfg_mode = NAND_CFG;
dev->oob_per_page = mtd->oobavail;
}
start_page = ((to >> chip->page_shift));
num_pages = qpic_get_read_page_count(mtd, ops, to);
while (1) {
if (num_pages > MAX_MULTI_PAGE) {
req_pages = MAX_MULTI_PAGE;
} else if (num_pages > 1 && num_pages <= MAX_MULTI_PAGE) {
req_pages = num_pages;
} else if (num_pages == 1) {
req_pages = num_pages;
}
struct mtd_oob_ops page_ops;
col = i == 0 ? to & (mtd->writesize - 1) : 0;
page_ops.mode = ops->mode;
page_ops.len = mtd->writesize * req_pages;
page_ops.ooblen = dev->oob_per_page;
page_ops.datbuf = qpic_nand_read_datbuf(mtd, ops, col);
page_ops.oobbuf = qpic_nand_read_oobbuf(mtd, ops);
page_ops.retlen = 0;
page_ops.oobretlen = 0;
dev->multi_page_req_len = req_pages;
if (num_pages > 1)
ret = qpic_nand_multi_page_read(mtd, start_page,
cfg_mode, &page_ops, req_pages);
else
ret = qpic_nand_page_scope_read(mtd, start_page,
cfg_mode, &page_ops);
if (ret < 0) {
printf("%s: reading page %d failed with %d err\n",
__func__, start_page, ret);
return ret;
}
max_bitflips = max_t(unsigned int, max_bitflips, ret);
qpic_nand_read_datcopy(mtd, ops, col);
qpic_nand_read_oobcopy(mtd, ops);
num_pages -= req_pages;
i++;
if (!num_pages)
break;
start_page += req_pages;
}
if (ecc_failures != mtd->ecc_stats.failed) {
printf("%s: ecc failure while reading from %llx\n",
__func__, to);
return -EBADMSG;
}
return max_bitflips;
}
#endif
static int qpic_nand_read_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
{
uint32_t i = 0, ret = 0;
struct qpic_nand_dev *dev = MTD_QPIC_NAND_DEV(mtd);
struct nand_chip *chip = MTD_NAND_CHIP(mtd);
uint32_t start_page;
uint32_t num_pages;
uint32_t col;
enum nand_cfg_value cfg_mode;
unsigned int max_bitflips = 0;
unsigned int ecc_failures = mtd->ecc_stats.failed;
/* We don't support MTD_OOB_PLACE as of yet. */
if (ops->mode == MTD_OPS_PLACE_OOB)
return -ENOSYS;
/* Check for reads past end of device */
if (ops->datbuf && (to + ops->len) > mtd->size)
return -EINVAL;
if (ops->ooboffs != 0)
return -EINVAL;
if(ops->mode == MTD_OPS_RAW) {
cfg_mode = NAND_CFG_RAW;
dev->oob_per_page = mtd->oobsize;
} else {
cfg_mode = NAND_CFG;
dev->oob_per_page = mtd->oobavail;
}
start_page = ((to >> chip->page_shift));
num_pages = qpic_get_read_page_count(mtd, ops, to);
for (i = 0; i < num_pages; i++) {
struct mtd_oob_ops page_ops;
/*
* If start address is non page alinged then determine the
* column offset
*/
col = i == 0 ? to & (mtd->writesize - 1) : 0;
page_ops.mode = ops->mode;
page_ops.len = mtd->writesize;
page_ops.ooblen = dev->oob_per_page;
page_ops.datbuf = qpic_nand_read_datbuf(mtd, ops, col);
page_ops.oobbuf = qpic_nand_read_oobbuf(mtd, ops);
page_ops.retlen = 0;
page_ops.oobretlen = 0;
ret = qpic_nand_read_page(mtd, start_page + i, cfg_mode,
&page_ops);
if (ret < 0) {
printf("%s: reading page %d failed with %d err\n",
__func__, start_page + i, ret);
return ret;
}
max_bitflips = max_t(unsigned int, max_bitflips, ret);
qpic_nand_read_datcopy(mtd, ops, col);
qpic_nand_read_oobcopy(mtd, ops);
}
if (ecc_failures != mtd->ecc_stats.failed) {
printf("%s: ecc failure while reading from %llx\n",
__func__, to);
return -EBADMSG;
}
return max_bitflips;
}
/**
* qpic_nand_read() - read data
* @start_page: number of page to begin reading from
* @num_pages: number of pages to read
* @buffer: buffer where to store the read data
* @spareaddr: buffer where to store spare data.
* If null, spare data wont be read
*
* This function reads @num_pages starting from @start_page and stores the
* read data in buffer. Note that it's in the caller responsibility to make
* sure the read pages are all from same partition.
*
*/
static int qpic_nand_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, u_char *buf)
{
unsigned ret = 0;
struct mtd_oob_ops ops;
ops.mode = MTD_OPS_AUTO_OOB;
ops.len = len;
ops.retlen = 0;
ops.ooblen = 0;
ops.oobretlen = 0;
ops.ooboffs = 0;
ops.datbuf = (uint8_t *)buf;
ops.oobbuf = NULL;
#ifdef CONFIG_PAGE_SCOPE_MULTI_PAGE_READ
if (hw_ver >= QCA_QPIC_V2_1_1) {
ret = qpic_nand_read_page_scope_multi_page(mtd, from,
&ops);
} else {
printf("QPIC controller not support page scope and multi page read.\n");
return -EIO;
}
#else
ret = qpic_nand_read_oob(mtd, from, &ops);
#endif
*retlen = ops.retlen;
return ret;
}
/*
* Return the buffer containing the in-band data to be written.
*/
static uint8_t *qpic_nand_write_datbuf(struct mtd_info *mtd,
struct mtd_oob_ops *ops)
{
return ops->datbuf + ops->retlen;
}
/*
* Return the buffer containing the OOB data to be written. If user
* buffer does not provide on page worth of OOB data, return a padded
* internal buffer with the OOB data copied in.
*/
static uint8_t *qpic_nand_write_oobbuf(struct mtd_info *mtd,
struct mtd_oob_ops *ops)
{
size_t write_ooblen;
struct qpic_nand_dev *dev = MTD_QPIC_NAND_DEV(mtd);
memset(dev->pad_oob, 0xFF, dev->oob_per_page);
if (ops->oobbuf == NULL)
return dev->pad_oob;
write_ooblen = ops->ooblen - ops->oobretlen;
if (write_ooblen < dev->oob_per_page) {
memcpy(dev->pad_oob, ops->oobbuf + ops->oobretlen, write_ooblen);
return dev->pad_oob;
}
return ops->oobbuf + ops->oobretlen;
}
/*
* Increment the counters to indicate the no. of in-band bytes
* written.
*/
static void qpic_nand_write_datinc(struct mtd_info *mtd,
struct mtd_oob_ops *ops)
{
ops->retlen += mtd->writesize;
}
/*
* Increment the counters to indicate the no. of OOB bytes written.
