Abhishek Sahu 4d61ddbda3 qcom: nand: configure QPIC XFER STEPS registers ... The QPIC XFER STEPS will not be configured in non NAND boot mode and the data transfer speed will be very slow. Now this patch reads the timing parameter from ONFI page and configures the NAND XFER STEPS registers for highest supported ONFI mode. For NON ONFI device, it will configure to default mode. Change-Id: I2daf4a92255307efc53db9bb7fe2f02e8c00c3fa Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>		2017-06-22 23:48:48 -07:00
..
adc	sandbox: add ADC driver	2015-11-02 10:38:00 +09:00
bios_emulator	Various Makefiles: Add SPDX-License-Identifier tags	2015-11-10 09:19:52 -05:00
block	Fix typo: firstly -> first.	2015-12-05 18:22:23 -05:00
bootcount	bootcount: Correct #endif comment to match, other aesthetics	2016-01-08 10:15:43 -05:00
clk	qca: move ARM specific files to another sublevel	2017-01-06 12:33:30 +05:30
core	dm: core: Fix Kconfig text to mention SPL in SPL_OF_TRANSLATE	2015-12-10 20:41:56 -07:00
cpu
crypto	drivers/crypto/fsl: fix endianness issue in RNG	2015-12-15 08:57:35 +08:00
ddr	move erratum a008336 and a008514 to soc specific file	2015-12-15 08:57:32 +08:00
demo	drivers: hierarchize drivers Kconfig menu	2015-08-12 20:47:44 -04:00
dfu	dfu: dfu_sf: Pass duplicate devstr to parse_dev	2015-11-03 17:29:33 +01:00
dma	qca: move ARM specific files to another sublevel	2017-01-06 12:33:30 +05:30
fpga	Move console definitions into a new console.h file	2015-11-19 20:27:50 -07:00
gpio	qca: move ARM specific files to another sublevel	2017-01-06 12:33:30 +05:30
hwmon	Fix bad return value checks (detected with Coccinelle)	2015-10-24 13:50:30 -04:00
i2c	qca: move ARM specific files to another sublevel	2017-01-06 12:33:30 +05:30
input	Move console definitions into a new console.h file	2015-11-19 20:27:50 -07:00
led	dm: led: Tidy up SPL options for the led and led-gpio	2015-09-02 21:28:22 -06:00
memory	Various Makefiles: Add SPDX-License-Identifier tags	2015-11-10 09:19:52 -05:00
misc	Move console definitions into a new console.h file	2015-11-19 20:27:50 -07:00
mmc	mmc: eMMC add Secured Trim command support	2017-04-11 23:55:40 -07:00
mtd	qcom: nand: configure QPIC XFER STEPS registers	2017-06-22 23:48:48 -07:00
net	ipq807x: enable ethernet address assignment from ART partition	2017-06-01 06:16:04 -07:00
pci	ipq807x: Fixed the PCIE linkup failure leads to crash	2017-06-02 14:47:25 -07:00
pcmcia
pinctrl	rockchip: rk3036: Add pinctrl driver	2015-12-01 08:07:22 -07:00
power	sunxi: power: axp818: add support for axp818 driver	2015-12-10 11:14:22 +01:00
pwm
qe
ram	ram: rename CONFIG_SPL_RAM_SUPPORT to CONFIG_SPL_RAM	2015-08-18 13:46:02 -04:00
remoteproc	drivers: remoteproc: rproc-uclass: Fix check for NULL pointers	2015-12-05 18:22:32 -05:00
rtc	rtc: Add MCP79411 support to DS1307 rtc driver	2015-11-04 15:19:12 -08:00
serial	qca: move ARM specific files to another sublevel	2017-01-06 12:33:30 +05:30
soc	Various Makefiles: Add SPDX-License-Identifier tags	2015-11-10 09:19:52 -05:00
sound	of: clean up OF_CONTROL ifdef conditionals	2015-08-18 13:46:05 -04:00
spi	spi: qcom: Fix spi probe issue	2017-06-15 15:34:37 +05:30
thermal	imx: mx7: fix the temperature checking for Rev1.1	2016-01-07 17:53:11 +01:00
timer	x86: Move i8254_init() to x86_cpu_init_f()	2015-12-09 17:44:44 +08:00
tpm	dm: tpm: Drop CONFIG_DM_TPM	2015-10-23 09:42:28 -06:00
twserial
usb	qca: ipq: USB support is now DM model	2016-07-24 17:03:05 +05:30
video	Merge branch 'master' of git://www.denx.de/git/u-boot-imx	2015-12-04 08:21:28 -05:00
watchdog	imx_watchdog: always set minimal timeout in reset_cpu	2016-01-07 17:54:53 +01:00
Kconfig	dm: adc: add simple ADC uclass implementation	2015-11-02 10:38:00 +09:00
Makefile	Fix compilation errors in clk driver	2016-09-29 21:03:49 +05:30