Specifications:
SoC: Qualcomm IPQ6010 1.8GHz
RAM: K4A4G165WF-BCTD x2 1GiB
Flash: FORESEE 128GB/256GB eMMC
ETH: 4x 1Gbps + 1x 2.5Gbps
WLAN1: QCN5022 2.4GHz AX 2x2
WLAN2: QCN5052 5.8GHz AX 2x2
WLAN2: QCN9024 5.2GHz AX 4x4
Button: Reset, Screen, Wps
Power: DC 12V 3A
USB: 1x 3.0
Flash instructions:
1. Download the initramfs image, rename it to
initramfs.itb, host it with the tftp server.
2. If the stock firmware version is 4.3.0.r4211
or higher, enter "jdmt018R" to interrupt
U-Boot when the following statement appears:
"disabled console and autoboot in 2 seconds"
3. Run these commands in U-Boot console:
tftpboot initramfs.itb
bootm
4. After openwrt boots up, use scp or luci web
to upload sysupgrade.bin to upgrade.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/19840
Signed-off-by: Robert Marko <robimarko@gmail.com>
Specifications:
SoC: Qualcomm IPQ6000 1.2GHz
RAM: NT52CB256MB16DP 512MiB
Flash: FORESEE 64GB/128GB eMMC
ETH: QCA8075 (3x LAN, 1x WAN)
WLAN1: QCN5022 2.4GHz AX 2x2
WLAN2: QCN5052 5GHz AX 2x2
Power: DC 12V 2A
Button: Reset, Wps
USB: 1x 3.0
Flash instructions:
1. Download the initramfs image, rename it to
initramfs.itb, host it with the tftp server.
2. If the stock firmware version is 4.3.0.r4211
or higher, enter "jdmt018R" to interrupt
U-Boot when the following statement appears:
"disabled console and autoboot in 2 seconds"
3. Run these commands in U-Boot console:
tftpboot initramfs.itb
bootm
4. After openwrt boots up, use scp or luci web
to upload sysupgrade.bin to upgrade.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/19780
Signed-off-by: Robert Marko <robimarko@gmail.com>
The code to be replaced is a glorious no-op. A default value for
config.radius_das_client does not need to be assigned. This parameter
already has non-empty value: see the enclosing 'if' block.
As a result, the value of config.radius_das_client never gets modified
to contain both dae_client and dae_secret. This breaks hostapd.add_iface()
that expects config.radius_das_client to contain both dae_client and
dae_secret separated by a whitespace.
Fixes: #21519
Signed-off-by: Val Kulkov <val.kulkov@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21522
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Commit 9151c7015e introduced support for the global DHCP DUID to
generate a RFC4361-style client identifier.
However, the IAID introduced in those changes is based on ifindex, which
is subject to changes and causes issues on environments requiring a stable
IAID.
This commit switches the IAID to a stable one based on MD5.
Fixes: 9151c7015e ("netifd: use the global DHCP DUID for DHCPv4")
Link: https://github.com/openwrt/openwrt/pull/21489
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Add new function "network_generate_iface_iaid()" to generate a stable IAID
from an interface name.
Link: https://github.com/openwrt/openwrt/pull/21489
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
This driver supports the ADT7470 thermal monitoring chip, which is used
in the ECS4100-12PH switch.
Fixes: fa9f925951 ("realtek/rtl839x: Edgecore ECS4100-12PH support")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Link: https://github.com/openwrt/openwrt/pull/21505
Signed-off-by: Robert Marko <robimarko@gmail.com>
The Motorcomm YT8821 2.5G PHY is being used in some devices as an
alternative to devices like the RTL8221B. Package it as a kmod
so it can be used as a device package rather than requiring changes
to the target kernel config.
Signed-off-by: Andrew MacIntyre <andymac@pcug.org.au>
Link: https://github.com/openwrt/openwrt/pull/21399
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Microchip ATF depends on Ruby scripts to generate the FWU monitor HTML
and more, so make sure that host Ruby is available.
We also need to call the scripts directly via Ruby executable as shebang
wont work due to lack of Ruby in the Buildbot container.