*/
static void qpic_nand_write_oobinc(struct mtd_info *mtd,
struct mtd_oob_ops *ops)
{
size_t write_ooblen;
size_t ooblen;
struct qpic_nand_dev *dev = MTD_QPIC_NAND_DEV(mtd);
if (ops->oobbuf == NULL)
return;
write_ooblen = ops->ooblen - ops->oobretlen;
ooblen = (write_ooblen < dev->oob_per_page ? write_ooblen : dev->oob_per_page);
ops->oobretlen += ooblen;
}
static int qpic_nand_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
{
struct qpic_nand_dev *dev = MTD_QPIC_NAND_DEV(mtd);
int i, ret = NANDC_RESULT_SUCCESS;
struct nand_chip *chip = MTD_NAND_CHIP(mtd);
u_long start_page;
u_long num_pages;
enum nand_cfg_value cfg_mode;
/* We don't support MTD_OOB_PLACE as of yet. */
if (ops->mode == MTD_OPS_PLACE_OOB)
return -ENOSYS;
/* Check for writes past end of device. */
if ((to + ops->len) > mtd->size)
return -EINVAL;
if (to & (mtd->writesize - 1))
return -EINVAL;
if (ops->len & (mtd->writesize - 1))
return -EINVAL;
if (ops->ooboffs != 0)
return -EINVAL;
if (ops->datbuf == NULL)
return -EINVAL;
if(ops->mode == MTD_OPS_RAW) {
cfg_mode = NAND_CFG_RAW;
dev->oob_per_page = mtd->oobsize;
}
else {
cfg_mode = NAND_CFG;
dev->oob_per_page = mtd->oobavail;
}
start_page = (to >> chip->page_shift);
num_pages = ((ops->len) >> chip->page_shift);
ops->retlen = 0;
ops->oobretlen = 0;
for (i = 0; i < (int)num_pages; i++) {
struct mtd_oob_ops page_ops;
page_ops.mode = ops->mode;
page_ops.len = mtd->writesize;
page_ops.ooblen = dev->oob_per_page;
page_ops.datbuf = qpic_nand_write_datbuf(mtd,ops);
page_ops.oobbuf = qpic_nand_write_oobbuf(mtd, ops);
page_ops.retlen = 0;
page_ops.oobretlen = 0;
ret = qpic_nand_write_page(mtd, start_page + i,
cfg_mode, &page_ops);
if (ret) {
printf("flash_write: write failure @ page %ld, block %ld\n",
start_page + i,
(start_page + i) / (dev->num_pages_per_blk));
goto out;
} else {
qpic_nand_write_datinc(mtd, ops);
qpic_nand_write_oobinc(mtd, ops);
}
}
out:
return ret;
}
/**
* qpic_nand_write() - read data
* @start_page: number of page to begin writing to
* @num_pages: number of pages to write
* @buffer: buffer to be written
* @write_extra_bytes: true if spare data (ox 0xff) to be written
*
* This function writes @num_pages starting from @start_page. Note that it's
* in the caller responsibility to make sure the written pages are all from
* same partition.
*
*/
static int qpic_nand_write(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, const u_char *buf)
{
int ret = NANDC_RESULT_SUCCESS;
struct mtd_oob_ops ops;
if (!buf) {
printf("qpic_nand_write: buffer = null\n");
return NANDC_RESULT_PARAM_INVALID;
}
ops.mode = MTD_OPS_AUTO_OOB;
ops.len = len;
ops.retlen = 0;
ops.ooblen = 0;
ops.oobretlen = 0;
ops.ooboffs = 0;
ops.datbuf = (uint8_t *)buf;
ops.oobbuf = NULL;
ret = qpic_nand_write_oob(mtd, to, &ops);
*retlen = ops.retlen;
return ret;
}
/* Function to erase a block on the nand.
* page: Starting page address for the block.
*/
nand_result_t qpic_nand_blk_erase(struct mtd_info *mtd, uint32_t page)
{
struct cfg_params cfg;
struct cmd_element *cmd_list_ptr = ce_array;
struct cmd_element *cmd_list_read_ptr = ce_read_array;
struct cmd_element *cmd_list_ptr_start = ce_array;
struct cmd_element *cmd_list_read_ptr_start = ce_read_array;
uint32_t status;
int num_desc = 0;
struct qpic_nand_dev *dev = MTD_QPIC_NAND_DEV(mtd);
uint32_t blk_addr = page / (dev->num_pages_per_blk);
struct nand_chip *chip = MTD_NAND_CHIP(mtd);
/* Fill in params for the erase flash cmd */
cfg.addr0 = page;
cfg.addr1 = 0;
/* Clear CW_PER_PAGE in cfg0 */
cfg.cfg0 = dev->cfg0 & ~(7U << NAND_DEV0_CFG0_CW_PER_PAGE_SHIFT);
cfg.cfg1 = dev->cfg1;
cfg.cmd = NAND_CMD_BLOCK_ERASE;
#ifdef CONFIG_QPIC_SERIAL
/* For serial NAND devices the block erase sequence is
* Issue 06H (WRITE ENBALE command)
* Issue D8H (BLOCK ERASE command)
* Issue 0FH (GET FEATURES command to read the status register)
* But we have already mapped write enable command in register
* QPIC_FLASH_DEV_CMD7 so here no need to send this command manually
* once we will send block erase command then controller internally
* send write enable command
* similar for Get feature command, no neeed to send this command
* also manually controller will take care.
*
* NOTE: Initially we are disabling block protection, so no need
* to do it again here.
*/
cfg.addr0 = page << 16;
cfg.addr1 = (page >> 16) & 0xffff;
cfg.cmd = 0xA;
cfg.cmd |= (QPIC_SPI_WP_SET | QPIC_SPI_HOLD_SET |
QPIC_SPI_TRANSFER_MODE_X1);
#endif
cfg.exec = 1;
cmd_list_ptr = qpic_nand_add_cmd_ce(&cfg, cmd_list_ptr);
/* Enqueue the desc for the above commands */
bam_add_one_desc(&bam,
CMD_PIPE_INDEX,
(unsigned char*)cmd_list_ptr_start,
((uint32_t)cmd_list_ptr - (uint32_t)cmd_list_ptr_start),
BAM_DESC_NWD_FLAG | BAM_DESC_CMD_FLAG | BAM_DESC_INT_FLAG |
BAM_DESC_LOCK_FLAG);
cmd_list_ptr_start = cmd_list_ptr;
num_desc++;
qpic_nand_wait_for_cmd_exec(num_desc);
status = qpic_nand_read_reg(NAND_FLASH_STATUS, 0);
cmd_list_ptr_start = cmd_list_ptr;
cmd_list_read_ptr_start = cmd_list_read_ptr;
/* QPIC controller automatically sends
* GET_STATUS cmd to the nand card because
* of the configuration programmed.
* Read the result of GET_STATUS cmd.
