Userspace handling is deprecated.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20176
Signed-off-by: Robert Marko <robimarko@gmail.com>
Userspace handling is deprecated.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20176
Signed-off-by: Robert Marko <robimarko@gmail.com>
Upstream will get support for the Realtek ECC engine with 6.18.
To make use of this in Openwrt
- backport upstream patches
- change config so that ECC will be built for nand subtargets
- define ECC engine in RTL93xx DTS.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/19746
Signed-off-by: Robert Marko <robimarko@gmail.com>
During testing, we discovered that when adding a new offload FDB rule
on certain VLANs and then delete it, does not work as expected.
Steps to Reproduce:
* Create VLAN 4094 on the port lan1:
bridge vlan add vid 4094 dev lan1 pvid
* Add a new FDB entry on port lan1 for VLAN 4094:
bridge fdb add 00:01:02:22:33:44 dev lan1 vlan 4094 master permanent
* Delete the new FDB entry on port lan1 for VLAN4094
bridge fdb del 00:01:02:22:33:44 dev lan1 vlan 4094 master permanent
Root Cause:
The failure occurs because the hash_msb flag is not set correctly
based on the VLAN ID when adding a new L2 entry.
Signed-off-by: Issam Hamdi <ih@simonwunderlich.de>
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20183
Signed-off-by: Robert Marko <robimarko@gmail.com>
Align GS1900-10HP dts with other realtek devices to reduce the risk of device
specific regressions with the upcoming driver cleanup/rewrite.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Link: https://github.com/openwrt/openwrt/pull/20228
Signed-off-by: Robert Marko <robimarko@gmail.com>
Parse the pcs-handle property regardless of phy-handle
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Link: https://github.com/openwrt/openwrt/pull/20228
Signed-off-by: Robert Marko <robimarko@gmail.com>
Check if the uploaded image matches the version of RouterBOOT before
proceeding with sysupgrade on MikroTik devices with NOR flash.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
RouterBOOT v7 for NOR devices does not support the historic yaffs
"kernel" ELF boot method.
Generate a compatible kernel
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
RouterBOOT v7 for NOR devices does not support the historic yaffs
"kernel" ELF boot method.
Generate a compatible kernel
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
RouterBOOT v7 for NOR devices does not support the historic yaffs
"kernel" ELF boot method.
Generate a compatible kernel
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Add missing syscon compatible for scuclk node.
Fix the unit-address of the scuclk node.
This fixes the pcs driver error:
airoha-pcs 1fa08000.pcs: probe with driver airoha-pcs failed with error -22
airoha-pcs 1fa09000.pcs: probe with driver airoha-pcs failed with error -22
Fixes: c3d70b1 ("airoha: en7581: Add support for external PHY")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/20190
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
The pinctrl driver for airoha was expecting a function name that was
not a string, but was passed one. Removing #string fixed this issue.
Fixes: c5b12fc ("airoha: Introduce support for Airoha AN7583 SoC")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/20190
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This patch already exists in generic/backport-6.12.
Fixes: 122135b ("airoha: an7581: add support for kernel 6.12")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/20190
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
All devices under airoha use dts directory under the target,
so update the default DEVICE_DTS_DIR. Also set the default
DEVICE_DTS based on the SoC name for non-dev boards.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/20190
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add support for swapping the Serdes TX line on RTL8261N PHYs.
This is used on an Arcadyan Mozart board where the Serdes TX is swapped
on the PHY (instead of on the Soc) to permit support of SFP module by
using toggling the integrated MUX.
Link: https://github.com/openwrt/openwrt/pull/20227
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Update with make kernel_oldconfig CONFIG_TARGET=target. Also disable
CONFIG_POSIX_MQUEUE, as it's available in the OpenWrt configuration.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
This is an automatically generated commit which aids following Kernel patch
history, as git will see the move and copy as a rename thus defeating the
purpose.
For the original discussion see:
https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
This is an automatically generated commit.
When doing `git bisect`, consider `git bisect --skip`.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Userspace handling is deprecated.
Also convert custom LED to one handled by ath9k.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20112
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Upstream DTS in 6.12 contains many changes from our copy.
