Create a common dtsi for Bananapi BPi-R4 Lite and add missing
gpio-leds. This reduced code and fixed the following LED bug:
LED 'green:status' not found (err=-19)
Fixes: 3a71dd58 ("uboot-mediatek: add support for the BananaPi BPi-R4 Lite")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
BDF for EAP623-Outdoor HD v1 was renamed in the repo, but ipq-wifi
was not updated to reflect that, so do it now to fix broken wifi.
Fixes: #21432
Signed-off-by: Robert Marko <robimarko@gmail.com>
This is tri-band WiFi6E capable router. Also Zyxel Nebula managed so no real local GUI. To open device 4 screws must be located uder the label.
Four latches are on front and two on each side. Better start from ethernet port side where 3 small latches are easy to handle.
FCC shows It's identical to WSQ65 sold as Zyxel Multy M6E but that's nowhare to be found yet. WSQ65 is not covered by this PR
Speficiations:
* SoC: Qualcomm IPQ5018
* RAM: 1GB DDR3
* Flash: Winbond W25N02KWZEIR 256MB
* UART: PCB "J3" is located left from front LED strip
(VCC/TX/RX/ /GND) 3.3V 115200n8
* Wi-Fi1: IPQ5018 (2x2 2.4 Ghz 802.11b/g/n/ax)
* Wi-Fi2: QCN6102 (2x2:2 5 Ghz 802.11an/ac/ax)
* Wi-Fi3: QCN6122 (2x2:2 6 Ghz 802.11an/ac/ax)
* Ethernet: QCA8337 4xLAN 1Gbit / 1xWAN 1Gbit
* Buttons: WPS , Reset
* LEDs: 13 in total
RGB power, RGB wan, RGB status (cloud), RGB wifi, Green wps
* FCCID: I8803891
*Flash Instructions starts with getting root:
connect uart to J3 connector next to the front LEDs
go to failsafe when this shows up in log:
"Press the [f] key and hit [enter] to enter failsafe mode"
execute:
mount_root
passwd -d root
reboot
logon as root:
look for 'Please press Enter to activate this console.'
login is root password is empty
execute:
fw_setenv DebugFlag=0x1
fw_setenv bootdelay=0x2
passwd -d root
backup ubi partition "rootfs" into safe space
reboot
*OpenWrt installation
stop uboot and execute:
setenv ipaddr 192.168.1.1
setenv serverip 192.168.1.10
tftpboot *-factory.ubi
flash rootfs
reset
or:
tftpboot *-initramfs-uImage.itb
bootm
use sysupgrade as usual
*restore OEM from backup
stop uboot and execute:
setenv ipaddr 192.168.1.1
setenv serverip 192.168.1.10
tftpboot *-initramfs-uImage.itb
bootm
transfer rootfs.bin backup and execute:
ubiformat /dev/mtd16 -y -f /tmp/rootfs.bin
Signed-off-by: Robert Senderek <robert.senderek@10g.pl>
Link: https://github.com/openwrt/openwrt/pull/21042
Signed-off-by: Robert Marko <robimarko@gmail.com>
This helps for setups where the wifi interfaces are added dynamically
via procd data by avoiding automatically bringing up interfaces with
the default config. Internally, they are treated pretty much the same
by netifd.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Bump to the latest version used by other OpenWrt platforms so
we don't bitrot.
Tested on the D-Link DIR-890L.
Link: https://github.com/openwrt/openwrt/pull/21377
Signed-off-by: Linus Walleij <linusw@kernel.org>
libubus only completes pending requests when the socket receives EOF.
When explicitly disconnecting, we need to call ubus_flush_requests().
Signed-off-by: Felix Fietkau <nbd@nbd.name>
channel.disconnect() already closes the fd via ubus_shutdown(),
so calling socket.close() afterwards is redundant and causes EBADF.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add a 10-second timeout for outgoing auth requests to prevent
connections from getting stuck when the remote peer goes silent
after the hello handshake but before responding to auth.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The network may be deleted before the disconnect callback fires.
Check for null to avoid crash when accessing net.tx_channels.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Bump to 2025-11-04 snapshot.
Added 100-gcc15-fix.patch which drops __DATE__/__TIME__ usage and provides
a stable fallback ("unknown"). This fixes build failures with GCC 15 and
-Werror=date-time in kernel builds.
% git log --oneline 04923c5..adb2f72
adb2f72e6fb8 get rid of spurious ubsan complaint for nat46_instance_t pairs field
d5f88686a4a8 Add a test harness which boots the kernel under kvm with a custom init which runs the tests
b983bab221f0 nat46-core: Fix FIXMEs about ICMPv6 parameter pointers
1aca482d6917 Add support for ignoring traffic class or TOS translation at the same time
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/21284
[Removed "Replace printk with pr_* macros" patch]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Mesh mode interface creation fails when the freq parameter is empty or
undefined. Unlike adhoc mode which checks if freq exists before using it,
mesh mode blindly constructs the iw command with freq parameter, resulting
in invalid syntax like:
iw dev mesh0 mesh join ssid freq NOHT
This causes the mesh interface to be created without joining the mesh
network, leaving it in a DOWN state with no channel assigned.
Fix by adding freq validation check similar to adhoc mode.