*/
cmd_list_read_ptr = qpic_nand_add_read_ce(cmd_list_read_ptr, &status);
/* Enqueue the desc for the NAND_FLASH_STATUS read command */
bam_add_one_desc(&bam,
CMD_PIPE_INDEX,
(unsigned char*)cmd_list_read_ptr_start,
((uint32_t)cmd_list_read_ptr - (uint32_t)cmd_list_read_ptr_start),
BAM_DESC_CMD_FLAG);
cmd_list_ptr = qpic_nand_reset_status_ce(cmd_list_ptr, 1);
/* Enqueue the desc for NAND_FLASH_STATUS and NAND_READ_STATUS write commands */
bam_add_one_desc(&bam,
CMD_PIPE_INDEX,
(unsigned char*)cmd_list_ptr_start,
((uint32_t)cmd_list_ptr - (uint32_t)cmd_list_ptr_start),
BAM_DESC_INT_FLAG | BAM_DESC_CMD_FLAG);
num_desc = 2;
qpic_nand_wait_for_cmd_exec(num_desc);
#if !defined(CONFIG_SYS_DCACHE_OFF)
flush_dcache_range((unsigned long)&status,
(unsigned long)&status + sizeof(status));
#endif
status = qpic_nand_check_status(mtd, status);
/* Dummy read to unlock pipe. */
qpic_nand_read_reg(NAND_FLASH_STATUS, BAM_DESC_UNLOCK_FLAG);
/* Check for status errors*/
if (status) {
printf("NAND Erase error: Block address belongs to "
"bad block: %d\n", blk_addr);
qpic_nand_mark_badblock(mtd, (page << chip->page_shift));
return status;
}
/* Check for PROG_ERASE_OP_RESULT bit for the result of erase operation. */
if (!(status & PROG_ERASE_OP_RESULT))
return NANDC_RESULT_SUCCESS;
qpic_nand_mark_badblock(mtd, (page << chip->page_shift));
return status;
}
int
qpic_nand_erase(struct mtd_info *mtd, struct erase_info *instr)
{
int ret = 0, i;
loff_t offs;
u_long blocks;
u_long start;
u_long pageno;
struct nand_chip *chip = MTD_NAND_CHIP(mtd);
struct qpic_nand_dev *dev = MTD_QPIC_NAND_DEV(mtd);
/* Check for erase past end of device. */
if ((instr->addr + instr->len) > mtd->size)
return -EINVAL;
if (instr->addr & (mtd->erasesize - 1))
return -EINVAL;
if (instr->len & (mtd->erasesize - 1))
return -EINVAL;
start = instr->addr >> chip->phys_erase_shift;
blocks = instr->len >> chip->phys_erase_shift;
debug("number of blks to erase: %lu\n", blocks);
for (i = start; i < (start + blocks); i++) {
offs = i << chip->phys_erase_shift;
pageno = offs >> chip->page_shift;
/* Erase only if the block is not bad */
if (!instr->scrub && qpic_nand_block_isbad(mtd, offs)) {
printf("NAND Erase error: Block address belongs to "
"bad block: %ld\n", (pageno / (dev->num_pages_per_blk)));
return -EIO;
}
ret = qpic_nand_blk_erase(mtd, pageno);
if (ret) {
instr->fail_addr = offs;
printf("Erase operation failed \n");
}
}
return ret;
}
void
qpic_nand_mtd_params(struct mtd_info *mtd)
{
struct nand_chip *chip = MTD_NAND_CHIP(mtd);
mtd->type = MTD_NANDFLASH;
mtd->flags = MTD_CAP_NANDFLASH;
mtd->_erase = qpic_nand_erase;
#ifndef __UBOOT__
mtd->_point = NULL;
mtd->_unpoint = NULL;
#endif
mtd->_read = qpic_nand_read;
mtd->_write = qpic_nand_write;
mtd->_read_oob = qpic_nand_read_oob;
mtd->_write_oob = qpic_nand_write_oob;
mtd->_lock = NULL;
mtd->_unlock = NULL;
mtd->_block_isbad = qpic_nand_block_isbad;
mtd->_block_markbad = qpic_nand_mark_badblock;
mtd->_sync = qpic_nand_sync;
mtd->ecclayout = NULL;
mtd->bitflip_threshold = DIV_ROUND_UP(mtd->ecc_strength * 3, 4);
chip->page_shift = ffs(mtd->writesize) - 1;
chip->phys_erase_shift = ffs(mtd->erasesize) - 1;
/* One of the NAND layer functions that the command layer
* tries to access directly.
*/
chip->scan_bbt = qpic_nand_scan_bbt_nop;
}
#ifdef CONFIG_QSPI_SERIAL_TRAINING
static void qpic_reg_write_bam(unsigned int reg, unsigned int val)
{
int num_desc = 0;
struct cmd_element *cmd_list_ptr = ce_array;
struct cmd_element *cmd_list_ptr_start = ce_array;
bam_add_cmd_element(cmd_list_ptr, reg,
(uint32_t)val, CE_WRITE_TYPE);
cmd_list_ptr++;
bam_add_one_desc(&bam,
CMD_PIPE_INDEX,
(unsigned char*)cmd_list_ptr_start,
((uint32_t)cmd_list_ptr - (uint32_t)cmd_list_ptr_start),
BAM_DESC_CMD_FLAG);
num_desc++;
/* Notify BAM HW about the newly added descriptors */
bam_sys_gen_event(&bam, CMD_PIPE_INDEX, num_desc);
}
static void qpic_set_phase(int phase)
{
int spi_flash_cfg_val = 0x0;
int num_desc = 0;
struct cmd_element *cmd_list_ptr = ce_array;
struct cmd_element *cmd_list_ptr_start = ce_array;
if (phase < 1 || phase > 7) {
printf("%s : wrong phase value\n", __func__);
return;
}
/* get the current value of NAND_FLASH_SPI_CFG register */
spi_flash_cfg_val = readl(NAND_FLASH_SPI_CFG);
/* set SPI_LOAD_CLK_CNTR_INIT_EN bit */
spi_flash_cfg_val |= SPI_LOAD_CLK_CNTR_INIT_EN;
if ((readl(QPIC_NAND_CTRL) & BAM_MODE_EN)) {
bam_add_cmd_element(cmd_list_ptr, NAND_FLASH_SPI_CFG,
(uint32_t)spi_flash_cfg_val, CE_WRITE_TYPE);
cmd_list_ptr++;
spi_flash_cfg_val &= 0xf000ffff;
/* write the phase value for all the line */
spi_flash_cfg_val |= ((phase << 16) | (phase << 19) |
(phase << 22) | (phase << 25));
bam_add_cmd_element(cmd_list_ptr, NAND_FLASH_SPI_CFG,
(uint32_t)spi_flash_cfg_val, CE_WRITE_TYPE);
cmd_list_ptr++;
/* clear the SPI_LOAD_CLK_CNTR_INIT_EN bit to load the required
* phase value
*/
spi_flash_cfg_val &= ~SPI_LOAD_CLK_CNTR_INIT_EN;
bam_add_cmd_element(cmd_list_ptr, NAND_FLASH_SPI_CFG,
(uint32_t)spi_flash_cfg_val, CE_WRITE_TYPE);
cmd_list_ptr++;
bam_add_one_desc(&bam,
CMD_PIPE_INDEX,
(unsigned char*)cmd_list_ptr_start,
((uint32_t)cmd_list_ptr - (uint32_t)cmd_list_ptr_start),
BAM_DESC_CMD_FLAG);
num_desc++;
/* Notify BAM HW about the newly added descriptors */
bam_sys_gen_event(&bam, CMD_PIPE_INDEX, num_desc);
} else {
writel(spi_flash_cfg_val, NAND_FLASH_SPI_CFG);
spi_flash_cfg_val &= 0xf000ffff;
/* write the phase value for all the line */
spi_flash_cfg_val |= ((phase << 16) | (phase << 19) |
(phase << 22) | (phase << 25));
writel(spi_flash_cfg_val, NAND_FLASH_SPI_CFG);
/* clear the SPI_LOAD_CLK_CNTR_INIT_EN bit to load the required
* phase value
*/
spi_flash_cfg_val &= ~SPI_LOAD_CLK_CNTR_INIT_EN;
writel(spi_flash_cfg_val, NAND_FLASH_SPI_CFG);
}
}
static bool IsEven(int num)
{
return (!(num & 1));
}
static int qpic_find_most_appropriate_phase(u8 *phase_table, int phase_count)
{
int cnt = 0, i;
int phase = 0x0;
u8 phase_ranges[TOTAL_NUM_PHASE] = {'\0'};
/*currently we are considering continious 3 phase will
* pass and tke the middle one out of passed three phase.
