Add Realtek RTL8822CS support to the rtw88 package.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/20423
Signed-off-by: Nick Hainke <vincent@systemli.org>
The DSA driver must flush the HW FDB when a port changes from
learning/forwarding to disabled/blocking/listening.
But the implementation for RTL931x was writing the port information
starting at bit 11 (bit 11 of the second 32-bit L2_TBL_FLUSH_CTRL
register). But this offset is the AGG_VID and not the port. The actual
position is 43 (bit 11 of the first register).
As result, the FDB was always only flushed for the port 0 and not for the
selected port.
Fixes: 9ed6097054 ("realtek: Add HW support for RTL931X for PIE, L2 and STP aging")
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20422
Signed-off-by: Robert Marko <robimarko@gmail.com>
the eth1 interface was renamed to wan so also reflect that change in
the leds setup script
Fixes: f26260c7e7 ("mediatek: filogic: Add label wan and cpu for Zyxel EX5601-T0")
Signed-off-by: Andrew Sim <andrewsimz@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20120
Signed-off-by: Nick Hainke <vincent@systemli.org>
BPDU frames like STP must be processed by each switch (bridge) which
supports STP. It must not be forwarded to avoid confusing the STP state of
other STP participants. It is essential to be an active participant of STP.
The software bridge automatically takes care of forwarding the BPDUs to
other ports when STP is disabled and the hardware switch should not
interfere.
Signed-off-by: Harshal Gohel <hg@simonwunderlich.de>
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20414
Signed-off-by: Robert Marko <robimarko@gmail.com>
With this patch is set the maximum number of connections per ip address instead of no control.
The default is 8.
Signed-off-by: Andrea Pesaresi <andreapesaresi82@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20377
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
backport from kernel 6.12
ksmbd.mount will give each interfaces list and bind_interfaces_only flags
to ksmbd server. Previously, the interfaces list was sent only
when bind_interfaces_only was enabled.
ksmbd server browse only interfaces list given from ksmbd.conf on
FSCTL_QUERY_INTERFACE_INFO IOCTL.
Signed-off-by: Andrea Pesaresi <andreapesaresi82@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20377
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This patch resolves the LAN port not initializing on the
FriendlyElec NanoPI R4S, especially during warm reboots.
Upstream commit patch is based on:
c3fe7071e1
I've experienced the LAN port failing to initialize from a cold boot and
after a reboot. Other users have reported this issue on
https://forum.openwrt.org/t/nanopi-r4s-rk3399-is-a-great-new-openwrt-device/79143.
The NanoPI R4S has its LAN port connected to the RK3399 via PCIE. Since the
PCIE lanes don't initialize correctly after reboot, the LAN port
doesn't initialize.
Signed-off-by: Timothy Feierabend <tim.feierabend@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20406
Signed-off-by: Nick Hainke <vincent@systemli.org>
Now that we have a board file, add calibration variant for TP-Link
Archer C59 v1 and add ipq-wifi package for it.
Tested-by: Mateusz Jończyk <matjon@users.noreply.github.com>
Signed-off-by: Christoph Krapp <achterin@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20401
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add IPQ Wifi entry for ath79 TP-Link Archer C59 v1.
Signed-off-by: Christoph Krapp <achterin@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20401
Signed-off-by: Robert Marko <robimarko@gmail.com>
Fix trivial compilation warning caused by downstream full print patch.
../src/app_list.c: In function 'print_full':
../src/app_list.c:85:35: warning: format '%zu' expects argument of type 'size_t', but argument 2 has type 'uint64_t' {aka 'long long unsigned int'} [-Wformat=]
85 | printf("Installed-Size: %zu\n", pkg->installed_size);
| ~~^ ~~~~~~~~~~~~~~~~~~~
| | |
| | uint64_t {aka long long unsigned int}
| unsigned int
| %llu
../src/app_list.c:86:25: warning: format '%zu' expects argument of type 'size_t', but argument 2 has type 'uint64_t' {aka 'long long unsigned int'} [-Wformat=]
86 | printf("Size: %zu\n", pkg->size);
| ~~^ ~~~~~~~~~
| | |
| | uint64_t {aka long long unsigned int}
| unsigned int
| %llu
../src/app_list.c:58:31: warning: unused variable 'd' [-Wunused-variable]
58 | struct apk_dependency d;
Remove unused variable and use PRIu64 to handle uint64_t type.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add 3 pending patch that improve binary reproducibility. The first
address a problem with RPATH string not getting cleared on removal of
RPATH entry from ELF section. The other 2 skip including external shared
library in RPATH in meson build phase.
