diff --git a/target/linux/d1/patches-6.12/0015-riscv-dts-allwinner-d1-add-led-controller-node.patch b/target/linux/d1/patches-6.12/0015-riscv-dts-allwinner-d1-add-led-controller-node.patch
new file mode 100644
index 0000000000..271f1c5091
--- /dev/null
+++ b/target/linux/d1/patches-6.12/0015-riscv-dts-allwinner-d1-add-led-controller-node.patch
@@ -0,0 +1,60 @@
+From: Samuel Holland <samuel@sholland.org>
+Subject: riscv: dts: allwinner: d1: Add LED controller node
+Date: Sun, 29 Oct 2023 16:26:58 -0500
+
+Allwinner D1 contains an LED controller. Add its devicetree node, as
+well as the pinmux used by the reference board design.
+
+Acked-by: Guo Ren <guoren@kernel.org>
+Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
+Tested-by: Trevor Woerner <twoerner@gmail.com>
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+(no changes since v5)
+
+Changes in v5:
+ - New patch for v5
+
+ arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi      |  6 ++++++
+ arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi | 15 +++++++++++++++
+ 2 files changed, 21 insertions(+)
+
+--- a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
+@@ -59,6 +59,12 @@
+ 	};
+ 
+ 	/omit-if-no-ref/
++	ledc_pc0_pin: ledc-pc0-pin {
++		pins = "PC0";
++		function = "ledc";
++	};
++
++	/omit-if-no-ref/
+ 	uart0_pb8_pins: uart0-pb8-pins {
+ 		pins = "PB8", "PB9";
+ 		function = "uart0";
+--- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
++++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
+@@ -156,6 +156,21 @@
+ 			#reset-cells = <1>;
+ 		};
+ 
++		ledc: led-controller@2008000 {
++			compatible = "allwinner,sun20i-d1-ledc",
++				     "allwinner,sun50i-a100-ledc";
++			reg = <0x2008000 0x400>;
++			interrupts = <SOC_PERIPHERAL_IRQ(20) IRQ_TYPE_LEVEL_HIGH>;
++			clocks = <&ccu CLK_BUS_LEDC>, <&ccu CLK_LEDC>;
++			clock-names = "bus", "mod";
++			resets = <&ccu RST_BUS_LEDC>;
++			dmas = <&dma 42>;
++			dma-names = "tx";
++			status = "disabled";
++			#address-cells = <1>;
++			#size-cells = <0>;
++		};
++
+ 		gpadc: adc@2009000 {
+ 			compatible = "allwinner,sun20i-d1-gpadc";
+ 			reg = <0x2009000 0x400>;
diff --git a/target/linux/d1/patches-6.12/0016-riscv-dts-allwinner-d1-add-rgb-leds-to-boards.patch b/target/linux/d1/patches-6.12/0016-riscv-dts-allwinner-d1-add-rgb-leds-to-boards.patch
new file mode 100644
index 0000000000..c0adfd7ce2
--- /dev/null
+++ b/target/linux/d1/patches-6.12/0016-riscv-dts-allwinner-d1-add-rgb-leds-to-boards.patch
@@ -0,0 +1,70 @@
+From: Samuel Holland <samuel@sholland.org>
+Subject: riscv: dts: allwinner: d1: Add RGB LEDs to boards
+Date: Sun, 29 Oct 2023 16:26:59 -0500
+
+Some D1-based boards feature an onboard RGB LED. Enable them.
+
+Acked-by: Guo Ren <guoren@kernel.org>
+Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
+Tested-by: Trevor Woerner <twoerner@gmail.com>
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+(no changes since v5)
+
+Changes in v5:
+ - New patch for v5
+
+ .../boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts | 12 ++++++++++++
+ arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts   | 13 +++++++++++++
+ 2 files changed, 25 insertions(+)
+
+--- a/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts
+@@ -59,6 +59,18 @@
+ 	status = "okay";
+ };
+ 
++&ledc {
++	pinctrl-0 = <&ledc_pc0_pin>;
++	pinctrl-names = "default";
++	status = "okay";
++
++	multi-led@0 {
++		reg = <0x0>;
++		color = <LED_COLOR_ID_RGB>;
++		function = LED_FUNCTION_STATUS;
++	};
++};
++
+ &mmc1 {
+ 	bus-width = <4>;
+ 	mmc-pwrseq = <&wifi_pwrseq>;
+--- a/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
+@@ -22,6 +22,7 @@
+ 
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/input/input.h>
++#include <dt-bindings/leds/common.h>
+ 
+ /dts-v1/;
+ 
+@@ -121,6 +122,18 @@
+ 	};
+ };
+ 
++&ledc {
++	pinctrl-0 = <&ledc_pc0_pin>;
++	pinctrl-names = "default";
++	status = "okay";
++
++	multi-led@0 {
++		reg = <0x0>;
++		color = <LED_COLOR_ID_RGB>;
++		function = LED_FUNCTION_STATUS;
++	};
++};
++
+ &mdio {
+ 	ext_rgmii_phy: ethernet-phy@1 {
+ 		compatible = "ethernet-phy-ieee802.3-c22";