Move the configuration of 1000Base-X mode into its own function. This
way, redundant code can be replaced by a single function call.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21184
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Reorder the modes within the switch statement in
rtpcs_931x_sds_config_mode to have a proper and non-confusing order.
Have fiber modes first and MII modes after, and sort all modes in
ascending speed/capabilities order.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21184
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Pass the SerDes hardware mode to rtpcs_931x_sds_config_mode instead of
the PHY_INTERFACE_MODE_* mode and use it. Replace matched modes
accordingly.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21184
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The PCS driver is intended to use a dedicated hardware mode in the
future because the hardware capabilities and modes of the SerDes do not
align with the PHY_INTERFACE_MODE_* modes.
For the beginning, use the previously introduced generic mode mapping
in the SerDes setup and assign the determined hardware mode to the
corresponding field of a SerDes instance. This allows parallel usage of
both mode representations for the time being, until the phy_interface_t
modes can be dropped from internal functions completely.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21184
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Slim the rtpcs_931x_setup_serdes entrypoint by moving the SerDes
configuration sequences for the different SerDes modes into a dedicated
function called rtpcs_931x_sds_config_mode. They form a logical block
similar to what the SDK does and can be taken out to follow the
'divide & conquer' principle.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21184
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Configuring USXGMII on RTL931X was disable because it is not setup
properly right now. Affected devices need to rely on U-boot setup for
now. However, it is not the proper way to return an error in case we
just want to skip USXGMII configuration. Thus, just return 0 in that
case indicating it is properly configured.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21184
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add a generic mapper for mapping the PHY_INTERFACE_MODE_* modes to the
SerDes hardware modes RTPCS_SDS_MODE_*. This is to be used by all
subtargets step-by-step and avoids having subtarget-specific code for
that simple mapping.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21184
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Rename the mode field in rtpcs_serdes from 'mode' to 'hw_mode' to make
clear what it actually is, to avoid confusion with the phy_interface_t
'mode' usually passed to functions.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21184
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Rename them to follow the rtl836x driver gpiod changes.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21143
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This is the recommended way for the OF based platform.
Tested-on TP-Link TL-WR2543N with RTL8367 switch:
```
root@OpenWrt:~# dmesg |grep -i rtl
[ 7.941126] rtl8367 rtl8367: cannot find mdio node phandle
[ 7.947562] rtl8367 rtl8367: RTL8367R ver. 0 chip found
[ 9.056830] rtl8367 rtl8367: cpu_port:9, assigned to extif0
root@OpenWrt:~# cat /sys/kernel/debug/gpio
gpiochip0: GPIOs 512-529, parent: platform/18040000.gpio, 18040000.gpio:
gpio-512 ( |lime:status ) out lo ACTIVE LOW
gpio-513 ( |rtl836x-sda ) in hi
gpio-518 ( |rtl836x-sck ) in lo
gpio-520 ( |lime:usb ) out hi ACTIVE LOW
gpio-523 ( |reset ) in hi IRQ ACTIVE LOW
gpio-524 ( |wps ) in hi IRQ ACTIVE LOW
```
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21143
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
mdio node is optional for the rtl836x switch. Some devices use GPIO to
control the switch chip. Missing mdio is a normal behavior.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21143
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
If the switch is directly controlled by the mdio bus, we must ensure
that the mdio bus is ready instead of trying GPIO simulated bus.
Fixes: d4ac26ec49 ("kernel: rtl8366-smi: add Realtek switch management via mii-bus")
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21143
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add 08644db02d
to allow builds against the 6.18 series of kernels.
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/21190
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The ethernet driver gets all the data from the DTS now. No need
to access the shared soc_info structure any longer.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21183
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
family_id is now part of the register set and automatically assigned
during initialization. Make use of it. This is basically a conversion
from priv->family_id to priv->r->family_id.
While we are here convert some hard coded family ids to their proper
defines.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21183
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Now that the register configuration contains the family data derive it
from the DTS via device_get_match_data().