Fixes: 5205c0c426 ("microchipsw: lan969x: add Microchip EV23X71A")
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
LibreSSL 3.9+ has dropped support for X509V3 extension API so cert_create
tool does not compile against it at all.
This was hidden by the fact that it was compiling against OpenSSL on my
host which still has that API, however we do not ship libssl-dev in the
Buildbot containers so compiling against distro OpenSSL is not possible.
So, after a long time trying to find any docs on that API I resorted to
LLM(Gemini 3 Pro) to get it to compile.
Our libcrypto is linked against pthread so we must pass -lpthread as well
for cert_tool.
Fixes: 5205c0c426 ("microchipsw: lan969x: add Microchip EV23X71A")
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
ABI version is added to a package name during packaging, so there's no
need to specify it manually. And nothing explicitly depends on libelf1.
Fixes: d7bf089 ("elfutils: rename libelf1 to libelf")
Signed-off-by: George Sapkin <george@sapk.in>
Link: https://github.com/openwrt/openwrt/pull/21369
Signed-off-by: Robert Marko <robimarko@gmail.com>
Packages shouldn't provide a package that another package, in this case
wget from packages provides. Explicitly provide a virtual @wget-any
instead to match the implicit wget provide and switch the only consumer
to use the new provider.
Set uclient-fetch as the default variant for wget-any.
Signed-off-by: George Sapkin <george@sapk.in>
Link: https://github.com/openwrt/openwrt/pull/21369
Signed-off-by: Robert Marko <robimarko@gmail.com>
Mark T4240RDB u-boot variants as device-built and avoid installing them into rootfs.
Without this buildbot crashes during package install with:
ERROR: unable to select packages:
u-boot-fsl_T4240RDB-nor (no such package):
required by: world[u-boot-fsl_T4240RDB-nor]
u-boot-fsl_T4240RDB-sdboot (no such package):
required by: world[u-boot-fsl_T4240RDB-sdboot]
Fixes: c5d3d5fe28 ("package: u-boot: initial support for qoriq arch")
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21514
Signed-off-by: Robert Marko <robimarko@gmail.com>
It is a BSS-level option and not radio-level. As such,
move it to wifi-iface and ap.uc.
Signed-off-by: Rany Hany <rany_hany@riseup.net>
Link: https://github.com/openwrt/openwrt/pull/21412
Signed-off-by: Robert Marko <robimarko@gmail.com>
Introduce the kmod-pmbus-sensors package to provide the
generic PMBus hwmon driver (CONFIG_SENSORS_PMBUS).
This enables support for a wide range of PMBus-based devices
including ADP4000, BMR310, BMR480, MAX20796, TPS544B25, and others.
Signed-off-by: Til Kaiser <mail@tk154.de>
Link: https://github.com/openwrt/openwrt/pull/21444
Signed-off-by: Robert Marko <robimarko@gmail.com>
Ensure -fPIC is passed during the linking stage to fix LTO build
failures (relocation errors) on MIPS and other architectures.
Fixes: #20436
Signed-off-by: Anari Jalakas <anari.jalakas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21455
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
They are being default enabled unconditionally when they should
depend on 802.11k. 802.11k should not be enabled by default
either as it can cause issues with certain older drivers and
is useless without a userspace program like usteer or DAWN.
If users want to enable 802.11k they will enable it when they
set such programs up.
Another inconsistency with rnr was dealt with so that it is not
default enabled. This is also not done with old wifi-scripts
and is generally unexpected and surprising behavior.
Moreoever, this introduces an inconsistency between old shell
wifi-scripts and ucode version. Old wifi-scripts does not do this.
Signed-off-by: Rany Hany <rany_hany@riseup.net>
Link: https://github.com/openwrt/openwrt/pull/21425
Signed-off-by: Robert Marko <robimarko@gmail.com>
Currently, kmod-crypto-kpp is only implied for curve25519 and thus it
can get unselected and then building will fail due to missing kpp.ko.
Same issue happens with kmod-crypto-hash for poly1305.
