Andreas Huber 91a3c14cd0 ppc, mgcoge: add DIP switch detection ... This reads the DIP switch on mgcoge. The DIP switch is connected to the BFTICU (0x40000089) FPGA. If the DIP switch is set the environment variable 'actual_bank' is set to 0 and starts the SW in bank0. Signed-off-by: Andreas Huber <andreas.huber@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com>		2011-04-11 22:41:37 +02:00
..
manroland
a4m072.h
a320evb.h	arm: a320evb: fixes for relocation support	2011-02-02 00:54:45 +01:00
A3000.h
acadia.h
actux1.h
actux2.h
actux3.h
actux4.h
ADCIOP.h
Adder.h
AdderUSB.h
ADS860.h
aev.h
afeb9260.h
Alaska8220.h
alpr.h
am3517_evm.h
amcc-common.h
AMX860.h
ap325rxa.h	sh: Remove config.mk for ap325rxa board	2011-02-02 16:18:44 +09:00
AP1000.h	Move LDSCRIPT definitions to board config files.	2010-12-09 10:27:41 +01:00
APC405.h
apollon.h
AR405.h
aria.h
armadillo.h
ASH405.h
aspenite.h	mv: seperate kirkwood and armada from common setting	2011-02-21 08:30:55 +01:00
assabet.h
astro_mcf5373l.h
at91cap9adk.h
at91rm9200dk.h
at91rm9200ek.h	arm920t/at91/timer: replace bss variables by gd	2010-12-07 22:08:07 +01:00
at91sam9m10g45ek.h
at91sam9rlek.h
at91sam9260ek.h
at91sam9261ek.h
at91sam9263ek.h
atc.h
atngw100.h
atstk1002.h
atstk1003.h
atstk1004.h
atstk1006.h
B2.h
BAB7xx.h
balloon3.h
bamboo.h
BC3450.h
bct-brettl2.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
bf506f-ezkit.h	Blackfin: adi boards: enable CONFIG_MONITOR_IS_IN_RAM	2011-04-08 00:44:27 -04:00
bf518f-ezbrd.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
bf525-ucr2.h	Blackfin: bf525-ucr2: new board port	2011-04-08 00:44:26 -04:00
bf526-ezbrd.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
bf527-ad7160-eval.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
bf527-ezkit.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
bf527-sdp.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
bf533-ezkit.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
bf533-stamp.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
bf537-minotaur.h	Blackfin: bf537-minotaur/bf537-srv1: undefine nfs when net is disabled	2011-04-08 00:44:26 -04:00
bf537-pnav.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
bf537-srv1.h	Blackfin: bf537-minotaur/bf537-srv1: undefine nfs when net is disabled	2011-04-08 00:44:26 -04:00
bf537-stamp.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
bf538f-ezkit.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
bf548-ezkit.h	Blackfin: bf548-ezkit: move env sector	2011-04-08 00:44:27 -04:00
bf561-acvilon.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
bf561-ezkit.h	Blackfin: bf561-ezkit/ibf-dsp561: invert env offset/addr logic	2011-04-08 00:44:26 -04:00
