mirror of
https://git.codelinaro.org/clo/qsdk/oss/boot/u-boot-2016.git
synced 2026-02-02 04:03:17 +01:00
c786f54b9a
* 'master' of git://git.denx.de/u-boot-arm: davinci: Remove unwanted memsize.c from hawkboard's nand spl build devkit8000: Move CONFIG_SYS_TEXT_BASE out of bss da850evm: pass board revision info to kernel arch/arm/include/asm/arch-omap5/clocks.h: Fix GCC 4.2 warnings arch/arm/cpu/armv7/omap-common/clocks-common.c: Fix GCC 4.6 warnings arch/arm/cpu/armv7/omap-common/spl.c: Fix GCC 4.2 warnings MX35: flea3: changes due to hardware revision B MX: serial_mxc: cleanup removing nasty #ifdef M28: Fix OB1 bug in GPIO driver MXS: Add static annotations to dma driver apbh_dma: return error value on timeout Efika: Configure additional regulators for HDMI output mx5: Correct a warning in clock.c MC13892: Add REGMODE0 bits definitions mx51evk: Configure the pins as GPIOs prior to using gpio_get_value mx53smd: Configure the pins as GPIOs prior to using gpio_get_value mx53evk: Configure the pins as GPIOs prior to using gpio_get_value mx53ard: Configure the pins as GPIOs prior to using gpio_get_value mx53loco: Configure the pins as GPIOs prior to using gpio_get_value OMAP3: Add SPL_BOARD_INIT hook AM3517 CraneBoard: Add SPL support AM3517: Add SPL support OMAP3: Add SPL support to omap3_evm OMAP3: Add SPL support to Beagleboard OMAP3 SPL: Add identify_nand_chip function OMAP3 SPL: Rework memory initalization and devkit8000 support OMAP3: Suffix all Micron memory timing parts with their speed OMAP3: Add optimal SDRC autorefresh control values omap3: mem: Add MCFG helper macro OMAP3: Remove get_mem_type prototype OMAP3: Change mem_ok to clear again after reading back OMAP3: Add a helper function to set timings in SDRC OMAP3: Update SDRC dram_init to always call make_cs1_contiguous() omap3: mem: Comment enable_gpmc_cs_config more ARM: davici_emac: Fix condition for number of phy detects arm: printf() is not available in some SPL configurations arm, davinci: add support for am1808 based enbw_cmc board arm, davinci: move misc function in arch tree arm, board/davinci/common/misc.c: Codingstyle cleanup arm, davinci, da850: add uart1 tx rx pinmux config arm, davinci: move davinci_rtc struct to hardware.h arm, davinci: Remove duplication of pinmux configuration code arm, hawkboard: Use the pinmux configurations defined in the arch tree arm, da850evm: Use the pinmux configurations defined in the arch tree arm, da850: Add pinmux configurations to the arch tree arm, da850evm: Do pinmux configuration for EMAC together with other pinmuxes arm, hawkboard: Remove obsolete struct pinmux_config i2c_pins arm, davinci: Move pinmux functions from board to arch tree arm, arm926ejs: always do cpu critical inits omap_gpmc: use SOFTECC in SPL if it's enabled nand_spl_simple: add support for software ECC AM3517: move AM3517 specific mux defines to generic header AM35xx: add EMAC support davinci_emac: hardcode 100Mbps for AM35xx and RMII davinci_emac: fix for running with dcache enabled arm926ejs: add noop implementation for dcache ops davinci_emac: conditionally compile specific PHY support davinci_emac: use internal addresses in buffer descriptors davinci_emac: move arch-independent defines to separate header BeagleBoard: config: Really switch to ttyO2 ARM: davinci_dm6467Tevm: Fix build breakage ARM: OMAP: Remove STACKSIZE for IRQ and FIQ if unused ARM: OMAP3: Remove unused define SDRC_R_C_B ARM: OMAP3: Remove unused define CONFIG_OMAP3430 omap4: fix IO setting omap4+: streamline CONFIG_SYS_TEXT_BASE and other SDRAM addresses omap4460: add ES1.1 identification omap4: emif: fix error in driver omap: remove I2C from SPL omap4460: fix TPS initialization omap: fix cache line size for omap3/omap4 boards omap4: ttyO2 instead of ttyS2 in default bootargs omap: Improve PLL parameter calculation tool start.S: remove omap3 specific code