* if all 7 phase passed so return middle phase i.e 4
*/
phase_count -= 2;
for (i = 0; i < phase_count; i++) {
if ((phase_table[i] + 1 == phase_table[i + 1]) &&
(phase_table[i + 1] + 1 == phase_table[i + 2])) {
phase_ranges[cnt++] = phase_table[i + 1];
}
}
/* filter out middle phase
* if cnt is odd then one middle phase
* if cnt is even then two middile phase
* so select lower one
*/
if (IsEven(cnt)) {
phase = phase_ranges[cnt/2 - 1];
} else {
phase = phase_ranges[cnt/2];
}
return phase;
}
static int qpic_execute_serial_training(struct mtd_info *mtd)
{
struct qpic_nand_dev *dev = MTD_QPIC_NAND_DEV(mtd);
struct nand_chip *chip = MTD_NAND_CHIP(mtd);
unsigned int start, blk_cnt = 0;
unsigned int offset, pageno, curr_freq;
int i;
unsigned int io_macro_freq_tbl[] = {24000000, 100000000, 200000000, 320000000};
unsigned char *data_buff, trained_phase[TOTAL_NUM_PHASE] = {'\0'};
int phase, phase_cnt, clk_src;
int training_seq_cnt = 4;
int index = 3, ret, phase_failed=0;
u32 start_blocks;
u32 size_blocks;
loff_t training_offset;
ret = smem_getpart("0:TRAINING", &start_blocks, &size_blocks);
if (ret < 0) {
printf("Serial Training part offset not found.\n");
return -EIO;
}
training_offset = ((loff_t) mtd->erasesize * start_blocks);
qpic_training_offset = training_offset;
start = (training_offset >> chip->phys_erase_shift);
offset = (start << chip->phys_erase_shift);
pageno = (offset >> chip->page_shift);
clk_src = GPLL0_CLK_SRC;
/* At 50Mhz frequency check the bad blocks, if training
* blocks is not bad then only start training else operate
* at 50Mhz with bypassing software serial traning.
*/
while (qpic_nand_block_isbad(mtd, offset)) {
/* block is bad skip this block and goto next
* block
*/
training_offset += mtd->erasesize;
start = (training_offset >> chip->phys_erase_shift);
offset = (start << chip->phys_erase_shift);
pageno = (offset >> chip->page_shift);
blk_cnt++;
if (blk_cnt == MAXIMUM_ALLOCATED_TRAINING_BLOCK)
break;
}
if (blk_cnt == MAXIMUM_ALLOCATED_TRAINING_BLOCK) {
printf("All training blocks are bad skipping serial training\n");
ret = -EIO;
goto err;
}
ret = qpic_nand_blk_erase(mtd, pageno);
if (ret) {
printf("error in erasing training block @%x\n",offset);
ret = -EIO;
goto err;
}
data_buff = (unsigned char *)malloc(mtd->writesize);
if (!data_buff) {
printf("Errorn in allocating memory.\n");
ret = -ENOMEM;
goto err;
}
/* prepare clean buffer */
memset(data_buff, 0xff, mtd->writesize);
for (i = 0; i < mtd->writesize; i += sizeof(training_block_64))
memcpy(data_buff + i, training_block_64, sizeof(training_block_64));
/*write training data to flash */
ret = NANDC_RESULT_SUCCESS;
struct mtd_oob_ops ops;
/* write this dumy byte in spare area to avoid bam
* transaction error while writing.
