roy zang 4c52783b3d General code modification for mpc7448hpc2 board support. ... 1. Add 7447A and 7448 processor support. 2. Add the following flags. CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically (such as by switch on board), this flag should be set. CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot relocates to RAM, this flag should be set. CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the system hang in exception, this flag should be set. There is a design issue for tsi108/109 pci configure read. When pci scan the slots, if there is no pci card, the tsi108/9 will cause a machine check exception for mpc7448 processor. Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>		2006-11-02 18:49:51 +08:00
..
bat_rw.c	Initial revision	2002-08-17 09:36:01 +00:00
board.c	Merge branch 'master' of http://www.denx.de/git/u-boot	2006-10-19 12:03:44 -05:00
cache.c	* Patch by Martin Winistoerfer, 23 Mar 2003	2003-03-31 17:27:09 +00:00
extable.c	General code modification for mpc7448hpc2 board support.	2006-11-02 18:49:51 +08:00
interrupts.c	* Cleanup lowboot code for MPC5200	2004-01-02 14:00:00 +00:00
kgdb.c	* Code cleanup:	2003-06-27 21:31:46 +00:00
Makefile	Move "ar" flags to config.mk to allow for silent "make -s"	2006-10-09 01:02:05 +02:00
ppcstring.S	Initial revision	2000-07-19 14:09:16 +00:00
ticks.S	Initial revision	2001-11-26 22:06:16 +00:00
time.c	* Code cleanup:	2003-06-27 21:31:46 +00:00