Currently, the 02_network script always configures MAC addresses for
each individual LAN port unless "lan_mac_start" is set to "skip". This
behaviour can be unexpected, and is also somewhat broken, as it even
continues to do so when "lan_mac_start" is empty.
Change it to only do the configuration if "lan_mac_start" is non-empty,
and also remove the fallback to "lan_mac", making this more obvious and
less error-prone.
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Link: https://github.com/openwrt/openwrt/pull/21644
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The MAC address assignment for XikeStor SKS8300-8T and SKS8300-12E2T2X
is semantically identical to the first case, so let's combine them.
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Link: https://github.com/openwrt/openwrt/pull/21644
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
There is a missing tab in one of the cases of MAC address configuration.
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Link: https://github.com/openwrt/openwrt/pull/21644
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
patch netlink headers for netifd PSE support
& fix PSE backports for PSE Prio
The 626-* patches are backporting net PSE-PD from
linux 6.18 to 6.12. The 627-02 is a nearly verbatim
copy of the upstream commit. The 6.12-01 patches the
auto generated ethtool_netlink_generated header.
The 6.12 build tools do not have the build system
feature for generating the correct netlink
headers related to the backports.
Signed-off-by: Carlo Szelinsky <github@szelinsky.de>
Link: https://github.com/openwrt/openwrt/pull/21926
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Upstream solution came with 6.4. Seems quilt refreshed it to the extent
that it basically gets applied twice.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21954
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
7e5b324 instance: check length of names when creating cgroups
014f94c procd: jail/cgroups: fix OOB write in cgroups_apply()
e08cdc8 hotplug-dispatch: fix filter disallowing setting PATH
afa4391 service instance: Improve handling of watchdog config changes
52c64d2 service instance: Fix overwriting of watchdog linked list members
96c827f coldplug: fix missing header include
6b10c71 hotplug-dispatch: fix missing header include
58d7aaa initd/coldplug: create /dev/null before running udevtrigger
64f97ff hotplug-dispatch: redirect output to /dev/null
c4e9859 hotplug-dispatch: use stat if d_type is DT_UNKNOWN
bafdfff system: fix arguments validation in ubus handler
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Use the added support for generating per device targz rootfs so that images
generated for Methode devices when CONFIG_TARGET_MULTI_PROFILE and
CONFIG_TARGET_PER_DEVICE_ROOTFS are set, we actually get the targz rootfs
that respects DEVICE_PACKAGES.
Currently, buildbot generated images have no networking, LM75 nor I2C
working, as the generated images do not include required kmods that are
listed in DEVICE_PACKAGES.
While at it, there is no need for tar to run in verbose mode.
Fixes: 7dff6a8c89 ("mvebu: uDPU: add sysupgrade support")
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Currently, for targets that use the CONFIG_TARGET_ROOTFS_TARGZ a single
rootfs tarball is generated for the subtarget based of $(TARGET_DIR).
However, this means that it does not respect DEVICE_PACKAGES like other
rootfs images.
So, lets augment CONFIG_TARGET_ROOTFS_TARGZ by adding a proper targz fstype
so that per device rootfs is generated under lock.
This is required so that devices that use custom sysupgrade archives like
Methode devices, can actually include a per device rootfs so when building
for multiple devices and with CONFIG_TARGET_PER_DEVICE_ROOTFS set the built
image actually includes the listed DEVICE_PACKAGES.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Mikrotik RBM33G has got a USB-A port and mPCIe slots with USB 3.0 and USB
2.0 interfaces in use. The MediaTek MT7621 SoC has got an xHCI to provide
these interfaces. Therefore, enable kmod-usb3 to support them.
