Remove incomplete SPI flash definitions from affected device tree files.
These fragments only defined address-cells and size-cells without any
actual flash configuration (partitions, compatible string, etc.).
After applying openwrt/openwrt#20942 ("kernel: of: fix bad cell count error
for SPI flash node"), the kernel properly handles SPI flash nodes without
requiring these incomplete definitions in device-specific DTS files.
This cleanup eliminates unnecessary code that was likely a workaround for
the previous kernel issue.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/22036
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 313d563664)
Ensure that the BSS start_disabled option is always cleared, so that
interfaces come up properly.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit b7cd16dba3)
Without initializing pwd_group, it's set to 0, which is reserved value.
When EAP-PWD is used in wpa_supplicant/eapol_test, next error is seen:
EAP-PWD: Server EAP-pwd-ID proposal: group=0 random=1 prf=1 prep=0
EAP-pwd: Unsupported or disabled proposal
Signed-off-by: Yaroslav Isakov <yaroslav.isakov@gmail.com>
(cherry picked from commit 9d78b2f53c)
Secondary BSSes inherit the alloc value which bypasses
NL80211_ATTR_VIF_RADIO_MASK in nl80211_create_iface() and causes the
kernel to default new interfaces to all radios.
The ucode bss_create fallback fails to correct this because
the interface is already UP.. the kernel rejects SET_INTERFACE with
-EBUSY.
Signed-off-by: Chad Monroe <chad@monroe.io>
(cherry picked from commit 50d3d287e4)
Forward the OpenWrt CPPFLAGS to the compile process. This fixes fortify
sources support.
Link: https://github.com/openwrt/openwrt/pull/22056
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit c3f2a09a25)
Add the OpenWrt CPPFLAGS to the CFLAGS. ebtables does not
support CPPFLAGS. This fixes fortify sources support.
Link: https://github.com/openwrt/openwrt/pull/22056
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 77d896725f)
Add the OpenWrt CPPFLAGS to the CFLAGS. arptables does not
support CPPFLAGS. This fixes fortify sources support.
Link: https://github.com/openwrt/openwrt/pull/22056
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 33b2c6f955)
Add the OpenWrt CPPFLAGS to the FLAGS. iwinfo does not support CPPFLAGS.
This fixes fortify sources support.
Link: https://github.com/openwrt/openwrt/pull/22056
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 379d5b8bc4)
Add the OpenWrt CPPFLAGS to the CFLAGS. zyxel-bootconfig does not
support CPPFLAGS. This fixes fortify sources support.
Link: https://github.com/openwrt/openwrt/pull/22056
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit b8ea5004f4)
Forward the OpenWrt CPPFLAGS to the compile process. This fixes fortify
sources support.
Link: https://github.com/openwrt/openwrt/pull/22056
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit ddb1c1ab33)
Add the OpenWrt CPPFLAGS to the CFLAGS. wireless-tools does not
support CPPFLAGS. This fixes fortify sources support.
Link: https://github.com/openwrt/openwrt/pull/22056
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit d69b283068)
Forward the OpenWrt CPPFLAGS to the compile process. This fixes fortify
sources support.
Link: https://github.com/openwrt/openwrt/pull/22056
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 0f1c1c581f)
Forward the OpenWrt CPPFLAGS to the compile process. This fixes fortify
sources support.
Link: https://github.com/openwrt/openwrt/pull/22056
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit bfd57eab3d)
Forward the OpenWrt CPPFLAGS to the compile process. This fixes fortify
sources support.
Allow to extend the CPPFLAGS and not only overwrite.
Link: https://github.com/openwrt/openwrt/pull/22056
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 53e6935960)
Add the OpenWrt CPPFLAGS to the CFLAGS. bzip2 does not support CPPFLAGS.
This fixes fortify sources support.
Link: https://github.com/openwrt/openwrt/pull/22056
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit cd1fda5c8b)
Forward the OpenWrt CPPFLAGS to the compile process. This fixes fortify
sources support.
