Matt Porter a3c3fabb0f arm, omap3: fix warm reset serial output on OMAP36xx/AM/DM37xx ... In warm reset conditions on OMAP36xx/AM/DM37xx the rom code incorrectly sets the DPLL4 clock input divider to /6.5 which is an invalid value unless the input clock is 13MHz. When a JTAG emulator is attached, a warm reset is necessary after the emulator gains control of the process. This results in a loss of serial output due to the invalid DPLL4 settings. This patch fixes the issue by resetting the DPLL4 clock input divider to /1 when the input clock is not 13MHz. AM/DM37x TRM section 3.5.3.3.3.2.1 specifies that the /6.5 setting is only used when the input clock is 13MHz. Signed-off-by: Matt Porter <mporter@ti.com>		2012-05-15 08:31:41 +02:00
..
arm720t	arm: Use common .lds file where possible	2012-03-30 07:43:47 +02:00
arm920t	arm: Use common .lds file where possible	2012-03-30 07:43:47 +02:00
arm925t	arm: Use common .lds file where possible	2012-03-30 07:43:47 +02:00
arm926ejs	i.MX28: Avoid redefining serial_put[cs]()	2012-05-15 08:31:36 +02:00
arm946es	arm: Use common .lds file where possible	2012-03-30 07:43:47 +02:00
arm1136	ARM1136: MX35: Make asm routines volatile in cache ops	2012-04-16 14:53:59 +02:00
arm1176	arm: Use common .lds file where possible	2012-03-30 07:43:47 +02:00
arm_intcm	arm: Use common .lds file where possible	2012-03-30 07:43:47 +02:00
armv7	arm, omap3: fix warm reset serial output on OMAP36xx/AM/DM37xx	2012-05-15 08:31:41 +02:00
ixp	IXP: Squash warnings in IXP NPE	2012-03-26 23:09:26 +02:00
lh7a40x	arm: Use common .lds file where possible	2012-03-30 07:43:47 +02:00
pxa	arm: Use common .lds file where possible	2012-03-30 07:43:47 +02:00
s3c44b0	arm: Use common .lds file where possible	2012-03-30 07:43:47 +02:00
sa1100	arm: Use common .lds file where possible	2012-03-30 07:43:47 +02:00
u-boot.lds	arm: add a common .lds link script	2012-03-30 07:43:44 +02:00