mirror of
https://git.codelinaro.org/clo/qsdk/oss/boot/u-boot-2016.git
synced 2026-03-14 21:10:27 +01:00
2f21ce4d54
The following changes were made to sync up the DMA code between the 85xx and 86xx architectures which will make it easier to break out common 8xxx DMA code: 85xx: - Don't set STRANSINT and SPCIORDER fields in SATR register. These bits only have an affect when the SBPATMU bit is set. - Write 0xffffffff instead of 0xfffffff to clear errors in the DMA status register. We may as well clear all 32 bits of the register... 86xx: - Add CONFIG_SYS_MPC86xx_DMA_ADDR define to address DMA registers - Add clearing of errors in the DMA status register when initializing the controller - Clear the channel start bit in the DMA mode register after a transfer Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
||
|---|---|---|
| .. | ||
| commproc.c | ||
| config.mk | ||
| cpu.c | ||
| cpu_init.c | ||
| ddr-gen1.c | ||
| ddr-gen2.c | ||
| ddr-gen3.c | ||
| ether_fcc.c | ||
| fdt.c | ||
| interrupts.c | ||
| Makefile | ||
| mp.c | ||
| mp.h | ||
| mpc8536_serdes.c | ||
| pci.c | ||
| qe_io.c | ||
| release.S | ||
| resetvec.S | ||
| serial_scc.c | ||
| speed.c | ||
| start.S | ||
| tlb.c | ||
| traps.c | ||