Peng Fan 41eb8ff5ea spi: kconfig: add soft spi Kconfig entry ... Add the Kconfig entry for SOFT_SPI which uses gpio to simulate the SPI signals. We use it for accessing 74x164 on some i.MX boards. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Jagan Teki <jagan@openedev.com> Cc: Stefano Babic <sbabic@denx.de>		2017-05-18 11:24:34 +02:00
..
altera_spi.c
ath79_spi.c
atmel_dataflash_spi.c
atmel_spi.c	spi: atmel: check GPIO validity before using cs_gpios	2017-05-03 10:58:54 +05:30
atmel_spi.h
cadence_qspi.c
cadence_qspi.h
cadence_qspi_apb.c
cf_spi.c
davinci_spi.c
designware_spi.c
exynos_spi.c
fsl_dspi.c
fsl_espi.c
fsl_qspi.c	spi: fsl_qspi: Add support for single chip select	2017-03-28 09:10:12 -07:00
fsl_qspi.h
ich.c	spi: ich: Configure SPI BIOS parameters for Linux upon U-Boot exit	2017-05-17 17:13:06 +08:00
ich.h	spi: ich: Configure SPI BIOS parameters for Linux upon U-Boot exit	2017-05-17 17:13:06 +08:00
Kconfig	spi: kconfig: add soft spi Kconfig entry	2017-05-18 11:24:34 +02:00
kirkwood_spi.c
lpc32xx_ssp.c
Makefile	Blackfin: Remove	2017-04-05 13:52:01 -04:00
mpc8xxx_spi.c
mvebu_a3700_spi.c
mxc_spi.c
mxs_spi.c
omap3_spi.c	omap: spi: Drop CONFIG_OMAP3_SPI_D0_D1_SWAPPED support	2017-05-15 10:40:01 -04:00
pic32_spi.c
rk_spi.c	rockchip: spi: enable support for the rk_spi driver for the RK3399	2017-05-10 13:37:21 -06:00
rk_spi.h	rockchip: spi: rk_spi: dynamically select an module input rate	2017-05-10 13:37:21 -06:00
sandbox_spi.c
sh_qspi.c
sh_spi.c
sh_spi.h
soft_spi.c
soft_spi_legacy.c
spi-emul-uclass.c
spi-uclass.c	dm: core: Add flags parameter to device_remove()	2017-04-04 20:15:10 -06:00
spi.c
stm32_qspi.c	stm32f7: use clock driver to enable qspi controller clock	2017-05-08 11:38:41 -04:00
tegra20_sflash.c
tegra20_slink.c
tegra114_spi.c
tegra210_qspi.c
tegra_spi.h
ti_qspi.c
xilinx_spi.c
zynq_qspi.c
zynq_spi.c	zynq: spi: Honour the activation / deactivation delay	2017-05-03 11:03:04 +05:30