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21183
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The ethernet driver currently determines the family from the soc_info
structure. To avoid the dependency add the family to the local register
structure.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21183
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The ethernet driver uses registers in the switchcore range.
Rearrange the DTS nodes accordingly. This allows to make use
of regmap with syscon_node_to_regmap(np->parent) later.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21183
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The ethernet driver currently "requests" the memory region of the
ethernet device according to the DTS settings. This is wrong in
two ways:
- The DTS uses arbitrary regions out of the switchcore memory
- The variable is afterwards overwritten by DMA allocation
Drop it.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21183
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The Realtek Otto ethernet driver currently uses a single compatible
for all different models. Split this into the the four well known
subtargets. This allows to get rid of the central mach/soc include
later.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21183
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
With kernel 6.18 the package shared structure will be hidden from
the phy drivers. Workaround that in advance by providing a shared
private structure that covers all information that is needed for
normal operation.
For further simplification provide a new join() function that takes
care of a consistent initialization.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21204
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Remove unused pinctrl groups defined in the device tree, probably as a
result of importing the vendor device tree which is based on the
reference board from MediaTek's SDK.
114b5c2063 ("mediatek: filogic: Add support ASUS RT-AX57M")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
ASUS RT-AX57M, RT-AX54HP V2, RT-AX1800HP V2, RT-AX1800S V2, and RT-AX3000S all use the same firmware and have identical hardware
Hardware
--------
SOC: MediaTek MT7981b
RAM: 256MB DDR3L (Winbond W632GU6NB-09)
FLASH: 128MB SPI-NAND (Winbond W25N01KVZEIR)
WIFI: Mediatek MT7981b + Mediatek MT7976DAN 802.11ax 2.4/5 GHz
ETH: MediaTek MT7531AE Switch
UART: 3V3 115200 8N1 (Pinout silkscreened / Do not connect VCC)
MAC addresses
-------------
LAN Label MAC (stored in mtd ubi Factory partition at offset 0x4)
WAN LAN
2.4G LAN + 2 in first octet
5G LAN
Installation
-----------------------------------------------------------
Vendor-UI Method
-----------------------------------------------------------
1. Download the OpenWrt initramfs.trx image.
2. Connect the PC via LAN to one of the yellow router ports and wait
until your PC to get a DHCP lease.
3. Browse to http://192.168.1.1 (or whatever your router IP is configured as)
4. If your router is brand new, finish the setup process and log into
the Web-UI.
5. Navigate to Administration -> Firmware Upgrade and upload the
downloaded OpenWrt initramfs.trx image.
6. Wait for OpenWrt to boot. Open the default OpenWrt IP in a web browser and perform a system upgrade using the sysupgrade image as instructed in the top banner.
---------------------------------------------------------------------------
Revert to stock firmware:
1: Install package facinstall -> https://forum.openwrt.org/t/facinstall-package-for-easy-installation-factory-images/177587
2. Install Asus stock trx image via OpenWRT LuCI interface.
Signed-off-by: Garrett Mesmer <garrettmesm@gmail.com>
Co-authored-by: Oleg S <remittor@gmail.com>
Signed-off-by: Oleg S <remittor@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20491
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add a new recipe 'rt-loader-no-uimage' that passes the kernel load
address to rt-loader, causing it to use that instead of it's initial run
address.
The usual behavior is fine for uImages where the load address is
predefined in the header, U-boot loads the image to that address and
then runs it, rt-loader just takes over that address. For non-uImage
instead, the address is tightly coupled to where the image has been
transferred during serial or TFTP upload. This may not be possible on
several devices. Passing a separate kernel load address to rt-loader
decouples that and avoids taking the pain to change the load address of
the kernel itself.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21248
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
rt-loader currently has two operation modes, piggy-backed and
standalone. In standalone mode, the kernel load address is read from the
uImage in flash. In piggy-backed mode, rt-loader instead uses its
initial run address (aka run address during first run) as the kernel
load address. This is safe and works fine for all devices either using
U-boot or having no issue uploading an image to the default kernel load
address 0x80100000.
