Heiko Schocher a35ea8070c mtd, nand: move some printfs to debug output. ... current U-Boot shows on startup (for example on the enbw_cmc board) the following printfs from the nand subsystem: Flash: 2 MiB NAND: Bad block table found at page 65472, version 0x01 Bad block table found at page 65408, version 0x01 nand_read_bbt: Bad block at 0x000002980000 nand_read_bbt: Bad block at 0x000003240000 128 MiB MMC: davinci: 0 remove them to debug output, so it shows with this patch: Flash: 2 MiB NAND: 128 MiB MMC: davinci: 0 Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Scott Wood <scottwood@freescale.com> Signed-off-by: Scott Wood <scott@tyr.buserror.net>		2012-05-18 18:11:37 -05:00
..
nand	mtd, nand: move some printfs to debug output.	2012-05-18 18:11:37 -05:00
onenand	linux/compat.h: rename from linux/mtd/compat.h	2012-04-30 16:54:51 +02:00
spi	sf: eeprom_m95xxx: set a sane default timeout	2012-02-12 15:18:28 -05:00
ubi	UBI: init eba tables before wl when attaching a device	2011-10-12 11:36:05 +02:00
at45.c	drivers/mtd: Move conditional compilation to Makefile	2008-08-13 01:40:42 +02:00
cfi_flash.c	cfi: fix the incomplete erased status check in buffer write	2012-03-21 16:25:33 +01:00
cfi_mtd.c	CFI: fix warning: variable ... set but not used	2011-10-09 23:24:49 +02:00
dataflash.c	drivers/mtd/dataflash.c: Fix GCC 4.6 warning	2011-11-16 21:28:47 +01:00
ftsmc020.c	ftsmc020: fix relocation	2011-05-12 23:43:27 +02:00
jedec_flash.c	add STM29F400BB to table of supported legacy flashs	2012-02-09 09:45:53 +01:00
Makefile	ftsmc020: move ftsmc020 static mem controller to driver/mtd	2011-04-27 19:38:10 +02:00
mtdconcat.c	linux/compat.h: rename from linux/mtd/compat.h	2012-04-30 16:54:51 +02:00
mtdcore.c	linux/compat.h: rename from linux/mtd/compat.h	2012-04-30 16:54:51 +02:00
mtdpart.c	linux/compat.h: rename from linux/mtd/compat.h	2012-04-30 16:54:51 +02:00
mw_eeprom.c	Update i386 code (sc520_cdp)	2008-09-09 11:48:53 +02:00
spr_smi.c	drivers/mtd/spr_smi.c: Fix build warning	2012-04-14 23:03:13 +02:00