RouterBOOT v7 for NOR devices does not support the historic yaffs
"kernel" ELF boot method.
Generate a compatible kernel
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
RouterBOOT v7 for NOR devices does not support the historic yaffs
"kernel" ELF boot method.
Generate a compatible kernel
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
RouterBOOT v7 for NOR devices does not support the historic yaffs
"kernel" ELF boot method.
Generate a compatible kernel
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Adjust the YAFFS file path written depending on the sysupgrade
filename.
Default to kernel (for ELF), switch to bootimage (for NPK) if image name
has v7.
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Use OpenWrt's lzma loader for initramfs image
Due to mips kernel self extractor inability to relocate,
and RouterBoot on 760igs refusing to netboot an ELF with:
Entry point address: 0x80b91000
or greater: 0x80b81000 and below okay.
Note that this is only a bootloader ELF entry point limitation,
a 50MiB Linux + initramfs vmlinux will boot fine on 760igs.
With this lzma loader, netboot will occasionally freeze after
decompressing the kernel, but before starting vmlinux. It was considered
that an occasional netboot freeze was simpler to workaround than an
image that refuses to boot unless minimized.
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Add new mtdsplit parser "mstc-boot" for the devices manufactured by MSTC
(Mitra Star Technology Corp.). This is necessary to handle dual-boot on
those devices.
This parser splits kernel+rootfs or only rootfs(or UBI) based on the
image in the firmware partition or pre-defined partitions in dts, and
"bootnum" value in the "persist" (or "working") partition.
Note: "bootnum" is used for switching active firmware partitions on the
devices manufactured by MSTC and '1' or '2' are used on most
devices. But some devices use '0' or '1'. (example: I-O DATA
WN-DEAX1800GR)
Sequence:
1. obtain "bootnum" value
2. child nodes exsist (regardless of bootnum)
-> fixed partitions
(active parts : without bootnum (ex.: "kernel", "rootfs")
inactive parts: with bootnum (ex.: "kernel2", "rootfs2"))
3. current partition is active (dt bootnum == mtd bootnum)
-> image-based partitions
Device Tree:
- common
- mstc,bootnum : "bootnum" value for the mtd partition (0/1/2)
- mstc,persist : phandle of "persist" partition containing "bootnum"
value
- fixed partitions
- #address-cells: indicate cell count of address of child nodes (1)
- #size-cells : indicate cell count of size of child nodes (1)
- (child nodes) : define the child partitions
- reg : define the offset and size
- label-base : define the base name of the partition
- (example) : base:"kernel"->"kernel"(active)/"kernel2"(inactive)
example:
partition@3c0000 {
compatible = "mstc,boot";
reg = <0x3c0000 0x3240000>;
label = "firmware1";
mstc,bootnum = <1>;
mstc,persist = <&mtd_persist>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x0 0x800000>;
label-base = "kernel";
};
partition@800000 {
reg = <0x800000 0x2a40000>;
label-base = "ubi";
};
};
- image-based partitions
(no additional properties)
example:
partition@5a0000 {
compatible = "mstc,boot";
label = "firmware1";
reg = <0x5a0000 0x3200000>;
mstc,bootnum = <1>;
mstc,persist = <&mtd_persist>;
};
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18976
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The 6.12 testing kernel for ipq40xx target is ready now.
Tested on SKSpruce WIA3300-20.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18725
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
On the ipq40xx platform, the bus range is 1 - 255. Therefore, bus
number 0 is clearly incorrect. Change the bus number to 1, just
like other ipq40xx devices. This patch fixes the following dtc
warnings on 6.12 kernel:
qcom-ipq4019.dtsi:476.5-29: Warning (pci_device_bus_num): /soc/pcie@40000000/pcie@0/wifi@0,0:bus-range: PCI bus number 0 out of range, expected (1 - 255)
qcom-ipq4019.dtsi:476.5-29: Warning (pci_device_bus_num): /soc/pcie@40000000/pcie@0/wifi@0,0:bus-range: PCI bus number 0 out of range, expected (1 - 255)
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18725
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
- Remove duplicate PCIe bridge. A default bridge node has been
added upstream.
- Do not refer to the qca807x node. This node label has been
removed. We can disable the qca807x phy in mdio node.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18725
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add a bridge node label so that we can insert PCIe peripheral nodes.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18725
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Copy arch directory from 6.12 kernel to restore the default
6.6 device tree files.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18725
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Copy patches and kernel configs from 6.12 kernel to restore the
default 6.6 kernel support files.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18725
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This is a preparation for 6.12 kernel support. It can help us
track the device tree files history by using the Git tool.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18725
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This is a preparation for 6.12 kernel support. It can help us
track the patches and Kconfig history by using the Git tool.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18725
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This is a preparation for introducing the 6.12 kernel support.
All configs are automatically refreshed. In theory, they will
generate the same .config files in the kernel build directory
as before.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18725
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The prototype of `devm_platform_ioremap_resource_byname()` was defined
in `linux/platform_device.h`.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18725
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This function is only used by the current source file gcc-ipq4019.c.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18725
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The node name should include the reg property value. Fix warning:
qcom-ipq4019-lbr20.dts:415.17-449.4: Warning (i2c_bus_reg): /soc/i2c@78b7000/led-controller: I2C bus unit address format error, expected "27"
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18725
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The DRM modules for simple (ie. raw, non-eDP) panels can be used also
by platforms others than Freescale i.MX.
Create an individual package for it.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Not all targets support power management, some older or more simple
targets don't have CONFIG_PM set. Allow kernel module packages to
depend on USES_PM to only be available on targets which got
CONFIG_PM=y in their kernel config.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Partially revert commit 332645a610 ("uboot-mediatek: sync with
mtk-openwrt/u-boot 20250711") by dropping unused PHY drivers which come
with large embedded firmware (and are hence inacceptable for upstream)
and restoring our previous version of the Airoha EN8811H driver which is
known to work and load firmware from the eMMC boot1 hardware partition
instead of embedding it in the driver.
In future we may switch to the upstream Airoha EN8811H driver which
allows loading the firmware either from a filesystem or overloading the
en8811h_read_fw() for board which may eg. store that firmware directly
inside a eMMC hardware partition or UBI volume, like the BPi-R3 mini
does.
See also:
https://patchwork.ozlabs.org/project/uboot/patch/20250615131243.30770-1-lucienzx159@gmail.com/
Fixes: 332645a610 ("uboot-mediatek: sync with mtk-openwrt/u-boot 20250711")
Reported-by: Adrian Bente
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
The files-6.6 and files-6.12 folder contain the same content, merge them
into the files folder for both kernel versions.
Link: https://github.com/openwrt/openwrt/pull/19423
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