*/
memset(dev->pad_oob, 0xFF, dev->oob_per_page);
ops.mode = MTD_OPS_AUTO_OOB;
ops.len = mtd->writesize;
ops.retlen = 0;
ops.ooblen = dev->oob_per_page;
ops.oobretlen = 0;
ops.ooboffs = 0;
ops.datbuf = (uint8_t *)data_buff;
ops.oobbuf = (uint8_t *)dev->pad_oob;
/* write should be only once */
ret = qpic_nand_write_page(mtd, pageno, NAND_CFG, &ops);
if (ret) {
printf("Error in writing training data..\n");
goto free;
}
/* After write verify the the data with read @ lower frequency
* after that only start serial tarining @ higher frequency
*/
memset(data_buff, 0xff, mtd->writesize);
ops.datbuf = (uint8_t *)data_buff;
ret = qpic_nand_read_page(mtd, pageno, NAND_CFG, &ops);
if (ret) {
printf("%s : Read training data failed before training start\n",__func__);
goto free;
}
/* compare original data and read data */
for (i = 0; i < mtd->writesize; i += sizeof(training_block_64)) {
if (memcmp(data_buff + i, training_block_64, sizeof(training_block_64))) {
printf("Training data read failed @ lower frequency\n");
goto free;
}
}
/* disable feed back clock bit to start serial training */
qpic_reg_write_bam(NAND_QSPI_MSTR_CONFIG,
(~FB_CLK_BIT & readl(NAND_QSPI_MSTR_CONFIG)));
/* start serial training here */
curr_freq = io_macro_freq_tbl[index];
rettry:
phase = 1;
phase_cnt = 0;
/* set frequency, start from higer frequency */
if (curr_freq == IO_MACRO_CLK_24MHZ)
clk_src = XO_CLK_SRC;
qpic_set_clk_rate(curr_freq, QPIC_IO_MACRO_CLK, clk_src);
do {
/* set the phase */
qpic_set_phase(phase);
memset(data_buff, 0, mtd->writesize);
ops.datbuf = (uint8_t *)data_buff;
ret = qpic_nand_read_page(mtd, pageno, NAND_CFG, &ops);
if (ret) {
printf("%s : Read training data failed.\n",__func__);
goto free;
}
/* compare original data and read data */
for (i = 0; i < mtd->writesize; i += sizeof(training_block_64)) {
if (memcmp(data_buff + i, training_block_64, sizeof(training_block_64))) {
phase_failed++;
break;
}
}
if (i == mtd->writesize)
trained_phase[phase_cnt++] = phase;
/*printf("%s : Found good phase %d\n",__func__,phase);*/
} while (phase++ < TOTAL_NUM_PHASE);
if (phase_cnt) {
/* Get the appropriate phase */
phase = qpic_find_most_appropriate_phase(trained_phase, phase_cnt);
qpic_set_phase(phase);
/* update freq & phase to patch to the kernel */
qpic_frequency = curr_freq;
qpic_phase = phase;
} else {
/* lower the the clock frequency
* and try again
*/
curr_freq = io_macro_freq_tbl[--index];
printf("Retry with lower frequency @:%d\n",curr_freq);
if (--training_seq_cnt)
goto rettry;
/* Training failed */
printf("%s : Serial training failed\n",__func__);
ret = -EIO;
goto free;
}
/* if phase_failed == 7 it means serial traing failed
* on all the phase. so now we have to go via line by line
* i.e first check for MISO_0, with all the phase value i.e
* 1-7 and then MISO_1 and so on.
* NOTE: But this is the worse case , and it this type of senario
* will not come. if it will come then go with this design.
* ======To DO=====
*/
free:
free(data_buff);
err:
return ret;
}
#endif
static struct nand_chip nand_chip[CONFIG_SYS_MAX_NAND_DEVICE];
void qpic_nand_init(qpic_nand_cfg_t *qpic_nand_cfg)
{
struct mtd_info *mtd;
const struct udevice_id *of_match = qpic_ver_ids;
struct nand_chip *chip;
int ret = 0;
struct qpic_nand_dev *dev;
size_t alloc_size;
unsigned char *buf;
struct qpic_nand_init_config config;
fdt_addr_t nand_base;
int i;
while (of_match->compatible) {
ret = fdt_node_offset_by_compatible(gd->fdt_blob, 0,
of_match->compatible);
if (ret < 0) {
of_match++;
continue;
}
hw_ver = of_match->data;
break;
}
mtd = &nand_info[CONFIG_QPIC_NAND_NAND_INFO_IDX];
mtd->priv = &nand_chip[0];
chip = mtd->priv;
chip->priv = &qpic_nand_dev;
if (ret < 0) {
printf("Could not find nand-flash in device tree\n");
return;
}
nand_base = fdtdec_get_addr(gd->fdt_blob, ret, "reg");
if (nand_base == FDT_ADDR_T_NONE) {
printf("No valid NAND base address found in device tree\n");
return;
}
ret = fdt_subnode_offset(gd->fdt_blob, ret, "nand_gpio");
if (ret >= 0) {
qca_gpio_init(ret);
} else if (qpic_nand_cfg) {
printf("Could not find nand_gpio in dts, using defaults\n");
for (i = 0; i < qpic_nand_cfg->gpio_count; i++)
gpio_tlmm_config(&qpic_nand_cfg->gpio[i]);
} else {
printf("Could not find nand_gpio in dts, no defaults defined\n");
return;
}
#ifdef CONFIG_PAGE_SCOPE_MULTI_PAGE_READ
config.pipes.status_pipe = NAND_BAM_STATUS_PIPE;
config.pipes.status_pipe_grp = NAND_BAM_STATUS_PIPE_GRP;
#endif
config.pipes.read_pipe = DATA_PRODUCER_PIPE;
config.pipes.write_pipe = DATA_CONSUMER_PIPE;
config.pipes.cmd_pipe = CMD_PIPE;
config.pipes.read_pipe_grp = DATA_PRODUCER_PIPE_GRP;
config.pipes.write_pipe_grp = DATA_CONSUMER_PIPE_GRP;
config.pipes.cmd_pipe_grp = CMD_PIPE_GRP;
config.bam_base = QPIC_BAM_CTRL_BASE;
config.nand_base = nand_base;
config.ee = QPIC_NAND_EE;
config.max_desc_len = QPIC_NAND_MAX_DESC_LEN;
qpic_bam_init(&config);
#ifdef CONFIG_QPIC_SERIAL
qpic_spi_init(mtd);
/* Read the Hardware Version register */
hw_ver = readl(NAND_VERSION);
/* Only maintain major number */
hw_ver >>= 28;
if (hw_ver >= QCA_QPIC_V2_1_1) {
printf("QPIC controller support serial NAND\n");
} else {
printf("%s : Qpic controller not support serial NAND\n",
__func__);
return;
}
#endif
ret = qpic_nand_reset(mtd);
if (ret < 0)
return;
ret = qpic_nand_onfi_probe(mtd);
if (ret < 0)
return;
else if (ret > 0)
qpic_nand_non_onfi_probe(mtd);
#ifndef CONFIG_QPIC_SERIAL
qpic_config_timing_parameters(mtd);
#endif
/* Save the RAW and read/write configs */
ret = qpic_nand_save_config(mtd);
if (ret < 0)
return;
#ifdef CONFIG_QPIC_SERIAL
/* Check all blocks of serial NAND device is unlocked or
* not if not then unlock the all the blocks of serial NAND
* device also check the internal ecc is enabled or not if internal
* ecc is enabled then disable internal ecc using get/set feature
* command.
*/
ret = qpic_spi_nand_config(mtd);
if (ret < 0) {
printf("%s : Issue with Serial Nand configuration.\n",__func__);
return;
}
#endif
dev = MTD_QPIC_NAND_DEV(mtd);
qpic_nand_mtd_params(mtd);
#ifdef CONFIG_PAGE_SCOPE_MULTI_PAGE_READ
/* allocate memory for status buffer. we are doing
* this here because we do not know the device page
* siz ein advance if nand flash is parallel nand and ONFI
* complaint. so status buffer size will vary based on page size
* e.g if page size is 2KiB then status buffer size for one page
* will be 48-bytes similary for 4KiB page , status buffer size
* will be 96-bytes for one page and so on.
* QPIC controller support max page isze is 8 KiB now so maximum
* status buffer size for one page will be 192-bytes. for multi page
* read the status buffer size will be multiple of maximum pages supported
* in multipage.
