u-boot-2016/arch/arm/dts/ipq5332-db-mi03.1.dts

/*
 * Copyright (c) 2016-2021, The Linux Foundation. All rights reserved.
 *
 * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

/dts-v1/;
#include "ipq5332-soc.dtsi"
/ {
	machid = <0x1060002>;
	config_name = "config@db-mi03.1", "config-db-mi03.1";

	aliases {
		console = "/serial@78AF000";
		nand = "/nand-controller@79B0000";
		mmc = "/sdhci@7804000";
		usb0 = "/xhci@8a00000";
		pci0 = "/pci@20000000";
		pci1 = "/pci@18000000";
	};

	serial@78AF000 {
		status = "ok";
		serial_gpio {
			blsp0_uart_rx {
				gpio = <18>;
				func = <1>;
				pull = <GPIO_PULL_UP>;
				drvstr = <GPIO_8MA>;
			};
			blsp0_uart_tx {
				gpio = <19>;
				func = <1>;
				drvstr = <GPIO_8MA>;
				pull = <GPIO_PULL_UP>;
			};
		};
	};

	spi {
		spi_gpio {
			blsp0_spi_clk {
				gpio = <14>;
				func = <1>;
				pull = <GPIO_PULL_UP>;
				oe = <GPIO_OE_ENABLE>;
				drvstr = <GPIO_8MA>;
			};
			blsp0_spi_mosi {
				gpio = <15>;
				func = <1>;
				pull = <GPIO_PULL_UP>;
				oe = <GPIO_OE_ENABLE>;
				drvstr = <GPIO_8MA>;
			};
			blsp0_spi_miso {
				gpio = <16>;
				func = <1>;
				pull = <GPIO_PULL_UP>;
				drvstr = <GPIO_8MA>;
			};
			blsp0_spi_cs {
				gpio = <17>;
				func = <1>;
				pull = <GPIO_PULL_UP>;
				oe = <GPIO_OE_ENABLE>;
				drvstr = <GPIO_8MA>;
			};
		};
	};

	nand: nand-controller@79B0000 {
		nand_gpio {
			qspi_dat3 {
				gpio = <8>;
				func = <2>;
				pull = <GPIO_PULL_DOWN>;
				drvstr = <GPIO_8MA>;
			};
			qspi_dat2 {
				gpio = <9>;
				func = <2>;
				pull = <GPIO_PULL_DOWN>;
				drvstr = <GPIO_8MA>;
			};
			qspi_dat1 {
				gpio = <10>;
				func = <2>;
				pull = <GPIO_PULL_DOWN>;
				drvstr = <GPIO_8MA>;
			};
			qspi_dat0 {
				gpio = <11>;
				func = <2>;
				pull = <GPIO_PULL_DOWN>;
				drvstr = <GPIO_8MA>;
			};
			qspi_cs_n {
				gpio = <12>;
				func = <2>;
				pull = <GPIO_PULL_UP>;
				drvstr = <GPIO_8MA>;
			};
			qspi_clk {
				gpio = <13>;
				func = <2>;
				pull = <GPIO_PULL_DOWN>;
				drvstr = <GPIO_8MA>;
			};
		};
	};

	mmc: sdhci@7804000 {
		mmc_gpio {
			emmc_dat3 {
				gpio = <8>;
				func = <1>;
				pull = <GPIO_PULL_UP>;
				drvstr = <GPIO_8MA>;
			};
			emmc_dat2 {
				gpio = <9>;
				func = <1>;
				pull = <GPIO_PULL_UP>;
				drvstr = <GPIO_8MA>;
			};
			emmc_dat1 {
				gpio = <10>;
				func = <1>;
				pull = <GPIO_PULL_UP>;
				drvstr = <GPIO_8MA>;
			};
			emmc_dat0 {
				gpio = <11>;
				func = <1>;
				pull = <GPIO_PULL_UP>;
				drvstr = <GPIO_8MA>;
			};
			emmc_cmd{
				gpio = <12>;
				func = <1>;
				pull = <GPIO_PULL_UP>;
				drvstr = <GPIO_8MA>;
			};
			emmc_clk{
				gpio = <13>;
				func = <1>;
				pull = <GPIO_NO_PULL>;
				drvstr = <GPIO_8MA>;
			};
		};
	};

	pci0: pci@20000000 {
		status = "ok";
		perst_gpio = <38>;
		lane = <1>;
		pci_gpio {
			pci_rst {
				gpio = <38>;
				pull = <GPIO_PULL_UP>;
				oe = <GPIO_OE_ENABLE>;
			};
		};
	};

	pci1: pci@18000000 {
		status = "ok";
		perst_gpio = <47>;
		lane = <2>;
		pci_gpio {
			pci_rst {
				gpio = <47>;
				pull = <GPIO_PULL_UP>;
				oe = <GPIO_OE_ENABLE>;
			};
		};
	};

	ess-switch {
		switch_mac_mode0 = <PORT_WRAPPER_USXGMII>;
		switch_mac_mode1 = <PORT_WRAPPER_USXGMII>;
		aquantia_gpio = <22 24>;
		aquantia_gpio_cnt = <2>;

		port_phyinfo {
			port@0 {
				phy_address = <8>;
				phy_type = <AQ_PHY_TYPE>;
				uniphy_id = <0>;
				uniphy_mode = <PORT_WRAPPER_USXGMII>;
			};
			port@1 {
				phy_address = <0>;
				phy_type = <AQ_PHY_TYPE>;
				uniphy_id = <1>;
				uniphy_mode = <PORT_WRAPPER_USXGMII>;
			};
		};
	};

};