u-boot-2016/arch/arm/dts/ipq9574-db-al02-c1.dts

/*
 * Copyright (c) 2016-2019, 2021, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

/dts-v1/;
#include "ipq9574-soc.dtsi"
/ {
	machid = <0x1050001>;
	config_name = "config@db-al02-c1", "config-db-al02-c1";

	aliases {
		console = "/serial@78B1000";
		uart2 = "/serial@78B2000";
		pci0 = "/pci@28000000";
		pci1 = "/pci@10000000";
		pci2 = "/pci@20000000";
		pci3 = "/pci@18000000";
		usb0 = "/xhci@8a00000";
		nand = "/nand-controller@79B0000";
		i2c0 = "/i2c@78B8000";
	};

	console: serial@78B1000 {
		status = "ok";
		serial_gpio {
			blsp1_uart2_rx {
				gpio = <34>;
				func = <1>;
				pull = <GPIO_NO_PULL>;
				drvstr = <GPIO_8MA>;
				od_en = <GPIO_OD_DISABLE>;
			};
			blsp1_uart2_tx {
				gpio = <35>;
				func = <1>;
				pull = <GPIO_NO_PULL>;
				drvstr = <GPIO_8MA>;
				od_en = <GPIO_OD_DISABLE>;
			};
		};
	};

	spi {
		spi_gpio {
			blsp0_spi_clk {
				gpio = <11>;
				func = <1>;
				pull = <GPIO_NO_PULL>;
				oe = <GPIO_OE_ENABLE>;
				drvstr = <GPIO_8MA>;
			};
			blsp0_spi_mosi {
				gpio = <14>;
				func = <1>;
				pull = <GPIO_NO_PULL>;
				oe = <GPIO_OE_ENABLE>;
				drvstr = <GPIO_8MA>;
			};
			blsp0_spi_miso {
				gpio = <13>;
				func = <1>;
				pull = <GPIO_NO_PULL>;
				drvstr = <GPIO_8MA>;
			};
			blsp0_spi_cs {
				gpio = <12>;
				func = <1>;
				oe = <GPIO_OE_ENABLE>;
				drvstr = <GPIO_8MA>;
			};
		};
	};

	nand: nand-controller@79B0000 {
		status = "okay";
		nand_gpio {
			qspi_dat3 {
				gpio = <0>;
				func = <2>;
				pull = <GPIO_NO_PULL>;
				od_en = <GPIO_OD_DISABLE>;
				drvstr = <GPIO_8MA>;
			};
			qspi_dat2 {
				gpio = <1>;
				func = <2>;
				pull = <GPIO_NO_PULL>;
				od_en = <GPIO_OD_DISABLE>;
				drvstr = <GPIO_8MA>;
			};
			qspi_dat1 {
				gpio = <2>;
				func = <2>;
				pull = <GPIO_NO_PULL>;
				od_en = <GPIO_OD_DISABLE>;
				drvstr = <GPIO_8MA>;
			};
			qspi_dat0 {
				gpio = <3>;
				func = <2>;
				pull = <GPIO_NO_PULL>;
				od_en = <GPIO_OD_DISABLE>;
				drvstr = <GPIO_8MA>;
			};
			qspi_cs_n {
				gpio = <4>;
				func = <2>;
				pull = <GPIO_NO_PULL>;
				od_en = <GPIO_OD_DISABLE>;
				drvstr = <GPIO_8MA>;
			};
			qspi_clk {
				gpio = <5>;
				func = <2>;
				pull = <GPIO_NO_PULL>;
				od_en = <GPIO_OD_DISABLE>;
				drvstr = <GPIO_8MA>;
			};
		};
	};

	pci0: pci@28000000 {
		status = "ok";
		perst_gpio = <23>;
		pci_gpio {
			pci_rst {
				gpio = <23>;
				func = <0>;
				pull = <GPIO_PULL_UP>;
				oe = <GPIO_OD_ENABLE>;
				od_en = <GPIO_OD_DISABLE>;
				drvstr = <GPIO_8MA>;
			};
		};
	};

	pci1: pci@10000000 {
		status = "ok";
		perst_gpio = <26>;
		pci_gpio {
			pci_rst {
				gpio = <26>;
				func = <0>;
				pull = <GPIO_PULL_DOWN>;
				oe = <GPIO_OD_ENABLE>;
				od_en = <GPIO_OD_DISABLE>;
				drvstr = <GPIO_8MA>;
			};
		};
	};

	pci2: pci@20000000 {
		status = "ok";
		perst_gpio = <29>;
		pci_gpio {
			pci_rst {
				gpio = <29>;
				func = <0>;
				pull = <GPIO_PULL_DOWN>;
				oe = <GPIO_OD_ENABLE>;
				od_en = <GPIO_OD_DISABLE>;
				drvstr = <GPIO_8MA>;
			};
		};
	};

	pci3: pci@18000000 {
		status = "ok";
		perst_gpio = <32>;
		pci_gpio {
			pci_rst {
				gpio = <32>;
				func = <0>;
				pull = <GPIO_PULL_UP>;
				oe = <GPIO_OD_ENABLE>;
				od_en = <GPIO_OD_DISABLE>;
				drvstr = <GPIO_8MA>;
			};
		};
	};

	ess-switch {
		switch_mac_mode0 = <PORT_WRAPPER_PSGMII>;
		switch_mac_mode1 = <PORT_WRAPPER_SGMII0_RGMII4>;
		switch_mac_mode2 = <PORT_WRAPPER_USXGMII>;
		qca807x_gpio = <60>;
		qca807x_gpio_cnt = <1>;
		qca808x_gpio = <57>;
		qca808x_gpio_cnt = <1>;
		aquantia_gpio = <36>;
		aquantia_gpio_cnt = <1>;
		aquantia_port = <5>;
		aquantia_port_cnt = <1>;
		mdc_mdio_gpio = <38 39>;
		port_phyinfo {
			port@0 {
				phy_address = <16>;
				phy_type = <QCA807x_PHY_TYPE>;
			};
			port@1 {
				phy_address = <17>;
				phy_type = <QCA807x_PHY_TYPE>;
			};
			port@2 {
				phy_address = <18>;
				phy_type = <QCA807x_PHY_TYPE>;
			};
			port@3 {
				phy_address = <19>;
				phy_type = <QCA807x_PHY_TYPE>;
			};
			port@4 {
				phy_address = <28>;
				phy_type = <QCA808x_PHY_TYPE>;
			};
			port@5 {
				phy_address = <0>;
				phy_type = <AQ_PHY_TYPE>;
			};
		};
	};
};