mirror of
https://git.codelinaro.org/clo/qsdk/oss/boot/u-boot-2016.git
synced 2026-03-14 21:10:27 +01:00
b2e6ad451b
When a high speed card is connected to mx51evk the following error is seen: U-Boot 2017.11-rc2 (Oct 18 2017 - 13:49:26 -0200) CPU: Freescale i.MX51 rev3.0 at 800 MHz Reset cause: POR Board: MX51EVK DRAM: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 *** Warning - read failed, using default environment In: serial Out: serial Err: serial Net: FEC Hit any key to stop autoboot: 0 => saveenv Saving Environment to MMC... Writing to MMC(0)... failed The root cause for the failure is the eSDHC-A001 erratum: "eSDHC-A001 : Data timeout counter (SYSCTL[DTOCV]) is not reliable for values of 0x4,0x8, and 0xC" that is listed on some PowerArchitecture chips: https://www.nxp.com/files-static/32bit/doc/errata/MPC8379ECE.pdf Even though eSDHC-A001 is not documented on the i.MX51 errata document, I have confirmed with the NXP design team that this erratum does affect i.MX51, so fix the problem by selecting SYS_FSL_ERRATUM_ESDHC_A001 at SoC level. The i.MX51 ts4800 board already selects this option, but it is better to move this selection to the i.MX51 SoC level instead. Successfully tested with a high speed SD card on a mx51evk board. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> |
||
|---|---|---|
| .. | ||
| cpu | ||
| dts | ||
| include | ||
| lib | ||
| mach-aspeed | ||
| mach-at91 | ||
| mach-bcm283x | ||
| mach-davinci | ||
| mach-exynos | ||
| mach-highbank | ||
| mach-imx | ||
| mach-integrator | ||
| mach-keystone | ||
| mach-kirkwood | ||
| mach-meson | ||
| mach-mvebu | ||
| mach-omap2 | ||
| mach-orion5x | ||
| mach-qemu | ||
| mach-rmobile | ||
| mach-rockchip | ||
| mach-s5pc1xx | ||
| mach-snapdragon | ||
| mach-socfpga | ||
| mach-sti | ||
| mach-stm32 | ||
| mach-sunxi | ||
| mach-tegra | ||
| mach-uniphier | ||
| mach-versatile | ||
| mach-zynq | ||
| thumb1/include/asm/proc-armv | ||
| config.mk | ||
| Kconfig | ||
| Kconfig.debug | ||
| Makefile | ||