Set KERNEL_TESTING_PATCHVER to allow testing Linux 6.12.
Signed-off-by: Zhu Yujie <libriunc@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20555
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Move back to .remove from .remove_new as kernel 6.12 unified the usage
of .remove and .remove_new (and .remove_new is expected to be dropped in
later version)
Signed-off-by: Zhu Yujie <libriunc@gmail.com>
[ improve commit description ]
Link: https://github.com/openwrt/openwrt/pull/20555
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Apply trivial fixes for 6.12 files:
- Make functions static
- Add lots of missing header in drivers
- Fix no newline at end of file error and other new line error
- Drop deprecated validate function for xgmac
- Use devm for stmmac probe
- Remove host_ prefix from pcie_host_ops
Tested-by: Jingkun Zheng <mx@kevinmx.top>
Tested-by: Zhu Yujie <libriunc@gmail.com>
Tested-by: Chuanhong Guo gch981213@gmail.com
Signed-off-by: Zhu Yujie <libriunc@gmail.com>
[ improve commit description ]
Link: https://github.com/openwrt/openwrt/pull/20555
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Refresh kernel configuration of the sf21 subtarget for use with Linux 6.12.
Signed-off-by: Zhu Yujie <libriunc@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20555
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This change replaces the term 'master' with 'controller' in the
Siflower SPI driver (sf_qspi) to align with the Linux kernel's
inclusive language policy.
Tested-by: Jingkun Zheng <mx@kevinmx.top>
Tested-by: Zhu Yujie <libriunc@gmail.com>
Tested-by: Chuanhong Guo gch981213@gmail.com
Signed-off-by: Zhu Yujie <libriunc@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20555
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This involves rebasing the patches and resolving any conflicts
arising from changes in the base kernel between the previous
supported version and 6.12.
Tested-by: Jingkun Zheng <mx@kevinmx.top>
Tested-by: Zhu Yujie <libriunc@gmail.com>
Tested-by: Chuanhong Guo gch981213@gmail.com
Signed-off-by: Zhu Yujie <libriunc@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20555
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Drop patches from the 6.12 patchset that have been merged into the
mainline Linux kernel since the previous version.
Dropped patches:
001-net-phy-c45-add-genphy_c45_pma_read_ext_abilities-fu.patch
002-net-phy-Optimize-phy-speed-mask-to-be-compatible-to-.patch
003-net-phy-Add-driver-for-Motorcomm-yt8821-2.5G-etherne.patch
014-riscv-add-an-option-for-efficient-unaligned-access.patch
Signed-off-by: Zhu Yujie <libriunc@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20555
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This is an automatically generated commit.
When doing `git bisect`, consider `git bisect --skip`.
Signed-off-by: Zhu Yujie <libriunc@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20555
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Most users on forums face a broken 802.11r setup when having
a very simple 802.11r config (i.e., just ieee80211r enabled).
In most cases, simply bumping reassociation_deadline to
20000 fixes their problems and allows 802.11r to just work.
Reassociation Deadline is already set to 20 seconds on Cisco
equipment by default[1] which is why this value has been
chosen.
It is also mentioned on the OpenWRT Wiki as a value that should
be changed in order for 802.11r to work on Apple devices. I think
it would be better to change the defaults instead so users don't
have to do much work for a working setup.
[1]: https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/80211r-ft/b-80211r-dg.html
Fixes: https://github.com/openwrt/openwrt/issues/7907
Signed-off-by: Rany Hany <rany_hany@riseup.net>
Link: https://github.com/openwrt/openwrt/pull/20799
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This is useful to alter the default ban time after an STA
association is rejected for being below RSSI threshold.
Signed-off-by: Rany Hany <rany_hany@riseup.net>
Link: https://github.com/openwrt/openwrt/pull/20811
Signed-off-by: Robert Marko <robimarko@gmail.com>
APK will generate the compressed scripts.tar by default, however we rely
on using TAR support for updating the tarball on the fly and this does not
work when tarball is compressed and will cause the following errors:
staging_dir/host/bin/tar: Cannot update compressed archives
Try /staging_dir/host/bin/tar --help' or
staging_dir/host/bin/tar --usage' for more information.
So, lets simply decompress the scripts.tar.gz before usage and then
compress it after we are done.
Fixes: 5d85657f6d ("apk-tools: implement compression of on-device scripts.tar")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Airoha AN7581 SoC supports a Network Processor (NPU) to offload WiFi
traffic. Add the required bits to enable the support of it in the MT76
driver. This will be enabled by default if we are compiling for the
Airoha AN7581 SoC.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
[ improve commit title/description ]
Link: https://github.com/openwrt/openwrt/pull/20826
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Switch to .remove_new for downstream driver that still use the old
.remove to reduce patch delta for 6.12 bump.
