Iain Paton 99deda1dff sunxi: axp209: fix incorrect limits on ldo3 ... board/sunxi/board.c tries to set ldo3 to 2.8v however drivers/power/axp209.c contains an incorrect limit on ldo3 of 2.275v The origin of the incorrect limit seems likely due to some inconsistencies in the axp209 datasheet. ldo3 is described with different limits in different sections. register 0x29 uses 7 bits for voltage configuration while the 2.275v limit would apply if only 6 bits were used. Probably this is a cut&paste error from register 0x23 The linux kernel driver has the correct limit and operation up to the 2.8v required by my board has been physically verified with a multimeter. Signed-off-by: Iain Paton <ipaton0@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>		2015-03-26 13:17:46 +01:00
..
bios_emulator	bios_emulator: Add some VESA interface debugging	2015-01-23 17:24:16 -07:00
block	x86: ahci: Make sure interface is not busy after enabling the port	2015-01-23 17:24:53 -07:00
bootcount	qe: move immap_qe.h from arch directory into common directory	2014-07-22 16:25:54 -07:00
core	kconfig: remove unneeded dependency on !SPL_BUILD	2015-02-24 17:06:27 -05:00
crypto	Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx	2015-03-05 20:50:30 -05:00
ddr	driver/ddr/fsl: Add sync of refresh	2015-02-24 13:09:42 -08:00
demo	dm: Add Kconfig for driver/demo	2015-02-12 10:35:33 -07:00
dfu	dfu: mmc: file buffer: remove static allocation	2015-03-09 11:13:28 -04:00
dma	dma: keystone_nav: remove spurious qm_cfg verification	2014-11-06 11:04:39 -05:00
fpga	fpga: xilinx: Show fpga info if defined	2015-01-21 10:25:43 +01:00
gpio	dm: tegra: Enable driver model in SPL and adjust the GPIO driver	2015-03-04 14:55:04 -05:00
hwmon	kconfig: add blank Kconfig files	2014-09-24 18:30:28 -04:00
i2c	i2c: mvtwsi: Fix problem with baud rate calculation	2015-03-18 09:48:42 +01:00
input	dm: cros_ec: Convert to Kconfig	2015-02-19 06:19:18 -07:00
memory	ARM: keystone: aemif: move aemif driver to drivers/memory/ti-aemif.c	2014-06-19 17:53:58 -04:00
misc	fsl_sec_mon: Add driver for Security Monitor block of Freescale	2015-03-05 12:04:59 -08:00
mmc	mv_sdhci: fix warnings on 64-bit builds	2015-03-18 09:56:17 +02:00
mtd	omap: gpmc: 'nandecc sw' can use HAM1 or BCH8	2015-03-05 20:49:43 -05:00
net	Net: macb: reset GBE bit when fallback checking	2015-03-18 23:36:09 +01:00
pci	driver/pci: add Layerscape PCIe driver	2015-02-24 13:10:50 -08:00
pcmcia	powerpc: mpc824x: remove MPC824X cpu support	2015-01-05 12:08:55 -05:00
power	sunxi: axp209: fix incorrect limits on ldo3	2015-03-26 13:17:46 +01:00
pwm	pwm, imx6: add support for pwm modul on imx6	2014-07-23 12:25:42 +02:00
qe	qe/deep-sleep: modify qe deep-sleep for generic board	2014-12-15 09:16:49 -08:00
rtc	remove unnecessary version.h includes	2015-03-24 10:50:50 -04:00
serial	ARM: UniPhier: adjust device trees for business transfer	2015-03-15 13:37:00 +09:00
soc	soc: keystone_serdes: generalize configuration mechanism	2014-10-23 11:27:28 -04:00
sound	kconfig: add blank Kconfig files	2014-09-24 18:30:28 -04:00
spi	dm: Expand and complete Kconfig in drivers/	2015-02-12 10:35:33 -07:00
thermal	dm: Expand and complete Kconfig in drivers/	2015-02-12 10:35:33 -07:00
tpm	Replace <compiler.h> with <linux/compiler.h>	2014-12-08 09:35:46 -05:00
twserial	drivers: convert makefiles to Kbuild style	2013-10-31 13:26:01 -04:00
usb	sunxi: musb: Return early on VBUS GPIO error instead of on a positive value	2015-03-21 13:51:27 +01:00
video	remove unnecessary version.h includes	2015-03-24 10:50:50 -04:00
watchdog	ARM: remove tnetv107x board support	2015-02-24 17:07:24 -05:00
Kconfig	dm: Expand and complete Kconfig in drivers/	2015-02-12 10:35:33 -07:00
Makefile	Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq	2014-11-26 11:23:26 -05:00