Refresh the patches to make them apply cleanly again.
Fixes: 105eb9ca95 ("kernel: add cake-mq support")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 30ac12f4b4)
The problem is the following: we have three fixed partitions
in a RedBoot partition for kernel, initrd and rootfs. On the
surface this looks good.
But we have little flash and want to use it efficiently. We want
to use the OpenWrt "firmware" partition scheme where the kernel,
initramfs and sqashfs+jffs2 rootfs is appended, leaving maximum
space for a writeable rootfs.
To do this we will override the existing RedBoot partition table
with one that merges the three separate partitions into one
"firmware" partition.
RedBoot is still booting the system. It still needs to read the
first two parts "as if" these were the kernel and initrd. This
works fine, because the kernel still comes first.
We already have hacks in place to merge the two kernel and initrd
into one binary image and execute it. This is done by prepending
a "prolog" to the kernel that does the necessary copying in
memory and then jumps to execute the kernel.
Since this "prolog" copying routine is just 92 bytes but has 512
bytes allocated, we can trivially create a firmware format that
can be used for splitting the image into kernel and rootfs
using a tagging scheme that can be done directly by scripting
so we don't need any special binary programs.
This splitter implements that idea.
This will be used on the Gemini platform and was tested on the
Raidsonic IB-4220-B.
Link: https://github.com/openwrt/openwrt/pull/21820
(cherry picked from commit 5ac8f14ccb)
Link: https://github.com/openwrt/openwrt/pull/21973
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add the required patches in order to backport cake-mq from Linux 7.0.
Many thanks to Toke Høiland-Jørgensen for providing the git trees with backports
for both 6.12 and 6.18.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21964
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 105eb9ca95)
Bc-bocun Chen of MediaTek has discovered a memory leak in the error path
in our downstream patch for mtk_eth_soc which adds support for the 10G
PCS and PHY paths of the MT7988 SoC.
Fix this by freeing the at this point already allocated netdev resources
before returning the error.
Fixes: 4cb6bd9a6d ("mediatek: switch to pending XFI 10G Ethernet drivers")
Reported-by: Bc-bocun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 4d71c767c4)
Part of the phy patch process breaks functionality on non-Realtek
platforms. Only apply this on Realtek SoCs to fix functionality
everywhere else.
Signed-off-by: Andrew LaMarche <andrewjlamarche@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21777
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 268a0cb363)
Link: https://github.com/openwrt/openwrt/pull/21799
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This reverts commit 53a525f346.
Linux 6.12.67 broke ipip6 tunnel (DS-Lite) and MAP-E.
Revert this Linux kernel bump till the problem is fixed.
Fixes: https://github.com/openwrt/openwrt/issues/21737
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The CONFIG_SOFTLOCKUP_DETECTOR_INTR_STORM option shows up when the
OpenWrt option CONFIG_KERNEL_SOFTLOCKUP_DETECTOR is activated.
Link: https://github.com/openwrt/openwrt/pull/21710
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit bf9e90c94e)
This reverts commit 7390e63374.
This broke SFP handling on some Mediatek SoCs.
Some SFPs are configured for inband/2500base-x link mode and were
rejected with this change.
Fixes: https://github.com/openwrt/openwrt/issues/21436
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 8076376aca)
These patches fix bugs in a patch we backported.
These patch were cherry picked from upstream Linux because it references
a patch we backported in the fixes tag.
The patches were reordered to match the ordering in the upstream Linux kernel.
Fixes: 93173aee96 ("qualcommbe: ipq95xx: Add initial support for new target")
Link: https://github.com/openwrt/openwrt/pull/21366
(cherry picked from commit 5230157a16)
Link: https://github.com/openwrt/openwrt/pull/21390
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This patch fixes a bug in a patch we backported.
This patch was cherry picked from upstream Linux because it references a
patch we backported in the fixes tag.
The first two patches are providing function needed by the last patch.
Fixes: 813ecda1f3 ("generic: backport phylink patches for PCS/PHY caps OPs")
Link: https://github.com/openwrt/openwrt/pull/21366
(cherry picked from commit 69d76e3a14)
Link: https://github.com/openwrt/openwrt/pull/21390
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This patch fixes a bug in a patch we backported.
This patch was cherry picked from upstream Linux because it references a
patch we backported in the fixes tag.
The function phy_id_compare_vendor() is needed by the fix.
Refresh 782-05-v6.16-net-phy-Add-support-for-Aeonsemi-AS21xxx-PHYs.patch with the upstream code.
Fixes: 08a616b216 ("generic: backport support for Aeonsemi AS21xxx PHY")
Link: https://github.com/openwrt/openwrt/pull/21366
(cherry picked from commit b3318fe819)
Link: https://github.com/openwrt/openwrt/pull/21390
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
There are no platform_data based devices using it anymore. Also move
header files to the driver folder.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21138
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 852d17ed82)
Teaming is a link aggregation implementation similar to bonding, but
it's configured by a userspace program.
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21120
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 8b05db405b)
Add opending patch fixing resource_size(9 if resource start and end is
set to zero.
This is to indirectly fix a helper rework in ath11k qmi code that cause
firmware load panic.
Link: https://github.com/openwrt/openwrt/pull/20964
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Move reserved_mem backports patch from airoha to generic dir as it will
be also used by backports package based on 6.18.
Link: https://github.com/openwrt/openwrt/pull/20964
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Backport support for faux base driver needed for backports package to
compile with kernel 6.18.
Link: https://github.com/openwrt/openwrt/pull/20964
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Unneeded semicolon
WARNING comparing pointer to 0
WARNING: NULL check before some freeing functions is not needed.
WARNING: casting value returned by memory allocation function to (u32 *)
ERROR: allocation function on line 378 returns NULL not ERR_PTR on failure
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19932
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Backport fix for premature SPI CS deassertion on RX-only transactions from
linux v6.18, which is needed for bmips (bcm63xx).
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Backport support for the Quectel RG255C USB modem.
This modem is used, among others, on the Teltonika RUT976.
Signed-off-by: Til Kaiser <mail@tk154.de>
Link: https://github.com/openwrt/openwrt/pull/20933
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Since everything got migrated to the layouts driver, this is no longer
needed.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20948
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
