Heiko Schocher 780f13a9e1 hwmon: do not init sensors on startup ... The U-Boot Design Principles[1] clearly say: Initialize devices only when they are needed within U-Boot, i.e. don't initialize the Ethernet interface(s) unless U-Boot performs a download over Ethernet; don't initialize any IDE or USB devices unless U-Boot actually tries to load files from these, etc. (and don't forget to shut down these devices after using them - otherwise nasty things may happen when you try to boot your OS). So, do not initialize and read the sensors on startup. Signed-off-by: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> cc: Holger Brunck <holger.brunck@keymile.com>		2011-08-04 23:30:38 +02:00
..
bat_rw.c	Move arch/ppc to arch/powerpc	2010-04-21 23:42:38 +02:00
board.c	hwmon: do not init sensors on startup	2011-08-04 23:30:38 +02:00
bootcount.c	mpc832x: add support for the mpc8321 based suvd3 board	2011-04-30 00:44:29 +02:00
bootm.c	powerpc/85xx: verify the device tree before booting Linux	2011-07-29 08:53:39 -05:00
cache.c	Move arch/ppc to arch/powerpc	2010-04-21 23:42:38 +02:00
extable.c	Move arch/ppc to arch/powerpc	2010-04-21 23:42:38 +02:00
interrupts.c	Timer: Remove reset_timer() for non-Nios2 arches	2011-07-26 14:53:30 +02:00
kgdb.c	powerpc: fix register usage in some inline assembly code	2010-12-17 21:18:08 +01:00
Makefile	Switch from archive libraries to partial linking	2010-11-17 21:02:18 +01:00
memcpy_mpc5200.c	MPC512x: workaround data corruption for unaligned local bus accesses	2010-06-29 14:41:37 +02:00
ppccache.S	Move arch/ppc to arch/powerpc	2010-04-21 23:42:38 +02:00
ppcstring.S	Move arch/ppc to arch/powerpc	2010-04-21 23:42:38 +02:00
reloc.S	Move arch/ppc to arch/powerpc	2010-04-21 23:42:38 +02:00
ticks.S	Move arch/ppc to arch/powerpc	2010-04-21 23:42:38 +02:00
time.c	powerpc: fix register usage in some inline assembly code	2010-12-17 21:18:08 +01:00