The realtek target uses some functions marked __init for initialization.
However, that means they can only be called once when compiled in and
afterwards the memory occupied by them is freed and potentially reused.
Some "impossible" (code at a given location can't crash in the way it
does) crashes can be caused by this because upon re-execution of those
functions, garbage gets executed. Such re-execution can happen for
deferred probes or repeated probes.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Link: https://github.com/openwrt/openwrt/pull/21504
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
(cherry picked from commit a91c3abe83)
Link: https://github.com/openwrt/openwrt/pull/21900
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit fixes non-working USB port:
---
[ 5.294036] xhci-mtk 11200000.usb: error -EPERM: Failed to get supply 'vbus'
[ 5.301163] xhci-mtk 11200000.usb: error -EPERM: Failed to get regulators
[ 5.307938] xhci-mtk 11200000.usb: probe with driver xhci-mtk failed with error -1
---
While testing the USB power on/off functionality during the previous
commit, I didn't sufficiently test the actual operation of the USB
devices.
Fixes: ff5e66a920 ("mediatek: add support for Routerich BE7200")
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21795
(cherry picked from commit 2651a6ced9)
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21882
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit adds support for the Cudy AP3000 Wall v1.
SoC: MediaTek MT7981b
RAM: 256MiB
Flash: spi-nand spi0.0: 128 MiB
Wifi: MediaTek MT7981 2x2 DBDC 802.11ax 2T2R (2.4 / 5)
LEDs: 1 LED in two colors (red & white)
Buttons: 1 reset, 1 led on/off
Ethernet: 5x 1GbE
Power: PoE powered (standalone)
The stock firmware is a customized variant of OpenWrt, which implements
a signature check that only allows flashing official firmware. Cudy offers
intermediate OpenWrt firmware images on their website [1][2] which do not
implement the signature check. After flashing the intermediate image the
upstream official OpenWrt image can be installed.
The stock firmware can be recovered via TFTP using the U-Boot based boot
loader[3]. Set up a TFTP server on your computer with IP 192.168.1.88/24
serving the stock firmware from Cudy's website renamed to "recovery.bin".
Press and hold the reset button while powering on the device, wait for the
TFTP server to send the recovery.bin file, then release the reset button.
The router will take a couple of minutes to reboot and set up the stock
firmware.
[1] https://www.cudy.com/blogs/faq/openwrt-software-download
[2] https://drive.google.com/drive/folders/1BKVarlwlNxf7uJUtRhuMGUqeCa5KpMnj
[3] https://www.cudy.com/en-us/blogs/faq/how-to-recovery-the-cudy-router-from-openwrt-firmware-to-cudy-official-firmware
Signed-off-by: Derek Denk <derek.denk@live.com>
Link: https://github.com/openwrt/openwrt/pull/21266
(cherry picked from commit afad4c71f8)
Link: https://github.com/openwrt/openwrt/pull/21890
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The MT7531 has an incorrect interrupt number described in the DTS.
This commit also adds PHY interrupts. They work the same as on
the MT7988.
Tested on Gemtek W1700k.
Suggested-by: Benjamin Larsson <benjamin.larsson@genexis.eu>
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://github.com/openwrt/openwrt/pull/21016
(cherry picked from commit 788958880b)
Link: https://github.com/openwrt/openwrt/pull/21838
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Bc-bocun Chen of MediaTek has discovered a memory leak in the error path
in our downstream patch for mtk_eth_soc which adds support for the 10G
PCS and PHY paths of the MT7988 SoC.
Fix this by freeing the at this point already allocated netdev resources
before returning the error.
Fixes: 4cb6bd9a6d ("mediatek: switch to pending XFI 10G Ethernet drivers")
Reported-by: Bc-bocun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 4d71c767c4)
The D-Link DIR-1360 A1 is an AC1300 router based on the MT7621AT SoC.
Specifications :-
* SoC: MediaTek MT7621AT
* RAM: 256 MB DDR3
* Flash: 128 MB SPI NAND (Winbond W29N01HV)
* WiFi: MT7615D (2.4 GHz + 5 GHz DBDC)
* Ethernet: 5x 10/100/1000 Mbps (1x WAN, 4x LAN)
* USB: 1x USB 3.0
* Buttons: Reset, WPS
* LEDs: Power (White/Orange), Internet (White/Orange), USB, 2.4G/5G WLAN
MAC addresses are retrieved from the 'factory' partition via NVMEM.