Fixes: 5684d08741 ("ramips: Add support for Mikrotik RouterBOARD RBM33g")
Signed-off-by: Chester A. Unal <chester.a.unal@arinc9.com>
The bus reset functions currently configure a lot of things. Looking
closely they have a topology setup and a polling setup part. Split the
big chunk in smaller better readable functions.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21906
Signed-off-by: Robert Marko <robimarko@gmail.com>
The downstream Realtek phy module is currently known as rtl83xx-phy.c
and its kernel config REALTEK_SOC_PHY. It has been simplified, cleaned
and now aligns to Realtek main module (upstream Realtek phy). It is no
longer tied to the Realtek switch SoC but serves as generic module for
1Gbit multiport phys. Adapt it as follows:
- place it into the realtek folder aside its upstream sibling
- rename it to realtek_multiport.c
- remove SoC dependency in Kconfig and Makefile
- change kernel configs for the targets accordingly
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21929
Signed-off-by: Robert Marko <robimarko@gmail.com>
Drop some lines that are not needed any longer.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21929
Signed-off-by: Robert Marko <robimarko@gmail.com>
If nvmem is used for ethernet mac address, we need to defer loading to
get the proper mac.
Move to probe as ndo_init is the wrong place to handle EPROBE_DEFER.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21920
Signed-off-by: Robert Marko <robimarko@gmail.com>
When config_change is set during an active setup (e.g. by a concurrent
reconf call), wdev_mark_up() attempted to call setup() while still in
"setup" state. Since setup() requires state "up" or "down", it silently
returned, leaving the state as "setup". The subsequent wdev_setup_cb()
then treated this as a setup failure, triggering an unnecessary
teardown+restart cycle.
Fix this by removing the config_change handling from wdev_mark_up() and
moving it to wdev_setup_cb() instead. wdev_mark_up() now always
transitions to "up" state. When wdev_setup_cb() runs afterwards and
finds the device already "up" with config_change set, it initiates a
clean re-setup from the "up" state where setup() can run.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The Sophos SG/XG-125 revision 3 like the already supported SG/XG-135
revision 3 has odd numbering of eth ports where the WAN port (as marked
on the case) is: `eth6` and `eth0`, `eth1`, `eth2`, `eth3`, `eth5`, `eth7`,
`eth8` are LAN ports.
Port `eth4` confirmed to be the SFP port.
Signed-off-by: Raylynn Knight <rayknight@me.com>
Link: https://github.com/openwrt/openwrt/pull/21914
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Commit 01a87f4bd0 changed the encryption
setting of the default SSID "OpenWrt" from "none" to "open". The correct
setting as per the documentation [1] is "none", though.
While this invalid setting won't cause a wrong hostapd setup, it will
at least cause malfunction in LuCI.
Change the default encryption setting back to "none".
[1] https://openwrt.org/docs/guide-user/network/wifi/basic#encryption_modes
Fixes: 01a87f4bd0
Signed-off-by: Shine <4c.fce2@proton.me>
Link: https://github.com/openwrt/openwrt/pull/21925
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
meraki_loadaddr=1000000 may not enough to boot openwrt 25.12+ on mx60,
so directly sysupgrade without changing meraki_loadaddr would result
broken, but the u-boot-env partition used to be marked read-only, so
compat_version had better be incremented to show a notification to
direct users to the wiki to prepare the sysupgrade manually.
Signed-off-by: Edward Chow <equu@openmail.cc>
Link: https://github.com/openwrt/openwrt/pull/21912
Signed-off-by: Robert Marko <robimarko@gmail.com>
The main point of it currently is to extract mac addresses. That is not
being done as MAC addresses are elsewhere.
Disable it until it becomes more feature packed and there's an actual
use for it.
All devices already have config definitions. NVMEM prevents redundant
support as well as write support.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16618
Signed-off-by: Robert Marko <robimarko@gmail.com>
Needed to avoid probe errors.
There are two partitions from 0-20000 and 80000-100000.
This is redundant-count and not regular u-boot,env
Add status = "disabled" as the u-boot env driver can't handle redundant
environments properly. As a result, fw_printenv ends up not working
right.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16618
Signed-off-by: Robert Marko <robimarko@gmail.com>
Per the comments, this is not uboot,env but the redundant forms.
Placed under fixed-partition nodes in order to add status = "disabled".
The roots are needed for u-boot envtools to use.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16618
Signed-off-by: Robert Marko <robimarko@gmail.com>
With nvmem-layout, these probe errors go away.
Add status = "disabled" as the u-boot env driver can't handle redundant
environments properly. As a result, fw_printenv ends up not working
right.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16618
Signed-off-by: Robert Marko <robimarko@gmail.com>
With nvmem-layout, these probe errors go away.