Move the remaining diff, which is LED aliases, USB ports and partition
labels into a patch and drop the full copy.
Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
Link: https://github.com/openwrt/openwrt/pull/19786
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Upstream DTS in 6.12 is almost identical to our copy.
Move the partition label change into a patch and drop the full copy.
Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
Link: https://github.com/openwrt/openwrt/pull/19786
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Upstream DTS in 6.12 is almost identical to our copy.
Move LED and partition tweaks into a patch and drop the full copy.
Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
Link: https://github.com/openwrt/openwrt/pull/19786
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Upstream DTS is almost identical to our copy. Move network aliases and
phy-mode into a patch and drop the full copy.
Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
Link: https://github.com/openwrt/openwrt/pull/19786
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Upstream DTS in 6.12 is almost identical to our copy.
The only non-trivial difference is ethernet aliases. Move this change
into a patch and drop the full copy.
Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
Link: https://github.com/openwrt/openwrt/pull/19786
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
All changes to the DTS have been applied upstream, remove our DTS copy.
This change effectively drops the workaround for the 2500Base-x
interface which was broken until kernel 5.15 and removes redundant
address-/size-cells.
Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
Link: https://github.com/openwrt/openwrt/pull/19786
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Point the driver to the precal section of the emmc "factory" partition.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Link: https://github.com/openwrt/openwrt/pull/20154
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Replace the hotplug script with nvmem now that loading data from emmc
partitions is supported.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Link: https://github.com/openwrt/openwrt/pull/20154
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Avoids the occacial lost race, where VAPs are created before the hotplug
script has updated the phy mac address.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Link: https://github.com/openwrt/openwrt/pull/20154
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Prior to the deletion of the old IXP4xx codebase we supported
Actiontec MI424WR A, C and D.
This brings back the support using the upstream device trees
from Linux.
Link: https://github.com/openwrt/openwrt/pull/20066
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This corrects the WRV54G device tree and adds patches for
MI424WR alongh with GPIO MMIO support for the same.
Link: https://github.com/openwrt/openwrt/pull/20066
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add missing bluetooth support btif in dts.
Signed-off-by: Elwin Huang <s09289728096@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20181
Signed-off-by: Robert Marko <robimarko@gmail.com>
Introduce initial support for Airoha AN7583 SoC and add all the required
patch for basic functionality of the SoC.
Airoha AN7583 is based on Airoha EN7581 SoC with some major changes on
the PHY handling and Serdes. It can be see as a lower spec of EN7581
with modern and simplified implementations.
All the patch are sent upstream and are pending revision. Support for
PCIe and USB will come later as soon as DT structure is accepted
upstream.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
To correctly init the CPUFreq driver, CPUFREQ_DT is needed. While at it
also enable CPU HOTPLUG kconfig to support hotplug of secondary CPU.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This add a pending version of the Airoha PCS driver to add support for
External PHY. The Airoha PCS driver will receive some minor modification
once we the PCS subsystem will be defined upstream.
Add all the required node for GDM2 and GDM4 and enable the PCS config.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
There are SFP modules which only work if auto-negotiation is disabled,
like some "OEM SFP-2.5G-T" modules. This also seems to be necessary for
RTL8226/RTL8221B PHYs when using 2500Base-X.
However, currently, it is always enabled, so add support for configuring
it to make these SFP modules and PHYs work.
This also adds locking which should be useful for future extension of
the PCS driver.
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Link: https://github.com/openwrt/openwrt/pull/19518
Signed-off-by: Robert Marko <robimarko@gmail.com>
Now that MDIO and DSA driver only look for pcs-handle drop all
usages of the sds property.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/20148
Signed-off-by: Robert Marko <robimarko@gmail.com>
In the Realtek dts the pcs-handle property at the switch port is the
successor of the sds property at the phy. Rearrange the MDIO and DSA
driver so they always look at the new attribute.
Remark! This code can be dropped completely if the new PCS driver
is fully featured. But this will take some time.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/20148
Signed-off-by: Robert Marko <robimarko@gmail.com>
Switch Airoha targets to 6.12 and drop 6.6 support.
Signed-off-by: Andrew LaMarche <andrewjlamarche@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20137
Signed-off-by: Robert Marko <robimarko@gmail.com>