LAN: 0xe000 (gmac0)
WAN: 0xe006 (gmac1)
WLAN: 0xe00c (pcie0)
Flash Instruction :-
1-Set a static IP on your PC (e.g., 192.168.0.10, Gateway 192.168.0.1).
2- Power off the router and connect your PC to a LAN port.
3- Hold the Reset button and power on the router; continue holding for 5 seconds.
4- Access the Recovery UI at http://192.168.0.1 in your browser.
5- Upload the OpenWrt factory.bin image and wait for the reboot.
With these definitions in place, the DIR-1360 A1 boots reliably, exposes all hardware features correctly, and can be flashed via both the OEM recovery interface and standard OpenWrt upgrade paths.
Signed-off-by: Aryaman Srivastava <aryamansrivastava895@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21616
(cherry picked from commit 7a8e2efed5)
Link: https://github.com/openwrt/openwrt/pull/21826
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Part of the phy patch process breaks functionality on non-Realtek
platforms. Only apply this on Realtek SoCs to fix functionality
everywhere else.
Signed-off-by: Andrew LaMarche <andrewjlamarche@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21777
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 268a0cb363)
Link: https://github.com/openwrt/openwrt/pull/21799
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The u-boot-env partition on the Zyxel P-2812HNU-F1 is 128 KiB but
the actual environment data is only 8 KiB (0x2000 bytes). Without
the env-size property, the u-boot,env nvmem layout driver assumes
env-size equals the full partition size and computes an incorrect
CRC32 over the entire 128 KiB, causing all nvmem cell reads to fail
silently.
Add env-size = <0x2000> so the CRC32 is computed over the correct
8 KiB region, allowing nvmem-cells (such as ethaddr) to be read
properly by the kernel.
Signed-off-by: Burak Aydos <byhexadecimal@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21780
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 6952844436)
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This reverts commit 53a525f346.
Linux 6.12.67 broke ipip6 tunnel (DS-Lite) and MAP-E.
Revert this Linux kernel bump till the problem is fixed.
Fixes: https://github.com/openwrt/openwrt/issues/21737
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Migration of the eDPU DTS to upstream one broke the eDPU plus model
since the required ethernet aliases are missing and U-Boot then cannot
find the required ethernet nodes.
So, after sending the required fix upstream, lets apply it in OpenWrt
as well.
Fixes: 9852dda410 ("mvebu: move DTS diff into a patch for Methode uDPU")
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
(cherry picked from commit 3353827fb5)
Add the loop module and mkfs tool to use f2fs/ext4
based overlays. This fixes the following bug:
mount_root: unable to create loop device
mount_root: no usable overlay filesystem found, using tmpfs overlay
Fixes: 99545b4bb1 ("d1: add new target")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
(cherry picked from commit 1e7950a45d)
The USB of most d1 devices works in otg or peripheral mode.
Enable this feature to use usbgadget and fix musb errors:
musb-sunxi 4100000.usb: Invalid or missing 'dr_mode' property
musb-sunxi 4100000.usb: probe with driver musb-sunxi failed with error -22
Fixes: 99545b4bb1 ("d1: add new target")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
(cherry picked from commit 81580cc92c)
The CONFIG_SOFTLOCKUP_DETECTOR_INTR_STORM option shows up when the
OpenWrt option CONFIG_KERNEL_SOFTLOCKUP_DETECTOR is activated.
Link: https://github.com/openwrt/openwrt/pull/21710
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit bf9e90c94e)
The indicator is unused by default and not associated
with the wan port. So let’s fix this.
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21635
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 46ff60ce02)
This is a cosmetic change. There is no need to use mac
address increment/decrement in the dts on these devices,
so this can be simplified.
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21635
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 9bcfe7b76f)
In the original DTS from the device firmware, there are
no entries that enable SPI calibration. Therefore, it
should be disabled.
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21635
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 299105441a)
Keenetic devices always use the WAN port MAC address as
the MAC address printed on the label.
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21635
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 5c195add76)
Add two missing $$ in the factory image build pipeline for MR6350
Signed-off-by: Zeyu Dong <dzy201415@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21682
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 979f70cc7e)
Now that DCB is enabled by default, it makes sense to include it on
lan969x.
