Set nand flash for KN-1910
Sysupgrade or any other method i tried (asu, owut) not working without it. Tested with a local build.
Signed-off-by: Esat Yiğithan GÖKTOPRAK <eygoktoprak@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22311
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The bootcount init script is missing the executable bit (644 instead of 755),
causing the script to not be executable:
/etc/preinit: line 44: /etc/init.d/bootcount: Permission denied
Fixes: c3b8108a2b ("ramips: Add support for Xiaomi MiWiFi 3A")
Signed-off-by: Oliver Sedlbauer <os@dev.tdt.de>
Link: https://github.com/openwrt/openwrt/pull/22446
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The MIPS code assigns the clock node based on the device tree node name.
This name was renamed with kernel 6.12.58 and v6.6.117. Adapt our out of
tree device tree files to this rename to fix loading the STP GPIO
driver.
Without this fix the driver fails like this:
```
[ 0.320000] gpio-stp-xway 1e100bb0.stp: Failed to get clock
[ 0.330000] gpio-stp-xway 1e100bb0.stp: probe with driver gpio-stp-xway failed with error -2
```
Link: https://git.kernel.org/linus/b0d04fe6a633ada2c7bc1b5ddd011cbd85961868
Fixes: https://github.com/openwrt/openwrt/issues/21697
Co-Authored-By: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22444
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
mt76 tracks the PSM state of a sta internally with a wcid flag. TX to
such clients is skipped based on the presence of this flag.
This flag was not added to the PS state notify handler for MT7915 chips.
Without this flag, mt76 queues pending frames to the hardware,
accounting for airtime when a PSM notification is received while in a TX
iteration.
Set the PS flag for the STA WCID to prevent this from happening. TX gets
skipped in presence of this flag.
Link: https://patchwork.kernel.org/project/linux-wireless/patch/20260313112502.2026974-1-mail@david-bauer.net/
Signed-off-by: David Bauer <mail@david-bauer.net>
Certain targets for an7581 and an7583 referred to kmod-pwm-airoha;
however in the target modules makefile the module is referred to
as kmod-pwm-an7581, causing buildbot to fail.
Change the name of kmod-pwm-an7581 to kmod-pwm-airoha to resolve this.
Signed-off-by: Kenneth Kasilag <kenneth@kasilag.me>
Link: https://github.com/openwrt/openwrt/pull/22445
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add a help text for the new --force-reinstall option, so that users
will actually find the new option.
(Also refresh patches)
Improves: 91cff1a "apk: add --force-reinstall option"
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Link: https://github.com/openwrt/openwrt/pull/22426
Signed-off-by: Robert Marko <robimarko@gmail.com>
W1700K fan script is missing the #!/bin/sh /etc/rc.common shebang and
requires execution bits set. Also, set the fallback to hwmon 3 instead
of 5, since the new RTL PHY driver was not merged.
Signed-off-by: Andrew LaMarche <andrewjlamarche@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22391
Signed-off-by: Robert Marko <robimarko@gmail.com>
Note that for working G.hn support some packages need to be extracted from the Devolo firmware.
Signed-off-by: Julius Schwartzenberg <julius.schwartzenberg@eclipso.eu>
Link: https://github.com/openwrt/openwrt/pull/22123
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Developers no longer maintain this driver. And it has been replaced
by the new upstream implementation. It's time to say goodbye.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22214
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This is the generic PWM framework driver for Mediatek SoC. Now
this module is ready for MT7628.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22214
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The upstream MediaTek PWM driver requires these clock sources to
work properly.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22214
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
When running `make kernel_menuconfig`, CPU_BIG_ENDIAN is selected by
default, resulting in a non-bootable image. Add CPU_LITTLE_ENDIAN to
avoid that.
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22282
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The device dts files were moved to the dedicated directory in commit
a66e30631c ("qualcommax: move Device DTS to dedicated DTS directory"),
which resulted in a merge conflict.