Link: https://github.com/openwrt/openwrt/pull/22056
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit b497c3f68f)
Forward the OpenWrt CPPFLAGS to the compile process. This fixes fortify
sources support.
Link: https://github.com/openwrt/openwrt/pull/22056
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 2ca7c2b846)
Forward the OpenWrt CPPFLAGS to the compile process. This fixes fortify
sources support.
Link: https://github.com/openwrt/openwrt/pull/22056
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 39e5f11631)
Forward the OpenWrt CPPFLAGS to the compile process. This fixes fortify
sources support.
Link: https://github.com/openwrt/openwrt/pull/22056
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 35939e4db9)
Changelog: https://github.com/autotools-mirror/m4/blob/branch-1.4/NEWS
This update fixes a build error on my system:
./string.h:777:20: error: expected identifier or '(' before '_Generic'
777 | _GL_EXTERN_C void *memchr (const void *__s, int __c, size_t __n)
| ^~~~~~
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/21987
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit ce9a0ff3fb)
The target name of meraki_mx64-a0 in
target/linux/bcm53xx/image/Makefile used not to be consistent with the
one defined in target/linux/bcm53xx/base-files/lib/upgrade/platform.sh
and generates warning for "Image check failed" during sysupgrade.
This commit would also make the target name for meraki_mx64-a0 to
conform to the openwrt standard.
Signed-off-by: Edward Chow <equu@openmail.cc>
Link: https://github.com/openwrt/openwrt/pull/22034
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 625f01cd80)
The Linux kernel assumes that the u-boot environment covers the full
partition, but it only covers 0x1000 bytes. Linux checks the CRC and
does this over the full partition. This fails like this:
```
u-boot-env-layout 1f000000.spi:flash@0:partitions:partition@30000:nvmem-layout: Invalid calculated CRC32: 0xfcac8c41 (expected: 0x14e6335a)
u-boot-env-layout 1f000000.spi:flash@0:partitions:partition@30000:nvmem-layout: probe with driver u-boot-env-layout failed with error -22
```
Define the u-boot environment with a length of 0x1000 bytes to calculate
the CRC only over this area.
When replicating the u-boot environment with these parameters it
generates the same CRC:
```
mkenvimage -p 0 -b -s 0x1000 -o output.bin input.txt
```
Fixes: https://github.com/openwrt/openwrt/issues/21696
Fixes: 5e3a602def ("ath79: sitecom,wlrx100: use nvmem")
Link: https://github.com/openwrt/openwrt/pull/22030
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 68a466b698)
The TARGET_CPPFLAGS contain the include paths used by OpenWrt. This also
contains the including of the fortify sources headers. If they are not
provided, the applications will not use fortify sources headers when
compiled against musl. Add them to cmake builds too. cmake does not
support a special CPPFLGS option [0], just add them to CFLAGS and
CXXFLAGS like we also do it for meson and normal make.
This should fix fortify sources support for cmake builds.
I found this explanation for the flags:
* CFLAGS: C flags, passed during compile AND link
* CXXFLAGS: C++ flags, passed during compile AND link
* CPPFLAGS: pre-processor flags, passed ONLY during compile
* LDFLAGS: linker flags, passed ONLY during link
[0]: https://gitlab.kitware.com/cmake/cmake/-/issues/12928
Link: https://github.com/openwrt/openwrt/pull/22042
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 7bf8d568f6)
Some applications might activate -Werror=format-nonliteral when building
their application. This breaks fortify headers build. Tell GCC to ignore
such warnings for this code.