This follows the logic that on cross-compiling we can't run the binary
anyway as it does target a different arch hence it doesn't make sense to
include those extra path in RPATH causing reproducibility problems (as
path for those external library will depend on the build system path)
Link: https://github.com/openwrt/openwrt/pull/20389
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Commit 468975a985 changed the XO board clock definition from a fixed
clock to a fixed rate clock in the dtsi.
As such, boards must use clock dividers and multipliers to calculate
the clock rate based on the referenced parent clock.
Fixes: 5d2994a73e ("qualcommax: ipq50xx: Add support for Yuncore AX850")
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/20405
Signed-off-by: Robert Marko <robimarko@gmail.com>
Fix a regression introduced by a recent commit.
It looks like a copy/paste error.
Add the missing line which defines the 'board' val
as it does not exist otherwise in the case check.
This fixes sysupgrade on ath79 MikroTik non-NOR boards.
Fixes: 318f07c231 ("ath79: mikrotik: check RouterBOOT version matching sysupgrade image")
Signed-off-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
Add pending patch to address PCI sysfs creation entry race observed on
ipq806x. This is to handle a kernel warning on creating the same sysfs
entry multiple times.
All affected patch automatically refreshed.
Link: https://github.com/openwrt/openwrt/pull/18989
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Adapt OPP patch with upstream changes to cpufreq driver. Use the krait
compatible and the new opp-supported-hw way instead of deleting nodes.
Link: https://github.com/openwrt/openwrt/pull/18989
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
The 6.12 testing kernel for ipq806x target is ready now.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18989
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
- Reuse the bridges node defined on "qcom-ipq8064.dtsi".
- Rename PCIe device nodes to unified "wifi@0,0".
- Add the missing "qcom,ath10k" compatibles.
- Remove unseless property "interrupt-controller". There are no
consumers use these PCIe devices as interrupt controllers.
- Change bus number from 0 to 1, just like other ipq806x devices.
The valid PCIe bus range on this platform is 1 - 255.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18989
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add bridge node labels so that we can insert PCIe peripheral nodes.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18989
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Copy patches and kernel configs from 6.12 kernel to restore the
default 6.6 kernel support files.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18989
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This is a preparation for 6.12 kernel support. It can help us
track the patches and Kconfig history by using the Git tool.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18989
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This is a preparation for introducing the 6.12 kernel support.
All configs are automatically refreshed. In theory, they will
generate the same .config files in the kernel build directory
as before.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18989
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
To produce consistent source entry for package compiled from non-SDK and
SDK build, set the "--root=package" flag for the base feed.
This will set the root directory for the base feed to the OpenWrt
core repository "package" directory.
This fix the reproducible problem of package build from SDK that have
the source entry set to "feeds/base/package/..." for every package
coming from the base feed.
Link: https://github.com/openwrt/openwrt/pull/20396
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Some feeds might need to set the source for their packages in a
different directory than the cloned one.
For example a feed "test" might be an entire repository and the relevant
packages that wants to be included are in the directory "foo".
In such scenario the source info in the package will result in something
like "feeds/test/foo/network/dnsmasq" instead of an expected entry like
"feeds/test/network/dnsmasq".
To give a more real-world example, this problem is currently present
with OpenWrt SDK where the SDK clone the entire OpenWrt core repository
as "base" feeds but the package are present in the "package" directory.
This cause every package to have the source entry set to
"feeds/base/package/..." conflicting with what a non-SDK build do with
setting the source entry to "feeds/base/..."
To solve this, actually enable support for "flags" in the feeds script
and implement a new option "--root" to set the root directory for the
defined feed to an inner directory.
The "flags" in the feed script are no more than argument option that can
be defined right after the "src-" type in the feed.conf file.
