mirror of
https://git.codelinaro.org/clo/qsdk/oss/boot/u-boot-2016.git
synced 2026-03-14 21:10:27 +01:00
15a2acdf85
It is confusing that mdio commands work and report phy id as decimal value when mii is working with hex values. For example: ZynqMP> mdio list gem: 21 - TI DP83867 <--> ethernet@ff0e0000 ZynqMP> mdio read ethernet@ff0e0000 0 Reading from bus gem PHY at address 21: 0 - 0x1140 ZynqMP> mii dump 21 0 Incorrect PHY address. Range should be 0-31 ... ZynqMP> mii dump 15 0. (1140) -- PHY control register -- (8000:0000) 0.15 = 0 reset U-Boot normally takes hex values that's why this patch is changing mdio command to handle hex instead of changing mii command to handle decimal values. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com> |
||
|---|---|---|
| .. | ||
| adc | ||
| bios_emulator | ||
| block | ||
| bootcount | ||
| clk | ||
| core | ||
| cpu | ||
| crypto | ||
| ddr | ||
| demo | ||
| dfu | ||
| dma | ||
| fpga | ||
| gpio | ||
| hwmon | ||
| i2c | ||
| input | ||
| led | ||
| mailbox | ||
| memory | ||
| misc | ||
| mmc | ||
| mtd | ||
| net | ||
| pch | ||
| pci | ||
| pcmcia | ||
| phy/marvell | ||
| pinctrl | ||
| power | ||
| pwm | ||
| qe | ||
| ram | ||
| remoteproc | ||
| reset | ||
| rtc | ||
| serial | ||
| soc | ||
| sound | ||
| spi | ||
| spmi | ||
| sysreset | ||
| thermal | ||
| timer | ||
| tpm | ||
| twserial | ||
| usb | ||
| video | ||
| watchdog | ||
| Kconfig | ||
| Makefile | ||