Use blobmsg_add_u32 for non-bool fields in order to avoid wrong
interpretations of the data on JSON/ucode conversion.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The Reporting Detail value is a 1-byte field, but was written as le16,
producing a 2-byte write that also contradicts the length field of 1
in the subelement header.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The reporting detail subelement (up to 3 bytes) was not accounted for
in the wpabuf allocation, causing a crash when reporting_detail is set
to a valid value (0, 1, or 2).
Signed-off-by: Felix Fietkau <nbd@nbd.name>
A size of 600 is incomplete in that calibration data is not included,
resulting in low TX power.
Fixes: 64dae105 ("ramips: mt76x8: add support for Yuncore CPE200")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22459
Signed-off-by: Robert Marko <robimarko@gmail.com>
After 02e2065203, it can happen that both,
[VHT160-80PLUS80] and [VHT160] are added to the vht_capab option in
an AP's hostapd.conf, which would cause a failure to start the AP.
Fix the logic in order to prevent such misconfiguration.
Fixes: #22481
Signed-off-by: Shine <4c.fce2@proton.me>
Link: https://github.com/openwrt/openwrt/pull/22482
Signed-off-by: Robert Marko <robimarko@gmail.com>
The dtsi used handles a bunch of non-DBDC platforms where the
assignments are correct. The 3040-a1 is different as there are 3 instead
of 2 wifi interfaces and WAN needs to be incremented by 1.
Remove userspace wifi assignmwent which was needed before per band nvmem
was supported.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21977
Signed-off-by: Robert Marko <robimarko@gmail.com>
While rebasing, a typo was made where the ';;' terminator was omitted in
the 02_network script. Add it to restore script functionality.
Fixes: e210d994fa ("airoha: an7581: add Nokia Valyrian support")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
- Update network port names based on the shell
- Fix boot log errors:
OF: /soc/pcie@11280000/pcie@0,0: Missing device_type
- Match vendor firmware Ethernet and wireless MAC addresses
LAN MAC 50:xx:xx:xx:xx:60
WAN MAC 50:xx:xx:xx:xx:61
2G MAC 50:xx:xx:xx:xx:63
5G MAC 50:xx:xx:xx:xx:65
Fixes: 7d79346581 ("mediatek: filogic: add support for Tenda BE12 Pro")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/22060
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Add support for Nokia Valyrian based on Airoha AN7581 SoC.
Device specification
--------------------
SoC Type: Airoha AN7581
RAM: 2x DDR4 Nanya NT5AD256M16E4-JR (1GB)
Flash: eMMC Macronix MX52LM08A11XVW (1GB)
Ethernet: 3x gigabit via AN7581, 1x 10g via AS21x1x, 1x SFP cage
Wi-Fi: MT7996 - BE19000
LEDs: 11 LED via 2x 74HC595 shift register
Button: Reset, WPS, WiFi
USB ports: 1x 2.0
Miscellaneous: 1x Power Monitor via RTQ6059, 2x FXS port
Device is unfused and is originally flashed with Airoha SDK bootloader
that require signed images.
Bootloader is username/password protected and use the leaked auth combo
that can be found online.
From the bootloadet instruction on how to flash custom bootloader are:
1. mmc erase 0 0x800
2. tftpboot 192.168.1.10:airoha/an7581/openwrt-airoha-an7581-nokia_valyrian-preloader.bin
3. mmc write $loadaddr 0x4 0xfc
4. tftpboot 192.168.1.10:airoha/an7581/openwrt-airoha-an7581-nokia_valyrian-bl31-uboot.fip
5. mmc write $loadaddr 0x100 0x700
It's also possible to use the Emergency Recovery procedure:
From powered OFF device:
1. Keep the reset button pressed (middle button)
2. Power on the device
3. Notice the "Press x" prompt
4. Press x
5. Notice the "C" char waiting for XMODEM load
6. Load the preloader binary with XMODEM protocol
7. Notice the "Press x to load BL31 + U-Boot FIP"
8. Press x
9. Notice the "C" char waiting for XMODEM load
10. Load the fip binary with XMODEM protocol
11. You are now in U-Boot loaded from serial
12. Follow normal procedure to flash bootloader
Due to BOOTROM limitation. the device can't have a standard GPT table
implementation. Because of this fixed-partitions are used to handle this.
U-Boot still doesn't have support for this (it's planned) and currently to flash
and load and image it's needed to write and read from static address in eMMC.
The GPT partition table follow Prpl guidelines with dual partition table with
kernel and rootfs split.
The address for kernel is 0xb00000 and the address for rootfs is 0x1b00000.
Link: https://github.com/openwrt/openwrt/pull/21761
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add support for Nokia Valyrian device that implement similar spec of an
Airoha AN7581 RFB board.
Link: https://github.com/openwrt/openwrt/pull/21761
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Use linux-firmware repository for IPQ5018, IPQ8074 and QCN9074.
All officially released firmware versions are available there.
Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21833
Signed-off-by: Robert Marko <robimarko@gmail.com>
Set nand flash for KN-1910
Sysupgrade or any other method i tried (asu, owut) not working without it. Tested with a local build.
