Selvam Sathappan Periakaruppan 929b70f32f arm: dts: ipq95xx: Add Ethernet Support ... In EMU Platform, there is no PHY/Uniphy, clocks/resets and by default all MACs will be configured as SGMII mode. The first 4 ports will have GMAC and PC side link speed should be set as 10M, RUMI side link speed should be configured as 1000M and then last 2 ports will have XGMAC and PC side link speed should be set as 100M and the RUMI side link speed should be configured as 10G. Change-Id: I2ffe2bdb9c58eeacb3f765094c2bfb89e81a5c7d Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>		2021-05-13 05:36:23 -07:00
..
eth-ipq6018.h	drivers: net: ipq6018: Support QSGMII,SGMII,SGMII_FIBER modes	2019-08-04 21:39:58 -07:00
eth-ipq9574.h	arm: dts: ipq95xx: Add Ethernet Support	2021-05-13 05:36:23 -07:00
gpio-ipq40xx.h	ipq40xx: Update emmc pin configs	2018-02-02 12:19:16 +05:30
gpio-ipq806x.h	qca: GPIO: Moved GPIO bit value macros to dt-bindings	2016-08-12 15:15:01 +05:30
gpio-ipq807x.h	ipq807x: Add PCIE support for IPQ807x	2016-09-29 02:00:01 -07:00
gpio-ipq5018.h	ipq5018: Update TLMM gpio configuration	2019-11-27 12:29:14 +05:30
gpio-ipq6018.h	qca: ipq6018: Adding support for IPQ6018	2018-09-20 18:49:55 +05:30
gpio-ipq9574.h	ipq9574: Change references of ipq9048 to ipq9574	2021-03-30 19:54:12 -07:00