bfin_adi_common.h	Blackfin: adi boards: enable CONFIG_MONITOR_IS_IN_RAM	2011-04-08 00:44:27 -04:00
blackstamp.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
blackvme.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
bluestone.h
BMW.h
bubinga.h
c2mon.h
ca9x4_ct_vxp.h
CANBT.h
canmb.h
canyonlands.h
CATcenter.h
cerf250.h
charon.h	mpc52xx, charon: change mtd default partitions	2010-12-17 20:15:12 +01:00
cm-bf527.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
cm-bf533.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
cm-bf537e.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
cm-bf537u.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
cm-bf548.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
cm-bf561.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
cm41xx.h
cm4008.h
cm5200.h
cm_t35.h	OMAP3: add CM-T35 board	2011-02-02 00:54:43 +01:00
cmc_pu2.h
cmi_mpc5xx.h
CMS700.h
cobra5272.h
cogent_common.h
cogent_mpc8xx.h
cogent_mpc8260.h
colibri_pxa270.h
corenet_ds.h	powerpc/85xx: Add PBL boot from SPI flash support on P4080DS	2011-04-10 11:17:55 -05:00
CPC45.h
CPCI2DP.h
CPCI405.h
CPCI405AB.h
CPCI405DT.h
CPCI750.h
CPCI4052.h
cpci5200.h
CPCIISER4.h
CPU86.h
CPU87.h
cpu9260.h
cpuat91.h
cradle.h
CRAYL1.h
csb226.h
csb272.h
csb472.h
csb637.h
CU824.h
da830evm.h
da850evm.h	da850: Add RMII support for EMAC	2010-12-09 10:24:12 +01:00
DASA_SIM.h	Move LDSCRIPT definitions to board config files.	2010-12-09 10:27:41 +01:00
davinci_dm355evm.h	DaVinci DM355: Adding MMC/SD support for DM355 EVM	2011-02-02 00:54:44 +01:00
davinci_dm355leopard.h
davinci_dm365evm.h	DaVinci DM365: Adding MMC/SD support for DM365 EVM	2011-02-02 00:54:44 +01:00
davinci_dm6467evm.h	DaVinci DM6467: Enhance board Support	2011-02-02 00:54:44 +01:00
davinci_dvevm.h	DaVinci DM6446: Config Update	2010-12-11 10:47:30 -05:00
davinci_schmoogie.h	DaVinci Schmoogie: Add ARM Relocation Support	2010-12-17 10:07:40 +01:00
davinci_sffsdr.h	DaVinci sffsdr: Add ARM Relocation Support	2010-12-17 10:07:35 +01:00
davinci_sonata.h	DaVinci Sonata: Fix Build Error	2011-02-02 00:54:44 +01:00
DB64360.h
DB64460.h
dbau1x00.h
debris.h
devkit8000.h
digsy_mtc.h	mpc52xx, digsy_mtc_rev5: Fix Linux crash, if no Flash in bank 2	2011-03-21 22:51:27 +01:00
dkb.h	Pantheon: Add Board Support for Marvell dkb board	2011-02-21 08:30:55 +01:00
dlvision-10g.h	ppc4xx: Add DLVision-10G board support	2011-02-07 11:13:16 +01:00
dlvision.h
dnp1110.h
dnp5370.h	Blackfin: dnp5370: new board port	2011-04-08 00:44:26 -04:00
dockstar.h
DP405.h
DU405.h
DU440.h
ea20.h	Davinci: add support for the ea20 board	2010-12-09 10:24:12 +01:00
EB+MCF-EV123.h
eb_cpux9k2.h
ebony.h
edb93xx.h
edminiv2.h
efikamx.h	iMX5: EfikaMX: Preliminary board support	2011-02-02 00:54:42 +01:00
ELPPC.h
ELPT860.h