So, lets drop the whole implies logic and make sure to always select
them as dependencies.
Fixes: #21386
Link: https://github.com/openwrt/openwrt/pull/21483
Signed-off-by: Robert Marko <robimarko@gmail.com>
Hardware specifications:
- CPU: Freescale/NXP P2020, dual-core PowerPC @ 1 GHz
- RAM: 1 GB DDR3
- Flash: 2 MB NOR, 512 MB NAND
- Networking: 7x Gigabit Ethernet ports (via two Marvell 88E6171
switches, each attached to a different MAC)
- USB: 2x USB 2.0 ports (front panel)
- mini-PCIe slot
- RTC: Ricoh RS5C372A
- 4 buttons (via external MCU)
- 3 LEDs (via external MCU)
- LCD display (via external MCU)
Installation procedure:
1. Obtain the original MAC address table from the stock bootlog, for
example:
setting device eth0 to 00:90:7f:00:00:01
setting device eth1 to 00:90:7f:00:00:02
setting device eth2 to 00:90:7f:00:00:03
setting device eth3 to 00:90:7f:00:00:04
setting device eth4 to 00:90:7f:00:00:05
setting device eth5 to 00:90:7f:00:00:06
setting device eth6 to 00:90:7f:00:00:07
2. Open the case and move jumper JP1 from 2-3 to 1-2 to enter FAILSAFE
mode.
3. Power on the device and interrupt the boot process to access the U-Boot
shell.
4. Program the MAC base address into the EEPROM (text after '#' is a
comment):
mac ports 3
mac 2 00:90:7f:00:00:01 # first MAC address from bootlog
mac save
5. Reset the device and enter the U-Boot console again.
6. Connect a TFTP server to port 6 and boot the initramfs image:
setenv ipaddr 192.168.1.3
setenv serverip 192.168.1.2
setenv loadaddr 1000000
tftpboot $loadaddr openwrt-mpc85xx-p2020-watchguard_xtm330-initramfs-kernel.bin
bootm $loadaddr
7. (Optional) Backup all MTD partitions if you want the ability to restore
stock firmware.
8. Perform a normal sysupgrade from the initramfs environment.
9. Power off the device and move jumper JP1 back to 2-3.
10. The device will now boot OpenWrt.
Known issues:
- LCD, buttons and LEDs are controlled by an external MCU; the protocol is
currently unknown.
- The internal connection between the two Marvell switches is unused by
OpenWrt.
- The stock firmware uses an empty U-Boot environment; saving variables
modifies the environment and prevents a normal boot. FAILSAFE U-Boot
remains functional.
- WatchGuard configuration is encrypted; DSA MAC addresses are stored in
this configuration.
- Failsafe Ethernet works on port1.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21020
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
When DHCP Option 60 is specified via sendopts (hex, decimal, or named
formats), udhcpc sends its default "udhcp <version>" string alongside
the custom value, which causes authentication failures with some ISPs.
This fix detects Option 60 in sendopts and automatically passes -V ""
to udhcpc to suppress the default version string while allowing
multiple user-defined vendor classes.
Supported formats:
- Hexadecimal: 0x3c
- Decimal: 60
- Named: vendor
Fixes: #21242
Signed-off-by: JINLIANG GU <ihipop@gmail.com>
https://github.com/openwrt/openwrt/pull/21450
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Novarq Tactical 1000 is a LAN9696 based switch.
