mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2025-12-10 08:44:39 +01:00
ff1419f895
This AX3000 flying saucer-shaped device is sold under a few names: - Widelantech WAP430X http://www.widelantech.com/?m=home&c=View&a=index&aid=131 - Felicomm - UeeVii UAP200 (sold on amazon.com) True name, as marked on the PCB and as appears in the DTS, is WAP430X. Hardware: - SoC: Mediatek MT7981B - RAM: 256MiB DDR3 - ROM: 16MiB NOR flash (Winbond 25Q128JVSQ) - Wired: one GbE RJ45 port - Wireless: Mediatek MT7976CN DBDC - Antennas: Internal (two 2.4 GHz 4.5 dBi, three 5 GHz 6 dBi) - GPIO: two blue LEDs (status, WLAN), one button (reset) - Power: DC5521 (12V) or 802.3af PoE (48V 0.3A) - UART: J500 on PCB [3v3] (Rx) (Tx) (Gnd), 115200n Original firmware is GECOOS 8.0_2024081000, a fork of OpenWrt 21.02 created by Widelantech. All ports are closed except 443 (web management interface) and 80 (redirects to 443). UART is locked down, but U-Boot bootloader is friendly. Installation is done via UART (see note below). Method 1: press any key during boot to enter MTK U-Boot bootloader, then choose option 2 (Upgrade firmware) and upload sysupgrade binary via TFTP (or via Xmodem). Method 2: put sysupgrade binary on a webserver (http, not https); after GECOOS loads, choose option 4 (固件在线升级 = online firmware upgrade) in the menu and enter the URL to the sysupgrade binary. Note: GECOOS has a slick web management, and firmware can be uploaded at https://6.6.6.6/#/system/sysupgrade but it's still not clear how to convert the sysupgrade binary to a factory binary accepted by the web interface (WIP). Signed-off-by: Rani Hod <rani.hod@gmail.com> Link: https://github.com/openwrt/openwrt/pull/20402 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> |
||
|---|---|---|
| .. | ||
| base-files | ||
| dts | ||
| files/drivers | ||
| files-6.12 | ||
| filogic | ||
| image | ||
| mt7622 | ||
| mt7623 | ||
| mt7629 | ||
| patches-6.12 | ||
| Makefile | ||
| modules.mk | ||