Fixes: d755c49f7a ("qualcommax: ipq60xx: rename TP-Link EAP623-Outdoor HD v1 compatible")
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22433
Signed-off-by: Robert Marko <robimarko@gmail.com>
Remove unmatched endif.
fixes: 2948dbebbf ("mac80211: use OpenWrt mirror for b43 fw downloads")
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22430
Signed-off-by: Robert Marko <robimarko@gmail.com>
This commit adds support for RTL9607C / RTL8198D thermal controller.
Based on the Realtek SDK code.
Signed-off-by: Rustam Adilov <adilov@tutamail.com>
Link: https://github.com/openwrt/openwrt/pull/22081
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The RTL8226 PHYs in Zyxel XGS1010-10 and XGS1210-10 rev A1 have swapped
MDI lanes. Specify this in the device tree, so the driver can configure
it. With this change, the PHYs no longer require initialization by the
bootloader.
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Link: https://github.com/openwrt/openwrt/pull/21261
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The PHY supports swapping the MDI pairs (ABCD->DCBA) to simplify board
layout. On devices making use of this, it needs to be configured in the
driver, otherwise the PHY won't work properly.
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Link: https://github.com/openwrt/openwrt/pull/21261
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
% git shortlog v1.0.20250521..v1.0.20260223
Doug Freed (1):
wg-quick@.service: add deps on wg-quick.target
Jason A. Donenfeld (8):
wg-quick: linux: use smallest mtu, not largest
syncconf: account for psks removed from config file
wg-quick: linux: deal with resolvconf migration more gracefully
wg-quick: use addconf instead of setconf
wg-quick: linux: do not unnecessarily set sysctl
config: preserve const correctness
syncconf: account for persistent keepalive removed from config file
version: bump
Robyn Kosching (1):
wg-quick: pass on # comments to {Pre,Post}{Up,Down}
Build system: x86/64
Build-tested: x86/64-glibc
Run-tested: x86/64-glibc
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/22190
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The dsa irq handler works always in the same way for all SoCs.
- Read register ISR_PORT_LINK_STS_CHG to determine the ports that
triggered the irq.
- Write the read value back to the register to confirm the irq
- Read link status via MAC_LINK_STS
- Trigger dsa_port_phylink_mac_change() for each changed port
Currently each SoC has its own implementation. Drop that in
favour of a generic implementation that makes use of the existing
bit register read/write helpers.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/22273
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This register will be needed to provide a generic irq handler. Add
it to the configuration structure of the driver.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/22273
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Some 10G optics showed random "module transmit fault indicated" due to I2C
read errors on ONTi ONT-S508CL-8S/XikeStor SKS8300-8X switches. The same
modules work with the original firmware and on other Linux based devices.
There seems to be some differences in how we talk to those modules using
I2C in OpenWRT. To fix this this patch adds support for 50kHz I2C speed on
SFPs and enables that for XikeStor/Onti devices. Since SFPs only transmit
very few bytes this should not have any real downsides.
This patch configures I2C to use 50kHz clock in the DTS for the affected
devices. For it to work it requires a change in the RTL9300 I2C driver.
This can be safely merged without the kernel change (but will not work
in that case as it will fall back to 100kHz).
Signed-off-by: Jan Kantert <jan-openwrt@kantert.net>
Link: https://github.com/openwrt/openwrt/pull/22210
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Release Notes:
https://github.com/madler/zlib/blob/v1.3.2/ChangeLog
We also switch package tarball source to GitHub repository releases
to avoid package hash mismatch after the zstd upgrade.
The 005-* patch was suppressed by the upstream commit 15ba5055a935
("CMake: Adapt pkgconfig-file to the GnuInstallDirs layout.")
This patch also adjust the zlib.pc file path as it was changed in
the latest release.
The mipsel_24kc 'zlib' package size will increase by about 1 kB.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21228
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Release Notes:
https://github.com/madler/zlib/blob/v1.3.2/ChangeLog
We also switch package tarball source to GitHub repository releases
to avoid package hash mismatch after the zstd upgrade.