Specifications:
* CPU: Microchip LAN9696 switch SoC
* DRAM: 2GB DDR4
* Storage:
* 32MB QSPI NOR
* 16GB eMMC
* Networking:
* 24 x 10/100/1000 RJ45 via LAN8804 Quad PHY-s over QSGMII
* 4 x 100/1000/2500/5000/10000 SFP+ ports
* 1 x 10/100/1000 management RJ45 via LAN8840 PHY over RGMII (U-Boot too)
* USB: 1 x USB2.0 Type-A
* Management via USB-C (MCP2200):
* UART @ 115200 baud (Default), 921600 possible
* GPIO-s for bootstrap and reset
* LED-s:
* 2 per networking port (Green and Yellow)
* Green status LED
* Soft reset GPIO
* Power: 12V DC barrel jack
* External PoE:
* Option for PoE add-on
* Temperature Sensors:
* TMP1075 onboard
* CPU temperature
* Microchip MCP79402 RTC with battery back-up
* Microchip ATECC608C secure peripheral
* CPU heatsink with PWM fan
* Onboard header for case fan
Installation instructions:
1. Connect to UART via the USB-C port
2. Connect the management port
3. Boot and interrupt U-Boot
4. TFTP the OpenWrt initramfs image and boot it
5. SCP the OpenWrt eMMC GPT image to a running OpenWrt initramfs to /tmp
openwrt-microchipsw-lan969x-novarq_tactical-1000-squashfs-emmc-gpt.img.gz
And decompress it via:
gzip -d /tmp/openwrt-microchipsw-lan969x-novarq_tactical-1000-squashfs-emmc-gpt.img.gz
6. Wipe eMMC with:
dd if=/dev/zero of=/dev/mmcblk0 bs=1M
7. Flash OpenWrt eMMC image with:
dd if=/tmp/openwrt-microchipsw-lan969x-novarq_tactical-1000-squashfs-emmc-gpt.img
of=/dev/mmcblk0
After a restart OpenWrt will boot, and then regular sysupgrade can be used
for upgrades.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Update microchipsw TF-A to the latest bugfix release that fixes
SHA checksum validation if large files are uploaded via the monitor mode.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
This package adds initial u-boot support for qoriq target.
U-boot for qoriq devices must be compiled with 32-bit compiler and
linked with 32-bit linker. It's part of mpc 85xx target. But qoriq
target is 64-bit. As workaround, mpc85xx binary toolchain is downloaded
only for this u-boot.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/10941
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Create a common dtsi for Bananapi BPi-R4 Lite and add missing
gpio-leds. This reduced code and fixed the following LED bug:
LED 'green:status' not found (err=-19)
Fixes: 3a71dd58 ("uboot-mediatek: add support for the BananaPi BPi-R4 Lite")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
BDF for EAP623-Outdoor HD v1 was renamed in the repo, but ipq-wifi
was not updated to reflect that, so do it now to fix broken wifi.
Fixes: #21432
Signed-off-by: Robert Marko <robimarko@gmail.com>
This is tri-band WiFi6E capable router. Also Zyxel Nebula managed so no real local GUI. To open device 4 screws must be located uder the label.
Four latches are on front and two on each side. Better start from ethernet port side where 3 small latches are easy to handle.
FCC shows It's identical to WSQ65 sold as Zyxel Multy M6E but that's nowhare to be found yet. WSQ65 is not covered by this PR
Speficiations:
* SoC: Qualcomm IPQ5018
* RAM: 1GB DDR3
* Flash: Winbond W25N02KWZEIR 256MB
* UART: PCB "J3" is located left from front LED strip
(VCC/TX/RX/ /GND) 3.3V 115200n8
* Wi-Fi1: IPQ5018 (2x2 2.4 Ghz 802.11b/g/n/ax)
* Wi-Fi2: QCN6102 (2x2:2 5 Ghz 802.11an/ac/ax)
* Wi-Fi3: QCN6122 (2x2:2 6 Ghz 802.11an/ac/ax)
* Ethernet: QCA8337 4xLAN 1Gbit / 1xWAN 1Gbit
* Buttons: WPS , Reset
* LEDs: 13 in total
RGB power, RGB wan, RGB status (cloud), RGB wifi, Green wps
* FCCID: I8803891
*Flash Instructions starts with getting root:
connect uart to J3 connector next to the front LEDs
go to failsafe when this shows up in log:
"Press the [f] key and hit [enter] to enter failsafe mode"
execute:
mount_root
passwd -d root
reboot
logon as root:
look for 'Please press Enter to activate this console.'