While we are here, lets include ip-bridge as these devices are switches
and the Busybox applet does not expose enough functionality.
These devices have no space constraints.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
(cherry picked from commit 51710e9dd4)
Update the DTS to the latest pending upstream version, it looks like this
should get merged soon upstream.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
(cherry picked from commit 19e097e18a)
Interrupts for DWC3 node were completely mixed up - SPI interrupt 62 is
not listed in reference manual at all. It was also causing dtbs_check
warnings:
ipq5018-rdp432-c2.dtb: usb@8af8800 (qcom,ipq5018-dwc3): interrupt-names:0: 'pwr_event' was expected
ipq5018-rdp432-c2.dtb: usb@8af8800 (qcom,ipq5018-dwc3): interrupt-names: ['hs_phy_irq'] is too short
Warning itself was introduced by commit 53c6d854be4e ("dt-bindings: usb:
dwc3: Clean up hs_phy_irq in binding"), but this was trying to bring
sanity to the interrupts overall, although did a mistake for IPQ5018.
IPQ5018 does not have QUSB2 PHY and its interrupts should rather match
ones used in IPQ5332.
Correct it by using interrupts matching the bindings and reference
manual.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21454
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit e1a9636959)
In IPQ5018, the reference clock to the CMN PLL block from the on-board
Wi-Fi has its divider set to 2. This divider wasn't taken into
consideration when calculating the CMN PLL clock rate which meant the
resulting clock rate was doubled.
With the reference clock divider being accounted for in the driver,
correct the assigned clock rate to 4.8GHz.
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21453
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit d6ab889e45)
Add missing dt-bindings/include files needed for compilation of driver.
Enable compilation of the CMN PLL driver by adding the symbols to
Kconfig and Makefile.
Fixes: 468975a985 ("qualcommax: ipq50xx: backport upstreamed patches for adding ipq5018 CMN PLL support")
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21453
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit fdce6f99be)
This is tri-band WiFi6E capable router. Also Zyxel Nebula managed so no real local GUI. To open device 4 screws must be located uder the label.
Four latches are on front and two on each side. Better start from ethernet port side where 3 small latches are easy to handle.
FCC shows It's identical to WSQ65 sold as Zyxel Multy M6E but that's nowhare to be found yet. WSQ65 is not covered by this PR
Speficiations:
* SoC: Qualcomm IPQ5018
* RAM: 1GB DDR3
* Flash: Winbond W25N02KWZEIR 256MB
* UART: PCB "J3" is located left from front LED strip
(VCC/TX/RX/ /GND) 3.3V 115200n8
* Wi-Fi1: IPQ5018 (2x2 2.4 Ghz 802.11b/g/n/ax)
* Wi-Fi2: QCN6102 (2x2:2 5 Ghz 802.11an/ac/ax)
* Wi-Fi3: QCN6122 (2x2:2 6 Ghz 802.11an/ac/ax)
* Ethernet: QCA8337 4xLAN 1Gbit / 1xWAN 1Gbit
* Buttons: WPS , Reset
* LEDs: 13 in total
RGB power, RGB wan, RGB status (cloud), RGB wifi, Green wps
* FCCID: I8803891
*Flash Instructions starts with getting root:
connect uart to J3 connector next to the front LEDs
go to failsafe when this shows up in log:
"Press the [f] key and hit [enter] to enter failsafe mode"
execute:
mount_root
passwd -d root
reboot
logon as root:
look for 'Please press Enter to activate this console.'
login is root password is empty
execute:
fw_setenv DebugFlag=0x1
fw_setenv bootdelay=0x2
passwd -d root
backup ubi partition "rootfs" into safe space
reboot
*OpenWrt installation
stop uboot and execute:
setenv ipaddr 192.168.1.1
setenv serverip 192.168.1.10
tftpboot *-factory.ubi
flash rootfs
reset
or:
tftpboot *-initramfs-uImage.itb
bootm
use sysupgrade as usual
*restore OEM from backup
stop uboot and execute:
setenv ipaddr 192.168.1.1
setenv serverip 192.168.1.10
tftpboot *-initramfs-uImage.itb
bootm
transfer rootfs.bin backup and execute:
ubiformat /dev/mtd16 -y -f /tmp/rootfs.bin
Signed-off-by: Robert Senderek <robert.senderek@10g.pl>
Link: https://github.com/openwrt/openwrt/pull/21042
(cherry picked from commit f948f71300)
Link: https://github.com/openwrt/openwrt/pull/21440
Signed-off-by: Robert Marko <robimarko@gmail.com>
The vr9.dtsi configures the GPIO 38 as reset GPIO. Also the fon LED is
configured on GPIO 38. This conflicts and makes the probing of the PCIe
controller fail in OpenWrt 25.12.
