Lokesh Vutla b5e01eecc8 ARM: AM43xx: GP_EVM: Add support for DDR3 ... GP EVM has 1GB DDR3 attached(Part no: MT41K512M8RH). Adding details for the same. Below is the brief description of DDR3 init sequence(SW leveling): -> Enable VTT regulator -> Configure VTP -> Configure DDR IO settings -> Disable initialization and refreshes until EMIF registers are programmed. -> Program Timing registers -> Program leveling registers -> Program PHY control and Temp alert and ZQ config registers. -> Enable initialization and refreshes and configure SDRAM CONFIG register Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>		2013-12-18 21:14:45 -05:00
..
am43xx	ARM: AM43xx: GP_EVM: Add support for DDR3	2013-12-18 21:14:45 -05:00
am335x	ARM: AM33xx+: Update ioregs to pass different values	2013-12-18 21:14:18 -05:00
am3517crane	i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework	2013-11-13 06:18:17 +01:00
beagle	Makefile: specifiy an explicite object name rather than $(BOARD).o	2013-11-17 14:11:30 -05:00
dra7xx	ARM: dra7_evm: Add SATA support	2013-12-04 08:12:36 -05:00
evm	i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework	2013-11-13 06:18:17 +01:00
omap5_uevm	ARM: omap5_uevm: Add SATA support	2013-12-04 08:12:09 -05:00
omap5912osk	board: ti: convert makefiles to Kbuild style	2013-10-31 13:26:44 -04:00
panda	pandaboard: 1/1] ARM:OMAP4+: panda-es: Support Rev B3 Elpida DDR2 RAM	2013-12-04 11:41:13 -05:00
sdp3430	board: ti: convert makefiles to Kbuild style	2013-10-31 13:26:44 -04:00
sdp4430	board: ti: convert makefiles to Kbuild style	2013-10-31 13:26:44 -04:00
ti814x	ARM: AM33xx+: Update ioregs to pass different values	2013-12-18 21:14:18 -05:00
ti816x	ARM: AM33xx+: Update ioregs to pass different values	2013-12-18 21:14:18 -05:00
tnetv107xevm	board: ti: convert makefiles to Kbuild style	2013-10-31 13:26:44 -04:00