Suggested-by: Zhu Yujie <libriunc@gmail.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This adds the -Wl,-z,pack-relative-relocs linking options.
This reduces the size of some binaries.
This is only supported on i386, x86_64, aarch64 and loongarch64 in
binutils. This feature is not support for MIPS.
musl libc supports it since version 1.2.4 .
glibc supports it since vesion 2.36.
binutils ld supports it since version 2.38 for x86 and since version
2.43 for LoongArch.
This reduces the size of the armsr default root file system from
5,262,198 bytes to 5,200,950 bytes by 61,248 bytes.
Link: https://github.com/openwrt/openwrt/pull/20679
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The initramfs images beginning 24.10 do not boot on the AP3825i. The
space available for decompression preceeding the compressed image is not
enough, crashing the system.
To make existing installation instructions continue to work, link the
loader at an address following the loadaddress of the U-Boot image.
Signed-off-by: David Bauer <mail@david-bauer.net>
Teltonika RUTC50 has a 5G modem. Install uqmi by default to control the
modem with the default package set.
Signed-off-by: David Bauer <mail@david-bauer.net>
According to the TP-Link websites the Archer C50 v6 EU is the same model
as the Archer A5 v6 EU. Installation method is the same as the C50 v6, as
they are basically the same hardware.
The commit is based on e9ac1b1.
Signed-off-by: David Senoner <seda18@rolmail.net>
All kernel symbols are automatically refreshed by
`make kernel_oldconfig CONFIG_TARGET=target`.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Link: https://github.com/openwrt/openwrt/pull/18669
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
This is an automatically generated commit.
When doing `git bisect`, consider `git bisect --skip`.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Link: https://github.com/openwrt/openwrt/pull/18669
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Backport eMMC Command Queuing support for RK3576/RK3588.
As the RK3576 device-tree has been upstreamed with the 'supports-cqe;'
property set by default, the kernel already tried to use CQE, which
results in system hang during suspend. This fixes the issue.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/20780
Signed-off-by: Robert Marko <robimarko@gmail.com>
Default behavior for apk was to create an uncompressed scripts.tar
file. Due to the structure of tar files, with fixed block
size and null padding, this file becomes very large on OpenWrt
installations where there are typically two scripts per package.
This could cause the raw tar file to easily grow to over 500KB,
whereas the compressed file is generally around 20-30KB.
When stored in the /rom partition of a squashfs device, the file
is compressed and this is not an issue. But, as soon as you add
or delete a package, the scripts.tar file is fully expanded into
the /overlay partition and can cause issues on small-flash devices.
This issue was addressed in an upstream commit by detecting
whether the scripts.tar file is compressed (its name must be
exactly 'scripts.tar.gz'), and then retaining that compression by
reading/writing the file using a compressed stream.
This commit applies a cherrypicked patch for the upstream commit, and
compresses the scripts.tar during construction of the device rootfs.
Fixes: https://github.com/openwrt/openwrt/issues/17108
Link: 012cdcfdf9
Signed-off-by: Eric Fahlgren <ericfahlgren@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20795
Signed-off-by: Robert Marko <robimarko@gmail.com>
The values provides are correct if after the @ it would be the bus
number and then device number. But it's actually, device and then
function for pcie devices.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19425
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Fixes:
Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie"
Matches upstream commit: 86bc917d2ac117ec922dbf8ed92ca989bf333281
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19425
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Rework each affected mtdsplit driver to make use of -ENOENT error
instead of -ENODEV to handle new kernel that checks error from parser on
subpartitions.
The only acceptable error is -ENOENT that skip the parser. This follow
pattern used upstream and also by an mtdsplit parser, mtdsplit_bcm_wfi,
and also by a workaround currently implemented for mtdsplit_mstc_boot.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This reverts commit 627a0e7da0.
A better solution has been accepted upstream that doesn't hide all
unexpected error.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add new and remove obsolete symbols for Kernel 6.12 by running
make kernel_oldconfig.
Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
Link: https://github.com/openwrt/openwrt/pull/20167
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This is an automatically generated commit.
When doing `git bisect`, consider `git bisect --skip`.
Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
Link: https://github.com/openwrt/openwrt/pull/20167
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Backport a trivial patch that half restore original functionality of MTD
parser for subpartition by ignoring if the parser returns -ENOENT.
This fix parsing and booting of some brcm devices.
Link: https://github.com/openwrt/openwrt/pull/20822
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add new and remove obsolete symbols for Kernel 6.12 by running
make kernel_oldconfig.
Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
Link: https://github.com/openwrt/openwrt/pull/20166
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