Add status = "disabled" as the u-boot env driver can't handle redundant
environments properly. As a result, fw_printenv ends up not working
right.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16618
Signed-off-by: Robert Marko <robimarko@gmail.com>
These two are redundant definitions according to dts. A value of 4 (CRC
no redundancy) makes no sense.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16618
Signed-off-by: Robert Marko <robimarko@gmail.com>
There are two redundant sections. One at 0x0 and the other at 0x80000.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16618
Signed-off-by: Robert Marko <robimarko@gmail.com>
Code was moved from 601-ucode_support.patch into ucode.{c,h},
but the patch still contained the old hunks. As a result, the patch
no longer applies.
Fix this by dropping the moved code from 601-ucode_support.patch.
Fixes: a7756346c7 ("hostapd: extend DPP ucode API with WPS M7/M8 encrypted settings handling")
Signed-off-by: Nick Hainke <vincent@systemli.org>
Add callbacks to intercept WPS M7 reception (registrar side) and M8
reception (enrollee side), allowing external code to inject extra
encrypted attributes and optionally skip credential building.
On the registrar side, the m7_rx callback receives the decrypted M7
content and can return extra data to include in M8's encrypted settings
as well as a flag to skip credential generation.
On the enrollee side, add a wps_set_m7 method to set extra encrypted
data for M7, and a m8_rx callback to handle the decrypted M8 content
externally.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
RTL930x and RTL931x basically share the same logic for mac_config().
No need to duplicate that logic in two functions and to call one
from the other.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21895
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
There is still a stray call in setup_serdes to read the current CMU
band. The only effect is that the current band is printed to the log, the
value itself isn't used for anything further. Drop this since it's not
needed.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21858
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The function 'rtpcs_931x_sds_init_leq_dfe' was taken over mostly as-is
from the SDK. After looking at what it actually does (by seeing which
register are written and how they are used elsewhere), it becomes clear
that 'init' isn't the correct term to describe what it does. It sets the
LEQ and DFE parameters to baseline values (mostly 0) and turns off auto
mode, switching to manual LEQ/DFE and forcing those baseline values.
This is rather a reset to a known state instead of an initialization.
Name the function accordingly.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21858
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add some comments to several register writes explaining what these
fields are. The information was extracted from the SDK. This allows to
understand much better what's going on there.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21858
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Currently, the CMU is configured after media specific settings have been
set. This seems to work however does not make that much sense. The
proper clock should be configured before the TX/RX channels are
configured. Thus, move the call to the CMU configuration above the media
handling.
While at it, handle the return code of the CMU config properly.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21858
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The SerDes setup for RTL931x relies on chip specifics in some cases,
Determining both usually requires some register operations. But we can
avoid to do this every time again and again since the information is
static anyway. Thus, move this to initialization for RTL93xx, only read
once and store it in the global control structure. Though not used for
RTL930x, it has the same registers and information.
While at it, give referenced defines a proper prefix.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21858
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
From the Realtek SDK we know that the chip type tell us whether a chip
is a normal chip or an engineering sample/testchip [1]. Such engineering
samples likely never reach any consumer device, only some initial
development boards. So far we haven't encountered any device with that,
thus the code paths handling this are practically dead and can hardly be
checked of they work properly. To focus on support for the devices we
actually have, drop support for such engineering samples/testchips. This
may be readded later if there's sufficient need for this.
[1] 3261cf2e61/sources/rtk-dms1250/system/drv/swcore/chip_probe.c (L345)
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21858
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Drop a register write sequence from the USXGMII setup for RTL931x in
favor of using a function that is already present. From the name, the
function initializes LEQ DFE. Though it's not yet clear what it exactly
does, this is already better then having a sequence with no explanation
somewhere in the code.
Apparently, when this code was added, the function wasn't present
but it's content was just added here as single usage.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21858
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Backport the PSE-PD (Power Sourcing Equipment - Powered Device)
framework updates from Linux 6.13 through 6.19. This brings modern
PoE (Power over Ethernet) controller support to OpenWrt, enabling
userspace control of PSE hardware via ethtool.
