Thomas Chou 22d6c8faac cfi_flash: reset timer in flash status check ... This patch adds reset_timer() before the flash status check waiting loop. Since the timer is basically running asynchronous to the cfi code, it is possible to call get_timer(0), then only a few _SYSCLK_ cycles later an interrupt is generated. This causes timeout even though much less time has elapsed. So the timer period registers should be reset before get_timer(0) is called. There is similar usage in nand_base.c. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Stefan Roese <sr@denx.de>		2010-04-07 11:33:16 +02:00
..
nand	at91: add hwecc method for nand	2010-03-23 14:29:09 -05:00
onenand	Flex-OneNAND driver support	2009-11-13 16:56:18 -06:00
spi	sf: fix stmicro offset setup while erasing	2009-11-22 23:56:36 +01:00
ubi	UBI: Fix build problem noticed on Apollon (arm/testing repo)	2009-07-07 16:33:44 +02:00
at45.c	drivers/mtd: Move conditional compilation to Makefile	2008-08-13 01:40:42 +02:00
cfi_flash.c	cfi_flash: reset timer in flash status check	2010-04-07 11:33:16 +02:00
cfi_mtd.c	CFI: fix eraseregions numblocks	2010-02-02 08:22:00 +01:00
dataflash.c	mtd/dataflash.c: fix a problem with the last partition	2008-12-02 21:53:24 +01:00
jedec_flash.c	Support up to 7 banks for ids as specified in JEDEC JEP106Z	2009-08-26 08:58:27 +02:00
Makefile	mod change 755 => 644 for multiple files	2010-03-21 22:22:53 +01:00
mtdconcat.c	mtd: Add MTD concat support to concatenate multiple MTD NOR devices	2009-06-12 20:45:47 +02:00
mtdcore.c	mtd: Remove a printf() from add_mtd_device().	2008-11-24 11:29:53 +01:00
mtdpart.c	mtd: Update MTD infrastructure to support 64bit device size	2009-06-12 20:45:47 +02:00
mw_eeprom.c	Update i386 code (sc520_cdp)	2008-09-09 11:48:53 +02:00
spr_smi.c	mod change 755 => 644 for multiple files	2010-03-21 22:22:53 +01:00