u-boot-2016/arch/arm
Gokul Sriram Palanisamy ebfe553da8 QCA: Crashdump data to flash
If the dump_to_flash environment variable is set with the proper
offset in u-boot, crashdump data will be stored to flash memory.
Otherwise it will be stored in tftp server.

Change-Id: I10ac1016e3dfe6a2fa11a0a67c5774b29c3df67a
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
2018-01-29 13:18:16 +05:30
..
cpu qca: psci: Added support to enable secondary cores 2018-01-02 02:20:45 -08:00
dts ipq40xx: Adding support to DK06 board 2018-01-22 01:44:31 -08:00
imx-common imx_common: check for Serial Downloader in spl_boot_device 2016-01-03 15:57:56 +01:00
include QCA: Crashdump data to flash 2018-01-29 13:18:16 +05:30
lib qca: psci: Added support to enable secondary cores 2018-01-02 02:20:45 -08:00
mach-at91 arm: at91/spl: atmel_sfr: move saic redirect to separate file 2015-11-30 22:27:55 +01:00
mach-bcm283x rpi: get rid of BCM2835_BOARD_REV_* macros 2015-12-05 18:22:35 -05:00
mach-davinci arm: Remove da830evm board 2015-09-28 10:48:23 -04:00
mach-exynos arm: exynos: clean up checkpatch issues 2015-11-02 10:38:22 +09:00
mach-highbank ARM: highbank: move SoC sources to mach-highbank 2015-02-21 08:23:51 -05:00
mach-integrator integrator: switch to DM serial port 2015-08-12 20:47:49 -04:00
mach-keystone ARM: k2g: add SD card and eMMC support 2015-10-22 14:22:25 -04:00
mach-kirkwood arm: kirkwood: add ZyXEL NSA310S device 2015-11-29 22:16:14 +01:00
mach-mvebu arm: mvebu: Configure ARP timeout and retry count 2015-11-29 16:02:44 +01:00
mach-orion5x arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD 2015-11-10 15:03:48 +01:00
mach-rockchip rockchip: Add basic support for kylin board 2015-12-13 20:51:50 -07:00
mach-s5pc1xx arm: s5pc1xx: move SoC to mach-s5pc1xx 2015-11-30 17:17:01 +09:00
mach-socfpga arm: socfpga: Unreset NAND in U-Boot 2015-12-22 21:30:02 +01:00
mach-tegra dm: tegra: Provide serial platform data for SPL 2015-12-05 18:22:38 -05:00
mach-uniphier ARM: uniphier: set DTB file name to fdt_file environment 2015-12-23 00:08:56 +09:00
mach-versatile arm: Remove versatileab board 2015-09-11 15:01:25 -04:00
mach-zynq ARM: zynq: Add default ps7_init_gpl.c/h for ZYBO 2015-12-18 13:15:57 +01:00
mvebu-common arm: mvebu: Move mvebu-common into mach-mvebu 2015-05-05 14:28:29 +02:00
thumb1/include/asm/proc-armv arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD 2015-11-10 15:03:48 +01:00
config.mk arm: Include the .got section in the binary 2015-05-14 18:49:34 -06:00
Kconfig qca:ipq806x: Added board configurations 2016-08-05 03:01:42 -07:00
Kconfig.debug arm: debug: add Kconfig entries for lowlevel debug 2014-10-26 22:23:12 +01:00
Makefile arm: s5pc1xx: move SoC to mach-s5pc1xx 2015-11-30 17:17:01 +09:00