Key features:
- Enhanced ethtool integration for PSE status and configuration
- Power domain support with budget evaluation strategies
- PSE event reporting via netlink
- Port priority management for power budget allocation
- New Si3474 PSE controller driver
Backported commits:
v6.13 core framework and TPS23881 improvements:
- 6e56a6d47a7f net: pse-pd: Add power limit check
- 0b567519d115 net: pse-pd: tps23881: Simplify function returns
- 4c2bab507eb7 net: pse-pd: tps23881: Use helpers to calculate bit offset
- f3cb3c7bea0c net: pse-pd: tps23881: Add missing configuration register
- 3e9dbfec4998 net: pse-pd: Split ethtool_get_status
into multiple callbacks
- 4640a1f0d8f2 net: pse-pd: Remove is_enabled callback from drivers
- 7f076ce3f173 net: pse-pd: tps23881: Add power limit
and measurement features
- 10276f3e1c7e net: pse-pd: Fix missing PI of_node description
- 5385f1e1923c net: pse-pd: Clean ethtool header of PSE structures
v6.17 power domains and event support:
- fa2f0454174c net: pse-pd: Introduce attached_phydev to pse control
- fc0e6db30941 net: pse-pd: Add support for reporting events
- f5e7aecaa4ef net: pse-pd: tps23881: Add support for PSE events
- 50f8b341d268 net: pse-pd: Add support for PSE power domains
- 1176978ed851 net: ethtool: Add support for power domains index
- c394e757dedd net: pse-pd: Add helper to report hw enable status
- ffef61d6d273 net: pse-pd: Add support for budget evaluation strategies
- 359754013e6a net: pse-pd: pd692x0: Add PSE PI priority feature
- 24a4e3a05dd0 net: pse-pd: pd692x0: Add controller and manager power
- 56cfc97635e9 net: pse-pd: tps23881: Add static port priority feature
- d12b3dc10609 net: pse-pd: pd692x0: reduce stack usage
v6.18 Si3474 driver and fixes:
- 1c67f9c54cdc net: pse-pd: pd692x0: Fix power budget leak
- 7ef353879f71 net: pse-pd: pd692x0: Skip power budget when undefined
- a2317231df4b net: pse-pd: Add Si3474 PSE controller driver
v6.19 maintenance and TPS23881B support:
- 2c95a756e0cf net: pse-pd: tps23881: Fix current measurement scaling
- f197902cd21a net: pse-pd: pd692x0: Replace __free macro
- 6fa1f8b64a47 net: pse-pd: pd692x0: Separate configuration parsing
- 8f3d044b34fe net: pse-pd: pd692x0: Preserve PSE configuration
- 4d07797faaa1 net: pse-pd: tps23881: Add support for TPS23881B
Signed-off-by: Carlo Szelinsky <github@szelinsky.de>
Link: https://github.com/openwrt/openwrt/pull/21810
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add board support for the Xikestor SKS8300-12E2T2X switch.
Hardware specifications:
========================
-Realtek RTL9302C SoC, 1x MIPS-34Kc, 800 MHz
-512 MB DDR3 RAM
-32 MB SPI-NOR Flash
-12x 2.5GBASE-T Ports (RTL8224)
-2x 10GBASE-T Ports (RTL8261)
-2x 10G SPF+ Ports
-Reset Button on the front panel
-Power & SYS LED's
-UART (115200 8N1) via RJ45
Flash instruction:
==================
-Prepare TFTP server & connect to serial port
-Connect your computer to one of the RJ45 ports
-Power on and interrupt autoboot with Shift + A.
-Use Shift + Q to drop from vendor CLI to U-Boot CLI.