This fixes the libubox and ucode build:
```
/include/fortify/stdio.h: In function 'snprintf':
/include/fortify/stdio.h:101:9: error: format not a string literal, argument types not checked [-Werror=format-nonliteral]
101 | return __orig_snprintf(__s, __n, __f, __builtin_va_arg_pack());
| ^~~~~~
/include/fortify/stdio.h: In function 'sprintf':
/include/fortify/stdio.h:110:17: error: format not a string literal, argument types not checked [-Werror=format-nonliteral]
110 | __r = __orig_snprintf(__s, __b, __f, __builtin_va_arg_pack());
| ^~~
/include/fortify/stdio.h:114:17: error: format not a string literal, argument types not checked [-Werror=format-nonliteral]
114 | __r = __orig_sprintf(__s, __f, __builtin_va_arg_pack());
| ^~~
cc1: all warnings being treated as errors
ninja: build stopped: subcommand failed.
```
Link: https://github.com/openwrt/openwrt/pull/22042
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit b237266640)
If nvmem is used for ethernet mac address, we need to defer loading to
get the proper mac.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21955
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit fb71774232)
RIPE Atlas Probe v5 is a network measurement device based on Turris MOX.
u-boot bootscript supports booting both from the original Turris BTRFS
layout and default OpenWrt ext4 boot + root partition layout.
Specifications:
* SoC: Marvell ARMADA 3720
* RAM: 512 MiB, DDR3
* eMMC: 4G
* Ethernet: 1x 1GbE
MAC:
LAN MAC: label on board
Flash instructions:
* For using the default ext4 layout, boot into a live system using
tftpboot in u-boot and flash an OpenWrt SD image onto /dev/mmcblk0.
* For the Turris layout, put the new rootfs into subvolume '@', not
forgetting to add Image, device tree, and boot.scr to /boot.
Misc:
* USB connection is only for power. For UART access use the pin header:
1: GND
2: +1.8V
5: TX
6: RX
* Flashing the image onto Turris Shield won't work. Use Turris MOX image
instead.
Signed-off-by: Tomáš Macholda <tomas.macholda@nic.cz>
Link: https://github.com/openwrt/openwrt/pull/20031
(cherry picked from commit 0271f2ee36)
Signed-off-by: Trix Taiclet <git@trix.moe>
Link: https://github.com/openwrt/openwrt/pull/22048
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This fixes a simple logic error in the macaddr existence check in mac80211.uc.
Signed-off-by: Harin Lee <me@harin.net>
Link: https://github.com/openwrt/openwrt/pull/21277
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 2ebcda1ea6)
This allows services to dynamically configure MLO interfaces without
using UCI.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 0a8bccf85d)
This helps for setups where the wifi interfaces are added dynamically
via procd data by avoiding automatically bringing up interfaces with
the default config. Internally, they are treated pretty much the same
by netifd.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 79a0aebd81)
Add optional chaining when accessing device config in the wifi-iface
loop to handle cases where a referenced device doesn't exist.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 8b994ed397)
When storing device-level data, wdev_set_data() spread the entire wdev
object into handler_data. Since handler_config.data is set from the
previous handler_data[wdev.name] before each setup, this created
exponentially growing nesting with each reload, eventually causing
"nesting too deep" JSON parse errors.
Fix by initializing cur to a simple object containing only the device
name instead of the entire wdev object.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 68c2ab8f5f)
Extract survey fetching into get_survey() and store results in iface.survey,
allowing access to full survey info (not just noise) for later use.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit e855f32bdd)
Moved interface discovery and data population into an exported update()
function that can be called on-demand to refresh wireless interface
information. This allows using iwinfo.uc as a library inside daemons.