This feature was partially implemented but never actually used for
anything keeping it dormant with all the core piece there (the pattern
regex always accounted for these extra option but they were never passed
to the relevant functions)
An example of the "--root" flag is the following:
src-git --root=package base https://git.openwrt.org/openwrt/openwrt.git;main
With "--root" defined, the script will append "_root" to the feed name
clone directory and will create a symbolic link named with the feed name
and pointing to the feed name clone directory + the value in root.
From the previous example:
feed name: base -> clone directory: base_root
symbolic link: base -> base_root/package
The script internally reference the "_root" directory for every update
operation and OpenWrt build system transparently use the feed name
directory to reference feed packages producing consistent source info
entry.
Link: https://github.com/openwrt/openwrt/pull/20396
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Currently wifi-scripts ucode appends airtime_mode to hostapd config file
unconditionally.
However this breaks bringing up interface with hostapd-mini
because the mini variant doesn't support airtime policy.
Fix this by changing the script to append airtime_mode only when
airtime_mode is set to greater than zero value in /etc/config/wireless.
Fixes: #20136Fixes: #20314
Signed-off-by: Zhi-Jun You <hujy652@protonmail.com>
Update the version of uboot-ath79 package to U-Boot v2025.10 release.
Tested on:
- NEC Aterm WG600HP (AR9344)
- NEC Aterm WG1400HP (QCA9558)
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20358
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Right now the phylink capability function enables 2.5G and 10G modes on
Maple and Cypress, which they mostly (other than two SERDES on Cypress)
don't support. This causes these modes to be selected and break the link
as they are not supported by hardware.
I looked into doing this properly, but it cannot just be done based on
SoC, but needs to take the whole topology into account as a given MAC
might have very different capabilities depending on what SERDES are
assigned to it. So for now just use 1G and QSGMII for RTL83xx and 10G
for RTL93xx. This mostly works, except it will downgrade some 10G links
on RTL839x, but since there are also 1G SFPs on these this cannot be
solved without fully accounting for the global MAC and SERDES
configuration.
So this makes all of the 1G SFP slots work again, while keeping most of
the 10G SFP+ slots working at 10G with minimal changes.
Signed-off-by: Lorenz Brun <lorenz@brun.one>
Link: https://github.com/openwrt/openwrt/pull/20374
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
If the devicetree contains the appropriate nodes to configure the MAC
addresses for each physical DSA port, then these MAC addresses must be used
in OpenWrt and not some automatically generated ones. Otherwise the device
often ends up with addresses which are locally administered and not
matching any expected port-to-MAC scheme.
Devices which only get the MAC address for eth0 must still auto-generate
these MAC addresses until the devicetree was updated to also include the
correct ones.
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20241
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
If the lan_mac cannot be found, it is still used (as empty string) in
various operations. This is not valid and other 02_network scripts checking
for a non-empty string before using it. This should also be adopted for the
realtek 02_network.
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20241
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Having everything in a big script without any structure makes it
unnecessary hard to get an overview or modify it without triggering
unexpected side effects.
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20241
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The preferred prefix for the Realtek DSA driver code is "rtldsa" and no
longer "rtl83xx". This makes sure that the different drivers have
non-conflicting prefixes and because of this non-conflicting function
names.
Suggested-by: Felix Baumann <felix.bau@gmx.de>
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20360
Signed-off-by: Robert Marko <robimarko@gmail.com>
The RTL930x and the RTL931x SoC families share the same struct
dsa_switch_ops. This should be represented in the name of the object.
Suggested-by: Felix Baumann <felix.bau@gmx.de>
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20360
Signed-off-by: Robert Marko <robimarko@gmail.com>
If two ports are in isolation mode then these ports are not supposed to be
able to communicate between each other. This can be achieved in the realtek
switch by removing the other isolated port(s) from the port list of an
isolated port.
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20360
Signed-off-by: Robert Marko <robimarko@gmail.com>
The realtek driver is now in full control of the port matrix. It doesn't
need to rely on the current state of the HW to adjust it. The new port
matrix is calculated automatically using rtldsa_update_port_member() and
then written to the registers/tables.
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20360
Signed-off-by: Robert Marko <robimarko@gmail.com>