eNET.h	eNET: Move initial Global Data into CAR	2011-02-12 15:12:14 +11:00
ep82xxm.h
EP88x.h
ep7312.h
ep8248.h
ep8260.h
espt.h	sh: Remove config.mk for espt board	2011-02-02 16:18:45 +09:00
ESTEEM192E.h
ETX094.h
evb4510.h
EVB64260.h
eXalion.h
EXBITGEN.h
FADS823.h
FADS850SAR.h
FADS860T.h
favr-32-ezkit.h
FLAGADM.h
FPS850L.h
FPS860L.h
fx12mm.h
G2000.h
galaxy5200.h
gcplus.h
gdppc440etx.h
GEN860T.h
GENIETV.h
gr_cpci_ax2000.h
gr_ep2s60.h
gr_xc3s_1500.h
grsim.h
grsim_leon2.h
gth2.h
guruplug.h
gw8260.h
h2_p2_dbg_board.h
hammerhead.h
harmony.h	arm: Tegra2: Add support for NVIDIA Harmony board	2011-02-21 08:30:55 +01:00
hawkboard.h	Add board support for hawkboard	2010-12-09 10:24:11 +01:00
hcu4.h
hcu5.h
hermes.h
HH405.h
HIDDEN_DRAGON.h
hmi1001.h
HUB405.h
hymod.h
IAD210.h
ibf-dsp561.h	Blackfin: bf561-ezkit/ibf-dsp561: invert env offset/addr logic	2011-04-08 00:44:26 -04:00
IceCube.h
icon.h
ICU862.h
idmr.h
IDS8247.h
igep0020.h
igep0030.h
impa7.h
imx27lite-common.h
imx27lite.h
imx31_litekit.h
imx31_phycore.h
incaip.h	MIPS: Move Inca-IP targets to boards.cfg	2011-02-05 22:45:41 +09:00
inka4x0.h	Move LDSCRIPT definitions to board config files.	2010-12-09 10:27:41 +01:00
innokom.h
integratorap.h
integratorcp.h
intip.h
io.h	ppc4xx: Add DLVision-10G board support	2011-02-07 11:13:16 +01:00
iocon.h	ppc4xx: Add DLVision-10G board support	2011-02-07 11:13:16 +01:00
ip04.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
IP860.h
ipek01.h
IPHASE4539.h
ISPAN.h
IVML24.h
IVMS8.h
ixdp425.h
ixdpg425.h
jadecpu.h
jornada.h
JSE.h
jupiter.h
KAREF.h
katmai.h
kb9202.h
keymile-common.h
kilauea.h
km_arm.h
kmeter1.h
korat.h
KUP4K.h
KUP4X.h
kvme080.h
LANTEC.h
lart.h
linkstation.h
lpc2292sodimm.h
lpd7a400-10.h
lpd7a400.h
lpd7a404-10.h
lpd7a404.h
luan.h
lubbock.h
lwmon.h
lwmon5.h	ppc4xx: Remove PCI support from lwmon5	2011-01-10 12:50:14 +01:00
m501sk.h
M5208EVBE.h
M5235EVB.h
M5249EVB.h
M5253DEMO.h
M5253EVBE.h
M5271EVB.h
M5272C3.h
M5275EVB.h
M5282EVB.h
M5329EVB.h
M5373EVB.h
M5475EVB.h
M5485EVB.h
M52277EVB.h
M53017EVB.h
M54451EVB.h
M54455EVB.h
magnesium.h
makalu.h
MBX.h
MBX860T.h
mcc200.h
mcu25.h
mecp5123.h
mecp5200.h
meesc.h
METROBOX.h
mgcoge.h	ppc, mgcoge: add DIP switch detection	2011-04-11 22:41:37 +02:00
MHPC.h
microblaze-generic.h	microblaze: Fix bd_info pointer	2011-01-10 08:52:32 +01:00
MigoR.h	sh: Remove config.mk for MigoR board	2011-02-02 16:18:44 +09:00
mimc200.h
MIP405.h
ML2.h	Move LDSCRIPT definitions to board config files.	2010-12-09 10:27:41 +01:00
ml507.h
modnet50.h
motionpro.h
MOUSSE.h	Move LDSCRIPT definitions to board config files.	2010-12-09 10:27:41 +01:00
mp2usb.h
MPC86xADS.h
MPC832XEMDS.h
MPC837XEMDS.h	fsl_esdhc: Fix esdhc disabled problem on some platforms	2011-01-14 01:32:19 -06:00