To extend usecases, allow to specify a kernel load address when
building rt-loader. In this case, rt-loader uses this address instead of
the address inferred at runtime.
On certain Zyxel devices, this allows to upload and boot an rt-loader
piggy-backed image to an alternate address but keep the default kernel
load address of 0x80100000. BootExt on these devices occupies memory
above and will crash during transfer when this address is used as upload
location. Using this extension, the image can be uploaded to e.g.
0x80300000 and rt-loader will use 0x80100000 as the final load address.
This avoid taking the pain the adjust the load address of the kernel
itself.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21248
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
After merge of https://github.com/openwrt/openwrt/pull/20709 I noticed,
that https://mirror-03.infra.openwrt.org/snapshots/targets/ath79/tiny/
still does not contain the build for RE450.
I analyzed the problem and noticed, that only builds which fits into
original size can be build and if the image is larger, it fails with
the following error: "WARNING: Image file .../openwrt/build_dir/
target-mips_24kc_musl/linux-ath79_tiny/tmp/
openwrt-ath79-tiny-tplink_re450-v1-squashfs-sysupgrade.bin is too big:
> 7864320".
This error is quite misleading as the image is smaller than 7864320. The
reason for this error is that default tplink-safeloader has hardcoded
factory partition structure and fails to generate any file.
Rather then fixing tplink-safeloader I followed approach from commit
ebd5e5fb53 ("ramips: switched TP-Link RE305 v1 to new partition layout")
and switched away from "tplink-safeloader sysupgrade".
I did not include "IMAGES := sysupgrade.bin", because with tiny target it
is still possible to locally build even factory image.
Fixes commit e768731dc8 ("ath79: switch TP-Link RE355 v1, RE450 v1 and
RE450 v2 to mtd-concat").
Signed-off-by: Radek Dostál <rd@radekdostal.com>
Link: https://github.com/openwrt/openwrt/pull/21158
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The updated logic for the APK dependencies and provides is as follows:
- If ABI version is defined:
- package is named `package_name-ABI_version`
- package implicitly provides
`package_name-ABI_version=package_version`
this implies that only one version of a package per ABI can be
installed at the same time
- additionally provide `package_name` so multiple packages can be
looked up by its base name
- for each `provides`, provide `provide-ABI_version=package_version`
this implies that only one version of a provide can be installed at
the same time
- else if ABI version is _not_ defined
- package is named `package_name`
- package implicitly provides `package_name=package_version`
this implies that only one version of a package can be installed at
the same time
- if `alternatives` is defined
- for each `provides`, provide `provide`
this implies that multiple versions of a provide can be installed
at the same time
- else if `alternatives` is _not_ defined
- for each `provides`, provide `provide=package_version`
this implies that only one version of a provide can be installed
at the same time
Both cases a package can be looked up by its base name.
ABI version `alternatives`, `conffiles`, `conffiles_static`, `list` and
`rusers` files so multiple versions of the same ABI package can be
installed side by side, and so they don't overwrite each other's
packaging files.
ABI version `EXTRA_DEPENDS` so dependencies can be correctly looked up
using the existing OpenWrt semantics without the ABI specified. This is
needed since ABI-versioned libraries no longer provide
`package_name=package_version`, so that they can be installed side by
side.
Remove duplicate dependencies when `EXTRA_DEPENDS` specifies a versioned
one that is already in `DEPENDS`.
ABI is defined
------------------------------------------------------------------------
`libsqlite3` has `PROVIDES` set to `libfake` and has two different ABI
versions installed. `libfake` is just an example to demonstrate the
mechanics, as the library can already be depended upon using e.g.
`libsqlite3-0=3.51.0-r1`. Note the ABI-versioned lists.
```
root@OpenWrt:/tmp# apk add --allow-untrusted ./libsqlite3-0-3.51.0-r1.apk
(1/1) Installing libsqlite3-0 (3.51.0-r1)
libsqlite3-0-3.51.0-r1.post-install: Executing script...