Tested on two routers in parallel as mesh peers:
- Xiaomi AX3000T (MediaTek MT7981)
- OpenWrt One (MediaTek MT7981)
- OpenWrt 6.6.119, 802.11s mesh on 5GHz (Channel 36, HE80)
Signed-off-by: Valent Turkovic <valent@meshpointone.com>
Link: https://github.com/openwrt/openwrt/pull/21373
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This is adding SUN6I-CSI and OV5640 driver for AllWinner platform for NanoPi
Signed-off-by: Michel Promonet <michel.promonet@free.fr>
Link: https://github.com/openwrt/openwrt/pull/20085
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit add option to enable kTLS support, improving
performance by offloading TLS encryption and decryption to
kernel space.
- Reduced CPU usage by minimizing data copying between user space
and kernel space.
- Enables the use of the sendfile() system call with encrypted
sockets for zero-copy data transmission.
- Leverages hardware-accelerated NIC that support TLS offloading.
Signed-off-by: Tan Zien <nabsdh9@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21306
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit adds a new non-ubi spim-nand build for mt7987.
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21235
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The for-in loop variable 'name' was shadowing the function parameter,
causing remote subscription cleanup to fail when hosts disconnect.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
It seems old website has been retired.
Signed-off-by: Yanase Yuki <dev@zpc.st>
Link: https://github.com/openwrt/openwrt/pull/21279
Signed-off-by: Robert Marko <robimarko@gmail.com>
It seems project URL has been changed.
Signed-off-by: Yanase Yuki <dev@zpc.st>
Link: https://github.com/openwrt/openwrt/pull/21279
Signed-off-by: Robert Marko <robimarko@gmail.com>
It seems project URL has been changed.
Signed-off-by: Yanase Yuki <dev@zpc.st>
Link: https://github.com/openwrt/openwrt/pull/21279
Signed-off-by: Robert Marko <robimarko@gmail.com>
Website has been moved to netfilter.org.
Signed-off-by: Yanase Yuki <dev@zpc.st>
Link: https://github.com/openwrt/openwrt/pull/21279
Signed-off-by: Robert Marko <robimarko@gmail.com>
It seems old website has been retired.
Signed-off-by: Yanase Yuki <dev@zpc.st>
Link: https://github.com/openwrt/openwrt/pull/21279
Signed-off-by: Robert Marko <robimarko@gmail.com>
It seems old website has been retired.
Signed-off-by: Yanase Yuki <dev@zpc.st>
Link: https://github.com/openwrt/openwrt/pull/21279
Signed-off-by: Robert Marko <robimarko@gmail.com>
U-Boot website has been moved to docs.u-boot.org.
Signed-off-by: Yanase Yuki <dev@zpc.st>
Link: https://github.com/openwrt/openwrt/pull/21279
Signed-off-by: Robert Marko <robimarko@gmail.com>
Inadvertently defining 'DEFAULT_VARIANT' on both ethool and
ethtool-full variants resulted in
$ make defconfig
tmp/.config-package.in:121615:error: recursive dependency detected!
tmp/.config-package.in:121615: symbol PACKAGE_ethtool-full is selected by PACKAGE_ethtool
tmp/.config-package.in:121605: symbol PACKAGE_ethtool depends on PACKAGE_ethtool-full
Fix this by simply undefining 'DEFAULT_VARIANT' on the ethtool-full
variant, which is ugly, but expedient.
Fixes: https://github.com/openwrt/openwrt/commit/f4fdb996
Signed-off-by: Eric Fahlgren <ericfahlgren@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21363
Signed-off-by: Robert Marko <robimarko@gmail.com>
Some packages with variants did not specify the default among the
alternatives, so were left without any apk 'provider_priority'
for that package. This caused the apk solver to select the wrong
variant, silently changing the requested package list.
Notable among these were busybox, procd and the hostapd/wpad suite.
This behavior presented in the imagebuilders when creating the
image as follows, silently replacing packages even when explicitly
requested:
$ make image PACKAGES=busybox
...
( 14/148) Installing busybox-selinux (1.37.0-r6)
...
We add 'DEFAULT_VARIANT:=1' to the packages that were missing one,
providing apk with sufficient information to choose the correct
package.
See link below for further examples and discussion.
Link: https://github.com/openwrt/openwrt/pull/21288#issuecomment-3704101422
Signed-off-by: Eric Fahlgren <ericfahlgren@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21358
Signed-off-by: Robert Marko <robimarko@gmail.com>
Switch rtl8812au-ct to use the new virtual kmod provides semantic.
Signed-off-by: George Sapkin <george@sapk.in>
Link: https://github.com/openwrt/openwrt/pull/21288
Signed-off-by: Robert Marko <robimarko@gmail.com>
Switch ath10k and related kmods to use the new virtual kmod provides
semantic and mark ath10k as the default variant.
Signed-off-by: George Sapkin <george@sapk.in>
Link: https://github.com/openwrt/openwrt/pull/21288
Signed-off-by: Robert Marko <robimarko@gmail.com>
Switch r8169 and related kmods to use the new virtual kmod provides
semantic and mark r8169 as the default variant.
Signed-off-by: George Sapkin <george@sapk.in>
Link: https://github.com/openwrt/openwrt/pull/21288
Signed-off-by: Robert Marko <robimarko@gmail.com>
Switch ca-certs provides to use the new virtual provides semantic that
enables ca-bundle and ca-certificates to be installed side-by-side.
Provide the new format virtual ca-certificates-any in ca-bundle.
Fixes: https://github.com/openwrt/openwrt/issues/21257
Signed-off-by: George Sapkin <george@sapk.in>
Link: https://github.com/openwrt/openwrt/pull/21288
Signed-off-by: Robert Marko <robimarko@gmail.com>