from start.S armv7: setup vector armv7: include armv7/cpu.c in SPL build armv7: disable L2 cache in cleanup_before_linux() arm, arm926ejs: Fix clear bss loop for zero length bss PXA: Move colibri_pxa270 to board/toradex/ PXA: Flip colibri_pxa27x to pxa-common.h PXA: Introduce common configuration header for PXA PXA: Rename pxa_dram_init to pxa2xx_dram_init PXA: Squash extern pxa_dram_init() PXA: Export cpu_is_ and pxa_dram_init functions PXA: Cleanup Colibri PXA270 PXA: Replace timer driver PXA: Add cpuinfo display for PXA2xx PXA: Separate PXA2xx CPU init PXA: Rename CONFIG_PXA2[57]X to CONFIG_CPU_PXA2[57]X PXA: Unify vpac270 environment size PXA: Enable command line editing for vpac270 PXA: Adapt Voipac PXA270 to OneNAND SPL PXA: Drop Voipac PXA270 OneNAND IPL PXA: Fixup PXA25x boards after start.S update PXA: Re-add the Dcache locking as RAM for pxa250 PXA: Rework start.S to be closer to other ARMs PXA: Drop XM250 board PXA: Drop PLEB2 board PXA: Drop CRADLE board PXA: Drop CERF250 board Fix regression in SMDK6400 nand: Add common functions to linux/mtd/nand.h Ethernut 5 board support net: Armada100: Fix compilation warnings ARM: remove duplicated code for LaCie boards ARM: add support for LaCie 2Big Network v2 mvsata: fix ide_preinit for missing disks netspace_v2: Read Ethernet MAC address from EEPROM omap3evm: Add support for EFI partitions part_efi: Fix compile errors |
||
|---|---|---|
| .. | ||
| bedbug.c | ||
| cmd_ambapp.c | ||
| cmd_bdinfo.c | ||
| cmd_bedbug.c | ||
| cmd_bmp.c | ||
| cmd_boot.c | ||
| cmd_bootldr.c | ||
| cmd_bootm.c | ||
| cmd_cache.c | ||
| cmd_console.c | ||
| cmd_cplbinfo.c | ||
| cmd_cramfs.c | ||
| cmd_dataflash_mmc_mux.c | ||
| cmd_date.c | ||
| cmd_dcr.c | ||
| cmd_df.c | ||
| cmd_diag.c | ||
| cmd_display.c | ||
| cmd_dtt.c | ||
| cmd_echo.c | ||
| cmd_eeprom.c | ||
| cmd_elf.c | ||
| cmd_exit.c | ||
| cmd_ext2.c | ||
| cmd_fat.c | ||
| cmd_fdc.c | ||
| cmd_fdos.c | ||
| cmd_fdt.c | ||
| cmd_fitupd.c | ||
| cmd_flash.c | ||
| cmd_fpga.c | ||
| cmd_gpio.c | ||
| cmd_help.c | ||
| cmd_i2c.c | ||
| cmd_ide.c | ||
| cmd_immap.c | ||
| cmd_irq.c | ||
| cmd_itest.c | ||
| cmd_jffs2.c | ||
| cmd_ldrinfo.c | ||
| cmd_led.c | ||
| cmd_license.c | ||
| cmd_load.c | ||
| cmd_log.c | ||
| cmd_mac.c | ||
| cmd_md5sum.c | ||
| cmd_mdio.c | ||
| cmd_mem.c | ||
| cmd_mfsl.c | ||
| cmd_mgdisk.c | ||
| cmd_mii.c | ||
| cmd_misc.c | ||
| cmd_mmc.c | ||
| cmd_mmc_spi.c | ||
| cmd_mp.c | ||
| cmd_mtdparts.c | ||
| cmd_nand.c | ||
| cmd_net.c | ||
| cmd_nvedit.c | ||
| cmd_onenand.c | ||
| cmd_otp.c | ||
| cmd_pci.c | ||
| cmd_pcmcia.c | ||
| cmd_portio.c | ||
| cmd_pxe.c | ||
| cmd_reginfo.c | ||
| cmd_reiser.c | ||
| cmd_sata.c | ||
| cmd_scsi.c | ||
| cmd_setexpr.c | ||
| cmd_sf.c | ||
| cmd_sha1sum.c | ||
| cmd_source.c | ||
| cmd_spi.c | ||
| cmd_spibootldr.c | ||
| cmd_strings.c | ||
| cmd_terminal.c | ||
| cmd_test.c | ||
| cmd_time.c | ||
| cmd_tpm.c | ||
| cmd_tsi148.c | ||
| cmd_ubi.c | ||
| cmd_ubifs.c | ||
| cmd_universe.c | ||
| cmd_unzip.c | ||
| cmd_usb.c | ||
| cmd_version.c | ||
| cmd_ximg.c | ||
| cmd_yaffs2.c | ||
| command.c | ||
| console.c | ||
| ddr_spd.c | ||
| dlmalloc.c | ||
| dlmalloc.src | ||
| env_common.c | ||
| env_dataflash.c | ||
| env_eeprom.c | ||
| env_embedded.c | ||
| env_flash.c | ||
| env_mgdisk.c | ||
| env_mmc.c | ||
| env_nand.c | ||
| env_nowhere.c | ||
| env_nvram.c | ||
| env_onenand.c | ||
| env_sf.c | ||
| exports.c | ||
| fdt_support.c | ||
| flash.c | ||
| hush.c | ||
| hwconfig.c | ||
| image.c | ||
| iomux.c | ||
| kallsyms.c | ||
| kgdb.c | ||
| kgdb_stubs.c | ||
| lcd.c | ||
| lynxkdi.c | ||
| main.c | ||
| Makefile | ||
| memsize.c | ||
| menu.c | ||
| miiphyutil.c | ||
| modem.c | ||
| s_record.c | ||
| serial.c | ||
| stdio.c | ||
| system_map.c | ||
| update.c | ||
| usb.c | ||
| usb_kbd.c | ||
| usb_storage.c | ||
| xyzModem.c | ||