MPC837XERDB.h	fsl_esdhc: Fix esdhc disabled problem on some platforms	2011-01-14 01:32:19 -06:00
MPC885ADS.h
mpc5121-common.h
mpc5121ads.h	powerpc: clean up DIU macro definitions for Freescale reference boards	2011-04-04 22:32:18 -05:00
mpc7448hpc2.h
MPC8260ADS.h
MPC8266ADS.h
mpc8308_p1m.h
MPC8308RDB.h
MPC8313ERDB.h
MPC8315ERDB.h
MPC8323ERDB.h
MPC8349EMDS.h
MPC8349ITX.h
MPC8360EMDS.h
MPC8360ERDK.h
MPC8536DS.h	powerpc/85xx: rename NAND prefixes to CONFIG_SYS	2011-04-08 02:50:57 -05:00
MPC8540ADS.h	powerpc/85xx: Bump up the CONFIG_SYS_BOOTM_LEN to 16M on FSL 85xx boards	2011-01-14 01:32:22 -06:00
MPC8541CDS.h	powerpc/85xx: Bump up the CONFIG_SYS_BOOTM_LEN to 16M on FSL 85xx boards	2011-01-14 01:32:22 -06:00
MPC8544DS.h	powerpc/85xx: Bump up the CONFIG_SYS_BOOTM_LEN to 16M on FSL 85xx boards	2011-01-14 01:32:22 -06:00
MPC8548CDS.h	powerpc/85xx: Bump up the CONFIG_SYS_BOOTM_LEN to 16M on FSL 85xx boards	2011-01-14 01:32:22 -06:00
MPC8555CDS.h	powerpc/85xx: Bump up the CONFIG_SYS_BOOTM_LEN to 16M on FSL 85xx boards	2011-01-14 01:32:22 -06:00
MPC8560ADS.h	powerpc/85xx: Bump up the CONFIG_SYS_BOOTM_LEN to 16M on FSL 85xx boards	2011-01-14 01:32:22 -06:00
MPC8568MDS.h	powerpc/85xx: Bump up the CONFIG_SYS_BOOTM_LEN to 16M on FSL 85xx boards	2011-01-14 01:32:22 -06:00
MPC8569MDS.h	powerpc/85xx: rename NAND prefixes to CONFIG_SYS	2011-04-08 02:50:57 -05:00
MPC8572DS.h	powerpc/85xx: rename NAND prefixes to CONFIG_SYS	2011-04-08 02:50:57 -05:00
MPC8610HPCD.h	powerpc: clean up DIU macro definitions for Freescale reference boards	2011-04-04 22:32:18 -05:00
MPC8641HPCN.h	powerpc/86xx: Convert MPC8641HPCN to use common SRIO init code	2011-01-14 01:32:21 -06:00
mpq101.h	mpq101: initial support for Mercury Computer Systems MPQ101 board	2011-01-26 23:44:00 -06:00
mpr2.h	sh: Remove config.mk for mpr2 board	2011-02-02 16:18:45 +09:00
ms7720se.h	sh: Remove config.mk for ms7720se board	2011-02-02 16:18:45 +09:00
ms7722se.h	sh: Remove config.mk for ms7722se board	2011-02-02 16:18:45 +09:00
ms7750se.h	sh: Remove config.mk for ms7750se board	2011-02-02 16:18:45 +09:00
muas3001.h
mucmc52.h
munices.h
MUSENKI.h
mv-common.h	mv: seperate kirkwood and armada from common setting	2011-02-21 08:30:55 +01:00
mv88f6281gtw_ge.h
MVBC_P.h
MVBLM7.h
MVBLUE.h
MVS1.h
MVSMR.h	Move LDSCRIPT definitions to board config files.	2010-12-09 10:27:41 +01:00
mx1ads.h
mx1fs2.h
mx31ads.h
mx31pdk.h	mx31pdk: Make the full boot log visible	2011-02-21 08:30:54 +01:00
mx35pdk.h	Add support for Freescale's mx35pdk board.	2011-02-02 00:54:43 +01:00
mx51evk.h	MX5: Add initial support for MX53 processor	2011-02-02 00:54:41 +01:00
mx53evk.h	MX5:MX53: add initial support for MX53EVK board	2011-02-02 00:54:42 +01:00
neo.h
NETPHONE.h
netstal-common.h
