The "flasherase" command can be used to erase partitions in flash.
Change-Id: I1111f3a626c3a36bcef57079a10c5d6be4e1e8df
Signed-off-by: Pavithra Palanisamy <pavip@codeaurora.org>
This change adds drive-strength property for I2C GPIOs and
modify config_i2c_gpio function to get the drvstr value from dts.
Change-Id: Ieece9e2f9d6abc115a50d87bc512004d3efcad0f
Signed-off-by: Pavithra Palanisamy <pavip@codeaurora.org>
This change is a workaround for Micron eMMC card. As per the card
extended CSD register value, the minimum size of a write protect
region is 0x8000 blocks (16MB). So the user should give start address
and size to align with 0x8000. But this eMMC part actually does
protect 32MB of memory.
We changing the minimum write protect region size from 0x8000 to
0x10000 for Micron eMMC card.
Change-Id: Id53c337374dfba8adb6bd550826337d8ecfe17f3
Signed-off-by: Vinoth Gnanasekaran <vgnana@codeaurora.org>
The Device will accept the requested number of data blocks, terminate
the transaction and return to transfer state. Stop command is not
required at the end of this type of multiple blocks write unless
terminated with an error. This change will send the
STOP_TRANIMISSION command if the command failed.
Change-Id: I9bd419ab8931d80a4a2eeba9f5bd42222257a824
Signed-off-by: Vinoth Gnanasekaran <vgnana@codeaurora.org>
FDTHIGH is moved to 0x48700000 because the FDT
should get loaded within the linux region.
Change-Id: Idabcdeb797fe0e39382b2d3fdb54a4758c495296
Signed-off-by: Antony Arun T <antothom@codeaurora.org>
Adding soc_version_major and soc_version_minor to the default
environment.
Change-Id: I38ee6dd228382111beaa2bdacfade1e3d2c989de
Signed-off-by: Nikhil Prakash V <nprakash@codeaurora.org>
If env variable "low_mem_mode" is set,
wcnss and wifi_dump reserved memory sizes
are reduced to 55M and 2M respectively.
Change-Id: I1412ba16507f809a344ae133a91ae486e54836c5
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
use scm_atomic_call to access the usb_mode_controller
register in u-boot.
Change-Id: I9523f2dcf312fa1526d6b7052e98a0d9489c1701
Signed-off-by: sameeruddin shaik <samesh@codeaurora.org>
This change adds "optional" property to avoid pack error
on unavailability of wififw version-specific binaries and
abort while flashing.
Change-Id: I7351e3e717f12b1e730db710b4364404d177768d
Signed-off-by: Pavithra Palanisamy <pavip@codeaurora.org>
The malibu phy stucks if the continuous tftp, ping and reboot tests in the
long run. Added the Malibu phy serdes and uniphy calibration for PSGMII mode.
Change-Id: Ie2e0dc363689fff69011560994b37adf6da76a17
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
During serial init after relocation, if TX FIFO is
not empty, clock init on-the-fly causes baudrate
flucutation resulting in TX data corruption and
outputs as garbage data on the console.
This patch fixes this by waiting until TX FIFO
gets flushed before serial initialization starts.
Change-Id: I487c73fbfb4fdb80b20d8beb8daa111ee9bae34e
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
Force the crashdump collection based on environment variable. If the
environment varibale force_crashdump is set then we will proceed directly
with the crashdump collection, else we will wait for user input
for 10s before going for crashdump collection.
Change-Id: Ida500bd060dcdd46736e9ea950a0009353abcbf1
Signed-off-by: Nikhil Prakash V <nprakash@codeaurora.org>
ipq6018 CXO is 24 MHz. It is downscaled by 1/100
to 240 KHz for EMU platform.
Change-Id: Id94e4f9cb3516e6d0750d89596c0153018fb9674
Signed-off-by: Antony Arun T <antothom@codeaurora.org>