Signed-off-by: Esat Yiğithan GÖKTOPRAK <eygoktoprak@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22311
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The bootcount init script is missing the executable bit (644 instead of 755),
causing the script to not be executable:
/etc/preinit: line 44: /etc/init.d/bootcount: Permission denied
Fixes: c3b8108a2b ("ramips: Add support for Xiaomi MiWiFi 3A")
Signed-off-by: Oliver Sedlbauer <os@dev.tdt.de>
Link: https://github.com/openwrt/openwrt/pull/22446
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The MIPS code assigns the clock node based on the device tree node name.
This name was renamed with kernel 6.12.58 and v6.6.117. Adapt our out of
tree device tree files to this rename to fix loading the STP GPIO
driver.
Without this fix the driver fails like this:
```
[ 0.320000] gpio-stp-xway 1e100bb0.stp: Failed to get clock
[ 0.330000] gpio-stp-xway 1e100bb0.stp: probe with driver gpio-stp-xway failed with error -2
```
Link: https://git.kernel.org/linus/b0d04fe6a633ada2c7bc1b5ddd011cbd85961868
Fixes: https://github.com/openwrt/openwrt/issues/21697
Co-Authored-By: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22444
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
mt76 tracks the PSM state of a sta internally with a wcid flag. TX to
such clients is skipped based on the presence of this flag.
This flag was not added to the PS state notify handler for MT7915 chips.
Without this flag, mt76 queues pending frames to the hardware,
accounting for airtime when a PSM notification is received while in a TX
iteration.
Set the PS flag for the STA WCID to prevent this from happening. TX gets
skipped in presence of this flag.
Link: https://patchwork.kernel.org/project/linux-wireless/patch/20260313112502.2026974-1-mail@david-bauer.net/
Signed-off-by: David Bauer <mail@david-bauer.net>
Certain targets for an7581 and an7583 referred to kmod-pwm-airoha;
however in the target modules makefile the module is referred to
as kmod-pwm-an7581, causing buildbot to fail.
Change the name of kmod-pwm-an7581 to kmod-pwm-airoha to resolve this.
Signed-off-by: Kenneth Kasilag <kenneth@kasilag.me>
Link: https://github.com/openwrt/openwrt/pull/22445
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add a help text for the new --force-reinstall option, so that users
will actually find the new option.
(Also refresh patches)
Improves: 91cff1a "apk: add --force-reinstall option"
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Link: https://github.com/openwrt/openwrt/pull/22426
Signed-off-by: Robert Marko <robimarko@gmail.com>
W1700K fan script is missing the #!/bin/sh /etc/rc.common shebang and
requires execution bits set. Also, set the fallback to hwmon 3 instead
of 5, since the new RTL PHY driver was not merged.
Signed-off-by: Andrew LaMarche <andrewjlamarche@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22391
Signed-off-by: Robert Marko <robimarko@gmail.com>
Note that for working G.hn support some packages need to be extracted from the Devolo firmware.
Signed-off-by: Julius Schwartzenberg <julius.schwartzenberg@eclipso.eu>
Link: https://github.com/openwrt/openwrt/pull/22123
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Developers no longer maintain this driver. And it has been replaced
by the new upstream implementation. It's time to say goodbye.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22214
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This is the generic PWM framework driver for Mediatek SoC. Now
this module is ready for MT7628.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22214
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The upstream MediaTek PWM driver requires these clock sources to
work properly.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22214
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
When running `make kernel_menuconfig`, CPU_BIG_ENDIAN is selected by
default, resulting in a non-bootable image. Add CPU_LITTLE_ENDIAN to
avoid that.
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22282
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The device dts files were moved to the dedicated directory in commit
a66e30631c ("qualcommax: move Device DTS to dedicated DTS directory"),
which resulted in a merge conflict.
Fixes: d755c49f7a ("qualcommax: ipq60xx: rename TP-Link EAP623-Outdoor HD v1 compatible")
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22433
Signed-off-by: Robert Marko <robimarko@gmail.com>
Remove unmatched endif.
fixes: 2948dbebbf ("mac80211: use OpenWrt mirror for b43 fw downloads")
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22430
Signed-off-by: Robert Marko <robimarko@gmail.com>
This commit adds support for RTL9607C / RTL8198D thermal controller.
Based on the Realtek SDK code.
Signed-off-by: Rustam Adilov <adilov@tutamail.com>
Link: https://github.com/openwrt/openwrt/pull/22081
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The RTL8226 PHYs in Zyxel XGS1010-10 and XGS1210-10 rev A1 have swapped
MDI lanes. Specify this in the device tree, so the driver can configure
it. With this change, the PHYs no longer require initialization by the
bootloader.
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Link: https://github.com/openwrt/openwrt/pull/21261
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The PHY supports swapping the MDI pairs (ABCD->DCBA) to simplify board
layout. On devices making use of this, it needs to be configured in the
driver, otherwise the PHY won't work properly.