The 900-* patch was suppressed by the upstream commit 15ba5055a935
("CMake: Adapt pkgconfig-file to the GnuInstallDirs layout.")
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21228
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
There is no point in printing the missing M3 memory dump adress message
on each boot under the warning level, as not all boards need it at all.
So, degrate it to a debug print with QMI mask.
Signed-off-by: Robert Marko <robimarko@gmail.com>
No functional changes intended.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://github.com/openwrt/openwrt/pull/22350
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The main difference between EAP610, 623, and 625 is the device name,
support string, and the BDF package. Move the others to a common
Device/tplink_eap6xx-common in order to highlight the common aspects.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18804
Signed-off-by: Robert Marko <robimarko@gmail.com>
The EAP625 and EAP623 are extremely similar. The only difference in
the vendor's device tree is that EAP625 also enables USB and UART2.
Use the eap6xx dtsi instead of writing out a full devicetree.
The EAP623 uses the same RTL8211F as the 625 and 610. Since this is
a gigabit PHY, it is okay to change the ess mac mode from SGMII_PLUS
to SGMII. This is now consistent across all three devices.
Move the 'realtek,clkout-disable' and 'realtek,aldps-enable' PHY
properties to the common dtsi, as they work well on all three devices.
Reflect the remaining differences in the eap625 dts.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18804
Signed-off-by: Robert Marko <robimarko@gmail.com>
As I was looking at the differences between EAP610, 623, and 625
Outdoor, I realized that the quick-start guide of all of the devices
mentions a yellow and green LED. Thus rename the "amber" led to
"yellow", and adjust its color ID accordingly.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18804
Signed-off-by: Robert Marko <robimarko@gmail.com>
Originally, the .compatible string for EAP623-Outdoor HD tried to
shorten the "-outdoor" to "od". However, this naming was inconsistent
with the existing "eap610-outdoor". As "od" is not a common shorthand,
spell out the complete word: "eap623-outdoor-hd-v1".
Fixes: 5dbf93c8c5 ("ipq60xx: add support for TP-Link EAP623-Outdoor HD v1")
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18804
Signed-off-by: Robert Marko <robimarko@gmail.com>
CI is currently failing due to these four patches.
Automatically refreshed with `make target/linux/refresh`.
Signed-off-by: Kenneth Kasilag <kenneth@kasilag.me>
Link: https://github.com/openwrt/openwrt/pull/22399
Signed-off-by: Robert Marko <robimarko@gmail.com>
Userspace handling is deprecated.
Since the u-boot ethaddr variable is quoted, we cannot use it.
Use mac-base instead to specify in dts.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/14182
Signed-off-by: Robert Marko <robimarko@gmail.com>
Userspace handling is deprecated.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/14182
Signed-off-by: Robert Marko <robimarko@gmail.com>
Userspace handling is deprecated.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/14182
Signed-off-by: Robert Marko <robimarko@gmail.com>
Removes deprecated userspace handling.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/14182
Signed-off-by: Robert Marko <robimarko@gmail.com>
- Fix RTL8261N 10GbE PHY `reset-deassert-us` from 100ms to 221ms to meet datasheet minimum SMI-ready timing (t7 >= 150ms), fixing intermittent boot stalls caused by MDIO bus instability
- Add missing WLAN toggle button (GPIO 34) present in stock firmware but absent from OpenWrt DTS
- Fix memory size from 1 GB to the actual 512 MB
Fix 1: The RTL8261N 10GbE PHY's `reset-deassert-us` was set to 100ms (100000us), but the **RTL8261N datasheet (Table 108, parameter t7)** specifies a minimum **SMI-ready time of 150ms** after nRESET release before the MDIO (SMI) bus can be used.
With only 100ms, the kernel attempts MDIO bus access before the RTL8261N's SMI interface is stable. Since the RTL8261N (mdio-bus:00) and the internal MT7988 2.5GbE PHY (mdio-bus:0f) share the same MDIO bus, a not-yet-ready RTL8261N disrupts all MDIO traffic, causing the 2.5GbE PHY firmware loading (`mt798x_2p5ge_phy_config_init`) to stall.