*/
ret = qpic_alloc_status_buff(dev, mtd);
if (ret) {
printf("Error in allocating status buffer\n");
return;
}
#endif
/*
* allocate buffer for dev->pad_dat, dev->pad_oob, dev->zero_page,
* dev->zero_oob, dev->tmp_datbuf, dev->tmp_oobbuf
*
*/
#ifdef CONFIG_PAGE_SCOPE_MULTI_PAGE_READ
alloc_size = 3 * (mtd->writesize + (mtd->oobsize * MAX_MULTI_PAGE));
#else
alloc_size = 3 * (mtd->writesize + mtd->oobsize);
#endif
dev->buffers = malloc(alloc_size);
if (dev->buffers == NULL) {
printf("qpic_nand: failed to allocate memory\n");
ret = -ENOMEM;
goto err_buf;
}
buf = dev->buffers;
dev->pad_dat = buf;
buf += mtd->writesize;
dev->pad_oob = buf;
#ifdef CONFIG_PAGE_SCOPE_MULTI_PAGE_READ
buf += mtd->oobsize * MAX_MULTI_PAGE;
#else
buf += mtd->oobsize;
#endif
dev->zero_page = buf;
buf += mtd->writesize;
dev->zero_oob = buf;
buf += mtd->oobsize;
memset(dev->zero_page, 0x0, mtd->writesize);
memset(dev->zero_oob, 0x0, mtd->oobsize);
dev->tmp_datbuf = buf;
buf += mtd->writesize;
dev->tmp_oobbuf = buf;
buf += mtd->oobsize;
#ifdef CONFIG_QSPI_SERIAL_TRAINING
/* start serial training here */
#ifdef CONFIG_QSPI_LAYOUT_SWITCH
if (qpic_layout != QPIC_NAND_LAYOUT_SBL)
ret = qpic_execute_serial_training(mtd);
else {
ret = 0;
printf("!! Skip serial traning in SBL layout\n");
}
#else
ret = qpic_execute_serial_training(mtd);
#endif
if (ret) {
printf("Error in serial training.\n");
printf("switch back to 50MHz with feed back clock bit enabled\n");
if ((readl(QPIC_NAND_CTRL) & BAM_MODE_EN)) {
qpic_reg_write_bam(NAND_QSPI_MSTR_CONFIG,
(FB_CLK_BIT | readl(NAND_QSPI_MSTR_CONFIG)));
qpic_set_clk_rate(IO_MACRO_CLK_200_MHZ, QPIC_IO_MACRO_CLK,
GPLL0_CLK_SRC);
qpic_reg_write_bam(NAND_FLASH_SPI_CFG, 0x0);
qpic_reg_write_bam(NAND_FLASH_SPI_CFG, SPI_CFG_VAL);
qpic_reg_write_bam(NAND_FLASH_SPI_CFG,
(SPI_CFG_VAL & ~SPI_LOAD_CLK_CNTR_INIT_EN));
} else {
writel((FB_CLK_BIT | readl(NAND_QSPI_MSTR_CONFIG)),
NAND_QSPI_MSTR_CONFIG);
qpic_set_clk_rate(IO_MACRO_CLK_200_MHZ, QPIC_IO_MACRO_CLK,
GPLL0_CLK_SRC);
writel(0x0, NAND_FLASH_SPI_CFG);
writel(SPI_CFG_VAL, NAND_FLASH_SPI_CFG);
writel((SPI_CFG_VAL & ~SPI_LOAD_CLK_CNTR_INIT_EN),
NAND_FLASH_SPI_CFG);
}
}
#endif
/* Register with MTD subsystem. */
ret = nand_register(CONFIG_QPIC_NAND_NAND_INFO_IDX);
if (ret < 0) {
printf("qpic_nand: failed to register with MTD subsystem\n");
ret = NANDC_RESULT_FAILURE;
goto err_reg;
}
if (ret == 0)
return;
err_reg:
free(dev->buffers);
err_buf:
return;
}
#ifdef READ_ONFI_PAGE_PARA
void Read_onfi_ParameterPage_DataStructure(unsigned char *ParPage, int size)
{
unsigned int i, j;
unsigned int com_var = 0x00000000;
/* extract ONFI page signature */
com_var |= ParPage[i];
com_var <<= 8;
com_var |= ParPage[i+1];
com_var <<= 8;
com_var |= ParPage[i+2];
com_var <<= 8;
com_var |= ParPage[i+3];
printf("ONFI \'O'\, \'N'\, \'F'\, \'I'\ parameter page signature: 0x%08x\n",com_var);
/* Extract ONFI version number */
i += 4;
com_var = 0x0;
com_var |= ParPage[i++];
com_var <<= 8;
com_var |= ParPage[i++];
/* swap bytes*/
com_var = ((com_var << 8) & (0xff00)) | ((com_var >> 8) & (0x00ff));
if (com_var & (1 << 1))
printf("Revision number : 0x%04x and ONFI 1.0 complaint\n", com_var);
else if (com_var & (1 << 2))
printf("Revision number : 0x%04x and ONFI 2.0 complaint\n", com_var);
else if (com_var & (1 << 3))
printf("Revision number : 0x%04x and ONFI 2.1 complaint\n", com_var);
else if (com_var & (1 << 4))
printf("Revision number : 0x%04x and ONFI 2.2 complaint\n", com_var);
else if (com_var & (1 << 5))
printf("Revision number : 0x%04x and ONFI 2.3 complaint\n", com_var);
else
printf("Unsupported ONFI version:0x%04x\n",com_var);
/* extract Features supported by this card */
com_var = 0x0;
com_var |= ParPage[i++];
com_var <<= 8;
com_var |= ParPage[i++];
/*swap bytes */
com_var = ((com_var << 8) & (0xff00)) | ((com_var >> 8) & (0x00ff));
printf("Features supported : 0x%04x\n",com_var);
if (com_var & (1 << 0))
printf(" supports 16-bit data bus width.\n");
if (com_var & (1 << 1))
printf(" supports multiple LUN operations.\n");
if (com_var & (1 << 2))
printf(" supports non-sequential page programming.\n");
if (com_var & (1 << 3))
printf(" supports interleaved operations.\n");
if (com_var & (1 << 4))
printf(" supports odd to even page Copyback.\n");
/* Extarct Optional command supported */
com_var = 0x0;
com_var |= ParPage[i++];
com_var <<= 8;
com_var |= ParPage[i++];
/*swap bytes */
com_var = ((com_var << 8) & (0xff00)) | ((com_var >> 8) & (0x00ff));
printf("Optional command supported:0x%04x\n",com_var);
if (com_var & (1 << 0))
printf(" supports Page Cache Program command.\n");
if (com_var & (1 << 1))
printf(" supports Read Cache commands.\n");
if (com_var & (1 << 2))
printf(" supports Get Features and Set Features.\n");
if (com_var & (1 << 3))
printf(" supports Read Status Enhanced.\n");
if (com_var & (1 << 4))
printf(" supports Copyback.\n");
if (com_var & (1 << 5))
printf(" supports Read Unique ID.\n");
/* Bytes 10-31 reserved */
i += 22;
/* extract Manufacturer information block */
/* Extact Device manufacturer
* 6 space character 0x20 */
unsigned char dev_manf[22] = {'\0'};