The AVM GPL source code configured GPIO 21 as PCIe reset.
Fixes: https://github.com/openwrt/openwrt/issues/21562
Link: https://github.com/openwrt/openwrt/pull/21641
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit a4285d7cc0)
On some SoCs like RK3399, U-Boot no longer export the serial
address in $stdout variable, it has been changed to something like
`stdout=serial,vidconsole` since video supported was added. So
detect $soc variable instead, this also makes the script more clear.
Addtional note: rk3566 is reported as rk3568, rk3582 is reported as
rk3588 in $soc.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/21610
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 609deedd87)
Hardware:
- RK3528 SoC
- 1x USB 2.0
- 8/32GB eMMC
- 1/2/4GB LPDDR4
- 1x 1GbE RTL8111H
- 1x 1GbE RTL8211F
- MicroSD card slot
Installation:
Use dd or balenaEtcher to flash the firmware.
Note:
The RK3528 SoC does not support MSI-X, so it can't
adjust the interrupts of r8169 to other CPU cores.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
(cherry picked from commit e8997e7e03)
Use the unique MAC address in EEPROM for eth0.
The MAC address of RTL8111H (eth1) is correct.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
(cherry picked from commit 7a07d38f33)
The WAN(eth1) port LED on the Radxa E20C is completely off.
Since the r8169 driver supports configuring LEDs, using it.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
(cherry picked from commit dccfc10957)
ASUS RT-AC3200 and ASUS RT-AC5300 are AC3200 and AC5300 routers,
respectively, featuring 5 Ethernet ports over the integrated Broadcom
switch.
ASUS RT-AC3200 hardware info:
* Processor: Broadcom BCM4709A0 dual-core @ 1.0 GHz
* Switch: BCM53012 in BCM4709A0
* DDR3 RAM: 256 MB
* Flash: 128 MB
* 2.4GHz: BCM43602 3x3 single chip 802.11b/g/n SoC
* 5GHz: BCM43602 3x3 two chips 802.11a/n/ac SoC
* Ports: 4 LAN Ports, 1 WAN Port
ASUS RT-AC5300 hardware info:
* Processor: Broadcom BCM4709C0 dual-core @ 1.4 GHz
* Switch: BCM53012 in BCM4709C0
* DDR3 RAM: 512 MB
* Flash: 128 MB
* 2.4GHz: BCM4366 4x4 single chip 802.11b/g/n SoC
* 5GHz: BCM4366 4x4 two chips 802.11a/n/ac SoC
* Ports: 4 LAN Ports, 1 WAN Port
Flashing instructions:
* Boot to CFE Recovery Mode by holding the reset button while power-on.
* Connect to the router with an ethernet cable.
* Set IPv4 address of the computer to 192.168.1.2 subnet 255.255.255.0.
* Head to http://192.168.1.1.
* Reset NVRAM.
* Upload the OpenWrt image.
CFE bootloader may reject flashing the image due to image integrity check.
In that case, follow the instructions below.
* Rename the OpenWrt image as firmware.trx.
* Run a TFTP server and make it serve the firmware.trx file.
* Run the URL below on a browser or curl.
http://192.168.1.1/do.htm?cmd=flash+-noheader+192.168.1.2:firmware.trx+flash0.trx
Signed-off-by: Chester A. Unal <chester.a.unal@arinc9.com>
(cherry picked from commit 4284d56568)
Due to PTP conflicts with CONFIG_ALL_KMODS which causes the end images
to end up with no switchdev driver included, lets switch to using the
switchdev and PHY drivers as modules instead.
Fixes: 88a404a2d1 ("microchipsw: add support for Microchip LAN969x switches")
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
(cherry picked from commit b300a9e63d)
This reverts commit 7390e63374.
This broke SFP handling on some Mediatek SoCs.
Some SFPs are configured for inband/2500base-x link mode and were
rejected with this change.
Fixes: https://github.com/openwrt/openwrt/issues/21436
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 8076376aca)
