mirror of
https://git.codelinaro.org/clo/qsdk/oss/boot/u-boot-2016.git
synced 2026-02-09 05:21:03 +01:00
f2863ff3f4
The bmode command forces the SoC to use a specific boot device by writing its boot mode into SRC_GPR9, and notifying the SoC of the change using SRC_GPR10[28] bit: if the bit is on, bootROM uses the value in SRC_GPR9 instead of SRC_SMBR1 to determine the boot device. SPL on the other hand is oblivious to this distinction, so once the bootROM loads SPL from the device configured in SRC_GPR10, SPL will attempt to load U-Boot from the device configured in SRC_SMBR1, which is not updated by the bootROM to the value in SRC_GPR9. The result is that the selected boot device is not used across all the boot stages. Update spl_boot_device() to look at gpr9 when necessary. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Stefano Babic <sbabic@denx.de> Cc: Troy Kisky <troy.kisky@boundarydevices.com> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Heiko Schocher <hs@denx.de> |
||
|---|---|---|
| .. | ||
| arm720t | ||
| arm920t | ||
| arm926ejs | ||
| arm946es | ||
| arm1136 | ||
| arm1176 | ||
| arm_intcm | ||
| armv7 | ||
| armv8 | ||
| at91-common | ||
| pxa | ||
| sa1100 | ||
| tegra-common | ||
| tegra20-common | ||
| tegra30-common | ||
| tegra114-common | ||
| tegra124-common | ||
| Makefile | ||
| u-boot-spl.lds | ||
| u-boot.lds | ||