This change will add support for 4K Macronix spi nand
"MX35UF4GE4AD-Z4I"
Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org>
Change-Id: I94e07d9e25de46c67fcb679ef149990e093afc8f
Disabled the cache commands config CONFIG_CMD_CACHE. This changes
removes the icache and dcache commands.
Signed-off-by: Karthick Shanmugham <kartshan@codeaurora.org>
Change-Id: I0cfd4df12e452a15861f0df7f4512234113d315a
'flash wifi_fw' command writes into flash based
on 'rootfs' partition offset. After sysupgrade,
flashing single image at u-boot write wifi firmware
into failsafe partitions because post sysupgarde
primary and failsafe partitions are swapped vice-versa.
Single image always boots with primary partitions, and
the wifi firmware flashed into failsafe partition won't
be loaded subsequently q6 will crash.
This patch resolves issue by using "ubi" command's instead
of "flash wifi_fw" command.
Signed-off-by: Manikanta Mylavarapu <mmanikan@codeaurora.org>
Change-Id: I9a89872ade5cbd753272e11fd15e7b8f06d4f92c
Now, the linux-5.4 image is LZMA compressed enable the LZMA
decompressor support.
Signed-off-by: Kathiravan T <kathirav@codeaurora.org>
Change-Id: Ibfc0d1fb6ffc463182f944bea0aa1d76af7d57b5
Add BT state information to patch dts when the BT is started at bootloader.
Signed-off-by: Amandeep Singh <amansing@codeaurora.org>
Change-Id: Ib88150bb6c8469ec6d63578ce5c4ab21511aff60
This change will add support for Macronix "MX35UF1GE4AC" spi nand
Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
Change-Id: I66e82e22217d655b44e30baa64f3aefd5a5f2aaa
This change will add support for winbond "W25N02JWZEIF"
spi nand device.
Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
Change-Id: I1dd258c3f0f3174d09e74fb7ffd0c26a43e6c24b
This change will add support for giga device GD5F1GQ5REYIG
spi nand support.
Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
Change-Id: I57211ce34543de81216d86653a45519b97cf2fb0
This change will update blsp base address for i2c in
MP03.3rdp. Updated address from 78b6000 to 78b7000.
Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
Change-Id: Idd37550ac4cf012db0dfea16539d5c0948b13f40
Gpio out need to be enabled for
re-spin boards.
Signed-off-by: Manikanta Mylavarapu <mmanikan@codeaurora.org>
Change-Id: I711ed313170fb6268d1d5b9d70f2966bae481241
With latest GCC 4 byte aligned instructions are getting generated for
2 byte aligned data. This is due to the option '-fstore-merging' enabled
by default for '-O2'
This is causing data abort if data cache is disabled.
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Change-Id: Idaac94fcc8e5c61f0ea720ed0c10e908d3688c61
This patch moves the set_platform_specific_default_env
function outside of CONFIG_QCA_MMC as this function is
not dependent on that config.
This will cause unexpected behaviour if suppose MMC
config is disabled.
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
Change-Id: I9bfc35afb054103bfb60b837cff04eed1d94decd