login is root password is empty
execute:
fw_setenv DebugFlag=0x1
fw_setenv bootdelay=0x2
passwd -d root
backup ubi partition "rootfs" into safe space
reboot
*OpenWrt installation
stop uboot and execute:
setenv ipaddr 192.168.1.1
setenv serverip 192.168.1.10
tftpboot *-factory.ubi
flash rootfs
reset
or:
tftpboot *-initramfs-uImage.itb
bootm
use sysupgrade as usual
*restore OEM from backup
stop uboot and execute:
setenv ipaddr 192.168.1.1
setenv serverip 192.168.1.10
tftpboot *-initramfs-uImage.itb
bootm
transfer rootfs.bin backup and execute:
ubiformat /dev/mtd16 -y -f /tmp/rootfs.bin
Signed-off-by: Robert Senderek <robert.senderek@10g.pl>
Link: https://github.com/openwrt/openwrt/pull/21042
Signed-off-by: Robert Marko <robimarko@gmail.com>
This helps for setups where the wifi interfaces are added dynamically
via procd data by avoiding automatically bringing up interfaces with
the default config. Internally, they are treated pretty much the same
by netifd.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Bump to the latest version used by other OpenWrt platforms so
we don't bitrot.
Tested on the D-Link DIR-890L.
Link: https://github.com/openwrt/openwrt/pull/21377
Signed-off-by: Linus Walleij <linusw@kernel.org>
libubus only completes pending requests when the socket receives EOF.
When explicitly disconnecting, we need to call ubus_flush_requests().
Signed-off-by: Felix Fietkau <nbd@nbd.name>
channel.disconnect() already closes the fd via ubus_shutdown(),
so calling socket.close() afterwards is redundant and causes EBADF.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add a 10-second timeout for outgoing auth requests to prevent
connections from getting stuck when the remote peer goes silent
after the hello handshake but before responding to auth.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The network may be deleted before the disconnect callback fires.
Check for null to avoid crash when accessing net.tx_channels.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Bump to 2025-11-04 snapshot.
Added 100-gcc15-fix.patch which drops __DATE__/__TIME__ usage and provides
a stable fallback ("unknown"). This fixes build failures with GCC 15 and
-Werror=date-time in kernel builds.
% git log --oneline 04923c5..adb2f72
adb2f72e6fb8 get rid of spurious ubsan complaint for nat46_instance_t pairs field
d5f88686a4a8 Add a test harness which boots the kernel under kvm with a custom init which runs the tests
b983bab221f0 nat46-core: Fix FIXMEs about ICMPv6 parameter pointers
1aca482d6917 Add support for ignoring traffic class or TOS translation at the same time
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/21284
[Removed "Replace printk with pr_* macros" patch]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Mesh mode interface creation fails when the freq parameter is empty or
undefined. Unlike adhoc mode which checks if freq exists before using it,
mesh mode blindly constructs the iw command with freq parameter, resulting
in invalid syntax like:
iw dev mesh0 mesh join ssid freq NOHT
This causes the mesh interface to be created without joining the mesh
network, leaving it in a DOWN state with no channel assigned.
Fix by adding freq validation check similar to adhoc mode.
Tested on two routers in parallel as mesh peers:
- Xiaomi AX3000T (MediaTek MT7981)
- OpenWrt One (MediaTek MT7981)
- OpenWrt 6.6.119, 802.11s mesh on 5GHz (Channel 36, HE80)
Signed-off-by: Valent Turkovic <valent@meshpointone.com>
Link: https://github.com/openwrt/openwrt/pull/21373
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This is adding SUN6I-CSI and OV5640 driver for AllWinner platform for NanoPi
Signed-off-by: Michel Promonet <michel.promonet@free.fr>
Link: https://github.com/openwrt/openwrt/pull/20085
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit add option to enable kTLS support, improving
performance by offloading TLS encryption and decryption to
kernel space.
- Reduced CPU usage by minimizing data copying between user space
and kernel space.
- Enables the use of the sendfile() system call with encrypted
sockets for zero-copy data transmission.
- Leverages hardware-accelerated NIC that support TLS offloading.
Signed-off-by: Tan Zien <nabsdh9@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21306
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
