Tom Rix 23b80982a0 Add support for Eukrea CPU9260/CPU9G20 SBC ... these boards are built around Atmel's AT91SAM9260/9G20 and have up to 64MB of NOR flash, up to 128MB of SDRAM, up to 2GB of NAND and include a 10/100 Ethernet PHY in RMII mode. Signed-off-by: Eric Benard <eric@eukrea.com> Signed-off-by: Tom Rix <Tom.Rix@windriver.com>		2009-10-13 06:17:35 -05:00
..
at91cap9_devices.c	at91: Add CAN init function	2009-07-06 21:52:43 +02:00
at91sam9m10g45_devices.c	at91: Introduction of at91sam9g45 SOC.	2009-07-12 17:43:34 +02:00
at91sam9rl_devices.c	at91: regroup IP hw init in one file per soc	2009-06-12 20:39:51 +02:00
at91sam9260_devices.c	Add support for the Calao SBC35-A9G20 board	2009-09-01 22:13:37 +02:00
at91sam9261_devices.c	at91: regroup IP hw init in one file per soc	2009-06-12 20:39:51 +02:00
at91sam9263_devices.c	at91: Add CAN init function	2009-07-06 21:52:43 +02:00
clock.c	at91: Introduction of at91sam9g45 SOC.	2009-07-12 17:43:34 +02:00
config.mk	arm: unify linker script	2009-06-12 20:39:52 +02:00
cpu.c	at91: move cpu info print to cpu	2009-06-12 20:45:46 +02:00
led.c	at91sam9/at91cap: move common led management to cpu	2009-03-22 13:22:08 +01:00
lowlevel_init.S	Add support for Eukrea CPU9260/CPU9G20 SBC	2009-10-13 06:17:35 -05:00
Makefile	at91: Introduction of at91sam9g10 SOC.	2009-07-12 17:56:11 +02:00
reset.c	at91: extract reset from timer	2009-06-12 20:39:53 +02:00
timer.c	at91: extract reset from timer	2009-06-12 20:39:53 +02:00