mirror/u-boot-2016
1
0
Fork 0
mirror of https://git.codelinaro.org/clo/qsdk/oss/boot/u-boot-2016.git synced 2026-02-23 20:49:56 +01:00
Code Issues Projects Releases Packages Wiki Activity Actions
u-boot-2016/board/ti/dra7xx
History
Dan Murphy 39fbac91e1 board: ti: DRA7: Add DP83867 TI phy for rev c 
Enable the TI DP83867 Giga bit phy on the
dra7 rev c board.  The rx and tx internal
delays are need for this board so the usage
of RGMII_ID is required.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-04-01 17:18:07 -04:00
..
evm.c board: ti: DRA7: Add DP83867 TI phy for rev c 2016-04-01 17:18:07 -04:00
Kconfig ARM: DRA7: Enable EEPROM support 2016-03-14 19:18:50 -04:00
MAINTAINERS board/ti: Update MAINTAINERS entries with more boards 2015-11-10 09:20:27 -05:00
Makefile board: ti: convert makefiles to Kbuild style 2013-10-31 13:26:44 -04:00
mux_data.h board: ti: DRA7: Add DRA72-rev C evm pinmux 2016-03-27 09:12:16 -04:00
README mmc: Add 'mmc rst-function' sub-command 2014-04-02 13:02:58 +03:00

README 

Summary
=======

This document covers various features of the 'dra7xx_evm' build and some
related uses.

eMMC boot partition use
=======================

It is possible, depending on SYSBOOT configuration to boot from the eMMC
boot partitions using (name depending on documentation referenced)
Alternative Boot operation mode or Boot Sequence Option 1/2.  In this
example we load MLO and u-boot.img from the build into DDR and then use
'mmc bootbus' to set the required rate (see TRM) and 'mmc partconfig' to
set boot0 as the boot device.
U-Boot # setenv autoload no
U-Boot # usb start
U-Boot # dhcp
U-Boot # mmc dev 1 1
U-Boot # tftp ${loadaddr} dra7xx/MLO
U-Boot # mmc write ${loadaddr} 0 100
U-Boot # tftp ${loadaddr} dra7xx/u-boot.img
U-Boot # mmc write ${loadaddr} 300 400
U-Boot # mmc bootbus 1 2 0 2
U-Boot # mmc partconf 1 1 1 0
U-Boot # mmc rst-function 1 1