Signed-off-by: John Crispin <john@phrozen.org>
(cherry picked from commit 26eab84f81)
63413daa8760 uclient-http: fix HTTP authentication after deferred header processing
4fa6fae02f74 uclient-fetch: Extract opt_post variable
8df3120639a4 uclient-fetch: Use HEAD for --spider
0392dfc8e8c4 uclient-fetch: Support of --method, --body-data and --body-file
115c92824b6d uclient-fetch: add OPTIONS request type
a1531e89f6c2 uclient-fetch: support for WebDAV methods
Fixes: https://github.com/openwrt/uclient/issues/14
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 88f3c0eeb0)
b3ee1209a3d0 uclient-http: reset fd to -1 after close in disconnect
9c2ad269c42b uclient-http: fix seq field check to use correct field
80c9bd29c233 uclient-http: fix hang on HTTP to HTTPS redirect
931bbfeb2c92 ucode: fix memory leak when using ssl context
Fixes: https://github.com/openwrt/uclient/issues/11
Fixes: https://github.com/openwrt/uclient/issues/13
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 9d496dfb98)
d324c0503040 libubox: send warnings to stderr
5a65cb5a79b7 libubox: document positional arguments
8c7b489daa02 libubox: add anonymous strings, ints, et al in arrays
5ec7ff2effb3 uloop: use volatile sig_atomic_t for do_sigchld flag
0efa2cd3b74c usock: check SO_ERROR after poll in usock_inet_timeout()
1a73ded9f738 usock: fix timeout handling in usock_inet_timeout()
1aa36ee774c8 usock: implement RFC 8305 Happy Eyeballs for usock_inet_timeout()
Fixes: https://github.com/openwrt/uclient/issues/8
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 7bc8aa492f)
Check /var/run/uci/ before /etc/config/ so that overlay configs
also trigger service reload events.
The overlay directory takes precedence, and uci show already handles
merging overlay + base configuration correctly.
Signed-off-by: John Crispin <john@phrozen.org>
(cherry picked from commit aaa2d9f1e5)
When a remote peer's connection drops (device powered off, unetmsgd
crash, network failure), network_rx_cleanup_state silently removed
the remote publish/subscribe handles without notifying local
subscribers. This meant local clients had no way to detect that a
remote peer had disappeared.
Call handle_publish for each channel where a remote publish handle
is removed during connection cleanup, so local subscribers receive
the publisher change notification and can react accordingly.
Signed-off-by: John Crispin <john@phrozen.org>
(cherry picked from commit 7fd71f2c74)
handle_publish() notifies local subscribers about publisher state
changes. The publish/subscribe handler in network_socket_handle_request()
was calling it for both remote publish and subscribe changes, but
subscriber changes are not relevant to local subscribers.
Guard the handle_publish() calls with a msgtype == "publish" check,
matching the local client paths in unetmsgd-client.uc which already
have this guard.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit e0722d0ac4)
When both peers connect simultaneously, the RX side can authenticate
before the TX handshake completes. network_check_auth() was sending a
ping on the unauthenticated TX channel, which gets rejected by the
remote's pre-auth handler as "Auth failed", killing the connection and
triggering an endless reconnect cycle.
Check chan.auth before interacting with the TX channel. If TX auth
hasn't completed yet, just schedule a reconnect timer - auth_data_cb
already handles state sync when TX auth completes.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 212040b5ca)
network_close() only closed the listening socket without shutting down
established RX/TX connections. This left remote state in
core.remote_publish/core.remote_subscribe for hosts on the removed
network, causing stale entries in channel listings and failed routing
attempts.
Close all RX and TX channels before removing the network, which also
triggers remote state cleanup via network_rx_socket_close().
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 389a79d972)
The cleanup condition checked != instead of ==, inverting the logic.
This caused two problems:
When an authenticated RX connection disconnected, remote state for that
host was never cleaned up since the stored entry matched the one being
closed.
When a stale unauthenticated connection from a peer closed, any existing
authenticated connection from the same peer was incorrectly deleted and
its remote state wiped.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit f09596f84f)
When a remote peer's publish registrations arrive via RX before the
local TX connection is authenticated, handle_publish fires but the
subscriber can't reach the remote publisher yet since the TX channel
isn't ready.
Suppress publish notifications on the RX side when no authenticated TX
channel exists for the remote host. After TX authentication completes,
re-trigger handle_publish only for topics that the specific peer
publishes and that have local subscribers.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 3efcf444a1)
The condition checked !data.networks instead of !data.networks[name],
making it always false since data.networks was already validated earlier
in the function. Networks removed from unetd were never closed.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit a2368e0f69)