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Link: https://github.com/openwrt/openwrt/pull/21261
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
% git shortlog v1.0.20250521..v1.0.20260223
Doug Freed (1):
wg-quick@.service: add deps on wg-quick.target
Jason A. Donenfeld (8):
wg-quick: linux: use smallest mtu, not largest
syncconf: account for psks removed from config file
wg-quick: linux: deal with resolvconf migration more gracefully
wg-quick: use addconf instead of setconf
wg-quick: linux: do not unnecessarily set sysctl
config: preserve const correctness
syncconf: account for persistent keepalive removed from config file
version: bump
Robyn Kosching (1):
wg-quick: pass on # comments to {Pre,Post}{Up,Down}
Build system: x86/64
Build-tested: x86/64-glibc
Run-tested: x86/64-glibc
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/22190
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The dsa irq handler works always in the same way for all SoCs.
- Read register ISR_PORT_LINK_STS_CHG to determine the ports that
triggered the irq.
- Write the read value back to the register to confirm the irq
- Read link status via MAC_LINK_STS
- Trigger dsa_port_phylink_mac_change() for each changed port
Currently each SoC has its own implementation. Drop that in
favour of a generic implementation that makes use of the existing
bit register read/write helpers.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/22273
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This register will be needed to provide a generic irq handler. Add
it to the configuration structure of the driver.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/22273
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Some 10G optics showed random "module transmit fault indicated" due to I2C
read errors on ONTi ONT-S508CL-8S/XikeStor SKS8300-8X switches. The same
modules work with the original firmware and on other Linux based devices.
There seems to be some differences in how we talk to those modules using
I2C in OpenWRT. To fix this this patch adds support for 50kHz I2C speed on
SFPs and enables that for XikeStor/Onti devices. Since SFPs only transmit
very few bytes this should not have any real downsides.
This patch configures I2C to use 50kHz clock in the DTS for the affected
devices. For it to work it requires a change in the RTL9300 I2C driver.
This can be safely merged without the kernel change (but will not work
in that case as it will fall back to 100kHz).
Signed-off-by: Jan Kantert <jan-openwrt@kantert.net>
Link: https://github.com/openwrt/openwrt/pull/22210
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Release Notes:
https://github.com/madler/zlib/blob/v1.3.2/ChangeLog
We also switch package tarball source to GitHub repository releases
to avoid package hash mismatch after the zstd upgrade.
The 005-* patch was suppressed by the upstream commit 15ba5055a935
("CMake: Adapt pkgconfig-file to the GnuInstallDirs layout.")
This patch also adjust the zlib.pc file path as it was changed in
the latest release.
The mipsel_24kc 'zlib' package size will increase by about 1 kB.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21228
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Release Notes:
https://github.com/madler/zlib/blob/v1.3.2/ChangeLog
We also switch package tarball source to GitHub repository releases
to avoid package hash mismatch after the zstd upgrade.
The 900-* patch was suppressed by the upstream commit 15ba5055a935
("CMake: Adapt pkgconfig-file to the GnuInstallDirs layout.")
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21228
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
There is no point in printing the missing M3 memory dump adress message
on each boot under the warning level, as not all boards need it at all.
So, degrate it to a debug print with QMI mask.
Signed-off-by: Robert Marko <robimarko@gmail.com>
No functional changes intended.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://github.com/openwrt/openwrt/pull/22350
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The main difference between EAP610, 623, and 625 is the device name,
support string, and the BDF package. Move the others to a common
Device/tplink_eap6xx-common in order to highlight the common aspects.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18804
Signed-off-by: Robert Marko <robimarko@gmail.com>
The EAP625 and EAP623 are extremely similar. The only difference in
the vendor's device tree is that EAP625 also enables USB and UART2.
Use the eap6xx dtsi instead of writing out a full devicetree.
The EAP623 uses the same RTL8211F as the 625 and 610. Since this is
a gigabit PHY, it is okay to change the ess mac mode from SGMII_PLUS
to SGMII. This is now consistent across all three devices.
Move the 'realtek,clkout-disable' and 'realtek,aldps-enable' PHY
properties to the common dtsi, as they work well on all three devices.
Reflect the remaining differences in the eap625 dts.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18804
Signed-off-by: Robert Marko <robimarko@gmail.com>
As I was looking at the differences between EAP610, 623, and 625
Outdoor, I realized that the quick-start guide of all of the devices
mentions a yellow and green LED. Thus rename the "amber" led to
"yellow", and adjust its color ID accordingly.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18804
Signed-off-by: Robert Marko <robimarko@gmail.com>
Originally, the .compatible string for EAP623-Outdoor HD tried to
shorten the "-outdoor" to "od". However, this naming was inconsistent
with the existing "eap610-outdoor". As "od" is not a common shorthand,
spell out the complete word: "eap623-outdoor-hd-v1".
Fixes: 5dbf93c8c5 ("ipq60xx: add support for TP-Link EAP623-Outdoor HD v1")
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18804
Signed-off-by: Robert Marko <robimarko@gmail.com>
CI is currently failing due to these four patches.
Automatically refreshed with `make target/linux/refresh`.
Signed-off-by: Kenneth Kasilag <kenneth@kasilag.me>
Link: https://github.com/openwrt/openwrt/pull/22399
Signed-off-by: Robert Marko <robimarko@gmail.com>