netstar.h
NETTA.h
NETTA2.h
NETVIA.h
nhk8815.h
nios2-generic.h
ns9750dev.h
NSCU.h
NX823.h
o2dnt.h
ocotea.h
OCRTC.h
omap3_beagle.h	OMAP3: SPI driver	2010-12-11 11:01:00 -05:00
omap3_evm.h
omap3_overo.h
omap3_pandora.h
omap3_sdp3430.h
omap3_zoom1.h
omap3_zoom2.h
omap4_panda.h
omap4_sdp4430.h	Merge branch 'master' of ../master into next	2010-12-16 23:00:53 +01:00
omap730.h
omap730p2.h
omap1510.h
omap1510inn.h
omap1610h2.h
omap1610inn.h
omap2420h4.h
omap5912osk.h
openrd_base.h
ORSG.h
otc570.h
OXC.h
P1_P2_RDB.h	powerpc/85xx: rename NAND prefixes to CONFIG_SYS	2011-04-08 02:50:57 -05:00
P3G4.h
p3mx.h
p3p440.h
P1022DS.h	powerpc/85xx: Update default hwconfig on P1022DS	2011-04-10 11:17:55 -05:00
P2020DS.h	powerpc/85xx: rename NAND prefixes to CONFIG_SYS	2011-04-08 02:50:57 -05:00
P4080DS.h	powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers	2011-01-19 22:58:23 -06:00
palmld.h
palmtc.h
PATI.h
pb1x00.h
PCI405.h
PCI5441.h
PCIPPC2.h
PCIPPC6.h
pcm030.h
pcs440ep.h
pdm360ng.h
pdnb3.h
pf5200.h
PIP405.h
PK1C20.h
pleb2.h
PLU405.h
pm9g45.h	pm9g45: enable cache command	2010-12-16 22:45:00 +01:00
PM520.h
PM826.h
PM828.h
pm9261.h	pm9261: enable cache command	2010-12-16 22:46:06 +01:00
pm9263.h	pm9263: enable cache command	2010-12-16 22:45:30 +01:00
PMC405.h
PMC405DE.h
PMC440.h
PN62.h
PPChameleonEVB.h
ppmc7xx.h
ppmc8260.h
pxa255_idp.h
qemu-mips.h
qong.h
QS823.h
QS850.h
QS860T.h
quad100hd.h
quantum.h
r2dplus.h	sh: Remove config.mk for r2dplus board	2011-02-02 16:18:44 +09:00
R360MPI.h
r7780mp.h	sh: Remove config.mk for r7780mp board	2011-02-02 16:18:44 +09:00
Rattler.h
RBC823.h
rd6281a.h
redwood.h
rmu.h
RPXClassic.h
RPXlite.h
RPXlite_DW.h
RPXsuper.h
RRvision.h
rsdproto.h	Move LDSCRIPT definitions to board config files.	2010-12-09 10:27:41 +01:00
rsk7203.h	sh: Remove config.mk for rsk7203 board	2011-02-02 16:18:44 +09:00
s5p_goni.h	S5P: goni: Enable the pwm driver	2011-03-27 19:20:06 +02:00
s5pc210_universal.h	S5P: universal: Enable the pwm driver	2011-03-27 19:20:08 +02:00
sacsng.h
Sandpoint8240.h
Sandpoint8245.h
sbc35_a9g20.h
sbc405.h
sbc2410x.h
sbc8240.h
sbc8260.h
sbc8349.h
SBC8540.h	85xx boards: Rename CONFIG_DDR_DLL to CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN	2011-01-14 01:32:19 -06:00
sbc8548.h
sbc8560.h	85xx boards: Rename CONFIG_DDR_DLL to CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN	2011-01-14 01:32:19 -06:00
sbc8641d.h	powerpc/86xx: Convert SBC8641 to use common SRIO init code	2011-01-14 01:32:21 -06:00
sc3.h
scb9328.h
SCM.h
seaboard.h	arm: Tegra2: Change mach-type to MACH_TYPE_SEABOARD due to mach-types.h update	2011-03-27 19:20:30 +02:00
sequoia.h
sh7757lcr.h	sh: add support for sh7757lcr board	2011-02-02 16:38:41 +09:00
sh7763rdp.h	sh: Remove config.mk for sh7763rdp board	2011-02-02 16:18:44 +09:00