Observed symptoms on warm reboot:
- Sometimes `mt798x_2p5ge_phy_config_init` hangs for 5+ minutes or indefinitely
- RCU CPU stalls (`rcu: INFO: rcu_sched detected stalls on CPUs`)
- mt7996e WiFi chip message timeouts cascading to `chip full reset failed`
- System appears hung with only power LED blinking slowly
UART serial log evidence (warm reboot with 100ms):
```
[ 73.041756] rcu: INFO: rcu_sched self-detected stall on CPU
[ 73.048341] rcu: 2-....: (8 ticks this GP)
[ 73.061641] pc : mt798x_2p5ge_phy_config_init+0x258/0xbb0
[ 73.061653] lr : mt798x_2p5ge_phy_config_init+0x238/0xbb0
...
[ 334.771280] MediaTek MT7988 2.5GbE PHY mdio-bus:0f: Firmware date code: 2024/10/30
```
The 2.5GbE PHY firmware loading, which normally takes ~3 seconds, took **325 seconds** due to MDIO bus instability. In the worst case, the system never recovers.
GPL DTS uses 221ms (`reset-deassert-us = <221000>`), providing 71ms of margin above the 150ms datasheet minimum. All MediaTek MT7988 reference board DTS files in the GPL use this same 221ms value.
Fix 2: Missing WLAN button (GPIO 34)
The BE450 has a physical WLAN toggle button on GPIO 34, defined in the stock TP-Link GPL DTS but missing from the OpenWrt DTS. Without this definition, the button is non-functional under OpenWrt.
The pin name for GPIO 34 in the MT7988 pinctrl is `SPI2_MISO`, confirmed by the kernel pinctrl driver (`pinctrl-mt7988.c`: `MT7988_PIN(34, "SPI2_MISO")`) and the official devicetree binding (`mediatek,mt7988-pinctrl.yaml`).
Note: GPIO 34 is also used by the BE450's First U-Boot as a recovery button (web recovery 192.168.1.1). Registering it in the DTS ensures the kernel claims the pin.
Fix 3: Incorrect memory size in DTS
The OpenWrt DTS declares 1 GB (`0x40000000`) of RAM, but the BE450 has 512 MB (`0x20000000`).
Run tested.
Signed-off-by: Semih Baskan <strst.gs@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22386
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The current CMU setup was just copied and slightly adjusted from the
SDK, lacks functionality and logic and doesn't cover all cases we need
(same in the SDK due to multiple reasons). The existing implementation
for RTL930x covers all that and can be reused for RTL931x. Previous
patches made this generic and now we can add the remaining missing
pieces to actually use it for RTL931x. This only includes
implementations for the few variant-specific actions within the
implementation, linking them properly and calling the CMU configuration.
Drop the old CMU code for RTL931x then since it's not needed anymore.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22198
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Improve the RTL931x mapper to infer the CMU page from the hardware mode
by replace unneeded with useful comments, returning a better error code
and dropping irrelevant parts.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22198
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Do some slight improvements to the generic CMU configuration for
RTL93xx. This covers several points:
- update comments to the current reality
- add fast path to avoid issues and unneeded calls
- use cached mode value instead of register read
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22198
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Generalize the RTL930x CMU configuration to support RTL931x as well.
Both implementations differ only in minor details, allowing them to
share common code and avoid duplication.
Affected functions are moved up in the code to the 93xx common area and
slightly renamed. Existing variant-specific functions are adjusted too
and assigned to the previously added SerDes operation hooks.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22198
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add new SerDes ops for CMU management to be able to share common
behavior of CMU configuration for RTL930x and RTL931x while still
covering variant specifics.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22198
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Fix naming of several functions to better reflect what they are doing.
While at it, also improve the error handling a lot, changing the return
type from void to int and actually returning errors.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22198
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
