mirror/u-boot-2016
1
0
Fork 0
mirror of https://git.codelinaro.org/clo/qsdk/oss/boot/u-boot-2016.git synced 2026-03-12 03:58:47 +01:00
Code Issues Projects Releases Packages Wiki Activity Actions
u-boot-2016/board/gth
History
Wolfgang Denk 9d40799551 Major PCMCIA Cleanup to make code better readable and maintainable. 
Notes:
- Board-dependend code for RPXLITE and RPXCLASSIC-based boards
  placed to the drivers/rpx_pmcia.c file to avoid duplication.
  Same for TQM8xx-based boards (drivers/tqm8xx_pmcia.c).
- drivers/i82365.c has been split into two parts located at
  board/atc/ti113x.c and board/cpc45/pd67290.c (ATC and CPC45 are
  the only boards using CONFIG_82365).
- Changes were tested for clean build and *very* *few* boards.
2006-07-10 23:07:28 +02:00
..
config.mk * Code cleanup: 2003-06-27 21:31:46 +00:00
ee_access.c Initial revision 2002-08-17 09:36:01 +00:00
ee_access.h Initial revision 2002-03-08 21:31:05 +00:00
ee_dev.h Initial revision 2002-03-08 21:31:05 +00:00
flash.c Cleanup for GCC-4.x 2005-10-13 16:45:02 +02:00
gth.c Cleanup for GCC-4.x 2005-10-13 16:45:02 +02:00
Makefile Major PCMCIA Cleanup to make code better readable and maintainable. 2006-07-10 23:07:28 +02:00
pcmcia.c Major PCMCIA Cleanup to make code better readable and maintainable. 2006-07-10 23:07:28 +02:00
README * Code cleanup: 2003-06-27 21:31:46 +00:00
u-boot.lds 2005-12-12 16:06:05 +01:00

README 

Written by Thomas.Lange@corelatus.com 010805

To make a system for gth that actually works ;-)
the variable TBASE needs to be set to 0,1 or 2
depending on location where image is supposed to
be started from.
E.g. make TBASE=1

0: Start from RAM, base 0

1: Start from flash_base + 0x10070

2: Start from flash_base + 0x30070

When using 1 or 2, the image is supposed to be launched
from miniboot that boots the first U-Boot image found in
flash.
For miniboot code, description, see www.opensource.se