OK: 22 MiB in 157 packages
root@OpenWrt:/tmp# apk add --allow-untrusted ./libsqlite3-1-4.00.0-r1.apk
(1/1) Installing libsqlite3-1 (4.00.0-r1)
libsqlite3-1-4.00.0-r1.post-install: Executing script...
OK: 23 MiB in 158 packages
root@OpenWrt:/tmp# apk query --fields name,version,contents,provides libsqlite3-0 libsqlite3-1
Name: libsqlite3-0
Version: 3.51.0-r2
Provides: libfake-0=3.51.0-r2 libsqlite3
Contents:
lib/apk/packages/libsqlite3-0.list
usr/lib/libsqlite3.so.0
usr/lib/libsqlite3.so.3.51.0
Name: libsqlite3-1
Version: 4.00.0-r1
Provides: libfake-1=4.00.0-r1 libsqlite3
Contents:
lib/apk/packages/libsqlite3-1.list
usr/lib/libsqlite3.so.1
usr/lib/libsqlite3.so.4.00.0
root@OpenWrt:/tmp# ls -lh /usr/lib/libsqlite3.so.*
lrwxrwxrwx 1 root root 20 Nov 20 00:23 /usr/lib/libsqlite3.so.0 -> libsqlite3.so.3.51.0
lrwxrwxrwx 1 root root 20 Nov 20 00:27 /usr/lib/libsqlite3.so.1 -> libsqlite3.so.4.00.0
-rwxr-xr-x 1 root root 1.0M Nov 6 18:19 /usr/lib/libsqlite3.so.3.51.0
-rwxr-xr-x 1 root root 1.0M Nov 6 18:19 /usr/lib/libsqlite3.so.4.00.0
```
ABI is not defined
------------------------------------------------------------------------
Both `avahi-dbus-daemon` and `avahi-nodbus-daemon` provide `avahi-daemon`,
but have no ABI specified. This results in `avahi-daemon=0.8-r11` provides
for both packages and only one being able to be installed at the same time:
```
root@OpenWrt:/tmp# apk add --allow-untrusted ./avahi-nodbus-daemon-0.8-r11.apk
(1/4) Installing libavahi-nodbus-support (0.8-r10)
libavahi-nodbus-support-0.8-r10.post-install: Executing script...
(2/4) Installing libdaemon (0.14-r5)
libdaemon-0.14-r5.post-install: Executing script...
(3/4) Installing libexpat (2.7.3-r1)
libexpat-2.7.3-r1.post-install: Executing script...
(4/4) Installing avahi-nodbus-daemon (0.8-r11)
avahi-nodbus-daemon-0.8-r11.post-install: Executing script...
23 MiB in 160 packages
root@OpenWrt:/tmp# apk query --fields provides avahi-nodbus-daemon
Provides: avahi-daemon=0.8-r11
root@OpenWrt:/tmp# apk add --allow-untrusted ./avahi-dbus-daemon-0.8-r11.apk
ERROR: unable to select packages:
avahi-dbus-daemon-0.8-r11:
conflicts: avahi-nodbus-daemon-0.8-r11[avahi-daemon=0.8-r11]
satisfies: world[avahi-dbus-daemon><Q1R111s+ke9Vf+eCxDHX2BZVUK54Q=]
avahi-nodbus-daemon-0.8-r11:
conflicts: avahi-dbus-daemon-0.8-r11[avahi-daemon=0.8-r11]
satisfies: world[avahi-nodbus-daemon><Q1BAu7nLI2MgRabpveLTGO2ksQz7E=]
```
Provides and alternatives
------------------------------------------------------------------------
Both `uclient-fetch` and `wget-nossl` provide `wget` and specify
alternatives, so provides are not versioned and both packages can be
installed at the same time:
```
root@OpenWrt:/tmp# apk query --fields name,version,contents,provides uclient-fetch wget-nossl
Name: uclient-fetch
Version: 2025.10.03~dc909ca7-r1
Provides: wget
Contents:
bin/uclient-fetch
lib/apk/packages/uclient-fetch.alternatives
lib/apk/packages/uclient-fetch.list
Name: wget-nossl
Version: 1.25.0-r1
Provides: gnu-wget wget
Contents:
lib/apk/packages/wget-nossl.alternatives
lib/apk/packages/wget-nossl.list
usr/libexec/wget-nossl
```
Fixes: https://github.com/openwrt/openwrt/issues/20582
Fixes: https://github.com/openwrt/openwrt/issues/20802
Signed-off-by: George Sapkin <george@sapk.in>