memcpy(dev_manf, ParPage + i, 12);
printf("Device manufacturer:");
for(j = 0; j < 12; j++)
printf("%c",dev_manf[j]);
printf("\n");
i += 12;
/* extract device model */
memset(dev_manf, '\0', 22);
memcpy(dev_manf, ParPage + i, 20);
printf("Device model:");
for (j = 0; j < 20; j++)
printf("%c",dev_manf[j]);
printf("\n");
i += 20;
/* Extract JEDEC manufacturer ID */
com_var = 0x0;
com_var = ParPage[i++];
printf("JEDEC manufacturer ID:0x%02x\n",com_var);
/* Extract Date code */
com_var = 0x0;
com_var |= ParPage[i++];
com_var <<= 8;
com_var |= ParPage[i++];
printf("Date code:0x%04x\n",com_var);
/*67-79 bytes are reserved */
i += 13;
/* Extract memory organization block */
/* Extract number of data bytes per page */
com_var = 0x0;
com_var |= ParPage[i++];
com_var <<= 8;
com_var |= ParPage[i++];
com_var <<= 8;
com_var |= ParPage[i++];
com_var <<= 8;
com_var |= ParPage[i++];
/* reverse byte on int
* 0x00 08 00 00
* 0x00 00 08 00*/
com_var = ((com_var >> 24) & 0xff) | ((com_var << 8) & 0xff0000) |
((com_var >> 8) & 0xff00) | ((com_var << 24) & 0xff000000);
printf("Number of data bytes per page:0x%08x, %d bytes, %dKiB\n",com_var,com_var,com_var/1024);
/* Extract Number of spare bytes per page */
com_var = 0x0;
com_var |= ParPage[i++];
com_var <<= 8;
com_var |= ParPage[i++];
/* swap bytes */
com_var = ((com_var << 8) & (0xff00)) | ((com_var >> 8) & (0x00ff));
printf("Number of spare bytes per page:0x%04x, %d bytes\n", com_var,com_var);
/* extract Number of data bytes per partial page */
com_var = 0x0;
com_var |= ParPage[i++];
com_var <<= 8;
com_var |= ParPage[i++];
com_var <<= 8;
com_var |= ParPage[i++];
com_var <<= 8;
com_var |= ParPage[i++];
/*reverse bytes */
com_var = ((com_var >> 24) & 0xff) | ((com_var << 8) & 0xff0000) |
((com_var >> 8) & 0xff00) | ((com_var << 24) & 0xff000000);
printf("Number of data bytes per partial page:0x%08x, %d bytes\n",com_var,com_var);
/* extarct Number of spare bytes per partial page*/
com_var = 0x0;
com_var |= ParPage[i++];
com_var <<= 8;
com_var |= ParPage[i++];
/* swap bytes */
com_var = ((com_var << 8) & (0xff00)) | ((com_var >> 8) & (0x00ff));
printf("Number of spare bytes per partial page:0x%02x, %d bytes\n",com_var,com_var);
/* Extract Number of pages per block */
com_var = 0x0;
com_var |= ParPage[i++];
com_var <<= 8;
com_var |= ParPage[i++];
com_var <<= 8;
com_var |= ParPage[i++];
com_var <<= 8;
com_var |= ParPage[i++];
/*reverse bytes */
com_var = ((com_var >> 24) & 0xff) | ((com_var << 8) & 0xff0000) |
((com_var >> 8) & 0xff00) | ((com_var << 24) & 0xff000000);
printf("Number of pages per block:0x%08x, %d bytes\n",com_var,com_var);
/* Extract Number of blocks per unit */
com_var = 0x0;
com_var |= ParPage[i++];
com_var <<= 8;
com_var |= ParPage[i++];
com_var <<= 8;
com_var |= ParPage[i++];
com_var <<= 8;
com_var |= ParPage[i++];
/*reverse bytes */
com_var = ((com_var >> 24) & 0xff) | ((com_var << 8) & 0xff0000) |
((com_var >> 8) & 0xff00) | ((com_var << 24) & 0xff000000);
printf("Number of blocks per unit:0x%08x, %d bytes\n",com_var,com_var);
/* Extarct Number of logical units*/
com_var = 0x0;
com_var |= ParPage[i++];
printf("Number of logical units:0x%02x\n",com_var);
/* Extarct Number of address cycles */
com_var = 0x0;
com_var |= ParPage[i++];
printf("Number of address cycles:0x%02x\n",com_var);
printf(" Row address cycles:%d\n",(com_var & 0x0000000f));
printf(" Column address cycles:%d\n",(com_var >> 4) & 0x0000000f);
/* Extarct Number of bits per cell*/
com_var = 0x0;
com_var |= ParPage[i++];
printf("Number of bits per cell:0x%02x\n",com_var);
/* Extract Bad blocks maximum per unit*/
com_var = 0x0;
com_var |= ParPage[i++];
com_var <<= 8;
com_var |= ParPage[i++];
com_var = ((com_var << 8) & (0xff00)) | ((com_var >> 8) & (0x00ff));
printf("Bad blocks maximum per unit:0x%04x, %d\n",com_var,com_var);
/* Extract Block endurance */
com_var = 0x0;
com_var |= ParPage[i++];
com_var <<= 8;
com_var |= ParPage[i++];
com_var = ((com_var << 8) & (0xff00)) | ((com_var >> 8) & (0x00ff));
printf("Block endurance:0x%04x\n",com_var);
/* Extract Guaranteed valid blocks at beginning of target*/
com_var = 0x0;
com_var |= ParPage[i++];
printf("Guaranteed valid blocks at beginning of target:0x%02x\n",com_var);
/* Extract Block endurance for guaranteed valid blocks*/
com_var = 0x0;
com_var |= ParPage[i++];
com_var <<= 8;
com_var |= ParPage[i++];
com_var = ((com_var << 8) & (0xff00)) | ((com_var >> 8) & (0x00ff));
printf("Block endurance for guaranteed valid blocks:0x%04x\n",com_var);
/*Extract Number of programs per page */
com_var = 0x0;
com_var |= ParPage[i++];
printf("Number of programs per page:0x%02x\n",com_var);
/*Extract Partial programming attributes*/
com_var = 0x0;
com_var |= ParPage[i++];
printf("Partial programming attributes:0x%02x\n",com_var);
if (com_var & (1 << 0))
printf(" partial page programming has constraints.\n");
if (com_var & (1 << 4))
printf(" partial page layout is partial page data followed by partial page spare.\n");
/* Extract Number of bits ECC correctability*/
com_var = 0x0;
com_var |= ParPage[i++];
printf("Number of bits ECC correctability:0x%02x\n",com_var);
