Alex Waterman eced4626e4 NAND: Add 16bit NAND support for the NDFC ... This patch adds support for 16 bit NAND devices attached to the NDFC on ppc4xx processors. Two config entries were added: CONFIG_SYS_NDFC_16 - Setting this tells the NDFC that a 16 bit device is attached. CONFIG_SYS_NDFC_EBC0_CFG - This is for the External Bus Controller configuration register. Also, a new ndfc_read_byte() function was added which does not first convert the data to little endian. The NAND SPL was also modified to do 16bit bad block testing when a 16 bit chip is being used. Signed-off-by: Alex Waterman <awaterman@dawning.com> Signed-off-by: Scott Wood <scottwood@freescale.com>		2011-07-01 15:56:52 -05:00
..
nand	NAND: Add 16bit NAND support for the NDFC	2011-07-01 15:56:52 -05:00
onenand	Switch from archive libraries to partial linking	2010-11-17 21:02:18 +01:00
spi	sf: kick watchdog when polling	2011-06-01 22:21:42 +02:00
ubi	Switch from archive libraries to partial linking	2010-11-17 21:02:18 +01:00
at45.c	drivers/mtd: Move conditional compilation to Makefile	2008-08-13 01:40:42 +02:00
cfi_flash.c	cfi_flash: reverse geometry for newer STM parts	2011-06-29 10:05:19 +02:00
cfi_mtd.c	cfi_flash: Remove uneccessary #ifdef CONFIG_SYS_MAX_FLASH_BANKS_DETECT	2010-09-20 15:09:00 +02:00
dataflash.c	mtd/dataflash.c: fix a problem with the last partition	2008-12-02 21:53:24 +01:00
ftsmc020.c	ftsmc020: fix relocation	2011-05-12 23:43:27 +02:00
jedec_flash.c	add AM29F400BB to table of supported legacy flashs	2011-01-11 10:43:31 +01:00
Makefile	ftsmc020: move ftsmc020 static mem controller to driver/mtd	2011-04-27 19:38:10 +02:00
mtdconcat.c	mtd: Add MTD concat support to concatenate multiple MTD NOR devices	2009-06-12 20:45:47 +02:00
mtdcore.c	Followup fixes on the mtdparts spread patchset	2010-10-11 15:11:01 -05:00
mtdpart.c	nand: remove dead code and suspend/resume	2010-10-11 15:10:35 -05:00
mw_eeprom.c	Update i386 code (sc520_cdp)	2008-09-09 11:48:53 +02:00
spr_smi.c	mod change 755 => 644 for multiple files	2010-03-21 22:22:53 +01:00