Link: https://github.com/openwrt/openwrt/pull/20819
Signed-off-by: Robert Marko <robimarko@gmail.com>
Popular cheap PWM fans for this machine, like the ones coming in
heatsink+fan combos will not work properly at the currently defined
medium speed. Trying different pwm setting using a command
echo $value > /sys/devices/platform/pwm-fan/hwmon/hwmon1/pwm1
I found:
pwm1 value fan rotation speed cpu temperature notes
-----------------------------------------------------------------
0 maximal 31.5 Celsius too noisy
40 optimal 35.2 Celsius no noise hearable
95 minimal
above 95 does not rotate 55.5 Celsius
-----------------------------------------------------------------
Current cooling levels are:
cooling-levels = <255 96 0>;
Thus only cpu-active-high and cpu-active-low modes are usable.
This patch fixes cpu-active-medium settings for bpi-r3 board.
This patch may not be enough. Users may wants to tweak their thermal_zone0
trip points, thus tuning fan rotation speed depending on cpu temperature.
That can be done on the base of the following example:
=== example =========
# cpu temperature below 25 Celsius degrees, no rotation
echo 25000 > /sys/class/thermal/thermal_zone0/trip_point_4_temp
# cpu temperature in [25..32] Celsius degrees, normal rotation speed
echo 32000 > /sys/class/thermal/thermal_zone0/trip_point_3_temp
# cpu temperature above 50 Celsius degrees, max rotation speed
echo 50000 > /sys/class/thermal/thermal_zone0/trip_point_2_temp
=====================
Changes v2:
* put patch to a proper directory
* updated patch description
* tested with latest openwrt based on linux-6.6
Changes v3:
* use upstream linux patch
* update patch description
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17130
Signed-off-by: Robert Marko <robimarko@gmail.com>
Switch to NO_HZ_IDLE for energy saving. Also enable Menu cpuidle
governor for tickless systems.
Run-tested: Linksys WRT1900AC v2
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21136
Signed-off-by: Robert Marko <robimarko@gmail.com>
Usually we do not use MHz to describe the DDR transmission rate. In
fact, the clock frequency of the DDR3-1866 is only 933 MHz. MT/s is
a more commonly used unit.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Add menuconfig option 'kmod-usb-gadget-fs' for the USB FunctionFS gadget
module
OpenWRT is perfect for USB gadgets that are network-enabled, since it
provides everything needed to easily manage the device. Having support
for the FunctionFS gadget enables the use of any custom USB devices
that does not have a specific module, like Media Transfer Protocol.
Signed-off-by: Dominic Germain <dominic@germain.cc>
Link: https://github.com/openwrt/openwrt/pull/21207
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The ncm proto handler ignored ip4table, ip6table, and mtu settings.
The fix is based on the existing code in the mbim proto handler.
Fixes: #20216.
Signed-off-by: Alexander Patrakov <patrakov@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20217
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The build system allows to use Linux release candidate kernels (-rcX).
For this a target/linux/generic/kernel-6.XY as follows is needed:
LINUX_VERSION-6.XY = -rc1
LINUX_KERNEL_HASH-6.XY-rc1 = 18ba6ebd72f46b881e0d73e390b2888b7b43...