/* Extract Number of interleaved address bits*/
com_var = 0x0;
com_var |= ParPage[i++];
printf("Number of interleaved address bits:0x%02x\n",com_var);
/* Extract Interleaved operation attributes*/
com_var = 0x0;
com_var |= ParPage[i++];
printf("Interleaved operation attributes:0x%02x\n",com_var);
if (com_var & (1 << 1))
printf(" no block address restrictions.\n");
if (com_var & (1 << 2))
printf(" program cache supported.\n");
/* 115-127 reserved */
i += 13;
/* Extract Electrical parameter block*/
/*Extract I/O pin capacitance*/
com_var = 0x0;
com_var |= ParPage[i++];
printf("I/O pin capacitance:0x%02x\n",com_var);
/*Extract Timing mode support*/
com_var = 0x0;
com_var |= ParPage[i++];
com_var <<= 8;
com_var |= ParPage[i++];
com_var = ((com_var << 8) & (0xff00)) | ((com_var >> 8) & (0x00ff));
printf("Timing mode support:0x%04x\n",com_var);
if (com_var & (1 << 0))
printf(" supports timing mode 0, shall be 1\n");
if (com_var & (1 << 1))
printf(" supports timing mode 1\n");
if (com_var & (1 << 2))
printf(" supports timing mode 2\n");
if (com_var & (1 << 3))
printf(" supports timing mode 3\n");
if (com_var & (1 << 4))
printf(" supports timing mode 4\n");
if (com_var & (1 << 5))
printf(" supports timing mode 5\n");
/*Extarct Program cache timing mode support*/
com_var = 0x0;
com_var |= ParPage[i++];
com_var <<= 8;
com_var |= ParPage[i++];
com_var = ((com_var << 8) & (0xff00)) | ((com_var >> 8) & (0x00ff));
printf("Program cache timing mode support:0x%04x\n",com_var);
if (com_var & (1 << 0))
printf(" supports timing mode 0\n");
if (com_var & (1 << 1))
printf(" supports timing mode 1\n");
if (com_var & (1 << 2))
printf(" supports timing mode 2\n");
if (com_var & (1 << 3))
printf(" supports timing mode 3\n");
if (com_var & (1 << 4))
printf(" supports timing mode 4\n");
if (com_var & (1 << 5))
printf(" supports timing mode 5\n");
/*Extract tPROG (MAX) page program time*/
com_var = 0x0;
com_var |= ParPage[i++];
com_var <<= 8;
com_var |= ParPage[i++];
com_var = ((com_var << 8) & (0xff00)) | ((com_var >> 8) & (0x00ff));
printf("tPROG Maximum page program time:0x%04x, %d us\n",com_var,com_var);
/*Extract tBERS Maximum block erase time*/
com_var = 0x0;
com_var |= ParPage[i++];
com_var <<= 8;
com_var |= ParPage[i++];
com_var = ((com_var << 8) & (0xff00)) | ((com_var >> 8) & (0x00ff));
printf("tBERS Maximum block erase time:0x%04x, %d us\n",com_var,com_var);
/* Extract tR Maximum page read time*/
com_var = 0x0;
com_var |= ParPage[i++];
com_var <<= 8;
com_var |= ParPage[i++];
com_var = ((com_var << 8) & (0xff00)) | ((com_var >> 8) & (0x00ff));
printf("tR Maximum page read time:0x%04x, %d us\n",com_var,com_var);
/* Extract tCCS Minimum change column setup time*/
com_var = 0x0;
com_var |= ParPage[i++];
com_var <<= 8;
com_var |= ParPage[i++];
com_var = ((com_var << 8) & (0xff00)) | ((com_var >> 8) & (0x00ff));
printf("tCCS Minimum change column setup time:0x%04x, %d ns\n",com_var,com_var);
/* 141-163 reserved */
i += 23;
/* Extract Vendor block */
/* Extract Vendor specific Revision number*/
com_var = 0x0;
com_var |= ParPage[i++];
com_var <<= 8;
com_var |= ParPage[i++];
com_var = ((com_var << 8) & (0xff00)) | ((com_var >> 8) & (0x00ff));
printf("Vendor specific Revision number:0x%04x\n",com_var);
/* Extract Vendor specific
* 166 - 253 bytes
*/
printf("Bytes 166-253 are Vendor specific.\n");
i += 88;
/* Extract Integrity CRC */
com_var = 0x0;
com_var |= ParPage[i++];
com_var <<= 8;
com_var |= ParPage[i++];
com_var = ((com_var << 8) & (0xff00)) | ((com_var >> 8) & (0x00ff));
printf("Integrity CRC:0x%04x\n",com_var);
/*256-511 bytes are vale of bytes 0-255
*512-767 bytes are value of bytes 0-255*/
printf("256-511 bytes are value of bytes 0-255\n");
printf("512-767 bytes are value of bytes 0-255\n");
}
#endif
#ifdef CONFIG_QSPI_LAYOUT_SWITCH
static int qpic_nand_deinit(void)
{
int ret = 0;
struct mtd_info *mtd = &nand_info[CONFIG_QPIC_NAND_NAND_INFO_IDX];
struct qpic_nand_dev *dev = MTD_QPIC_NAND_DEV(mtd);
if (run_command("ubi exit", 0) != CMD_RET_SUCCESS)
return CMD_RET_FAILURE;
#ifdef CONFIG_MTD_DEVICE
ret = del_mtd_device(mtd);
if (ret < 0)
return ret;
#endif
dev->cfg0 = 0;
dev->cfg1 = 0;
dev->ecc_bch_cfg = 0;
free(dev->buffers);
return ret;
}
static int do_qpic_nand_cmd(cmd_tbl_t *cmdtp, int flag,
int argc, char * const argv[])
{
int ret;
if (argc != 2 || serial_params->page_size == 2048)
return CMD_RET_USAGE;
if (strcmp(argv[1], "sbl") == 0) {
if (qpic_layout == QPIC_NAND_LAYOUT_SBL) {
printf("Already in sbl layout\n");
return CMD_RET_SUCCESS;
}
qpic_layout = QPIC_NAND_LAYOUT_SBL;
} else if (strcmp(argv[1], "linux") == 0) {
if (qpic_layout == QPIC_NAND_LAYOUT_LINUX) {
printf("Already in linux layout\n");
return CMD_RET_SUCCESS;
}
qpic_layout = QPIC_NAND_LAYOUT_LINUX;
} else
return CMD_RET_USAGE;
ret = qpic_nand_deinit();
if (ret < 0)
return CMD_RET_FAILURE;
nand_curr_device = -1;
qpic_nand_init(NULL);
return CMD_RET_SUCCESS;
}
U_BOOT_CMD(qpic_nand, 2, 1, do_qpic_nand_cmd,
"Switch between SBL and Linux kernel page on 4K NAND Flash.",
"qpic_nand (sbl | linux)");
#endif
Reference in a new issue View git blame Copy permalink