-Change U-Boot Bootcommand (needed for network functionality):
> setenv bootcmd 'rtk network on; boota'
> saveenv
-Start network:
> rtk network on
-Set switch IP and TFTP server IP:
> setenv ipaddr [IP-ADDRESS]
> setenv serverip [IP-ADDRESS]
-Load initramfs image from TFTP server:
> tftpboot 0x82000000 [IMAGEFILE]
-Boot with the downloaded image:
> bootm 0x82000000
-Backup the stock firmware if needed
-Perform sysupgrade with the sysupgrade image (in Luci or Terminal via scp & sysupgrade)
Back to stock firmware:
=======================
-In the Terminal enter:
> fw_setenv bootcmd 'boota'
-Write firmware with:
> sysupgrade -F [IMAGEFILE]
Signed-off-by: Michael Wagenhofer <michael@wagenhofer.de>
Link: https://github.com/openwrt/openwrt/pull/21773
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Looking at the Realtek mdio busses there are curently the following
root@OpenWrt:~# mdio
1b000000.switchcore:mdio-controller-mii
fixed-0
realtek-aux-mdio
realtek-serdes-mdio
rtldsa_mdio-0
The main mdio bus for the phys is named after the dts node it belongs
to (1b000000.switchcore:mdio-controller-mii). As it is attached to the
controller node it is even more confusing.
Align the naming to the other busses and use "realtek-mdio".
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21702
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The phy driver still uses the ancient unknown firmware file format
for the internal RTL8218B of the RTL838x. Get rid of that and
convert the initialization to the bare minimum.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21885
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The xrx200 ethernet driver falls back to a random MAC address on any
error from of_get_ethdev_address(), including -EPROBE_DEFER. When the
MAC address comes from an nvmem layout driver (such as u-boot-env on
NAND), the nvmem cell may not be available yet at first probe attempt.
Fix this by propagating EPROBE_DEFER so the driver probe is deferred
until the nvmem cell becomes available.
Tested on Zyxel P-2812HNU-F1 (NAND, u-boot-env nvmem layout).
Signed-off-by: Burak Aydos <byhexadecimal@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21861
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add a ucode API to hostapd and wpa_supplicant for external DPP frame
handling. This allows an external controller to intercept DPP frames
and handle the DPP protocol externally.
The API provides:
- RX callbacks (dpp_rx_action, dpp_rx_gas) called when DPP frames are
received, allowing external handling before internal processing
- TX methods (dpp_send_action, dpp_send_gas_resp/dpp_send_gas_req) for
transmitting DPP frames
- A ubus channel-based API (dpp_channel) for bidirectional communication
with exclusive hook registration per interface
- CCE control for hostapd (set_cce method)
The wpa_supplicant API mirrors hostapd but adapted for STA role:
- Uses tx_gas_req instead of tx_gas_resp
- GAS RX provides full frame instead of parsed query
- No CCE control (AP-only feature)
Both implementations include:
- Timeout handling with automatic channel disconnect after 3 failures
- Hook cleanup on interface removal
- Last-caller-wins semantics for hook registration
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When storing device-level data, wdev_set_data() spread the entire wdev
object into handler_data. Since handler_config.data is set from the
previous handler_data[wdev.name] before each setup, this created
exponentially growing nesting with each reload, eventually causing
"nesting too deep" JSON parse errors.
Fix by initializing cur to a simple object containing only the device
name instead of the entire wdev object.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add support for DPP (Device Provisioning Protocol) as both a primary
encryption type and as an optional addition to existing authentication.
Primary DPP mode (encryption=dpp):
- Sets WPA2 with key_mgmt=DPP
- Requires Management Frame Protection (ieee80211w=2)
- Supports dpp_connector, dpp_csign, dpp_netaccesskey options
Optional DPP mode (dpp=1 boolean on AP):
- Adds DPP to existing key management methods
- Allows AP to accept both DPP and other auth types
- Supports the same connector options
Both ucode and legacy shell implementations are updated for AP and STA
modes.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Allow callers of edit_create_destroy to pass additional named arguments
via info.named_args that get merged into the create command parameters.
Signed-off-by: John Crispin <john@phrozen.org>
When a remote peer's connection drops (device powered off, unetmsgd
crash, network failure), network_rx_cleanup_state silently removed
the remote publish/subscribe handles without notifying local
subscribers. This meant local clients had no way to detect that a
remote peer had disappeared.
Call handle_publish for each channel where a remote publish handle
is removed during connection cleanup, so local subscribers receive
the publisher change notification and can react accordingly.
Signed-off-by: John Crispin <john@phrozen.org>