Sadly the builds fail with a packaging error.
fakeroot /home/openwrt/openwrt/openwrt/staging_dir/host/bin/apk
mkpkg --info "name:kernel" --info "version:6.15-rc1~c4bf...1f6-r1"
ERROR: info field 'version' has invalid value: package version is invalid
The apk metadata specification reads:
"... Currently the APK version specification is as follows:
number{.number}...{letter}{_suffix{number}}...{~hash}{-r#} ...
Optionally one or more _suffix{number} components can follow.
The list of valid suffixes (and their sorting order) is: alpha,
beta, pre, rc, <no suffix>, cvs, svn, git, hg, p."
Given that the kernel uses "-rcX" naming scheme and apk requires
"_rcX" instead, simply translate the dash to an underscore for
these builds.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21214
Signed-off-by: Robert Marko <robimarko@gmail.com>
Broadcom BCM43602 needs certain NVRAM variables to be set to function. Add
a quirk for it and add ASUS RT-AC3200 which has got Broadcom BCM43602 to
the quirk. Thanks to Tom Brautaset for finding the needed variables.
Signed-off-by: Chester A. Unal <chester.a.unal@arinc9.com>
Add ASUS RT-AC3200 and ASUS RT-AC5300 to the set wireless LED behaviour
quirk. ASUS RT-AC3200's wireless chip is different than ASUS RT-AC5300's,
the environment variables for it are 0:ledbh10 and 1:ledbh10.
Signed-off-by: Chester A. Unal <chester.a.unal@arinc9.com>
ASUS RT-AC3200 and ASUS RT-AC5300 are AC3200 and AC5300 routers,
respectively, featuring 5 Ethernet ports over the integrated Broadcom
switch.
ASUS RT-AC3200 hardware info:
* Processor: Broadcom BCM4709A0 dual-core @ 1.0 GHz
* Switch: BCM53012 in BCM4709A0
* DDR3 RAM: 256 MB
* Flash: 128 MB
* 2.4GHz: BCM43602 3x3 single chip 802.11b/g/n SoC
* 5GHz: BCM43602 3x3 two chips 802.11a/n/ac SoC
* Ports: 4 LAN Ports, 1 WAN Port
ASUS RT-AC5300 hardware info:
* Processor: Broadcom BCM4709C0 dual-core @ 1.4 GHz
* Switch: BCM53012 in BCM4709C0
* DDR3 RAM: 512 MB
* Flash: 128 MB
* 2.4GHz: BCM4366 4x4 single chip 802.11b/g/n SoC
* 5GHz: BCM4366 4x4 two chips 802.11a/n/ac SoC
* Ports: 4 LAN Ports, 1 WAN Port
Flashing instructions:
* Boot to CFE Recovery Mode by holding the reset button while power-on.
* Connect to the router with an ethernet cable.
* Set IPv4 address of the computer to 192.168.1.2 subnet 255.255.255.0.
* Head to http://192.168.1.1.
* Reset NVRAM.
* Upload the OpenWrt image.
CFE bootloader may reject flashing the image due to image integrity check.
In that case, follow the instructions below.
* Rename the OpenWrt image as firmware.trx.
* Run a TFTP server and make it serve the firmware.trx file.
* Run the URL below on a browser or curl.
http://192.168.1.1/do.htm?cmd=flash+-noheader+192.168.1.2:firmware.trx+flash0.trx
Signed-off-by: Chester A. Unal <chester.a.unal@arinc9.com>
- Security: Avoid privilege escalation via unix stream forwarding in Dropbear
server. Other programs on a system may authenticate unix sockets via
SO_PEERCRED, which would be root user for Dropbear forwarded connections,
allowing root privilege escalation.
Reported by Turistu, and thanks for advice on the fix.
This is tracked as CVE-2025-14282, and affects 2024.84 to 2025.88.
It is fixed by dropping privileges of the dropbear process after
authentication. Unix stream sockets are now disallowed when a
forced command is used, either with authorized_key restrictions or
"dropbear -c command".
In previous affected releases running with "dropbear -j" (will also disable
TCP fowarding) or building with localoptions.h/distrooptions.h
"#define DROPBEAR_SVR_LOCALSTREAMFWD 0" is a mitigation.