sh7785lcr.h	sh: Remove config.mk for sh7785lcr board	2011-02-02 16:18:45 +09:00
shannon.h
sheevaplug.h
shmin.h	Merge branch 'master' of git://git.denx.de/u-boot-sh	2011-02-04 20:38:27 +01:00
SIMPC8313.h
SM850.h
smdk2400.h
smdk2410.h
smdk6400.h	SMDK6400: Fix CONFIG_SYS_INIT_SP_ADDR undefined	2011-03-27 19:19:00 +02:00
smdkc100.h	S5P: smdkc100: Enable the pwm driver	2011-03-27 19:20:03 +02:00
SMN42.h
socrates.h
sorcery.h
spc1920.h
SPD823TS.h
spear-common.h
spear3xx.h
spear6xx.h
spieval.h
stxgp3.h	85xx boards: Rename CONFIG_DDR_DLL to CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN	2011-01-14 01:32:19 -06:00
stxssa.h	85xx boards: Rename CONFIG_DDR_DLL to CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN	2011-01-14 01:32:19 -06:00
stxxtc.h
suen3.h
svm_sc8xx.h
SX1.h
SXNI855T.h
t3corp.h	ppc4xx: t3corp: Add support for the Xilinx DS617 flash chip	2010-12-17 09:43:23 +01:00
taihu.h
taishan.h
TASREG.h
tb0229.h
TB5200.h
tcm-bf518.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
tcm-bf537.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
tegra2-common.h	arm: Tegra2: Add support for NVIDIA Harmony board	2011-02-21 08:30:55 +01:00
TK885D.h
tnetv107x_evm.h
tny_a9260.h
TOP860.h
TOP5200.h
top9000.h	Merge branch 'master' of git://git.denx.de/u-boot-arm	2010-12-17 20:02:05 +01:00
Total5200.h
TQM85xx.h	85xx boards: Rename CONFIG_DDR_DLL to CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN	2011-01-14 01:32:19 -06:00
TQM823L.h
TQM823M.h
TQM834x.h
TQM850L.h
TQM850M.h
TQM855L.h
TQM855M.h
TQM860L.h
TQM860M.h
TQM862L.h
TQM862M.h
TQM866M.h
TQM885D.h
TQM5200.h	mpc52xx, charon: change mtd default partitions	2010-12-17 20:15:12 +01:00
TQM8260.h
TQM8272.h
trab.h
trizepsiv.h
tx25.h
uc100.h
uc101.h	Move LDSCRIPT definitions to board config files.	2010-12-09 10:27:41 +01:00
utx8245.h
v5fx30teval.h
v37.h
v38b.h
VCMA9.h
vct.h	MIPS: VCT: Fix enabling of unwanted options if networking or USB support are disabled	2011-02-05 17:15:05 +09:00
ve8313.h
versatile.h
virtlab2.h
vision2.h	MX5: Add initial support for MX53 processor	2011-02-02 00:54:41 +01:00
vme8349.h
VOH405.h
voiceblue.h
VOM405.h
VoVPN-GW.h
vpac270.h
W7OLMC.h
W7OLMG.h
walnut.h
WUH405.h
xaeniax.h
xilinx-ppc.h	xilinx-ppc4xx-generic: Use common u-boot.lds	2010-12-17 09:44:40 +01:00
xilinx-ppc405-generic.h
xilinx-ppc405.h
xilinx-ppc440-generic.h
xilinx-ppc440.h
xm250.h
xpedite517x.h
xpedite520x.h
xpedite537x.h	tsec: Revert to setting TBICR_ANEG_ENABLE by default for SGMII	2010-12-13 09:32:15 -06:00
xpedite550x.h	powerpc/8xxx: Refactor fsl_ddr_get_spd into common code from board	2011-04-04 09:24:41 -05:00
xpedite1000.h
yosemite.h
yucca.h
Yukon8220.h
zeus.h
zipitz2.h
ZPC1900.h
ZUMA.h
zylonite.h