- Security: Include scp fix for CVE-2019-6111. This allowed
a malicious server to overwrite arbitrary local files.
The missing fix was reported by Ashish Kunwar.
- Server dropping privileges post-auth is enabled by default. This requires
setresgid() support, so some platforms such as netbsd or macos will have to
disable DROPBEAR_SVR_DROP_PRIVS in localoptions.h. Unix stream forwarding is
not available if DROPBEAR_SVR_DROP_PRIVS is disabled.
Remote server TCP socket forwarding will now use OS privileged port
restrictions rather than having a fixed "allow >=1024 for non-root" rule.
A future release may implement privilege dropping for netbsd/macos.
- Fix a regression in 2025.87 when RSA and DSS are not built. This would lead
to a crash at startup with bad_bufptr().
Reported by Dani Schmitt and Sebastian Priebe.
- Don't limit channel window to 500MB. That is could cause stuck connections
if peers advise a large window and don't send an increment within 500MB.
Affects SSH.NET https://github.com/sshnet/SSH.NET/issues/1671
Reported by Rob Hague.
- Ignore -g -s when passwords arent enabled. Patch from Norbert Lange.
Ignore -m (disable MOTD), -j/-k (tcp forwarding) when not enabled.
- Report SIGBUS and SIGTRAP signals. Patch from Loïc Mangeonjean.
- Fix incorrect server auth delay. Was meant to be 250-350ms, it was actually
150-350ms or possibly negative (zero). Reported by pickaxprograms.
- Fix building without public key options. Thanks to Konstantin Demin
- Fix building with proxycmd but without netcat. Thanks to Konstantin Demin
- Fix incorrect path documentation for distrooptions, thanks to Todd Zullinger
- Fix SO_REUSEADDR for TCP tests, reported by vt-alt.
Dropped:
* 050-dropbear-multihop-fix.patch as its included in the release 5cc0127000db5f
* 051-fix-pubkey-options.patch as its included in the release 1d4c4a542cd5df
* 052-fix-missing-depends-for-sntrup761x25519-sha512.patch as its included
in the release 1a2c1e649a1824
* 053-Don-t-limit-channel-window-to-500MB.patch as its included in the release a8610f7b98ad
Manually rebased:
* 110-change_user.patch
Fixes: CVE-2025-14282, CVE-2019-6111
Reviewed-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Konstantin Demin <rockdrilla@gmail.com>
Tested-by: Konstantin Demin <rockdrilla@gmail.com> [mediatek/filogic (GL.iNet GL-MT6000)]
Link: https://github.com/openwrt/openwrt/pull/21186
Signed-off-by: Petr Štetiar <ynezz@true.cz>
The u-boot target name has to match the u-boot configuration. Switch
this back to the old names.
Fixes: d871e95e7f ("sunxi: image: sync target profiles names with DT compatible")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This fixes a failed bring up of the radio on bootup
if the model defines a rename of phy in its /etc/board.json.
This specifically impacts Redmi AX6S and any router that does so
in its /etc/board.json. The fix fortunately is simple, just update
phy name in phys after rename.
The entry that specifically causes this issue is the following:
{
<omitted>
"wlan": {
"wl0": {
"path": "platform/18000000.wmac",
"info": {
"antenna_rx": 15,
"antenna_tx": 15,
"bands": {
"2G": {
"ht": true,
"max_width": 40,
"modes": [
"NOHT",
"HT20",
"HT40"
],
"default_channel": 1
}
},
"radios": [
]
}
},
...
}
The issue is that after rename, referenced phy in config is going to be
wl0 but in phys array it is still phy0; and so it fails to find phy
and does not bring up radio.
Fixes: https://github.com/openwrt/openwrt/issues/20250
Fixes: https://github.com/openwrt/openwrt/issues/20339
Signed-off-by: Rany Hany <rany_hany@riseup.net>
Link: https://github.com/openwrt/openwrt/pull/21175
Signed-off-by: Robert Marko <robimarko@gmail.com>
